- getAction() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Get the intended type of modification to the given code list..
- getAction() - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Get the action which triggered the transmission, or to be performed upon
reception, of this dataset..
- getActivationPower() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the signal level required to activate the loadset, for systems capable
of selecting multiple power thresholds by sub-band or other region of
interest..
- getActivationTime() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the minimum time required to trigger the jammer after start of signal
reception..
- getActualEffect() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Get the actual impact a jamming mission had on a specific target area..
- getActualPerformance() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Get In Data Item US:ActualPerformance (US), enter the assessed
effectiveness of the service request..
- getAdditionalChannelsRationale() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get a rationale for the additional channels (e.g., channel loading, queuing
times, or new users)..
- getAddress() - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Get the e-mail address..
- getAddress() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Get the Address
- getAddress() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Get the Address
- getAddress() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Get the Address
- getAdjacentChannelSelectivity() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the ratio in dB between the wanted signal and the maximum level of an
unwanted signal in the adjacent channel which still allows correct
reception of the wanted signal..
- getAdministration() - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Get the nation or regulatory body that administers this note..
- getAdministration() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the country and/or administration which registered the satellite..
- getAdministration() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Get the nation or regulatory body that administers this Table of
Allocations..
- getAdministration() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Get the Administration
- getAdministrative() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getAffectedCSA() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the responsible Combatant Commander for the geographic area where the
interference occurred and/or the victim's organization..
- getAffectedEquipment() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the nomenclature or description of equipment experiencing the
interference..
- getAgencyActionNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the "An" identifier used to track transactions..
- getAgencyCode() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Get the agency responsible for this status log entry..
- getAgencyComments() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the Agency remarks in the applications processed through the
Interdepartment Radio Advisory Committee (IRAC).
- getAgencySerialNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the externally-assigned unique identifier of a frequency assignment..
- getAgencySerialNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Get the externally-assigned unique identifier of a frequency assignment..
- getAgencySerialNum() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Get the externally-assigned unique identifier of a frequency assignment..
- getAllocatedByFootnote() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Get "Yes" if this service is allocated to this frequency band by footnote
(i.e., the only indication this service is allowed in this band is a
footnote).
- getAllocatedService() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Get a radiocommunication service recognized by an administration that is
allocated to this frequency band (e.g., "Fixed Service")..
- getAllocatedService() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Get a radiocommunication service recognized by an administration that is
allocated to this frequency band (e.g., "Fixed Service")..
- getAllocation() - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Get the Allocation
- getAllotChannel() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Get a TACAN channel or net number.
- getAllotFreq() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Get the AllotFreq
- getAllotment() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getAlternateIdentifier() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Get any alternate identifier for the document as needed..
- getAlternateName() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Get an alternate name or nickname for the organisation..
- getAltitudeMax() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Get the minimum or nominal height of the point above the terrain (also
known as "above ground level" AGL).
- getAltitudeMax() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Get the minimum or nominal height of the point above the terrain (also
known as "above ground level" AGL).
- getAltitudeMax() - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Get .
- getAltitudeMin() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Get the minimum or nominal height of the point above the terrain (also
known as "above ground level" AGL)..
- getAltitudeMin() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Get the minimum or nominal height of the point above the terrain (also
known as "above ground level" AGL)..
- getAltitudeMin() - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Get .
- getAMIdx() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get the amplitude modulation index, which is a unitless value for an
amplitude modulation signal derived by dividing the peak modulating voltage
by the peak carrier voltage.
- getAMRMSIdx() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get the RMS modulation index when analog or phase modulation is used and
the baseband consists of FDM channels or multiple subcarrier signals.
- getAntEfficiency() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the AntEfficiency
- getAntenna() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
Get the reference to an Antenna in this configuration.
- getAntenna() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getAntennaHeight() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Get the antenna height above the ground level.
- getAntFeedpointHeight() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get the antenna feed point height above the terrain, in metres.
- getAntFeedpointHeight() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntryLocation
-
Get the antenna feed point height above the terrain, in metres.
- getAntFreqs() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the AntFreqs
- getAntGain() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the AntGain
- getAntHardware() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the AntHardware
- getAntMode() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the AntMode
- getAntPattern() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the AntPattern
- getAntPatternPoint() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Get the AntPatternPoint
- getAntStabilisation() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Get the method by which the jamming antenna beam is focused..
- getAntStructureHeight() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get the overall height, of the antenna support structure above ground
level..
- getAntType() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the type of antenna..
- getApertureDiameter() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the cross-section of an antenna radiation pattern in the direction of
highest gain..
- getApplicationDate() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the date on which the application will be submitted to the appropriate
spectrum management office..
- getApplicationSPSNumber() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the application Spectrum Planning Subcommittee (SPS) document
identifier assigned by NTIA.
- getApprovalLevel() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the approval status of the JRFL entry..
- getApprovalSPSNum() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the Certification of Spectrum Support Spectrum Planning Subcommittee
(SPS) document identifier assigned by NTIA.
- getApprovedBy() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the identifier of the designated expert who last approved or accepted
the dataset.
- getApprovedDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the last date and time, based on Greenwich Mean Time (GMT), that the
dataset was approved or accepted by a designated expert.
- getAsgnAllotOwner() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the US:AsgnAllotOwner
- getAsgnAllotRef() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
- getAsset() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
Get a reference to a Transmitter, Receiver, Antenna, RFSystem used by this
ForceElement, or to a ForceElement carried by or belonging to this
ForceElement..
- getAssets() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get the Assets
- getAssigned() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Get the Assigned
- getAssignment() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Get a reference to an Assignment that is paired with this AsgnAllot in a
repeater, duplex link or frequency diversity capability..
- getAssignment() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getAssignmentAllotment() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the Serial reference of the Assignment or Allotment to be protected.
- getAssignmentAuthority() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the user acceptance of host-nation or NATO HQ frequency nominations..
- getAssignmentDate() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the date the assignment was most recently authorized..
- getAssignmentRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
- getAtWaypoint() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the AtWayPoint
- getAuthor() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Get the name of the author of the reference, if it cannot be covered by a
ContactRef..
- getAuthor() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Get the title (e.g., Ms., Dr.) and name of the individual that is the
source of the comment..
- getAuthorised() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
Get the authorised quantity of the referenced equipment or system..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Get In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- getAvailable() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
Get the available quantity of the referenced equipment or system..
- getAvgPowerMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get the maximum average power.
- getAvgPowerMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get the minimum or nominal average power..
- getAxialRatio() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the ratio of the polarisation ellipse major axis to its minor axis
expressed in decibels..
- getAzBoresightAngle() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the position of the emitter Mainbeam (aka, Mainlobe) boresight
referenced from true north for ground based fixed emitters, and the emitter
defined centerline for other platforms (e.g., mobile, airborne,
shipborne)..
- getAzimuth() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Get the angle of the semi-major axis in the horizontal plane, measured from
true North..
- getAzScanChangeRate() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the rate of change for horizontal Scan Period variations expressed in
Scan Period change per unit of time.
- getAzScanRateExtremeMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the range of horizontal scan rate values that represent 100% of the
signal observed Scan values obtained from a statistical study of a data
set.
- getAzScanRateExtremeMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the range of horizontal scan rate values that represent 100% of the
signal observed Scan values obtained from a statistical study of a data
set.
- getAzScanRateMean() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the average horizontal scan rate value for a signal that changes
horizontal scan rates on a non-patterned basis..
- getAzScanRateMedian() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the horizontal scan rate that the signal most often used, based on a
statistical study of a data set..
- getAzScanSector() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the total angular width in the horizontal plane (aka, azimuth) the
subject emitter antenna mainbeam (aka, mainlobe) scans/covers in one
complete scan.
- getAzScanSectorMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the total angular width in the horizontal plane (aka, azimuth) the
subject emitter antenna mainbeam (aka, mainlobe) is capable of scanning..
- getAzScanVelocity() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the horizontal angular speed (i.e., degrees per second) of the subject
emitter Mainbeam (aka., mainlobe) scan referenced to a fixed point..
- getAzStart() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Get the start azimuth angle for the blanked sector.
- getAzStop() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Get the stop azimuth angle for the blanked sector.
- getBandwidth() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Get In Data Item Bandwidth, as an alternative to FreqMin/FreqMax, enter the
total operating bandwidth of the Antenna centered around FreqMin..
- getBandwidth() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the width of the range (or band) of restricted frequency(s)..
- getBaseband() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the Baseband
- getBaseband() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the Baseband
- getBeamType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get one of the codes describing the shape or type of the antenna main
beam..
- getBeamType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Get In Data Item BeamType (US), indicate the pattern beam type that best
represents the general shape of the beam as it radiates from the antenna.
- getBearing() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Get the bearing of the target in degrees referenced to the "boresight" of
the jammer equipment or the platform that the jammer equipment is mounted
on..
- getBitDuration() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Get the period of elapsed time, per bit instance, before change of states..
- getBitDuration() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Get the shortest time interval (within a pulse for pulsed signals) that a
discrete frequency, phase, or amplitude value stays at its state before
changing to a new one..
- getBitRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Get the rate at which the signal exhibits a change of FREQ/PHASE/AMP;
inverse of the minimum bit duration (e.g., a signal that has a .977 usec
minimum bit has a bit rate of 1024 kbit/sec)..
- getBlanking() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get the Blanking
- getBurstDuration() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the pulse burst duration..
- getBurstNumPulses() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the number of pulses in a single pulse burst..
- getBurstOffTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the pulse burst off time in microseconds (duration of time between the
end of one pulse burst to the start of the next pulse burst)..
- getBurstRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the number of pulse bursts per second..
- getBw() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Get the bandwidth measurement of the curve values..
- getCalculated() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Get Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
- getCalculated() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Get Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
- getCalculated() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Get Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
- getCalculated() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Get "Yes" if the power value(s) have been calculated, or "No" if they have
been measured..
- getCallSign() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get the call sign assigned to the transmitting station.
- getCallSign() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the call sign assigned to the transmitting station.
- getCarrierSuppression() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get the amount of reduction of the signals carrier, as compared to a non
attenuated signal carrier..
- getCarrierWaveform() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the waveform that will be used for the carrier of the jamming signal..
- getCaseNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the CaseNum
- getCaseNum() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the CaseNum
- getCenterFreq() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the middle frequency in the band..
- getChangeDate() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.NarrowBandPlanning
-
Get the date this record is expected to be updated to comply with narrow
band transition plans..
- getChannel() - Method in class us.gov.dod.standard.ssrf._3_1.ChannelPlan
-
Get the serial of the referenced ChannelPlan..
- getChannelDwell() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the time the transmitter is on..
- getChannelFreq() - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Get one frequency in the channel plan..
- getChannelPlan() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getChannelPlan() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Get the ChannelPlanRef
- getChannelPlan() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Get the ChannelPlanRef
- getChannelPlanRef() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
- getChannelPlanRef() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
- getChannelSpacing() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the frequency increment between discrete channels..
- getChannelSpacing() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Get In Data Item ChannelSpacing (US)- enter the amount of bandwidth
allotted to each channel, measured as the spacing between center
frequencies (or wavelengths) of adjacent channels..
- getCharacteristics() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the interference characteristics..
- getChipRate() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the maximum generator rate used to encode/decode a Direct Sequence
spread spectrum signal..
- getChipRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the chip rate.
- getCircuitRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the US:CircuitRemarks
- getCityArea() - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Get the city of the address or an operational area name..
- getCityArea() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get the city of the address or an operational area name..
- getClassSimpleName() - Method in enum us.gov.dod.standard.ssrf.EDatasetType
-
Get the class type simple name
- getClazz() - Method in enum us.gov.dod.standard.ssrf.EDatasetType
-
Get the class type for this serial type.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.common.Remarks
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Get the classification of the current data item.
- getCls() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Get the classification of the current data item.
- getClsAuthority() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Get the identity, by name and position, or by personal identifier, of the
original classification authority..
- getClsDerived() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Get the US:ClsDerived
- getClsOrg() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Get the organization of the original classification authority..
- getClsReason() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Get the reason(s) for the classification.
- getCmdLevel() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get the organisational level of the force element according to stratum,
echelon or point at which authority or control is maintained..
- getCOCOMGroup() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get PACOM to identify a grouping of frequencies having a like or similar
use.
- getCode() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Get the three-letter code of an existing Code List to be modified, or an
unused three-letter code in the case of the creation of a new Code List..
- getCode() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Get an alphanumeric combination that is used to identify a particular
Notation/Signal..
- getCode() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Get an alphanumeric combination that is used to identify a particular
Notation/Signal..
- getCodeList() - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Get the CodeList
- getCodeListCode() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Get the three-letter code of an existing Code List to be modified, or an
unused three-letter code in the case of the creation of a new Code List..
- getCodePeriod() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Get the length of time of the pseudorandom code repetition period..
- getCodeRate() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Get the pseudorandom code rate..
- getCodeRate() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the post encryption number of symbols per bit for a digital data
stream.
- getColourNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Get a Colour Number associated to the assigned frequency.
- getColourWord() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Get the Colour Word associated to the assigned frequency.
- getComment() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Get amplifying information to describe the Status of the Assignment..
- getComment() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Get the Comment
- getComments() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.RecordNote
-
Get the Amplifying conditional comments for the note as agreed to by the
Interdepartment Radio Advisory Committee (IRAC) Frequency Assignment
Subcommittee (FAS)..
- getCommentSource() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the CommentSource
- getCompMethod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get the method employed to reduce the period of the pulse..
- getCompRatio() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get the ratio of the uncompressed pulse width to the compressed pulse width
measured at the 50% amplitude (-3 dB) points..
- getConductedEmissions() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Get the power level of undesired signals generated in the receiver and
conducted by way of the connection to the receiver..
- getConfigApprovedBy() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get .
- getConfigApprovedDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get .
- getConfigEmission() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the US:ConfigEmission
- getConfigFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the ConfigFreq
- getConfigFreqUse() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Get .
- getConfigID() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get a short name for the configuration; this name should be a meaningful
identification of the configuration, but it can also be automatically
generated in some systems.
- getConfigID() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get the unique identifier of one the configurations used by this Assignment
at this specific Station..
- getConfigID() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramLine
-
Get a reference to a Configuration associated with this line on the
diagram..
- getConfiguration() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the Configuration
- getConfiguration() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Get the Configuration
- getConfiguration() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the Configuration
- getConfiguration() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the Configuration
- getConnectorType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Get the type of connector used to attach the antenna to the equipment or
the antenna to the transmission media that attaches the equipment to the
antenna..
- getContact() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Get the ContactRef
- getContact() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getContactRef() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
- getContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get In Data Item Continuous (US), indicate whether pulse-to-pulse ERP
variations are Discrete or Continuous.
- getContinuousUpdate() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Get if effectiveness data should be provided continually or just once..
- getControlRequestNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the control or request identifier that allows subordinate organizations
to track specific frequency applications..
- getCoordinationComments() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the Comments related to the external coordination of a frequency
assignment..
- getCoordinationData() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the US:CoordinationData
- getCoordinationNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get the US Military Communications-Electronics Board (MCEB) identifier
assigned to the equipment or system.
- getCoordinationNum() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the US Military Communications-Electronics Board (MCEB) identifier
assigned to the equipment or system.
- getCoordinationNum() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the US Military Communications-Electronics Board (MCEB) identifier
assigned to the equipment or system.
- getCoordIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CoordinationData
-
Get the coordinating entity..
- getCositeSep() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get the minimum required frequency separation between the equipment for
which the assignment is being made and any other equipment operating at the
same location.
- getCositeSepDescription() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get a free text description of the minimum required frequency separation
between a number of transmitters, or between a transmitter and a related
receiver in radio relay frequency requests..
- getCountry() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Manufacturer
-
Get the country or area in which the Manufacturer has its Headquarters..
- getCountry() - Method in class us.gov.dod.standard.ssrf._3_1.common.CaseNum
-
Get the nation or body who provided or assigned the case number..
