Package | Description |
---|---|
us.gov.dod.standard.ssrf._3_1.transmitter |
Modifier and Type | Method and Description |
---|---|
TxModulation |
TxModulation.withAMIdx(Double value)
Set the amplitude modulation index, which is a unitless value for an
amplitude modulation signal derived by dividing the peak modulating voltage
by the peak carrier voltage.
|
TxModulation |
TxModulation.withAMRMSIdx(Double value)
Set the RMS modulation index when analog or phase modulation is used and
the baseband consists of FDM channels or multiple subcarrier signals.
|
TxModulation |
TxModulation.withCarrierSuppression(Double value)
Set the amount of reduction of the signals carrier, as compared to a non
attenuated signal carrier.
|
TxModulation |
TxModulation.withCodePeriod(Double value)
Set the length of time of the pseudorandom code repetition period.
|
TxModulation |
TxModulation.withCodeRate(Double value)
Set the pseudorandom code rate.
|
TxModulation |
TxModulation.withDigitalModType(ListCMO value)
Set the type of digital modulation.
|
TxModulation |
TxModulation.withFMDeviationCode(ListCFM value)
Set the code that indicates the type of Root Mean Square (RMS) deviation
(multichannel or per-channel).
|
TxModulation |
TxModulation.withFMPeakFreqDev(Double value)
Set the peak frequency deviation when analog modulation is employed.
|
TxModulation |
TxModulation.withFMPeakModulationIdx(Double value)
Set the peak modulation index (deviation ratio) when using analog frequency
or phase modulation.
|
TxModulation |
TxModulation.withFMRMSFreqDev(Double value)
Set the Root Means Square (RMS) frequency deviation when frequency
modulation (FM) is employed and the base band consists of
frequency-division multiplexed (FDM) channels or multiple subcarrier
signals.
|
TxModulation |
TxModulation.withKeysAngle(Double value)
Set the keying angle for the digital/analog/hybrid data stream.
|
TxModulation |
TxModulation.withKeysDesc(String value)
Set a text description of the keying format for the digital/analog/hybrid
data stream.
|
TxModulation |
TxModulation.withLineCoding(ListCDF value)
Set the format used to represent binary digit sequencing when digital
modulation is used.
|
TxModulation |
TxModulation.withMaxBitRate(Double value)
Set the maximum bit rate in kilobits per second applicable to digital
communications systems.
|
TxModulation |
TxModulation.withMaxDevRatio(Double value)
Set the deviation ratio data applicable to frequency- or phase-modulation
equipment.
|
TxModulation |
TxModulation.withMUXLevel(Double value)
Set In Data Item US:MUXLevel (US), enter the signal power in dB referenced
to the baseband carrier for the companding of the multiplexed signal.
|
TxModulation |
TxModulation.withMUXScheme(String value)
Set In Data Item US:MUXScheme (US), enter a freetext description of the
multiplexing algorithm.
|
TxModulation |
TxModulation.withNumStates(Integer value)
Set the total number of states, e.g., 4 for 4-ary Phase Shift-Keying, 64
for 64 level Quadrature AM.
|
TxModulation |
TxModulation.withSidebandSuppressed(ListCSI value)
Set the sideband that is suppressed in a single sideband signal.
|
TxModulation |
TxModulation.withSidebandSuppression(Double value)
Set the amount that one or both of the sidebands of a signal are reduced
prior to transmission.
|
TxModulation |
TxModulation.withSymbolSize(Double value)
Set the number of bits in the symbols being generated.
|
Modifier and Type | Method and Description |
---|---|
Set<TxModulation> |
TxMode.getTxModulation()
Get the TxModulation
|
Modifier and Type | Method and Description |
---|---|
TxMode |
TxMode.withTxModulation(TxModulation... values)
Set the TxModulation
|
Modifier and Type | Method and Description |
---|---|
TxMode |
TxMode.withTxModulation(Collection<TxModulation> values)
Set the TxModulation
|
Copyright © 2016 OpenSSRF.org. All rights reserved.