Modifier and Type | Method and Description |
---|---|
SSRequest |
SSRequest.withEmergency(ListCBO value)
Set "Yes" if the system may be used in a case of emergency.
|
RFSystem |
RFSystem.withEmergency(ListCBO value)
Set "Yes" if the system may be used in a case of emergency.
|
Assignment |
Assignment.withEmergency(ListCBO value)
Set "Yes" if the system may be used in a case of emergency.
|
Antenna |
Antenna.withGeneric(ListCBO value)
Set "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model.
|
Transmitter |
Transmitter.withGeneric(ListCBO value)
Set "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model.
|
Receiver |
Receiver.withGeneric(ListCBO value)
Set "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model.
|
IntfReport |
IntfReport.withGPSAffected(ListCBO value)
Set whether the interference affects GPS reception.
|
IntfReport |
IntfReport.withHelpRequired(ListCBO value)
Set whether the user needs technical assistance from another organisation
to solve the interference.
|
Antenna |
Antenna.withHorzSidelobeSuppressed(ListCBO value)
Set if the sidelobe has been suppressed.
|
ExternalReference |
ExternalReference.withIsAttached(ListCBO value)
Set if the document, file or other "external" information is stored in
attachment to this message.
|
ExternalReference |
ExternalReference.withIsClassified(ListCBO value)
Set if the referenced information contains any classified data.
|
SSRequest |
SSRequest.withITUWaiver(ListCBO value)
Set if this is a satellite system that is exempt from submitting
notification to the Radiocommunication Bureau.
|
SSRequest |
SSRequest.withNTIACoordinationRequired(ListCBO value)
Set if this application requires coordination with the National Authority
for approval.
|
SSRequest |
SSRequest.withOperInvIntent(ListCBO value)
Set if the system is intended for the DoD operational inventory.
|
Assignment |
Assignment.withPrimaryStation(ListCBO value)
Set
|
T |
Common.withRedacted(ListCBO value)
Set In Data Item Redacted (US), indicate if any original, or authoritative,
data was omitted.
|
ExternalReference |
ExternalReference.withRepeat(ListCBO value)
Set In Data Item Repeat (US), indicate if the attached file should be
repeatedly viewed / listened to.
|
IntfReport |
IntfReport.withSatelliteAffected(ListCBO value)
Set whether the interference affects satellite reception.
|
Message |
Message.withSecondaryDatasets(ListCBO value)
Set In Data Item SecondaryDatasets, indicate if datasets referenced by the
primary dataset are included.
|
Antenna |
Antenna.withVertSidelobeSuppressed(ListCBO value)
Set whether a portion of the radiation from an antenna outside of the main
beam has been suppressed or eliminated..
|
SSRequest |
SSRequest.withWartimeUse(ListCBO value)
Set if the system is used in a wartime environment.
|
Modifier and Type | Method and Description |
---|---|
AntPattern |
AntPattern.withCalculated(ListCBO value)
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
|
AntGain |
AntGain.withCalculated(ListCBO value)
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
|
ObservedLobeAnalysis |
ObservedLobeAnalysis.withLobeSymmetric(ListCBO value)
Set In Data Item LobeSymmetric (US), indicate whether the sidelobe is
symmetric.
|
ObservedScanAnalysis |
ObservedScanAnalysis.withScanElevContinuous(ListCBO value)
Set In Data Item ScanElevContinuous (US), indicate the if the scan
elevation progression is a continuous sweep.
|
ObservedScanAnalysis |
ObservedScanAnalysis.withScansHorzContinuous(ListCBO value)
Set In Data Item ScanHorzContinuous (US), indicate the if the scan azimuth
progression is a continuous sweep.
|
AntMode |
AntMode.withSectBlanking(ListCBO value)
Set "Yes" if sector blanking is possible and "No" if it is not possible.
|
ObservedPolarisationAnalysis |
ObservedPolarisationAnalysis.withTiltAngleContinuous(ListCBO value)
Set whether the tilt angle variations are Discrete or Continuous.
|
Modifier and Type | Method and Description |
---|---|
Tuning |
Tuning.withExclusive(ListCBO value)
Set Yes if the assigned frequency should not be reused within the area of
exercise/operation.
|
StationLoc |
StationLoc.withLocationExcluded(ListCBO value)
Set "Yes" to indicate that the LocSatRef is to be excluded from the
location set for the current station.
|
Station |
Station.withPrimaryStation(ListCBO value)
Set whether this station is the station of primary regulatory interest.
|
Configuration |
Configuration.withRepeater(ListCBO value)
Set "Yes" for each receiver location when a station in the fixed or mobile
service is used primarily as a repeater.
|
Configuration |
Configuration.withSpectrumLink(ListCBO value)
Set whether the transmitter(s) communicate or interact with the receiver(s)
in this Configuration, i.e.
|
Modifier and Type | Method and Description |
---|---|
TelephoneFax |
TelephoneFax.withFax(ListCBO value)
Set "Yes" if the number is for a telefax.