- getCountry() - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Get the country or area code.
- getCountry() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get the country or area code.
- getCountry() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Get the country to which the Role belongs.
- getCountry() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Get the Country
- getCountryName() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.UsingCountries
-
Get the designator for a specific country associated with the emitter that
transmits the subject Notation/Signal.
- getCouplingLoss() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
Get the loss that occurs when energy is transferred between the
transmitter/receiver and the antenna..
- getCurrentStage() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the current stage of the system..
- getCurve() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Get the Curve
- getCurve() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get the Curve
- getCurvePoint() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Get the CurvePoint
- getCurves() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the list of indices referring to Curves applicable to the data item..
- getCurves() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the list of indices referring to Curves applicable to the data item..
- getCutAngle() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Get the angle of the pattern cut.
- getCutType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Get the type of the pattern cut.
- getData() - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Get .
- getDataset() - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Get the Dataset
- getDatasetRef() - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
- getDataSource() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the source or organization from which the data record was received..
- getDate() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Get the previous frequency assignment Government Master File (GMF)
authorization date..
- getDate() - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Get the date of the source document..
- getDate() - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Get the date of the permitted downgrading..
- getDate() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Get the publication date of the external reference.
- getDate() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Get the date the comment was provided..
- getDateApprovalRequired() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Get the date by which the approval of the application is desired.
- getDateReceivedByCountry() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the date the request was received by the Host Nation Administration..
- getDateResponseRequired() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Get the date by which the frequency assignment or Spectrum Supportability
Reply is required by the user in order to complete necessary advanced
operation coordination..
- getDateResponseRequired() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the date by which the Assignment or SSReply is required by the
requestor..
- getDateResponseRequired() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the date by which the frequency assignment or Spectrum Supportability
Reply is required by the user in order to complete necessary advanced
operation coordination..
- getDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Get the date and UTC time of this status log entry..
- getDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Get the date and time that the force element is at the selected waypoint..
- getDaysOfMonth() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the day of month [1-31] when the Assignment will be guarded (monitored)
or used for transmission..
- getDaysOfMonth() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the day of month [1-31] that the Force element is planned for
deployment..
- getDaysOfMonth() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Get the day of month [1-31]..
- getDaysOfMonth() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the day of month [1-31]..
- getDaysOfWeek() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the weekday [0-7 where 0 and 7 are for Sunday, 1 for Monday, etc] when
the Assignment will be guarded (monitored) or used for transmission..
- getDaysOfWeek() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the weekday [0-7 where 0 and 7 are for Sunday, 1 for Monday, etc] that
the Force element is planned for deployment..
- getDaysOfWeek() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Get the weekday [0-7 where 0 and 7 are for Sunday, 1 for Monday, etc]..
- getDaysOfWeek() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the weekday [0-7 where 0 and 7 are for Sunday, 1 for Monday, etc]..
- getDCSTrunk() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Get the US:DCSTrunk
- getDeclsDate() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Get the declassification date for DEDATE and DE25Xn-based declassification
instructions..
- getDeclsEvent() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Get the declassification event, when necessary based on the
declassification instructions..
- getDeclsType() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Get the declassification instructions of the dataset.
- getDefault() - Static method in class us.gov.dod.standard.ssrf.SSRFProperties
-
Get an instance of the default SSRF properties configuration.
- getDeployment() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Get the Deployment
- getDeployment() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Get the Deployment
- getDeployment() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get the Deployment
- getDescription() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Code
-
Get In Data Item Description, the long text name of the code entry or a
brief description of the entry to be created or modified..
- getDescription() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Get the description of the intended contents of new code list, and the
element(s) where it will be used..
- getDescription() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
Get free text Contact information for legacy applications.
- getDescription() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Project
-
Get any additional amplifying information about the project..
- getDescription() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get a description of the operational mode; this description should be a
meaningful explanation of the mode main characteristics..
- getDescription() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
Get the name of an individual or organization related to the frequency
assignment..
- getDescription() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get a description of the operational configuration.
- getDescription() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get a general description of the Dataset that is inheriting Common.
- getDescription() - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Get the title for the address; for an Organisation, it can be the name of
the specific Branch or office; for a Contact or a Role, it can be the job
title associated to the address..
- getDescription() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Get a description of the timing deconfliction protocol..
- getDescription() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get a description of the operational mode; this description should be a
meaningful explanation of the mode main characteristics..
- getDescription() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Get a human-readable description of a diagram endpoint..
- getDescription() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get a description of the operational mode; this description should be a
meaningful explanation of the mode main characteristics..
- getDesiredEffect() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Get the expected impact a jamming mission will have on a specific target
area..
- getDesiredPerformance() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Get the desired effectiveness of the service request.
- getDetailedFunction() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Get .
- getDiagramEndpoint() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the DiagramEndpoint
- getDiagramLine() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the DiagramLine
- getDiameter() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the cross-section of an antenna radiation pattern in the direction of
highest gain..
- getDigitalModType() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Get the type of digital modulation..
- getDir() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPatternPoint
-
Get the direction in degrees in reference to the pointing angle of the
antenna set to zero..
- getDirection() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the sweep direction from the center frequency..
- getDispatcher() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get if a Dispatcher accesses base stations or repeaters in the trunked land
mobile system..
- getDispatcherExplanation() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get how the dispatcher accesses the base station or repeater..
- getDistributionGroups() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get In Data Item DistributionGroups (US), identify to whom the signed
certification should be distributed (e.g., "J-12 Holders")..
- getDocketNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the US:DocketNum
- getDocketNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Get the previous frequency assignment Government Master File (GMF)
authorization docket number..
- getDocumentCls() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Get the classification level of the Reference..
- getDowncls() - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Get the classification level of the dataset after downgrading..
- getDowngrade() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Get the US:Downgrade
- getDowngradeInfo() - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Get additional downgrading information, if any..
- getDuplexSep() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Get the minimum or exact duplex frequency separation.
- getDuplexSep() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get the minimum or exact duplex frequency separation.
- getDuplexSepType() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Get if the frequency separation must be exactly, or at the minimum, the
amount specified..
- getDuplexSepType() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get if the frequency separation must be exactly, or at the minimum, the
amount specified..
- getDuration() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the number of minutes for which an event will live.
- getDuration() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the number of minutes for which an event will live.
- getDuration() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Get the number of minutes for which an event will live.
- getDuration() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the number of minutes for which an event will live.
- getDuration() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Get the amount of time the frequency is being monitored or jammed..
- getDuration() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Get the period of dwell for the baseband audio frequency, before it is
disabled or switched..
- getDutyCycleMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get as a percentage, the maximum ratio of the pulse duration to the pulse
period.
- getDutyCycleMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get as a percentage, the minimum or nominal ratio of the pulse duration to
the pulse period..
- getDwell() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the frequency range dwell time; how long a sweep pauses on a particular
frequency before moving to next technique..
- getDwellTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the dwell time at any RF when the RF dwells at particular values for
more than one pulse in a row..
- getEarthCoverage() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get the area of earth coverage..
- getEarthStation() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the EarthStation
- getEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Get the date by which the dataset is to be operational or effective..
- getEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Get the date by which the dataset is to be operational or effective..
- getEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Get the date by which the dataset is to be operational or effective..
- getEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get the date by which the dataset is to be operational or effective..
- getEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Get the date this note comes in force..
- getEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Get the date by which the dataset is to be operational or effective..
- getEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Get the date by which the dataset is to be operational or effective..
- getEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the date by which the dataset is to be operational or effective..
- getEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Get the date by which the dataset is to be operational or effective..
- getEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Get the date by which the dataset is to be operational or effective..
- getEffectiveDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the date and UTC time when the Assignment will be operational..
- getEffectiveDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Get the width of the range (or band) of restricted frequency(s)..
- getEfficiency() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntEfficiency
-
Get the efficiency of the antenna within the frequency range which is being
reported..
- getEIRPMax() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the maximum effective isotropic radiated power (EIRP) radiated from the
transmitter antenna.
- getEIRPMax() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get the maximum effective isotropic radiated power (EIRP) radiated from the
transmitter antenna.
- getEIRPMin() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the minimum or nominal effective isotropic radiated power (EIRP)
radiated from the transmitter antenna.
- getEIRPMin() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get the minimum or nominal effective isotropic radiated power (EIRP)
radiated from the transmitter antenna.
- getElevScanChangeRate() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get In Data Item Vertical Scan Change Rate (US), enter the rate of change
for vertical Scan Period variations expressed in Scan Period change per
unit of time.
- getElevScanRateExtremeMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get In Data Item Extreme Vertical Scan Rate Max (US), enter the range of
vertical scan rate values that represent 100% of the signal observed Scan
values obtained from a statistical study of a data set.
- getElevScanRateExtremeMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get In Data Item Extreme Vertical Scan Rate Min (US), enter the range of
vertical scan rate values that represent 100% of the signal observed Scan
values obtained from a statistical study of a data set.
- getElevScanRateMean() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the average vertical scan rate value for a signal that changes vertical
scan rates on a non-patterned basis..
- getElevScanRateMedian() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the vertical scan rate that the signal most often used, based on a
statistical study of a data set..
- getElevScanSector() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the total angular width in the vertical plane (aka, elevation) the
subject emitter antenna mainbeam (aka, mainlobe) scans/covers in one
complete scan.
- getElevScanSectorMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the total angular width in the vertical plane (aka, elevation) the
subject emitter antenna mainbeam (aka, mainlobe) is capable of scanning..
- getElevScanVelocity() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the vertical angular speed (i.e., degrees per second) of the subject
emitter Mainbeam (aka., mainlobe) scan referenced to a fixed point..
- getElevStart() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Get the start elevation angle for the blanked sector.
- getElevStop() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Get the stop elevation angle for the blanked sector.
- getEllipse() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get the Ellipse
- getEMail() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Get the Email
- getEMail() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Get the Email
- getEMail() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Get the Email
- getEmergency() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get "Yes" if the system may be used in a case of emergency..
- getEmergency() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Get "Yes" if the system may be used in a case of emergency..
- getEmergency() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get "Yes" if the system may be used in a case of emergency..
- getEmission() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Get the Emission
- getEmsClass() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Emission
-
Get a three to five characters code, derived from the table below,
representing the emission classification.
- getEmsClass() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigEmission
-
Get a three to five characters code, derived from the table below,
representing the emission classification.
- getEmsClass() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the EmsClass
- getEmsClass() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the EmsClass
- getEndpointID() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Get an identifier for each icon on the diagram.
- getEndpointLocation() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Get the EndpointLocation
- getEntryBy() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- getEntryByRole() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the serial of the Role which is creating the current dataset.
- getEntryDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the date and UTC Time the dataset was initially entered into the data
repository (e.g., FRRS for USA, SMIR for NATO).
- getEqpFnct() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
Get the equipment function..
- getERPActualMax() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the highest discrete ERP value which is found in a single piece of a
complete data (e.g., in a single intercept that contains the complete ERP
characteristics of the signal).
- getERPActualMin() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the lowest discrete ERP value which is found in a single piece of a
complete data (e.g., in a single intercept that contains the complete ERP
characteristics of the signal)..
- getERPAdaptiveDriverDesc() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the condition which controls, or can be associated with, the signal ERP
variations..
- getERPAdaptiveRuleDesc() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the rule which describes the signal ERP variations..
- getERPChangeRate() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the rate of change for ERP variations expressed in ERP change per unit
of time..
- getERPDwell() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPValues
-
Get the time duration for a complete dwell/group of pulses which all have
the same discrete ERP value, or for a continuous wave at a constant ERP
value..
- getERPExtremeMax() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the upper ERP value that represent 100% of the signal observed ERP
values which were obtained from a statistical study of a data set.
- getERPExtremeMin() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the lower ERP value that represent 100% of the signal observed ERP
values which were obtained from a statistical study of a data set..
- getERPMean() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the mean ERP value for a signal which changes ERP values on a
non-patterned basis..
- getERPMedian() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the observed ERP value, or the observed ERP values in the case of a
signal with multiple discrete/individual ERP values, that the signal most
often used based on a statistical study of a dataset.
- getERPNumber() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the Emergency Readiness Plan (ERP) Number.
- getERPPatternPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the time duration for one complete cycle of a repeating ERP sequence..
- getERPPatternType() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get In Data Item ERPPatternType (US), indicate whether ERP is unmodulated
ERP variations are Patterned, Non-Patterned, or Adaptive..
- getERPSequenceDesc() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get In Data Item ERP SequenceDesc (US), enter the textual description of
the observed algorithm for the sequence of variation for the ERP..
- getERPStdDev() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the standard deviation associated with the ERP Value data set that was
used to calculate ERPMean..
- getERPStep() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the delta between the Most Probable observed ERP values of adjacent and
discrete ERPs..
- getERPValue() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPValues
-
Get the ERP values that represent 95% of the signal observed ERP values for
each discrete ERP value which were obtained from a statistical study of a
data set..
- getEstimatedExpansionCost() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get the estimated cost of the expansion..
- getEvaluation() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get your best guess as to the cause of the interference..
- getExBlankingOn() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get In Data Item ExBlankingOn (US), indicate if external blanking is
enabled..
- getExcluded() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Get "Yes" to indicate that the shape is to be excluded from the set.
- getExcluded() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Get "Yes" to indicate that the shape is to be excluded from the set.
- getExcluded() - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Get "Yes" to indicate that the shape is to be excluded from the set.
- getExcluded() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.StageLocation
-
Get "Yes" to indicate that the shape is to be excluded from the set.
- getExcluded() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Get whether the referenced Location is included or excluded at this diagram
endpoint..
- getExclusive() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Get Yes if the assigned frequency should not be reused within the area of
exercise/operation..
- getExpansionTargetDate() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get the date this expansion will be activated (i.e., the date the system
will require the additional radio frequencies)..
- getExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Get the date at which the dataset will expire.
- getExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Get the date at which the dataset will expire.
- getExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get the date at which the dataset will expire.
- getExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Get the date this note goes out of force..
- getExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Get the date at which the dataset will expire.
- getExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Get the date at which the dataset will expire.
- getExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the date at which the dataset will expire.
- getExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Get the date at which the dataset will expire.
- getExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Get the date at which the dataset will expire.
- getExpirationDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the date and UTC time that this Assignment will expire.
- getExpirationDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Get In Data Item ExpirationDateTime, In Data Item ExpirationDateTime, enter
the date at which the dataset will expire, formatted as yyyy-mmddThh:
mm:ssZ (year-month-day, "T" for time, hour:minute:seconds Zulu).
- getExplainInformationTypeX() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Get a reference to a Remark that describes the Type of Information.
- getExplainModulationTypeX() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Get a reference to a Remark that describes the Type of Modulation.
- getExplainNatureOfSignalX() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Get a reference to a Remark that describes the Nature of Signal.
- getExternalReference() - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
Get a value that is most probably correct..
- getExternalReference() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getExtReferenceRef() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the ExtReferenceRef
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Get a list of Common/ExtReferenceRef idx values applicable to the current
data item.
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Get a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item..
- getFallTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the time required for a pulse to fall from 90% to 10 percent of the
mean peak amplitude of its voltage waveform/envelope..
- getFallTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get the pulse fall time from 90 to 10 percent of the pulse..
- getFASNumber() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the Interdepartment Radio Advisory Committee (IRAC) Frequency
Assignment Subcommittee (FAS) identifier assigned by NTIA..
- getFax() - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Get "Yes" if the number is for a telefax.
- getFCCAcceptanceNum() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Get the Federal Communication Commission (FCC) ID of FCC authorised
equipment..
- getFCCAcceptanceNum() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get the Federal Communication Commission (FCC) ID of FCC authorised
equipment..
- getFCCFileNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the file number assigned by the Federal Communications Commission
(FCC), issued to non-government stations operating on government
frequencies or government stations operating on nongovernment frequencies,
which is unique to each FCC license..
- getFEDeployment() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getFeedlineLength() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get the length of the antenna feed line..
- getFeedlineLoss() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get the total loss of the antenna feed line..
- getFeedOrientation() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Get the orientation of the feed when looking in the direction of the
boresight.
- getFeedType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Get the element used to "illuminate" the reflector for an antenna unit..
- getFERef() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the dataset identifier of the ForceElement being deployed..
- getFFTType() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the form of the Fast Fourier Transform used (e.g., Integral, Serial,
Discrete)..
- getFieldedStatus() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Get the current stage of the RFSystem..
- getFilter() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get a brief description of the type of the output filter..
- getFirstName() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Get the first name of the contact individual..
- getFMDeviationCode() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get the code that indicates the type of Root Mean Square (RMS) deviation
(multichannel or per-channel)..
- getFMPeakFreqDev() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get the peak frequency deviation when analog modulation is employed..
- getFMPeakModulationIdx() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get the peak modulation index (deviation ratio) when using analog frequency
or phase modulation..
- getFMRMSFreqDev() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get the Root Means Square (RMS) frequency deviation when frequency
modulation (FM) is employed and the base band consists of
frequency-division multiplexed (FDM) channels or multiple subcarrier
signals..
- getFMSCNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the assignment serial number as registered in the Frequency Management
Subcommittee (FMSC) Master Radio Frequency List (MRFL)..
- getFootnote() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Get the Footnote
- getFootnotes() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Get a list containing each Footnote index that is applicable to the current
band Allocation.
- getFootnotes() - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Get a list containing each Footnote index applicable to the current
frequency band.
- getFootnoteType() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Get the type or source of the Footnote..
- getForceElement() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the dataset identifier of the ForceElement being deployed..
- getForceElement() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getFreq() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Get the frequency at which the gain is expressed..
- getFreq() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.VSWR
-
Get the specific frequency at which the VSWR measurement was taken.
- getFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Get the Freq
- getFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Get the paired frequency for the repeater, duplex link or frequency
diversity capability..
- getFreq() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Get the subcarrier frequency..
- getFreqBand() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Get the FreqBand
- getFreqBlocking() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get if the frequency hopping system is capable of blocking certain
frequencies..
- getFreqConst() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Get a frequency offset (positive or negative)..
- getFreqConversion() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the FreqConversion
- getFreqFactor() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Get a positive numeric multiplier of the carrier frequency.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Get the maximum value of the frequencies in the range.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntEfficiency
-
Get the maximum value of the frequencies in the range.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Get the maximum value of the frequencies in the range.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Get .
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the maximum value of the frequencies in the range.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the target frequency range maximum value.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Get the maximum value of the frequencies in the range.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Get the frequency range maximum value planned for denial of use.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Get the frequency range maximum value planned for denial of use.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Get the highest value of the curve frequency range.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Get the maximum value of the frequencies in the range.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the maximum value of the frequencies in the range.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get the upper frequency of band.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Get the upper frequency of band.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Get the maximum value of the frequencies in the range.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the upper end of the range of RF values that represent 100% of observed
signals.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Get the maximum value of the frequencies in the range.
- getFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Get the maximum value of the frequencies in the range.
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Get the nominal frequency or minimum value of the frequency range..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntEfficiency
-
Get the nominal frequency or minimum value of the frequency range..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Get the nominal frequency or minimum value of the frequency range..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Get .
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the nominal frequency or minimum value of the frequency range..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the target discrete frequency, or frequency range minimum value..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Get the nominal frequency or minimum value of the frequency range..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Get the frequency range minimum value planned for denial of use..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Get the discrete frequency, or frequency range minimum value, planned for
denial of use..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Get the lowest value of the curve frequency range..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Get the nominal frequency or minimum value of the frequency range..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the nominal frequency or minimum value of the frequency range..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get the lower frequency of band or discrete frequency..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Get the lower frequency of band or discrete frequency..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Get the nominal frequency or minimum value of the frequency range..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the lower end of the range of RF values that represent 100% of observed
signals..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Get the nominal frequency or minimum value of the frequency range..
- getFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Get the nominal frequency or minimum value of the frequency range..
- getFreqOffset() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Get the frequency differential from the subcarrier frequency..
- getFreqOld() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Get the FreqOld
- getFreqRest() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Get the dwell or pause frequency utilised while processing the subcarrier.
- getFreqSep() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Get the required minimum or exact frequency separation..
- getFreqSepType() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Get if the stated frequency separation is an exact or minimum value..
- getFreqTolerance() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the drift in Hz or in ppm using the formula: Frequency tolerance (ppm)
= Maximum drift (Hz) / Center frequency (MHz).
- getFreqTolerance() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the drift in Hz or in ppm using the formula: Frequency tolerance (ppm)
= Maximum drift (Hz) / Center frequency (MHz).
- getFreqToleranceUnit() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the units in which the Frequency Tolerance is expressed..
- getFreqToleranceUnit() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the units in which the Frequency Tolerance is expressed..
- getFrequencyActionOfficer() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get a MILDEP code identifying the person or group responsible for the
frequency assignment..
- getFreqUse() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Get if the frequency range is used for transmit, receive, or both transmit
and receive..
- getFreqUse() - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Get .
- getFreqUse() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the intended usage of the frequency..
- getFrontToBackRatio() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Get the front-to-back ratio of the main beam to the back lobe..
- getFunction() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Get Data item Function is not used by US except when exchanging with NATO.
- getGain() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Get the antenna gain (in dBi - dB with reference to an isotropic source) in
the direction of maximum radiation.
- getGain() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPatternPoint
-
Get the amount of gain for the direction relative to the main beam gain..
- getGeneric() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model..
- getGeneric() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Get "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model..
- getGeneric() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model..
- getGeoAltitude() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the altitude of the geostationary satellite, relative to Mean Sea Level
(MSL)..
- getGeoDescription() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Get a textual description of the geographic locations where this equipment
will be used during this stage..
- getGeoNominalLon() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the longitude of the geostationary satellite in the following format:
dddmmss[.hh]H, where H represents "E" for East or "W" for West..
- getGPSAffected() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get whether the interference affects GPS reception..
- getGpsNBL1Level() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the narrowband levels emitted by this system in the Navstar Global
Positioning System (GPS) 1164-1240 MHz band..
- getGpsNBL2Level() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the narrowband levels emitted by this system in the Navstar Global
Positioning System (GPS) 1559-1610 MHz band..
- getGpsWBL1Level() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the wideband levels emitted by this system in the Navstar Global
Positioning System (GPS) 1164-1240 MHz band..
- getGpsWBL2Level() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the wideband levels emitted by this system in the Navstar Global
Positioning System (GPS) 1559-1610 MHz band..
- getGuardBand() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the RF band between carriers which is not used.
- getHelpRequired() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get whether the user needs technical assistance from another organisation
to solve the interference.
- getHopDwell() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the length of time the frequency hopping system dwells on a frequency..
- getHopRate() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the rate at which the frequency hopping system hops from one frequency
to another frequency..
- getHorzAperture() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the horizontal cross-section of the antenna radiation pattern in the
direction of highest gain..
- getHorzBwMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the maximum horizontal beamwidth for beamwidths which vary with the
frequency.
- getHorzBwMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Get the maximum angle of the horizontal component of the antenna mainbeam
measured at the half-power (-3 dB) point of its maximum horizontal width.
- getHorzBwMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the minimum or nominal horizontal beamwidth..
- getHorzBwMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Get the minimum angle of the horizontal component of the antenna mainbeam
measured at the half-power (-3 dB) point of its maximum horizontal width..
- getHorzDimension() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the linear horizontal dimension of the antenna..
- getHorzScanRate() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the number of complete scans the antenna is capable of making each
minute..
- getHorzScanSector() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the maximum horizontal sector the antenna can scan (enter 360 for a
full rotation)..
- getHorzScanSpeed() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the number of degrees per second the antenna is capable of scanning.
- getHorzScanType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the antenna horizontal scanning capability..
- getHorzSidelobeAttenuation() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the amount of suppression relative to the main beam gain of the
antenna..
- getHorzSidelobeAz() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the direction of the sidelobe in reference to the direction of maximum
gain..
- getHorzSidelobeSuppressed() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get if the sidelobe has been suppressed.
- getHostComments() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CoordinationData
-
Get the Comments from the coordinating entity..
- getHostDocketNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the US:HostDocketNum
- getHostNation() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the HostNation
- getHours() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the hours of day [0-23] (UTC time) when the Assignment will be guarded
(monitored) or used for transmission..
- getHours() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the hours of a day [0-23] (UTC time) that the Force element is planned
for deployment..
- getHours() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Get the hours of a day [0-23] (UTC time)..
- getHours() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the hours of a day [0-23] (UTC time)..
- getIconPosLeft() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Get the X coordinate of the icon in twips.
- getIconPosTop() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Get the Y coordinate of the icon in twips." to read, "In Data Item
IconPosTop, enter the Y coordinate of the icon in twips.
- getIconType() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Get the type of icon for the diagram endpoint..
- getIdentifier() - Method in class us.gov.dod.standard.ssrf._3_1.common.CaseNum
-
Get the case number..
- getIdentifier() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Get any alternate identifier for the document as needed..
- getIdentifier() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Get an identifier for this Footnote (e.g., US2, 5.441).
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Get a unique identifier for each Data Item in the Dataset.
- getIdref() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Get a unique identifier for each Data Item in the Dataset.
- getIdx() - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
Get a unique index for each External Reference used by this Dataset.
- getIdx() - Method in class us.gov.dod.standard.ssrf._3_1.common.Remarks
-
Get a unique index for each Remark used by this Dataset.
- getIdx() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Get a unique integer index for the current ellipse within the geometric
shape..
- getIdx() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Get the sequential index of a Point within the referenced Location.
- getIdx() - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Get a unique integer index for the current ellipse within the Location..
- getIdx() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Get .
- getIdx() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Get a unique index for each Curve used by this Dataset.
- getIdx() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Get a unique index for each Comment used by this Dataset.
- getIdx() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Get a unique index for each Footnote used by this Dataset.
- getIFMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Get the maximum value of the intermediate frequencies.
- getIFMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Get the nominal intermediate frequency or minimum value of the intermediate
frequency range..
- getImageRejection() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the ratio of the image frequency signal level required to produce a
specified output, to the desired signal level required to produce the same
output.
- getInBand() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Get "Yes" if this frequency range is in compliance with the applicable
Frequency Allocation Table.
- getInfoDataRate() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the information data rate..
- getInfoTransferRequirement() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the required character rates, data rates, and circuit
quality/reliability of the system..
- getInitialCost() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Get the estimated initial cost, in US dollars, of the system/equipment..
- getInitialCost() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the estimated initial cost, in US dollars, of the system/equipment..
- getInitialCostDesc() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the explanation of how the estimated initial cost for the system was
calculated..
- getInstallation() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Get the Installation
- getInstance(Class<? extends Common<?>>) - Static method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Get a Serial instance for the indicated class instance.
- getInstance(Class<? extends Common<?>>) - Static method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Get a TSerial instance for the indicated class instance.
- getInstance(String) - Static method in class us.gov.dod.standard.ssrf.SSRF
-
Standard method to get a fully qualified class instance.
- getInstantRFBW03() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the transmitter pulse bandwidth (burst or instantaneous) measured at
the 3 dB points (min).
- getInstantRFBW06() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the transmitter pulse bandwidth (burst or instantaneous) measured at
the 6 dB points (min).
- getInstantRFBW10() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the transmitter pulse bandwidth (burst or instantaneous) measured at
the 10 dB points (min).
- getInstantRFBW20() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the transmitter pulse bandwidth (burst or instantaneous) measured at
the 20 dB points (min).
- getIntermediateFunction() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Get .
- getIntermodEffect() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get .
- getIntermodEffect() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get .
- getIntermodPct() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get .
- getIntermodPct() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get .
- getIntermodRejection() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the rejection of spurious emissions involving the mixing of two or more
signals.
- getInternationalDesignator() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the externally-assigned International Designator for the satellite..
- getIntfDescr() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get In Data Item IntfDescr, describe the interference.
- getIntfPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get how often the interference is experienced..
- getIntfReport() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getIntfStartDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the date/time the interference was first perceived..
- getIntfStopDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the date/time the interference ceased..
- getIRACNumber() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the Interdepartment Radio Advisory Committee (IRAC) document number of
the NTIA Certification of Spectrum Support document.
- getIsAttached() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Get if the document, file or other "external" information is stored in
attachment to this message..
- getIsClassified() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Get if the referenced information contains any classified data..
- getIsRelinquished() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Get the Yes if this is an existing assignment to be relinquished by the
trunked land mobile system.
- getITURegComments() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Get amplifying comments related to registering an assignment with the
International Telecommunication Union (ITU) Radiocommunication Bureau
(BR)..
- getITURegDate() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Get the date the frequency assignment was registered with the International
Telecommunication Union (ITU) Radiocommunication Bureau (BR)..
- getITURegNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Get the registration number assigned by the International Telecommunication
Union (ITU) Radiocommunication Bureau (BR)..
- getITURegStatus() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Get the status of the Assignment ITU-R registration..
- getITUWaiver() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get if this is a satellite system that is exempt from submitting
notification to the Radiocommunication Bureau..
- getJ12Number() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Get the US Military Communications-Electronics Board (MCEB) identifier of a
superseded or related application..
- getJammingAuthority() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Get the US:JammingAuthority
- getJammingChannelProfile() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Get the US:JammingChannelProfile
- getJammingPerformance() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Get the US:JammingPerformance
- getJammingPlan() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Get the US:JammingPlan
- getJammingTarget() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get the US:JammingTarget
- getJCACallSign() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Get In Data Item JCACallSign (US), enter the unique net identifier for the
JCA.
- getJCAFreq() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Get In Data Item JCAFreq (US), enter the frequency assigned to the JCA.
- getJCALevel() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Get the level of joint control authorization (JCA) required for the jamming
plan..
- getJCALevel() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Get In Data Item JCALevel (US), enter the required level of authorisation
for the jamming plan..
- getJCAState() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Get an indication of the authorization condition for radiation of a jamming
plan..
- getJitterCapable() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get In Data Item JitterCapable (US), indicate whether the mode of the pulse
stream is jitter capable..
- getJobTitle() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Get the title or position of the comment author..
- getJRFL() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getJRFLEntry() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Get the JRFLEntry
- getJRFLEntryLocation() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the JRFLEntryLocation
- getJustification() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get a description of the justification of why the JRFL entry is required,
to support the spectrum manager..
- getJustifyShortRiseTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get an operational justification for short pulse rise time.
- getKeyLoadProcedure() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Get the sequence pattern for initializing the jamming equipment..
- getKeysAngle() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get the keying angle for the digital/analog/hybrid data stream..
- getKeysDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get a text description of the keying format for the digital/analog/hybrid
data stream..
- getLastChangeBy() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- getLastChangeByRole() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the serial of the Role which last modified the current dataset.
- getLastChangeDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the date and UTC Time the dataset was last modified.
- getLastName() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Get the last name of the contact individual..
- getLastObservedBy() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the identifier of the person or entity who last observed this signal
configuration..
- getLastObservedBy() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the identifier of the person or entity who last observed this Dataset.
- getLastReviewBy() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- getLastReviewByRole() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the Role reference serial of the person who last reviewed the dataset.
- getLastReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the last date that the dataset was reviewed.
- getLastReviewedBy() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the identifier of the person who last reviewed this configuration..
- getLastReviewedDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the date and time, based on Greenwich Mean Time (GMT), the
configuration was thoroughly reviewed..
- getLat() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Get the geographical latitude (degrees, minutes, seconds and hemisphere N
or S) of the Point or center of the Ellipse.
- getLat() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Get the geographical latitude (degrees, minutes, seconds and hemisphere N
or S) of the Point or center of the Ellipse.
- getLat() - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Get the geographical latitude (degrees, minutes, seconds and hemisphere N
or S) of the Point or center of the Ellipse.