|
TelephoneFax |
TelephoneFax.withPreferred(ListCBO value)
Set a code "Yes" for the preferred number(s) and a code "No" for the
others.
|
EMail |
EMail.withPreferred(ListCBO value)
Set a code "Yes" for the preferred address(es) and a code "No" for the
others.
|
Modifier and Type | Method and Description |
---|---|
JammingChannelProfile |
JammingChannelProfile.withExBlankingOn(ListCBO value)
Set In Data Item ExBlankingOn (US), indicate if external blanking is
enabled.
|
TimingDeconflictionProtocol |
TimingDeconflictionProtocol.withRequired(ListCBO value)
Set if a common timing deconfliction protocol is required for processing
the subject signal.
|
Modifier and Type | Method and Description |
---|---|
Point |
Point.withExcluded(ListCBO value)
Set "Yes" to indicate that the shape is to be excluded from the set.
|
Ellipse |
Ellipse.withExcluded(ListCBO value)
Set "Yes" to indicate that the shape is to be excluded from the set.
|
Polygon |
Polygon.withExcluded(ListCBO value)
Set "Yes" to indicate that the shape is to be excluded from the set.
|
Modifier and Type | Method and Description |
---|---|
static ListCBO |
ListCBO.fromValue(String v) |
static ListCBO |
ListCBO.valueOf(String name)
Returns the enum constant of this type with the specified name.
|
static ListCBO[] |
ListCBO.values()
Returns an array containing the constants of this enum type, in
the order they are declared.
|
Modifier and Type | Method and Description |
---|---|
ObservedERPAnalysis |
ObservedERPAnalysis.withContinuous(ListCBO value)
Set In Data Item Continuous (US), indicate whether pulse-to-pulse ERP
variations are Discrete or Continuous.
|
ConfigFreq |
ConfigFreq.withInBand(ListCBO value)
Set "Yes" if this frequency range is in compliance with the applicable
Frequency Allocation Table.
|
Modifier and Type | Method and Description |
---|---|
JammingPerformance |
JammingPerformance.withContinuousUpdate(ListCBO value)
Set if effectiveness data should be provided continually or just once.
|
JammingPlan |
JammingPlan.withLevel3Auth(ListCBO value)
Set In Data Item Level3Auth (US), indicate if a request should go directly
to third-level authorization.
|
Modifier and Type | Method and Description |
---|---|
Curve |
Curve.withCalculated(ListCBO value)
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
|
SpreadSpectrum |
SpreadSpectrum.withFreqBlocking(ListCBO value)
Set if the frequency hopping system is capable of blocking certain
frequencies.
|
Modifier and Type | Method and Description |
---|---|
StageLocation |
StageLocation.withExcluded(ListCBO value)
Set "Yes" to indicate that the shape is to be excluded from the set.
|
Modifier and Type | Method and Description |
---|---|
EndpointLocation |
EndpointLocation.withExcluded(ListCBO value)
Set whether the referenced Location is included or excluded at this diagram
endpoint.
|
TrunkingAssignment |
TrunkingAssignment.withIsRelinquished(ListCBO value)
Set the Yes if this is an existing assignment to be relinquished by the
trunked land mobile system.
|
DiagramEndpoint |
DiagramEndpoint.withPointToMultiPoint(ListCBO value)
Set "Yes" if the diagram endpoint participates in point-to-multipoint
links.
|
Trunking |
Trunking.withRequestForExpansion(ListCBO value)
Set if this application is a request for expansion.
|
Modifier and Type | Method and Description |
---|---|
Allocation |
Allocation.withAllocatedByFootnote(ListCBO value)
Set "Yes" if this service is allocated to this frequency band by footnote
(i.e., the only indication this service is allowed in this band is a
footnote).
|
Modifier and Type | Method and Description |
---|---|
Power |
Power.withCalculated(ListCBO value)
Set "Yes" if the power value(s) have been calculated, or "No" if they have
been measured.
|
TxMode |
TxMode.withJitterCapable(ListCBO value)
Set In Data Item JitterCapable (US), indicate whether the mode of the pulse
stream is jitter capable.
|
ObservedMOPAnalysis |
ObservedMOPAnalysis.withMOPContinuous(ListCBO value)
Set In Data Item US:MOPContinuous (US), indicate whether MOP or CW
modulation is Discrete or Continuous.
|
TxMode |
TxMode.withOccBwCalculated(ListCBO value)
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
|
ObservedPulseAnalysis |
ObservedPulseAnalysis.withPDContinuous(ListCBO value)
Set In Data Item PDContinuous (US), indicate whether pulse-to-pulse PD
variations are Discrete or Continuous.
|
ObservedPulseAnalysis |
ObservedPulseAnalysis.withPRIContinuous(ListCBO value)
Set In Data Item PRIContinuous (US), Indicate whether pulse-to-pulse PRI
variations are Discrete or Continuous.
|
ObservedRFAnalysis |
ObservedRFAnalysis.withRFContinuous(ListCBO value)
Set whether pulse-to-pulse RF variations are Discrete or Continuous.
|
Copyright © 2016 OpenSSRF.org. All rights reserved.