- getLat() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Get the geographic latitude of the target location, including hemisphere
(H).
- getLatHemisphere(Number) - Method in class us.gov.dod.standard.ssrf._3_1.adapter.XmlAdapterLAT
-
Get the latitude hemisphere from a latitude in decimal degrees.
- getLaunchDate() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the date of the satellite launch..
- getLaunchLoc() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get a reference to a Location that identifies the satellite launch
location..
- getLaunchLocRef() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
- getLaunchStatus() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the status of the satellite..
- getLeadType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Get the type of device used for conducting or guiding the radio-frequency
energy from the transmitter or receiver to the antenna (e.g., continuous
waveguide)..
- getLegacyNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Get a legacy reference number associated with the assigned frequency..
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Get one or more special handling instructions in sentence format, not code
format.
- getLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Get one or more special handling instructions in sentence format, not code
format.
- getLevel() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Get the level of nomenclature (primary, nickname, etc)..
- getLevel() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.CurvePoint
-
Get a dB value (refer to data element Curve for use instructions)..
- getLevel3Auth() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get In Data Item Level3Auth (US), indicate if a request should go directly
to third-level authorization.
- getLineCoding() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Get the format used to represent binary digit sequencing when digital
modulation is used..
- getLink() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the Link
- getLinkID() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Get a unique identifier for the link.
- getLinkName() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Get a human readable name of the link..
- getListSerialNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the agency list serial number of a Government Master File (GMF) record
representing a group or area assignment.
- getLoadset() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the LoadsetRef
- getLoadset() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Get In Data Item LoadsetRef (US), the serial of a Loadset dataset that
contains the details to be used for this jamming instance..
- getLoadset() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getLoadsetRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
- getLoadsetRef() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
- getLobeID() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Get a unique (within the AntMode) identifier for the Antenna lobe..
- getLobeName() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Get a name for the Antenna lobe.
- getLobeSymmetric() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Get In Data Item LobeSymmetric (US), indicate whether the sidelobe is
symmetric..
- getLobeValueAngleAccuracy() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Get the measurement accuracy of the LobeValueAngle(s) in degrees.
- getLobeValueAngleHorz() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Get the azimuth angle between the sidelobe LobeValueLevel and the mainbeam
maximum power level..
- getLobeValueAngleVert() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Get the vertical angle between the sidelobe LobeValueLevel and the mainbeam
maximum power level..
- getLobeValueID() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Get a unique (within the AntLobe) identifier for the Antenna lobe
measurement..
- getLobeValueLevel() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Get the ratio of the mainbeam power level to the sidelobe power level,
expressed as a positive value in dB..
- getLobeValueLevelAccuracy() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Get the measurement accuracy of the LobeValueLevel value in dB.
- getLobeValueName() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Get a name for the Antenna lobe measurement..
- getLocalEventID() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the local event ID..
- getLocation() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Get the LocationRef
- getLocation() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the unique reference serial of an existing Location dataset..
- getLocation() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntryLocation
-
Get the serial of the referenced Location.
- getLocation() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get the serial of the referenced Location..
- getLocation() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Get the unique reference serial of an existing Location dataset..
- getLocation() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Get the serial of the referenced Location..
- getLocation() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
Get the serial of the referenced Location..
- getLocation() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getLocationExcluded() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Get "Yes" to indicate that the LocSatRef is to be excluded from the
location set for the current station.
- getLocationRadius() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Get the radius associated with the Location to produce a circle.
- getLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
- getLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the serial of the referenced Location..
- getLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
- getLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
- getLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Get the unique reference of an existing Location dataset that describes the
target location.
- getLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
- getLocationRestriction() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Get .
- getLocationRestrictionRef() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Get the LocationRestriction
- getLocSat() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Get the serial of a Location or Satellite dataset.
- getLocSat() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.StageLocation
-
Get the serial of a Location or satellite..
- getLocSat() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Get a reference to a geographic location or satellite associated with this
diagram endpoint.
- getLocSatRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
- getLocSatRef() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.StageLocation
-
- getLocSatRef() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
- getLOFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Get the maximum value of the LO frequencies.
- getLOFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Get the nominal LO frequency or minimum value of the LO frequency range..
- getLon() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Get the geographical longitude (degrees, minutes, seconds, and hemisphere E
or W) of the Point or center of the Ellipse.
- getLon() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Get the geographical longitude (degrees, minutes, seconds, and hemisphere E
or W) of the Point or center of the Ellipse.
- getLon() - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Get the geographical longitude (degrees, minutes, seconds, and hemisphere E
or W) of the Point or center of the Ellipse.
- getLon() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Get the geographical longitude of the target location, including hemisphere
(H).
- getLonHemisphere(Number) - Method in class us.gov.dod.standard.ssrf._3_1.adapter.XmlAdapterLON
-
Get the longitude hemisphere from a latitude in decimal degrees.
- getLowestUsableChannel() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Get the center frequency of the lowest channel usable within this
transmitter frequency range..
- getMajorFunction() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Get the major (or primary) function of the frequency assignment..
- getManufacturer() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Get the Manufacturer
- getMaxActiveFrames() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Get the maximum number of active frames (data blocks currently in use
directing equipment functionality) for a specific loadset..
- getMaxBitRate() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Get the maximum bit rate in kilobits per second applicable to digital
communications systems.
- getMaxCls() - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Get the highest classification that can be used for the email address..
- getMaxCls() - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Get the highest classification that can be used on the network.
- getMaxDevRatio() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get the deviation ratio data applicable to frequency- or phase-modulation
equipment.
- getMaxGain() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the processing gain..
- getMaxInclusive() - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterNumber
-
Get the maximum (inclusive) value allowed by this adapter.
- getMaxLength() - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterString
-
Get the maximum string length.
- getMaxLength() - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterTString
-
Get the maximum string length.
- getMaxPower() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the maximum level of input power..
- getMaxReactiveFrames() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Get the maximum number of reactive frames (data blocks planned to direct
equipment functionality in response to a stimulus) for a specific loadset..
- getMaxValue() - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterInteger
-
Get the maximum value allowed by this adapter.
- getMaxValue() - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterTNumber
-
Deprecated.
Get the maximum value allowed by this adapter.
- getMessage() - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Get the serial of the Message Dataset that is causing this response..
- getMessage() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getMessageRef() - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
- getMinInclusive() - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterNumber
-
Get the minimum (inclusive) value allowed by this adapter.
- getMinLength() - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterString
-
Get the minimum string length.
- getMinLength() - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterTString
-
Get the minimum string length.
- getMinPointAngle() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Get the minimum vertical pointing angle for satellite ground station
antennas..
- getMinSeparation() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Get the minimum frequency separation required at one transmitter or
receiver location..
- getMinutes() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the minutes of an hour (0-59) when the Assignment will be guarded
(monitored) or used for transmission..
- getMinutes() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the minutes of an hour [0-59] that the Force element is planned for
deployment..
- getMinutes() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Get the minutes of an hour [0-59]..
- getMinutes() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the minutes of an hour [0-59]..
- getMinValue() - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterInteger
-
Get the minimum value allowed by this adapter.
- getMinValue() - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterTNumber
-
Deprecated.
Get the minimum value allowed by this adapter.
- getMissing() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Get the MissingRef
- getMissingRef() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
- getMission() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Get the task expected to be accomplished by the loadset..
- getMissionCode() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get the mission code representing the primary mission of the Force Element
(e.g.,Training, Finance, etc)..
- getModAllowedBy() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- getModAllowedByRole() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the serial of the Role which is authorized to modify the current
dataset.
- getModeID() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get a short name for the mode; this name should be a meaningful
identification of the mode, but it can also be automatically generated in
some systems.
- getModeID() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
Get the unique name of an AntMode of the Antenna specified in the
corresponding Serial field.
- getModeID() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxModeRef
-
Get the unique identifier of a TxMode of the transmitter in this
configuration.
- getModeID() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get a short name for the mode; this name should be a meaningful
identification of the mode, but it can also be automatically generated.
- getModeID() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the unique identifier of a TxMode of the transmitter in this
configuration.
- getModeName() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get .
- getModeName() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get a short name for the mode..
- getModeName() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get a short name for the mode..
- getModeUse() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get In Data Item ModeUse, indicate if the mode is used for transmit,
receive, or both transmit and receive..
- getModFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Get the maximum modulating frequency: - for a transmitter, measured on the
high side of the spectrum signature at the -3 dB point before the baseband
signal begins the up-conversion process; - for a receiver, frequency that
can be recovered and demodulated by the receiver.
- getModFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Get the minimum modulating frequency measured: - for a transmitter, on the
low side of the spectrum signature at the -3 dB point before the baseband
signal begins the up-conversion process; - for a receiver, at the -3 dB
point on the low frequency side of the receiver baseband, after detection
but prior to de-multiplexing or demodulation..
- getModulationType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the type of modulation..
- getMonths() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the month of year [1-12] when the Assignment will be guarded
(monitored) or used for transmission..
- getMonths() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the month of year [1-12] that the Force element is planned for
deployment..
- getMonths() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Get the month of year [1-12]..
- getMonths() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the month of year [1-12]..
- getMOPAdaptiveDriverDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get the condition which controls, or can be associated with, the signal MOP
variations..
- getMOPAdaptiveDriverRuleDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get the rule which describes the signal MOP variations..
- getMOPAMPercentModulation() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get the AM Percent Modulation is the ratio (expressed as a percentage)
between the amplitude variation and the maximum amplitude.
- getMOPChangeRateAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPChangeRateAM (US), enter the change in amplitude
within the pulse.
- getMOPChangeRateCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPChangeRateCW (US), enter the change in continuous
wave frequency within the pulse.
- getMOPChangeRateFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPChangeRateFM (US), enter the change in frequency
within the pulse.
- getMOPChangeRatePM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPChangeRatePM (US), enter the change in phase angle
within the pulse.
- getMOPContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPContinuous (US), indicate whether MOP or CW
modulation is Discrete or Continuous..
- getMOPDutyCycle() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Get In Data Item US:MOPDutyCycle (US), enter as a percentage, the minimum
or nominal ratio of the pulse duration to the pulse period..
- getMOPDutyCycle() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Get In Data Item US:MOPDutyCycle (US), enter as a percentage, the minimum
or nominal ratio of the pulse duration to the pulse period..
- getMOPDutyCycle() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Get In Data Item US:MOPDutyCycle (US), enter as a percentage, the minimum
or nominal ratio of the pulse duration to the pulse period..
- getMOPFlyBackInterval() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Get In Data Item US:MOPFlyBackInterval (US), enter the time duration
between the end of a continuous (linear) sweep and the beginning of the
next continuous (linear) sweep.
- getMOPID() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPID (US), enter a unique identifier (within the
TxMode) for the MOP data..
- getMOPMeanValueAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPMeanValueAM (US), enter the average amplitude for a
signal which changes on a non-patterned basis within a pulse.
- getMOPMeanValueCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPMeanValueCW (US), enter the average continuous wave
frequency for a signal which changes on a non-patterned basis within a
pulse.
- getMOPMeanValueFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPMeanValue (US), enter the average frequency for a
signal which changes on a non-patterned basis within a pulse.
- getMOPMeanValuePM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPMeanValue (US), enter the average phase angle for a
signal which changes on a non-patterned basis within a pulse.
- getMOPNumElements() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPNumElements (US), enter the number of discrete
FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any
repeated values are counted each time).
- getMOPNumElements() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Get In Data Item US:MOPNumElements (US), enter the number of discrete
FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any
repeated values are counted each time).
- getMOPNumElements() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Get In Data Item US:MOPNumElements (US), enter the number of discrete
FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any
repeated values are counted each time).
- getMOPNumElements() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Get In Data Item US:MOPNumElements (US), enter the number of discrete
FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any
repeated values are counted each time).
- getMOPOffTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPOffTime (US), enter the duration of the state of the
modulated waveform with the absence of energy..
- getMOPOnTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPOnTime (US), enter the duration of the one on-time
related to the binary form of amplitude modulation called on-off keying..
- getMOPPatternName() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item MOPPatternName (US), enter a freeform text name for the
pattern (e.g., Phase Alpha)..
- getMOPPatternPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPPatternPeriod (US), enter the duration of one
complete cycle of Frequency, Phase or Amplitude variations for a signal
which changes on a patterned basis, within a pulse, for pulsed signals..
- getMOPPatternType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPPatternType (US), indicate whether MOP or CW
characteristics are Patterned, Non-Patterned, Adaptive, or Unmodulated..
- getMOPPulseDurationLink() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPPulseDurationLink (US), enter the Discrete PD value
which is associated with the selected MOP name (i.e., the name in the MOP
Pattern List)..
- getMOPRepetionInterval() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Get the overall interval which may include multiple Sweep Repetition
Intervals (SRI).
- getMOPRepetionInterval() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Get the overall interval which may include multiple Sweep Repetition
Intervals (SRI).
- getMOPRepetionInterval() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Get the overall interval which may include multiple Sweep Repetition
Intervals (SRI).
- getMOPSequenceDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Get In Data Item US:MOPSequenceDesc (US), enter a text description of the
MOP sequence..
- getMOPStepAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Get In Data Item US:MOPStepAM (US), enter the difference between adjacent
amplitude discrete power values, within a pulse.
- getMOPStepAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Get In Data Item US:MOPStepAM (US), enter the difference between adjacent
amplitude discrete power values, within a pulse.
- getMOPStepAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Get In Data Item US:MOPStepAM (US), enter the difference between adjacent
amplitude discrete power values, within a pulse.
- getMOPStepCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Get In Data Item US:MOPStepCW(US), enter the difference between adjacent
continuous wave frequency discrete values, within a pulse.
- getMOPStepCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Get In Data Item US:MOPStepCW(US), enter the difference between adjacent
continuous wave frequency discrete values, within a pulse.
- getMOPStepCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Get In Data Item US:MOPStepCW(US), enter the difference between adjacent
continuous wave frequency discrete values, within a pulse.
- getMOPStepFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Get In Data Item US:MOPStepFM (US), enter the difference between adjacent
frequency discrete values, within a pulse.
- getMOPStepFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Get In Data Item US:MOPStepFM (US), enter the difference between adjacent
frequency discrete values, within a pulse.
- getMOPStepFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Get In Data Item US:MOPStepFM (US), enter the difference between adjacent
frequency discrete values, within a pulse.
- getMOPStepPM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Get In Data Item US:MOPStepPM (US), enter the difference between adjacent
phase discrete values, within a pulse.
- getMOPStepPM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Get In Data Item US:MOPStepPM (US), enter the difference between adjacent
phase discrete values, within a pulse.
- getMOPStepPM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Get In Data Item US:MOPStepPM (US), enter the difference between adjacent
phase discrete values, within a pulse.
- getMOPSweepPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Get In Data Item US:MOPSweepPeriod (US), enter the time duration from a
point in the RF sequence (or continuous variation) to the like point in the
next repeating RF sequence (or continuous variation)..
- getMOPTimeBWProduct() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPTimeBWProduct (US), enter the time-bandwidth product
of the waveform (actual PD times instantaneous bandwidth)..
- getMOPType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item MOPType (US), indicate if the information imprinted on the
pulse is modulated by amplitude (AM), frequency (FM), phase (PM), or is a
continuous wave (CW)..
- getMOPValueAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Get In Data Item US:MOPValueAM (US), enter specific data that describes the
Amplitude (AM) features of a signal impressed on a Pulse.
- getMOPValueCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Get In Data Item US:MOPValueCW (US), enter specific data that describes the
Continuous Wave (CW) features of a signal impressed on a Pulse.
- getMOPValueFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Get In Data Item US:MOPValueFM (US), enter specific data that describes the
Frequency (FM) features of a signal impressed on a Pulse.
- getMOPValueMaxAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPValueMaxAM (US), enter the maximum change in
amplitude within the pulse.
- getMOPValueMaxCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPValueMaxCW (US), enter the maximum change in
continuous wave frequency within the pulse.
- getMOPValueMaxFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPValueMaxFM (US), enter the maximum change in
frequency within the pulse.
- getMOPValueMaxPM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPValueMaxPM (US), enter the maximum change in phase
angle within the pulse.
- getMOPValueMinAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPValueMinAM (US), enter the minimum change in
amplitude within the pulse.
- getMOPValueMinCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPValueMinCW (US), enter the minimum change in
continuous wave frequency within the pulse.
- getMOPValueMinFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPValueMinFM (US), enter the minimum change in
frequency within the pulse.
- getMOPValueMinPM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item US:MOPValueMinPM (US), enter the minimum change in phase
angle within the pulse.
- getMOPValuePM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Get In Data Item US:MOPValuePM (US), enter specific data that describes the
Phase (PM)features of a signal impressed on a Pulse.
- getMotionType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the general category for the movement of a scanning or tracking
antenna..
- getMUXLevel() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get In Data Item US:MUXLevel (US), enter the signal power in dB referenced
to the baseband carrier for the companding of the multiplexed signal..
- getMUXScheme() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get In Data Item US:MUXScheme (US), enter a freetext description of the
multiplexing algorithm..
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Project
-
Get the name of the project..
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Manufacturer
-
Get the name of the company that manufactured the equipment..
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Get the standard military nomenclature.
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Get the name of this channel (e.g., "Video carrier, Sound carrier, Nicam
Sound carrier")..
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.ChannelPlan
-
Get the name of this channel plan (e.g., "Plan for Wireless Microphones in
the Band 162-174 MHz")..
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Get the name of the loadset..
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Get the identifying term for the timing deconfliction protocol.
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get the name of the location..
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Get a human-readable name for the message..
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Get the externally-assigned name of the note..
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Get an alternate name or nickname for the organisation..
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Get In Data Item Name (US), enter a descriptive name for the Radiation
Plan..
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get In Data Item Name (US), enter a unique name (within the parent
RadiationPlan) for the Jamming Plan..
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Get the name or function of the Role.
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
Get the name of an associated earth station..
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Get a human-readable name of a diagram endpoint, or Station..
- getName() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Get the name of the tone.
- getNarrowBandPlanning() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Get the US:NarrowBandPlanning
- getNATOPooledFrequencyCode() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the Type Special Assignment for the frequency assignment..
- getNATOPooledFrequencyNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the a Frequency Management Sub-committee (FMSC) assigned code number
identifying the type and nationality of a frequency pool..
- getNavAidsChannel() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Get In Data Item NavAidsChannel, for TACAN and DME assignments, enter the
channel number of the allocated pair of radio frequencies assigned for use
by Air / Ground / Air radionavigation facilities such as: TACAN, VORTAC,
DME, MLS/DME, etc ...
- getNBFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.NarrowBandPlanning
-
Get the transition frequency to comply with narrow band transition plans..
- getNecessaryBw() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Emission
-
Get the necessary bandwidth which is defined as the value in MHz, for a
given class of emission, the width of the frequency band which is just
sufficient to ensure the transmission of information at the rate and with
the quality required under specified conditions.
- getNecessaryBw() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the necessary bandwidth which is defined as the minimum width of the
frequency band sufficient to ensure the transmission of information at the
required rate and quality.
- getNecessaryBw() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the necessary bandwidth which is defined as the minimum width of the
frequency band sufficient to ensure the transmission of information at the
required rate and quality.
- getNecessaryBwMax() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigEmission
-
Get the maximum necessary bandwidth in the case of a range of values.
- getNecessaryBwMin() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigEmission
-
Get the necessary bandwidth which is defined as the value in MHz, for a
given class of emission, the width of the frequency band which is just
sufficient to ensure the transmission of information at the rate and with
the quality required under specified conditions.
- getNetCircuitsAffected() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the network circuits affected by the interference..
- getNetNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Get the net number in the format PXXXnn where 'P' is either A for HAVE
QUICK II or B for SATURN, XXX is in the range 000 through 999, and nn is
one of the following four modes: 00 - sub-band hopping mode (only for
SATURN), 25 - full-band hopping mode (HAVE QUICK II and SATURN), 50 -
SATURN mode, and 75 - SATURN mode.
- getNetsAffected() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the networks affected by the interference..
- getNetworkName() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the name of the network to which the satellite belongs..
- getNoiseFigure() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the ratio of the output noise power to the portion of noise power
attributable to thermal noise in the input termination at 290 Kelvins.
- getNoiseTemp() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the absolute temperature of a passive system having an available noise
power per unit bandwidth at a specified frequency equal to that of the
actual terminals of a network.
- getNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the Nomenclature
- getNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get the Nomenclature
- getNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Get the Nomenclature
- getNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Get the Nomenclature
- getNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the Nomenclature
- getNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the Nomenclature
- getNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get the Nomenclature
- getNonGeoApogee() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the maximum altitude of the non-geostationary satellite relative to
Mean Sea Level (MSL)..
- getNonGeoInclination() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the angle determined by the plane containing the orbit of the
non-geostationary satellite and the equatorial plane of the earth..
- getNonGeoNumSatellites() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the number of non-geostationary satellites in a system having similar
orbital characteristics..
- getNonGeoPerigee() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the minimum altitude of the non-geostationary satellite relative to
Mean Sea Level (MSL)..
- getNonGeoPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the time required for the non-geostationary satellite to make one
complete orbit around the earth..
- getNotation() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the Notation
- getNotationTimeline() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Get the US:NotationTimeline
- getNote() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.RecordNote
-
Get a reference to the Note dataset that describes the note identified in
NoteCode..
- getNote() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getNoteRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.RecordNote
-
- getNSEPUse() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get the U.S.
- getNTIACoordinationRequired() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get if this application requires coordination with the National Authority
for approval.
- getNTIASpaceData() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the Space and terrestrial information as defined by section 10.8 of the
NTIA Manual and not captured in other more specific data fields..
- getNum() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the quantity of Force Element referenced in FERef..
- getNumAreaUnits() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get the maximum number of units (equipment) that will be operating
simultaneously in the same area of operation.
- getNumAreaUnits() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the maximum number of units (equipment) that will be operating
simultaneously in the same area of operation.
- getNumBeamPositionsPerScan() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the number of beam positions (aka., dwells) per scan cycle.
- getNumBeamPositionsTotal() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the total number of unique array beam positions resulting from the
frequency steps of a frequency scanning, phase changes, in phase scanning,
or discrete time delays in time delay steering..
- getNumBeamsPerRaster() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the number of beam positions necessary to complete one bar of the
raster scan..
- getNumber() - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Get the area code, telephone/telefax number (including the extension if
necessary) of individual or contact organisation..
- getNumCositedUnits() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get the maximum number of units (equipment) that will be operating
simultaneously in the same cosite environment.
- getNumCositedUnits() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the maximum number of units (equipment) that will be operating
simultaneously in the same cosite environment.
- getNumEquip() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Get the total number of units to be built, procured or used during this
stage..
- getNumFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Get the number of frequencies required..
- getNumFreqs() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get the number of discrete frequencies or frequency ranges associated with
this Jamming Plan.
- getNumFreqsPerHopset() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the number of frequencies contained in a hop set..
- getNumFreqsRequired() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get the total number of frequencies required..
- getNumHopsets() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the number of frequency hopsets employed when a system uses frequency
hopping spread spectrum modulation techniques, including hybrid direct
sequence and frequency hopping..
- getNumMobileUnits() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get the number of mobile units (equipment).
- getNumMobileUnits() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the number of mobile units.
- getNumObsPositions() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the number of discrete ERP dwell/pulse groups, for a pulsed signal, or
ERP values at a constant ERP value, for a continuous wave (CW) signal,
observed in a signal which contains multiple and discrete ERP values that
change in a repeating ERP sequence..
- getNumObsValues() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the number of discrete ERP values observed for a signal which contains
multiple and discrete ERP values..
- getNumPDPositions() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the number of pulses (i.e., positions) in a repeating sequence of
pulses which has multiple (2 or more) PD values..
- getNumPDValues() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the number of discrete PD values (i.e., elements) in a repeating
sequence of pulses which has multiple (2 or more) PD values..
- getNumPresetChannels() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Get the number of preset channels available..
- getNumPresetChannels() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Get the number of preset channels available..
- getNumPRIElements() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the number of discrete PRI values in a repeating sequence of discrete
PRIs..
- getNumPRIPositions() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the number of time intervals between pulses or pulse groups, or the
number of PRI dwell groups, in a repeating PRI sequence which uses discrete
PRI values..
- getNumRastersPerCycle() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the number of 360 degree scans (aka, turns) a component of a scan makes
in the time it takes the Primary Scan to complete one complete cycle/scan..
- getNumRepeaters() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get the total number of repeaters in the trunked land mobile system..
- getNumRFChannels() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the number of channels into which the RF range of the emitter is
divided..
- getNumRFElements() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the number of discrete RFs (channels) a multiple RF signal contains..
- getNumRFPositions() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the number of RF values in a signal RF sequence before it repeats..
- getNumRFSimultaneous() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get The number of frequencies simultaneously used by the emitter..
- getNumScanPositions() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the number of discrete values observed in a single repeating scan
period sequence..
- getNumScanValues() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the number of discrete values observed in multiple repeating scan
period sequences..
- getNumSideTones() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the number of side tone frequencies for the sidetones modulating the
carrier individually..
- getNumStates() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Get the total number of states, e.g., 4 for 4-ary Phase Shift-Keying, 64
for 64 level Quadrature AM..
- getNumStations() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.SysOfStation
-
Get the total number of stations associated with the Assignment.
- getNumSubCarriers() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the number of subcarrier frequencies for the subcarriers modulating the
carrier individually..
- getNumSubpulses() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get the total number of subpulses (chips) contained in a radar coded pulse.
- getNumSystems() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the total number of systems that are expected to use this Assignment..
- getNumTiltAngleElements() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the number of unique discrete tilt angle values..
- getNumTiltAnglePositions() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the number of discrete Polarisation Tilt Angles used in a repeating
Polarisation Tilt Angle sequence..
- getNumUsers() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the number of users supported by the configuration.
- getNumUsers() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get the total number of users of the trunked land mobile system..
- getObjectNum() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the USSPACECOM-assigned space object identification number..
- getObservedERPAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the US:ObservedERPAnalysis
- getObservedERPValues() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get the US:ObservedERPValues
- getObservedFirstDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the date and time, based on Greenwich Mean Time (GMT), the subject
signal was first collected..
- getObservedFirstDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the date and time, based on Greenwich Mean Time (GMT), the subject
signal was first collected.
- getObservedLastDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the date and time, based on Greenwich Mean Time (GMT), the subject
signal was last collected..
- getObservedLastDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the date and time, based on Greenwich Mean Time (GMT), the subject
signal was last collected.
- getObservedLobeAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the US:ObservedLobeAnalysis
- getObservedLobeValues() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Get the US:ObservedLobeValues
- getObservedMOPAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the US:ObservedMOPAnalysis
- getObservedMOPBits() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Get .
- getObservedMOPSequence() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Get the US:ObservedMOPSequence
- getObservedMOPSweep() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get the US:ObservedMOPSweep
- getObservedMOPValues() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Get .
- getObservedPDValue() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Get the observed PD data believed to be valid..
- getObservedPolarisationAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the US:ObservedPolarisationAnalysis
- getObservedPolarisationValues() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the US:ObservedPolarisationValues
- getObservedPRFValue() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Get the observed PRF data believed to be valid..
- getObservedPRIValue() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Get the observed PRI data believed to be valid..
- getObservedPulseAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the US:ObservedPulseAnalysis
- getObservedPulseValues() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the US:ObservedPulseValues
- getObservedRFAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the US:ObservedRFAnalysis
- getObservedRFValues() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the US:ObservedRFValues
- getObservedScanAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the US:ObservedScanAnalysis
- getObservedScanValues() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the US:ObservedScanValues
- getObserveTime() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the time interval for the recording of received signals, in (0-999)
hours, (0-59) minutes, and (0-999,999,999) nanoseconds (hhh.mm.sssssssss).
- getOccBw() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the minimum bandwidth utilized to process 99.5% of the emission
spectra..
- getOccBwCalculated() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement..
- getOffset() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.CurvePoint
-
Get a frequency difference (refer to data element Curve for use
instructions).
- getOffsetFreq() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the frequency offset relative to the center frequency of the channel..
- getOffTheShelfEquipment() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the US:OffTheShelfEquipment
- getOOBJustification() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the justification for out-of-band frequency use..
- getOOKPattern() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Get a text description of the on-off keying (OOK) pattern.
- getOperationalRFBW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the delta (aka.
- getOperInvIntent() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get if the system is intended for the DoD operational inventory..
- getOrbitType() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the type of orbit..
- getOrg() - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Get the publishing organization of the source document..
- getOrganisation() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Get the name of the Organisation that published the Reference, if it cannot
be covered by a OrganisationRef.
- getOrganisation() - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
Get the unique reference of the Organisation associated with the current
Organisation..
- getOrganisation() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getOrigin() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Get the country or organisation which is using the modified or new code..
- getOriginalAssignmentDate() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the date the frequency assignment was originally authorized..
- getOriginatingAgency() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the agency that originated the application..
- getOscillatorTuning() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Get the relationship between the local oscillator frequency and the RF
centre frequency..
- getOtherHarmonicLevel() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the greatest out-of-band emission level at harmonic frequencies greater
than three times the fundamental frequency.
- getOutputDevice() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get the name of the output device.
- getOutputDeviceType() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get the type of the device.
- getOwner() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- getOwnerOrg() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
Get the serial of the owning, or originating, organisation.
- getOwnerOrgRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
- getOwnerRole() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the serial of the Role which is responsible for the accuracy of the
data content.
- getOwnerType() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
Get the relationship of an individual or organization to the frequency
assignment..
- getOwningCountry() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get the owning country or body of the ForceElement..
- getOwningOrganisation() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get .
- getOwningOrganisationRef() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get a reference to the organisation that owns the ForceElement..
- getPairedASN() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Get the agency serial number of the assignment that is paired with this
Assignment in a repeater, duplex link or frequency diversity capability..
- getPairedFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Get the nominal frequency or minimum value of the frequency range, for the
paired frequency or frequency range when the allotment is for a duplex
system..
- getPairedFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Get the nominal frequency or minimum value of the frequency range, for the
paired frequency or frequency range when the allotment is for a duplex
system..
- getPairedType() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Get if the paired frequency is a transmitting repeater frequency, a
receiving repeater frequency, a duplex pairing, frequency diversity or
space diversity..
- getPDAdaptiveRuleDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the rule which describes the signal PD variations (aka.
- getPDContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get In Data Item PDContinuous (US), indicate whether pulse-to-pulse PD
variations are Discrete or Continuous.
- getPDDwellMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the maximum time duration for a complete dwell/group of pulses which
all have the same PD value.
- getPDDwellMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the minimum time duration for a complete dwell/group of pulses which
all have the same PD value..
- getPDExtremeMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the maximum PD value that represents 100% of observed values.
- getPDExtremeMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the minimum PD value that represents 100% of observed values..
- getPDMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the highest discrete PD value in a repeating sequence of pulses which
has multiple PD values
- getPDMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get for equipment having a capability for continuously variable PD over a
wide range.
- getPDMean() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the average PD of a signal which changes PD values on a non-patterned
basis..
- getPDMedian() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the PD value that the signal most often used, based on a statistical
study..
- getPDMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the delta lowest discrete PD value in a repeating sequence of pulses
which has multiple PD values.
- getPDMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get a numeric value indicating the characteristic pulse duration of the
equipment at the half-power (-3 dB) points.
- getPDPatternPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the time duration for one complete cycle of a repeating sequence of
pulses which has multiple (2 or more) PD values; the time duration shall go
from a point in one cycle to a like point in the next cycle..
- getPDPatternType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get In Data Item PDPatternType (US), Indicate whether PD is unmodulated or
pulse-to-pulse PD variations are Patterned, Non-Patterned, or Adaptive..
- getPDSequenceDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get a freetext description of the PD Sequence..
- getPDStdDev() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the standard deviation of the data sample used to calculate PD Mean..
- getPDStep() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the Step between adjacent PD values; pertains to discrete PD
variations..
- getPDTypicalMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the upper end of the range of PD values that represents 95% of observed
values, from a statistical study.
- getPDTypicalMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the lower end of the range of PD values that represents 95% of observed
values, from a statistical study.
- getPerformanceEffects() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the effect the interference has on normal operations..
- getPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the general period on a daily basis when the frequency assignment
frequencies will be either guarded (monitored) or used for transmission..
- getPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Get the enter the elapsed time between On and Off Triggers (i.e.,
Operations)..
- getPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Get In Data Item Period (US),- enter how often the frequency is being
monitored or jammed..
- getPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Time
-
Get the period of usage..
- getPhArrayNumElements() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the number of antenna elements in the phased array antenna..
- getPhArrayNumMainBeams() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the number of main beams in the phased array antenna..
- getPhysicalUsage() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Get In Data Item PhysicalUsage (US), indicate the type of vehicle or other
entity that uses the equipment, or from which the subject signal emanates..
- getPlatform() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get the type of platform..
- getPoc() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
Get the dataset identifier of the Contact, Organisation, or Role..
- getPoc() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Get the reference to a Contact, Organisation, or Role responsible for this
status log entry or the recipient of the action..
- getPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Get the POCInformation
- getPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the POCInformation
- getPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the POCInformation
- getPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get the POCInformation
- getPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get the POCInformation
- getPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the POCInformation
- getPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the POCInformation
- getPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get the POCInformation
- getPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Get the POCInformation
- getPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Get the POCInformation
- getPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the POCInformation
- getPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get the POCInformation
- getPOCRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Get the reference to a Contact, Organisation, or Role responsible for this
status log entry or the recipient of the action..
- getPoint() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get the antenna feed point height above the terrain, in metres.
- getPointingAzMax() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get the maximum antenna azimuth angle.
- getPointingAzMin() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get the starting azimuth if an azimuth range is reported; otherwise, enter
a single azimuth.
- getPointingElevMax() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get the maximum antenna elevation angle.
- getPointingElevMin() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get the minimum antenna elevation angle.
- getPointToMultiPoint() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Get "Yes" if the diagram endpoint participates in point-to-multipoint
links.
- getPolarisationAngle() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the angle of the electric field vector measured counter-clockwise from
the equatorial plane as referenced from the boresight or typical static
positioning of the antenna..
- getPolarisationDirection() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the direction in which the polarisation ellipse is mechanically
rotating.
- getPolarisationRotationRate() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the number of times per second that the polarisation ellipse
mechanically rotates through the same major axis tilt angle..
- getPolarisationSense() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the rotation direction of the radiated electromagnetic wave electric
field (E-field) vector (E) relative to the direction of propagation.
- getPolarisationType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the principal orientation of the electric field of the electromagnetic
wave for an antenna..
- getPolarisationType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the polarisation of the radio wave referenced to the direction of
propagation..
- getPolarisationType() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Get the antenna polarisation planned for the desired jamming instance..
- getPolygon() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get the Polygon
- getPolygonPoint() - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Get the PolygonPoint
- getPortIsolation() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the power ratio between the signal injected into one port and the power
returned by the other port ..
- getPostCode() - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Get the zip code or postal code portion of the address..
- getPostCode() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get the zip code or postal code portion of the address..
- getPostDetectionFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the maximum post detection frequency at the baseband half-power point.
- getPostDetectionFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the maximum post detection frequency at the baseband half-power point..
- getPotentialVictims() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Get the US:PotentialVictims
- getPower() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Emission
-
Get the maximum authorised power in dBW, for the given class of emission..
- getPower() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Get the desired power value planned to be directed at the target..
- getPower() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the power limit of this transmitter mode when in this configuration..
- getPowerLimit() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the power limit of the transmissions in this configuration..
- getPowerLimit() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxModeRef
-
Get the power limit of this transmitter mode when in this configuration..
- getPowerMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Get the maximum transmitter power.
- getPowerMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Get the nominal transmitter power, or the minimum power in case of a range
of values..
- getPowerType() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the power type code for carrier, mean, or peak envelope power emitted.
- getPowerType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Get the power type code for carrier, mean, or peak envelope power emitted.
- getPreferred() - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Get a code "Yes" for the preferred address(es) and a code "No" for the
others.
- getPreferred() - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Get a code "Yes" for the preferred number(s) and a code "No" for the
others..
- getPreselectionType() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Get the type of preselection used in the receiver frontend..
- getPreviousAuthorization() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the US:PreviousAuthorization
- getPreviousSPSDocketNum() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get the IRAC Spectrum Planning Subcommittee (SPS) docket number of the NTIA
Certification of Spectrum Support for the existing trunked system..
- getPRFChangeRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the rate of change for PD variations expressed as PD change per unit of
time..
- getPRFExtremeMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the minimum Observed PRF in the signal sample.
- getPRFExtremeMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the minimum Observed PRF in the signal sample..
- getPRFMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the highest discrete PRI value (convert PRI to PRF) which are found in
a single intercept that contains the complete PRI characteristics for that
specific data set.
- getPRFMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the lowest discrete PRI value (convert PRI to PRF) which are found in a
single intercept that contains the complete PRI characteristics for that
specific data set.
- getPRFTypicalMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the upper end of the range of PRF values that represents 95% of
observed values, from a statistical study.
- getPRFTypicalMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the lower end of the range of PRF values that represents 95% of
observed values, from a statistical study.
- getPRIAdaptiveDriverDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the condition which controls or can be associated with the signal PRI
variations (aka, interpulse modulation changes)..
- getPRIAdaptiveRuleDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the rule which describes the signal PRI variations (aka, interpulse
modulation changes).
- getPRIAnomalousValues() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get any regularly occurring signal values which do not fit in any of the
other PRI related fields.
- getPRIBasicClockPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the fundamental period of the emitter clock which is used to generate
the subject signal PRIs.
- getPRIChangeRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the PRI change per unit of time, measured over a significant portion of
the waveform.
- getPRIContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get In Data Item PRIContinuous (US), Indicate whether pulse-to-pulse PRI
variations are Discrete or Continuous.
- getPRICountdown() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the integer (aka, count or countdown) associated with the PRI Crystal
value to provide the Pattern Period..
- getPRICountdownKey() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the integer (aka, count or countdown) used to generate the PRI from the
PRI Crystal value..
- getPRIExtremeMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the maximum observed PRI value, from a statistical study of a 100% data
set.
- getPRIExtremeMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the minimum observed PRI value, from a statistical study of a 100% data
set..
- getPRIFramePeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the time difference between a point on the leading edge of the frame
marker (or an alternate pulse in the frame), to the similar point on the
leading edge of the frame marker (or the alternate pulse) in the
next/consecutive frame..
- getPRIFrameRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the rate of frame generation during the Pulse Repetition Interval.
- getPRIGroupPulseSpacing() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the time difference between a point on the leading edge of the subframe
marker (or an alternate pulse in the subframe), to the similar point on the
leading edge of the subframe marker (or the alternate pulse in the
subframe) in the next/consecutive frame..
- getPRIGroupSpacing() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the PRI between two groups of pulses which both have constant but
different PRIs (aka, the PRI between consecutive PRI dwell groups)..
- getPrimaryFirmware() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Get the mission-independent software that is "burned" and which stays
resident on the RF jamming hardware..
- getPrimaryStation() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get .
- getPrimaryStation() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get whether this station is the station of primary regulatory interest..
- getPRIMean() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the average PRI value for a signal which changes PRI values on a
non-patterned basis..
- getPRIMedian() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the observed PRI value that the signal most often used based on
statistical study of a data set..
- getPRIMedianCountdowns() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the observed PRI Crystal Counts used to generate the PRIs used most
often by the signal, based on statistical study of a data set..
- getPriority() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Get a number from 0 to 9 that is used to influence the positioning of the
Assignment in the ordering of the assignment process, where 9 represents
the highest priority and 0 is the lowest priority..
- getPriority() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the assigned priority code consisting of a letter followed by a number
in the range A1 through Z9, with A1 being the highest priority (all Taboo
nets should be assigned an A1 priority code).
- getPriority() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Get if this spectrum use is Primary, Secondary or Permitted, as defined by
the system use and the appropriate Administration Frequency Allocation
Table/guidance..
- getPriority() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get the relative priority of the service request..
- getPriority() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Get if this service is a primary or secondary use of this band.
- getPriority() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Get if this service is a primary or secondary use of this band.
- getPRIPatternPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the time duration for one complete cycle of a repeating PRI sequence..
- getPRIPatternType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get whether the PRI is unmodulated or pulse-to-pulse PRI variations are
Patterned, Non-Patterned, or Adaptive..
- getPRIPulsesPerGroup() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the number of pulses in a pulse group..
- getPRISequenceDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get a free text description of the PRI Sequence..
- getPRIStability() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the variation of a mean PRI value measured from one time to another
time.
- getPRIStabilitySamplePeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the time interval used to determine the PRI stability value..
- getPRIStdDev() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the standard deviation associated with the data set used to calculate
the values entered in the PRI Mean fields.
- getPRIStep() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the delta between the Most Probable observed PRI values of adjacent and
discrete PRI..
- getPRISubframePeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the time difference between a point on the leading edge of the subframe
marker (or an alternate pulse in the subframe), to the similar point on the
leading edge of the subframe marker (or the alternate pulse in the
subframe) in the next/consecutive frame..
- getPRISubframeRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the number of subframes detected during each PRI Subframe period..
- getPRITimingShift() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the PRI timing shift value, on Emitters with repeated timing shifts of
a predictable magnitude, but not predictable timing..
- getPRITypicalMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the upper end of the range of PRI values that represent 95% of the
signal observed PRI values, from a statistical study of a data set.
- getPRITypicalMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the lower end of the range of PRI values that represent 95% of the
signal observed PRI values, from a statistical study of a data set..
- getProcessing() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get if the frequency assignment is to be approved at the national or
international level..
- getProcessingGainMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the maximum ratio of the post processing signal-to-noise ratio to the
received signal-to-noise ratio.
- getProcessingGainMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the minimum ratio of the post processing signal-to-noise ratio to the
received signal-to-noise ratio..
- getProject() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Get the Project
- getProject() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the Project
- getProject() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the Project
- getProject() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the Project
- getProject() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the Project
- getProperName() - Method in enum us.gov.dod.standard.ssrf._3_1.metadata.lists.ListCAO
-
- getProperty(String) - Method in class us.gov.dod.standard.ssrf.SSRF
-
Searches for the property with the specified key in this property list.
- getProperty(Class<?>, Field) - Method in class us.gov.dod.standard.ssrf.SSRFProperties
-
Searches for the property with the specified key in this property list.
- getProperty(String, String) - Method in class us.gov.dod.standard.ssrf.SSRFProperties
-
Searches for the property with the specified key in this property list.
- getProperty(String, String, String) - Method in class us.gov.dod.standard.ssrf.SSRFProperties
-
Searches for the property with the specified key in this property list.
- getProtectionCode() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get In Data Item ProtectionCode, indicate the type of JRFL entry..
- getPRRMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get for equipment having a capability for continuously variable PRR over a
wide range.
- getPRRMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get the numeric value for the pulse repetition rate (PRR) of the equipment.
- getPulse() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the number of pulses in a single pulse burst..
- getPulseChirpDurationMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the maximum duration (pulsewidth) of the chirp signal.
- getPulseChirpDurationMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the duration (pulsewidth) of the chirp signal..
- getPulseChirpFreqShift() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the difference between the starting and stopping frequency of a chirped
pulse signal..
- getPulseChirpRate() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get for linear frequency modulation, the constant rate at which the radio
frequency of a pulse is increased throughout the width of the pulse..
- getPulseFreqDev() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get In Data Item PulseFreqDev, Enter, for FM pulse radars, the total
frequency shift during the pulse width..
- getPulseWidth() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Get the collected EW channel dwell for the Chirped Signal..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Get an application-specific measure of the quality for the assigned
frequency.
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getQuality() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Get one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- getRadarProcessingGainMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get the maximum ratio of the post-processing signal-to-noise ratio to the
received signal-to-noise ratio.
- getRadarType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the type of radar..
- getRadiationPlan() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getRadioService() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
Get the Radiocommunication Service associated with the frequency usage in
this configuration.
- getRanking() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Get the ranking level of the timing deconfliction protocol..
- getRatio() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.VSWR
-
Get the standing wave ratio referenced to the specific frequency, as a
number without unit (e.g., enter "2" to represent a ratio of 2:1)..
- getReason() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Get the reason linked to the Action performed on this dataset..
- getReceiver() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Get the identifier of the related Receiver used in this configuration.
- getReceiver() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Get a value that is most probably correct..
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Get a value that is most probably correct..
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Get a value that is most probably correct..
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Get a value that is most probably correct..
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Get a value that is most probably correct..
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Get a value that is most probably correct..
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get a value that is most probably correct.
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Get a value that is most probably correct.
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Get a value that is most probably correct..
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Get a value that is most probably correct..
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Get a value that is most probably correct..
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Get a value that is most probably correct..
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Get a value that is most probably correct..
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Get a value that is most probably correct..
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Get a value that is most probably correct..
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Get a value that is most probably correct..
- getRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Get a value that is most probably correct..
- getRecordNote() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the US:RecordNote
- getRedacted() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get In Data Item Redacted (US), indicate if any original, or authoritative,
data was omitted.
- getReferencedStage() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Get the spectrum certification stage associated with this information..
- getRefFreq() - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Get .
- getRelated() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the RelatedRef
- getRelatedAnalysisAndTestData() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get In Data Item RelatedAnalysisAndTestData (US), describe electromagnetic
compatibility studies, testing or analyses relevant to this system,
including documents currently in progress.
- getRelatedOrganisation() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Get the RelatedOrganisation
- getRelatedRef() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
- getRelatedSupportability() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the RelatedSupportability
- getRelatedSystem() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Get the RelatedSystem
- getRelation() - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
Get the relationship between the two organisations..
- getRelation() - Method in class us.gov.dod.standard.ssrf._3_1.rfsystem.RelatedSystem
-
Get the relationship between the two systems..
- getReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get a list of country codes for which the current data item is releasable.
- getRelinquishmentDate() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Get the expected date the existing assignment will be relinquished by the
trunked land mobile system..
- getRemarkRef() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get remarks - Links to Data Item Remarks (Optional)
- getRemarkRef() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Get a list of Common/Remarks idx values applicable to the current data
item.
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Get the Any additional data to be submitted by the applicant that cannot be
accommodated in any of the other data items in the Government Master File
(GMF)..
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Get a list of Common/Remarks idx values applicable to the current data
item..
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Get a list of Common/Remarks idx values applicable to the current data
item..
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Get a list of Common/Remarks idx values applicable to the current data
item..
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Get a list of Common/Remarks idx values applicable to the current data
item..
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Get a list of Common/Remarks idx values applicable to the current data
item..
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get a list of Common/Remarks idx values applicable to the current data
item.
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Get a list of Common/Remarks idx values applicable to the current data
item..
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Get a list of Common/Remarks idx values applicable to the current data
item..
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Get a list of Common/Remarks idx values applicable to the current data
item..
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Get a list of Common/Remarks idx values applicable to the current data
item..
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Get a list of Common/Remarks idx values applicable to the current data
item..
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Get a list of Common/Remarks idx values applicable to the current data
item..
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Get a list of Common/Remarks idx values applicable to the current data
item..
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Get a list of Common/Remarks idx values applicable to the current data
item..
- getRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Get a list of Common/Remarks idx values applicable to the current data
item..
- getRepeat() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Get In Data Item Repeat (US), indicate if the attached file should be
repeatedly viewed / listened to..
- getRepeater() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get "Yes" for each receiver location when a station in the fixed or mobile
service is used primarily as a repeater..
- getReplacementInfo() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the name of the systems that are likely to be replaced by this system..
- getReplyingAuthority() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the name of the organization providing the reply..
- getReplyingCountry() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the code of the country providing the reply..
- getRequestedFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Get the RequestedFreq
- getRequestForExpansion() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get if this application is a request for expansion..
- getRequestType() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the request type.
- getRequired() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Get if a common timing deconfliction protocol is required for processing
the subject signal.
- getRequiredEffect() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get the desired effect of this service request..
- getRequiredPerformance() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get the desired effectiveness of the service request.
- getRequirement() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Get any amplifying information on the requirement..
- getRequirement() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get any amplifying information about the requirement.
- getRequirement() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get a description of the types and forms of information to be transmitted
or received.
- getResetProcedure() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Get the instructions for zeroing/sanitizing the jamming equipment to
initial operating conditions..
- getResourceLocator() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Get either the file name (including the extension) of the reference
document when it is attached to the dataset, or an URL (Uniform Resource
Locator) to find the document..
- getRetireDate() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Get the date this Dataset goes out of force..
- getReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Get the date by which the dataset is to be reviewed.
- getReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the date by which the dataset is to be reviewed.
- getReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Get the date by which the dataset is to be reviewed.
- getReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get the date by which the dataset is to be reviewed.
- getReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Get a description of the justification of why the JRFL entry is required,
to support the spectrum manager..
- getReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get the date by which the dataset is to be reviewed.
- getReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Get the date by which the dataset is to be reviewed.
- getReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Get the date by which the dataset is to be reviewed.
- getReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the date by which the dataset is to be reviewed.
- getReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the date by which the dataset is to be reviewed.
- getRFAdaptiveDriver() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the condition controlling the choice of RF for Adaptive RF variations
(e.g., least jammed frequency).
- getRFAdaptiveRule() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get In Data Item RFAdaptiveRule (US), indicate how the RF is chosen for
Adaptive RF variations..
- getRFBasicClockPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the frequency divisor common to all RF separations (not necessarily to
all RF) RF crystal is not always the same as the RF channelization (min)..
- getRFChangeRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the RF change per unit of time, measured over a significant portion of
the waveform.
- getRFChannelFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the maximum RF channel values.
- getRFChannelFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the minimum RF channel values..
- getRFCoherent() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get In Data Item RFCoherent (US), indicate if the observed RF signal is
coherent, non-coherent, or unknown..
- getRFContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get whether pulse-to-pulse RF variations are Discrete or Continuous.
- getRFFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the typical highest RF value observed on a single intercept.
- getRFFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the typical lowest RF value observed on a single intercept..
- getRFFreqTolerance() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the drift in Hz or in ppm using the formula: Frequency tolerance (ppm)
= Maximum drift (Hz) / Center frequency (MHz).
- getRFFreqToleranceInterval() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get In Data Item:RFFreqToleranceInterval (US), enter the time interval over
which the RF stability measurements were taken..
- getRFFreqToleranceUnit() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the units in which the Frequency Tolerance is expressed..
- getRFMean() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the average RF of a signal which changes RFs on a non-patterned basis..
- getRFMedian() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the most probable RF values..
- getRFPatternPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the duration of one cycle of the pattern for patterned RF variations..
- getRFPatternType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get In Data Item RFPatternType (US), Indicate whether RF is unmodulated or
pulse-to-pulse RF variations are Patterned, Non-Patterned, or Adaptive..
- getRFRestFreq() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the observed carrier or rest frequency when the modulation is off.
- getRFSequenceDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get a free text description of the RF Sequence..
- getRFSlotDuration() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the duration of a single time slot for the hop dwell.
- getRFStandardDeviation() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the standard deviation of the data set used to calculate RF Mean..
- getRfSystem() - Method in class us.gov.dod.standard.ssrf._3_1.rfsystem.RelatedSystem
-
Get the reference of the System associated with the current System..
- getRFSystem() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getRFSystemRef() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the RFSystemRef
- getRFTuningStep() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the separation between the mean RF values of adjacent RFs in signal
with discrete RF channels..
- getRFValue() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFValues
-
Get the observed signals values.
- getRiseTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get the time required for a pulse to rise from 10% to 90 percent of the
mean peak amplitude of the voltage pattern..
- getRiseTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get an operational justification for short pulse rise time.
- getRole() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.UsingCountries
-
Get the role of the country associated with the emitter that transmits the
subject Notation/Signal..
- getRole() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get the code used to document the main role of the Force Element.
- getRole() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Get the RoleRef
- getRole() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getRoleRef() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
- getRotationDirection() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the antenna direction of rotation or motion..
- getRotationRateMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get if applicable, the maximum antenna rotation rate.
- getRotationRateMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the nominal or minimum antenna rotation rate..
- getRoutineAgendaItem() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the type of National Telecommunications and Information Administration
(NTIA) Frequency Assignment Subcommittee (FAS) agenda on which the
application will be processed.
- getRxAntModeRef() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Get the RxAntModeRef
- getRxDuration() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the amount of time that the equipment will monitor the spectrum before
initiating an action, in (0-999) hours, (0-59) minutes, and (0-999,999,999)
nanoseconds (hhh.mm.sssssssss).
- getRxEndpointID() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramLine
-
Get the Endpoint ID at the terminating (receiving) endpoint of a line on
the diagram.
- getRxMode() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Get the RxMode
- getRxModeRef() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Get the RxModeRef
- getRxModulation() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the RxModulation
- getRxRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the RxRef
- getRxSignalTuning() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the RxSignalTuning
- getRxType() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the type of receiver.
- getSATCOMPriority() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the satellite communication priority..
- getSatellite() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getSatelliteAffected() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get whether the interference affects satellite reception..
- getSatelliteChannel() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the identifier of satellite channel experiencing the interference..
- getSatelliteDownlinkPolarisation() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the polarisation of the satellite downlink signal..
- getSatelliteHemisphere() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the satellite hemisphere..
- getSatelliteLongitude() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the satellite longitude.
- getSatelliteName() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the name of the satellite experiencing the interference..
- getSatelliteTransponderID() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the satellite transponder ID..
- getSatelliteUplinkFreq() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the satellite uplink frequency experiencing the interference.
- getSatelliteUplinkPolarisation() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the polarisation of the satellite uplink signal..
- getScanAdaptiveDriverDesc() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the condition which controls or can be associated with the signal Scan
Period variations..
- getScanAdaptiveRuleDesc() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the rule which describes the signal Scan Period variations..
- getScanAngleAzStart() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the maximum angle the subject emitter antenna mainbeam (aka., mainlobe)
reaches in the horizontal plane (aka., azimuth)..
- getScanAngleAzStop() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the minimum angle the subject emitter antenna mainbeam (aka., mainlobe)
reaches in the horizontal plane (aka., azimuth)..
- getScanAngleElevStart() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the maximum angle the subject emitter antenna mainbeam (aka., mainlobe)
reaches in the vertical plane (aka., elevation)..
- getScanAngleElevStop() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the minimum angle the subject emitter antenna mainbeam (aka., mainlobe)
reaches in the vertical plane (aka., azimuth)..
- getScanDwell() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the scan duration.
- getScanDwellSequence() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the Sequence of dwell durations, with elevation and azimuth.
- getScanDwellTime() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get the time duration for a complete dwell/group of scan cycles which all
have the same Scan Period Discrete value before changing to a different
one..
- getScanElevContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get In Data Item ScanElevContinuous (US), indicate the if the scan
elevation progression is a continuous sweep..
- getScanPatternType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get In Data Item ScanPatternType (US), indicate whether the Scan Period is
unmodulated, Patterned, Non-Patterned, or Adaptive..
- getScansHorzContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get In Data Item ScanHorzContinuous (US), indicate the if the scan azimuth
progression is a continuous sweep..
- getScanType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get In Data Item ScanType (US), indicate if the observed data was detected
via a primary or secondary scan..
- getScanValue() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanValues
-
Get the observed scan rate values .
- getSecondaryDatasets() - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Get In Data Item SecondaryDatasets, indicate if datasets referenced by the
primary dataset are included..
- getSecondaryFirmware() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Get alternate mission-independent software that is "burned" and which stays
resident on the RF jamming hardware..
- getSecondHarmonicLevel() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the out-of-band emission level at the frequency that is two times the
fundamental frequency.
- getSeconds() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the seconds of hour [0-59] when the Assignment will be guarded
(monitored) or used for transmission..
- getSeconds() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the seconds of hour [0-59] that the Force element is planned for
deployment..
- getSeconds() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Get In Data Item Seconds,enter the seconds of hour [0-59].
- getSeconds() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get In Data Item Seconds,enter the seconds of hour [0-59].
- getSectBlanking() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get "Yes" if sector blanking is possible and "No" if it is not possible..
- getSecurityClass() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the US:SecurityClass
- getSemiMajorAxis() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Get the length of the semi-major axis of the ellipse.
- getSemiMinorAxis() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Get the length of the semi-minor axis of the ellipse..
- getSensitivityCriteriaLevel() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the value of the criteria; the meaning and unit of this value depends
on the Sensitivity Criteria Type selected..
- getSensitivityCriteriaText() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the value of the criteria when it cannot be expressed as a number..
- getSensitivityCriteriaType() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the criteria used to determine the minimum RF signal power present at
the input terminals that ensures acceptable detection and demodulation of
the desired signal..
- getSensitivityLevel() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the minimum RF signal power level as it relates to one of the four
Sensitivity Criteria Types: PWOP, SINAD, S/N or S+N/N indicated in item
SensitivityCriteriaType.
- getSeparateSystemJustification() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get the For trunked land mobile systems that are within 30 km of an
existing or planned trunked land mobile system authorised by NTIA, provides
the information required under subparagraph 8.2.48a of the NTIA Manual
("Procedures and Principles for the Assignment and Coordination of
Frequencies, Land Mobile Radio Communications")..
- getSequence() - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Get a unique, sequenced, index for each point describing the current
polygon..
- getSequenceBitLength() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Get In Data Item US: SequenceBitLength (US), enter the length of one
sequence of a pattern of bits that been observed repeating..
- getSerial() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Get the serial of the referenced Dataset..
- getSerial() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
- getSerial() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get a unique Dataset identifier.
- getSerial() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
- getSerial() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntryLocation
-
- getSerial() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Set the serial number Serial identifier component.
- getSerial() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Set the serial number Serial identifier component.
- getSerial() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
- getSerial() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
- getSerial() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
- getSerial() - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
- getSerial() - Method in class us.gov.dod.standard.ssrf._3_1.rfsystem.RelatedSystem
-
- getSerialAsNumber() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Set the serial number Serial identifier component.
- getSerialAsNumber() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Set the serial number Serial identifier component.
- getServiceArea() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get the ServiceArea
- getServiceVolumeHeight() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Get the altitude of aeronautical navigational aids, air traffic control
assignments for radio frequencies above 30 MHz, and low-frequency beacons.
- getServiceVolumeLocRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Get the reference to a Location for an aeronautical coverage area.
- getServiceVolumeRadius() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Get the radius associated with the Location to produce a circle.
- getShape() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get a code used to describe the general shape of the antenna reflector..
- getSidebandSuppressed() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get the sideband that is suppressed in a single sideband signal..
- getSidebandSuppression() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get the amount that one or both of the sidebands of a signal are reduced
prior to transmission.
- getSignal() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the waveform information modulated, or impressed, on the carrier..
- getSignalDurationMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Get the maximum time value for how long the tone persists in the baseband.
- getSignalDurationMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Get the minimum time value for how long the tone persists in the baseband..
- getSignalSequenceDesc() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Get the pattern of occurrence of sub-signals.
- getSignalShape() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Get the basic shape of the signal..
- getSignalType() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Get the type of modulation..
- getSignalType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get In Data Item SignalType (US), indicate the specific type of modulation
used/detected..
- getSiteElevation() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Get the site elevation of each base station and repeater in a trunking
system..
- getSoftware() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Get the mission-specific software that is loaded on the RF jamming
hardware..
- getSolution() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get what actions were taken to resolve the interference..
- getSource() - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Get the source or creator of the note..
- getSource() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Get the name of the organisation or authority that is the source of the
comment.
- getSourceAz() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the measured azimuth of the source from the victim..
- getSourceClsDate() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Get the date this classified dataset was prepared, i.e., the Original
Classification Date..
- getSourceEmsBw() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the calculated or measured bandwidth of the interference source..
- getSourceEmsClass() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get In Data Item SourceEmsClass, In Data Item EmsClass, enter a three to
five characters code, derived from the table below, representing the
emission classification.
- getSourceFieldStrength() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the measured electromagnetic field strength..
- getSourceFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the maximum frequency of the interference, in case of a range..
- getSourceFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the nominal frequency of the interference, or the minimum frequency in
case of a range..
- getSourceLat() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the geographical latitude (degrees, minutes, seconds and hemisphere N
or S) of the source of the interference.
- getSourceLocDescr() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the approximate position the source, if exact coordinates are not
known..
- getSourceLon() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the geographical longitude (degrees, minutes, seconds, and hemisphere E
or W) of the source of the interference.
- getSpectralPowerDensity() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxAntModeRef
-
Get the maximum spectral power density supplied to the input of the
antenna..
- getSpectrumLink() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get whether the transmitter(s) communicate or interact with the receiver(s)
in this Configuration, i.e.
- getSpeed() - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Get the speed of the force element along a straight route or to the next
waypoint..
- getSpreadSpectrum() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the Spread Spectrum
- getSpreadSpectrum() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the Spread Spectrum
- getSpuriousLevel() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the maximum of all emission levels which occur outside the bandwidth of
the fundamental emission and not at a harmonic frequency.
- getSpuriousRejection() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the spurious receiver responses that arise when strong undesired
signals and the receiver local oscillator (LO) combine in the mixer to
produce a frequency on or near the intermediate frequency.
- getSSReply() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getSSRequest() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getSsRequest() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the dataset identifier of the SSRequest being replied to..
- getSsRequest() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Get a Serial reference to a superseded or related SSRequest application..
- getSSRequestRef() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the dataset identifier of the SSRequest being replied to..
- getSSRequestRef() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Get a Serial reference to a superseded or related SSRequest application..
- getStage() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the current stage of the system..
- getStageLocation() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the StageLocation
- getStageLocation() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Get the StageLocation
- getStageNum() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Get the position of the IF stage being described..
- getStandOffDist() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get the required distance from the jammer to non-threat equipment, in km..
- getStartDate() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Get the date upon which work will commence on this stage..
- getStartDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Get the timestamp when the denial of spectrum use is planned to begin..
- getStartDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get the date/time stamp when to initiate the jamming, if "Date/Time" is
used in element StartTrigger.
- getStartLocation() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get the Location serial indicating the region associated with "Troops in
Region" or "Troops Not in Region", in attribute StartTrigger..
- getStartLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
- getStartTrigger() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get the type of trigger that indicates when it is time to start jamming..
- getState() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Get the action performed for this status log entry..
- getState() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get the state of the dataset.
- getStateCounty() - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Get the state or other sub-national political area..
- getStateCounty() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get the state or other sub-national political area..
- getStation() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the Station
- getStationConfig() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Get the StationConfig
- getStationControl() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get the operating unit that controls the station when different than the
assignment users..
- getStationID() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get the unique identifier of one of the stations used by this Assignment at
this specific Station.
- getStationID() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get the unique identifier of one of the stations used by this Assignment at
this specific Station.
- getStationLoc() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get the US:StationLoc
- getStationName() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get a short descriptive name for the station.
- getStatisticalIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationValues
-
Get In Data Item StatisticalIndicator (US), indicate how this specific data
observation was collected (e.g., 95% of the observed values).
- getStatisticalIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanValues
-
Get In Data Item StatisticalIndicator (US), indicate how this specific data
observation was used (e.g., 95% of the observed values).
- getStatisticalIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPValues
-
Get In Data Item StatisticalIndicator (US), indicate how this specific data
observation was used (e.g., 95% of the observed values).
- getStatisticalIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Get In Data Item StatisticalIndicator (US), indicate how this specific data
observation was collected (e.g., 95% of the observed values).
- getStatisticalIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Get In Data Item StatisticalIndicator (US), indicate how this specific data
observation was collected (e.g., 95% of the observed values).
- getStatisticalIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFValues
-
Get In Data Item StatisticalIndicator (US), indicate how this specific data
observation was collected (e.g., 95% of the observed values).
- getStatus() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Get the status of the future, prior, or associated, Notation..
- getStatus() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Get the status of the future, prior, or associated, Notation..
- getStatus() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Get the status of the Deployment..
- getStatusChangeDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Get the timestamp when the prior, or associated, Notation achieved this
Status..
- getStatusLog() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the US:StatusLog
- getStatusLog() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the US:StatusLog
- getStnClass() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
Get the station class, as defined by the appropriate Administration..
- getStnClass() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Get the StnClass
- getStockNum() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get the US:StockNum
- getStockNum() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.StockNum
-
Get the stock number of the system/equipment..
- getStockNum() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Get the US:StockNum
- getStopDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Get the timestamp when the denial of spectrum use is planned to be halted..
- getStopDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get the date/time stamp when to stop the jamming, if "Date/Time" is used in
element StopTrigger.
- getStopLocation() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get the Location serial indicating the region associated with "Troops in
Region" or "Troops Not in Region", in attribute StopTrigger..
- getStopLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
- getStopTrigger() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get the type of trigger that indicates when it is time to stop jamming..
- getStreet() - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Get the street address..
- getStreet() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get the street address..
- getSubcarrierFreq() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the SubcarrierFreq
- getSubcarrierTone() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Get the SubcarrierTone
- getSupplementaryDetails() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get amplifying information that would facilitate processing.
- getSupportabilityCode() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get the overall result of the national analysis.
- getSymbolSize() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get the number of bits in the symbols being generated.
- getSyncMethod() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Get a description of the timing synchronisation method used by the timing
deconfliction protocol..
- getSysName() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.SysOfStation
-
Get the name of the system to which the frequency assignment belongs.
- getSysOfStation() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the SysofStation
- getSysRelationEssential() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get .
- getTAD() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Get the TAD associated to the assigned frequency.
- getTargetDate() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Get the date by which a usable version of the system is expected to be
available for testing or deployment..
- getTargetID() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Get a unique (within the parent JammingPlan) numeric identifier to
distinguish one target from another..
- getTechniques() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get how many ramp techniques occur during the programmed frequency range
dwell time..
- getTelephoneFax() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Get the TelephoneFax
- getTelephoneFax() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Get the TelephoneFax
- getTelephoneFax() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Get the TelephoneFax
- getTerminationDate() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Get the date this stage is expected to terminate.
- getTerrainElevation() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Get the elevation of the base of the transmitting antenna structure above
Mean Sea Level (MSL)..
- getText() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Get the textual specification of the footnote, band user or band
application..
- getThirdHarmonicLevel() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the out-of-band emission level at the frequency that is three times the
fundamental frequency.
- getThreat() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get a short description of the threat name or threat type..
- getTiltAngleAdaptiveDriverDesc() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the condition which controls, or can be associated with, the signals
Tilt Angle variations..
- getTiltAngleAdaptiveRuleDesc() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the rule which describes the signal Polarisation Tilt Angle
variations..
- getTiltAngleContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get whether the tilt angle variations are Discrete or Continuous.
- getTiltAngleDuration() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the time duration for a complete dwell/group of pulses which all have
the same discrete Polarisation Tilt Angle value, or for a continuous wave
at a constant Polarisation Tilt Angle value..
- getTiltAngleExtremeMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the upper end of the range of Polarisation Tilt Angle values that
represent 100% of observed Tilt Angle values, from a statistical study of
the data set.
- getTiltAngleExtremeMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the lower end of the range of Polarisation Tilt Angle values that
represent 100% of observed Tilt Angle values, from a statistical study of
the data set..
- getTiltAngleMean() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the average Polarisation Tilt Angle value for a signal which changes
Polarisation Tilt Angle values on a non-patterned basis..
- getTiltAngleMedian() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the observed Polarisation Tilt Angle value that the signal most often
used, based on statistical study of the data set..
- getTiltAnglePatternPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the time duration for one complete cycle of a repeating Polarisation
Tilt Angle sequence.
- getTiltAnglePatternType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get In Data Item TiltAnglePatternType (US), indicate whether Tilt Angle is
unmodulated or Tilt Angle variations are Patterned, Non-Patterned, or
Adaptive..
- getTiltAngleRangeMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the highest discrete Polarisation Tilt Angle value found in a single
intercept that contains the complete Polarisation Tilt Angle
characteristics.
- getTiltAngleRangeMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the lowest discrete Polarisation Tilt Angle value found in a single
intercept that contains the complete Polarisation Tilt Angle
characteristics.
- getTiltAngleRate() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the rate of change for Polarisation Tilt Angle variations expressed in
Polarisation Tilt Angle changes per unit of time..
- getTiltAngleSequenceDesc() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get a free text description of the sequence of Polarisation Tilt Angle
values..
- getTiltAngleStdDev() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the standard deviation of the data set used to calculate Polarisation
Tilt Angle Mean fields..
- getTiltAngleStep() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get the delta between the Most Probable Polarisation Tilt Angle values of
adjacent and discrete Polarisation Tilt Angle values..
- getTiltAngleValue() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationValues
-
Get the observed Tilt Angle which provided the base data set used for
statistical study..
- getTime() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get if the system is used in a wartime environment..
- getTimeHopNumSlots() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the number of time slots..
- getTimeHopPulsesPerDwell() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the number of pulses transmitted during each dwell..
- getTimingDeconflictionProtocol() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the US:TimingDeconflictionProtocol
- getTitle() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Get an identifying name for this Allotment or Assignment..
- getTitle() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get an identifying name for this Allotment or Assignment..
- getTitle() - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Get the title of the source document..
- getTitle() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Get the full title of the document..
- getTitle() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the title of the Spectrum Supportability application.
- getTitle() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Get an identifying name for this Table of Allocations..
- getTitleRank() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Get the contact title or rank e.g., Ms, Col, etc..
- getTOA() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getTransmitter() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Get the serial of a Transmitter in this configuration.
- getTransmitter() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get
- getTriggerOff() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Get the time that the jammer is off (listening)..
- getTriggerOn() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Get the time that the jammer is on (jamming)..
- getTrunking() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the US:Trunking
- getTrunkingAssignment() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get the US:TrunkingAssignment
- getTSDF() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get .
- getTSPR() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Get the telecommunications service priority applicable to a
spectrum-dependent radiocommunications system intended to be used in direct
support of a national emergency declared under Section 706 of the
Communications Act of 1934, as amended..
- getTSPR() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get the telecommunications service priority applicable to a
spectrum-dependent radiocommunications system intended to be used in direct
support of a national emergency declared under Section 706 of the
Communications Act of 1934, as amended..
- getTSPR() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get the telecommunications service priority applicable to a
spectrum-dependent radiocommunications system intended to be used in direct
support of a national emergency declared under Section 706 of the
Communications Act of 1934, as amended..
- getTunability() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the tuning capability..
- getTunability() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the tuning capability..
- getTuning() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Get the Tuning
- getTuningMethod() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get the device or process used to tune the equipment through the RF
spectrum..
- getTuningMethod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the device or process used to tune the equipment through the RF
spectrum..
- getTuningStep() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Get the tuning increment..
- getTuningStep() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Get the tuning increment expressed of the requested frequency range.
- getTuningStep() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Get the tuning increment..
- getTuningStep() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get the separation between the mean RF values of adjacent RFs in signal
with discrete RF channels..
- getTuningStep() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Get the tuning increment..
- getTxAntModeRef() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Get the TxAntModeRef
- getTxDuration() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get the amount of time that the equipment will emit a jamming signal, in in
(0-999) hours, (0-59) minutes, and (0-999,999,999) nanoseconds
(hhh.mm.sssssssss).
- getTxEndpointID() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramLine
-
Get the Endpoint ID at the originating (transmitting) endpoint of a line on
the diagram.
- getTxMode() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get the TxMode
- getTxModeRef() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Get the TxModeRef
- getTxModulation() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the TxModulation
- getTxRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the TxRef
- getTxSignalTuning() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get the TxSignalTuning
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
Get the function of the referenced Contact or Organisation within the
current dataset..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Project
-
Get the type of project..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Get the type of the pattern cut.
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Get the type of nomenclature (commercial, military, etc)..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get whether the StationConfig is acting as a transmitter, receiver or
transceiver..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.common.CaseNum
-
Get a text identifying the type of case number (national file, exercise
name, etc)..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Get the type of network hosting the e-mail address..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Get the name of the network on which this number can be dialed (e.g., DSN,
IVSN, CORMORANT).
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Get the type of information referenced by this external reference..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the type of deployment..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get if the Force Element is a Unit or a Platform..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.StockNum
-
Get the type of stock number..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Get the type of Notation..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Get the type of Notation..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.PotentialVictims
-
Get the type of Notation.
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Get the type of relationship..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
Get the type of relationship..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Get a code defining the type of curve..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Get the type of deployment..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get the type of spread spectrum system being used..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
Get if this is a specific or typical earth station..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Get the type of dependency between the current dataset and the referred
application..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Get the stage..
- getType() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Get the type of variance..
- getTypeOfService() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the type of service or circuit involved..
- getUIC() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get an organisational identifier that may be used to uniquely identify an
organisation in operational planning systems and other non-spectrum
information systems..
- getUIC() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Get an organisational identifier that may be used to uniquely identify an
organisation in operational planning systems and other non-spectrum
information systems..
- getUsage() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get the Usage
- getUsageCode() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the usage and category of circuits..
- getUsageDescription() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Time
-
Get a description of the total amount of time a system/equipment is
expected to be in operation..
- getUsageFrequency() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the general amount of time when the frequency assignment frequencies
will be either guarded (monitored) or used for transmission..
- getUsagePercentage() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the percentage of time the transmitter equipment is in use during the
scheduled hours of operation..
- getUsageType() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Get the type of assignment request or approved assignment/allotment.
- getUsageType() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the type of assignment request or approved assignment or allotment.
- getUseIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Get the permitted uses of this band (e.g., "Government", "Non-government",
etc)..
- getUser() - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Get a specific user of this channel in the channel plan..
- getUserCode() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get a code identifying the user of the station..
- getUserNetCode() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get a unique code that identifies the specific user of the frequency, i.e.,
the command, activity, unit, project, etc..
- getUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the US:UsingCountries
- getUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Get the US:UsingCountries
- getUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Get the US:UsingCountries
- getUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Get the US:UsingCountries
- getUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get the US:UsingCountries
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Code
-
Get the unique code entry within the code list..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.ChannelFreq
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.common.Remarks
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Altitude
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.AntHeight
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Az
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Az180
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.BitRate
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.BurstRate
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.CodeRate
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.CurvePointLevel
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.D
-
Gets the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DaysOfMonth
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DaysOfWeek
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dB
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBi
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Dble
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBm
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBW
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBWHz
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DigestCode
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Dimension
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DistEarth
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DistSpace
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DT
-
Gets the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Duration_UN4
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Elev
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Elev180
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.EmsDes
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FieldStrength
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqH
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqM
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqOffset
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Height_UN4
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.hops
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Hours
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.IFNum
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.InfoDataRate
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.kChirps
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Kelvins
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Lat
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Lon
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MChips
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MEMO
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.microsecs
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.millisecs
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MinSec
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.minutes
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Months
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.NavAidChnl
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.NetNumber
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Percent
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.platform
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.priority
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.PulseRate
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Rejection_DB1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Rejection_DB2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Releasability
-
Deprecated.
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.RFChgRate
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.RotationRate
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S10
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S100
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S11
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S12
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S14
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S15
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S150
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S16
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S18
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S20
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S200
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S22
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S24
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S25
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S255
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S3
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S30
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S35
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S4
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S40
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S5
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S50
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S500
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S6
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S60
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S7
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S70
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S8
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S80
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S9
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanRate
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanSpeed
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SCLevel
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Gets the SSRF SERIAL number value.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_4_1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_5_2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SmallMicrosecs
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_15
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_6
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN3_1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN4_1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_3
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_4
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_6
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_8
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Speed
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TBD
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TSDFValue
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TString
-
Gets the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_3
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_4
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_6
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN11_8
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_3
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_4
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_6
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16_15
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN18_6
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2_1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_3
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_4
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_3
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_4
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_4
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_5
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_3
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_4
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_5
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_6
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_3
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_4
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_5
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_6
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_7
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB_5_2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US1
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US10
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US12
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US15
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US20
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US3
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US30
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US4
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US40
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US5
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US50
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US6
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Bits
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB150
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB90
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBm
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBW
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWHz
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWS
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Deg_Signed
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees90
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Duration
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Elev
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgAm
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgFm
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPFm
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent2
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent3
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngle
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngleRate
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPM
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPS
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PRIChgRate
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanRate
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanSpeed
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_TiltAngRate
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Twips
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_UN16_9
-
Get the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Years
-
Get the value of the value property.
- getValue() - Method in interface us.gov.dod.standard.ssrf._3_1.metadata.IMetadataType
-
Gets the value of the value property.
- getValue() - Method in enum us.gov.dod.standard.ssrf._3_1.metadata.lists.ListCAO
-
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TDate
-
Gets the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TDateTime
-
Gets the value of the value property.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Gets the SSRF SERIAL number value.
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Get a value that is most probably correct..
- getValue() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Get a value that is most probably correct..
- getVariance() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Get the Variance
- getVersion() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Get the current version of the Radiation Plan..
- getVersion() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get the current version of the Jamming Plan..
- getVertAperture() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the vertical cross-section of the antenna radiation pattern in the
direction of highest gain..
- getVertBwMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the maximum vertical beamwidth for beamwidths which vary with the
frequency.
- getVertBwMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Get the maximum angle of the vertical component of the antenna mainbeam
measured at the half-power (-3 dB) points of its maximum vertical width.
- getVertBwMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the minimum or nominal vertical beamwidth..
- getVertBwMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Get the minimum angle of the vertical component of the antenna mainbeam
measured at the half-power (-3 dB) points of its maximum vertical width..
- getVertDimension() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the linear vertical dimension of the antenna..
- getVertScanAngleMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the maximum limit of the vertical arc scanned relative to the
horizontal.
- getVertScanAngleMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the minimum limit of the vertical arc scanned relative to the
horizontal..
- getVertScanRate() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the number of complete vertical scans per minute.
- getVertScanSpeed() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the number of degrees of vertical scan per second.
- getVertScanType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the antenna vertical scanning capability..
- getVertSidelobeAttenuation() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the attenuation of the sidelobe relative to the main beam gain..
- getVertSidelobeElev() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get the first sidelobe in the vertical plane.
- getVertSidelobeSuppressed() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get whether a portion of the radiation from an antenna outside of the main
beam has been suppressed or eliminated...
- getVictimAsgnRef() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
- getVictimAssignment() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get In Data Item VictimAsgnRef, Enter the serial number of the assignment
victim of the interference.
- getVictimCountry() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the country or area where the victim of the interference is located..
- getVictimFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the upper frequency of the range, in case of an assignment over a
frequency range..
- getVictimFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the nominal or lower frequency used by the victim of the interference..
- getVictimLat() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the geographical latitude (degrees, minutes, seconds and hemisphere N
or S) of the victim of the interference.
- getVictimLocDescr() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the approximate position the victim of the interference, if exact
coordinates are not known..
- getVictimLon() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the geographical longitude (degrees, minutes, seconds, and hemisphere E
or W) of the victim of the interference.
- getVictimName() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.PotentialVictims
-
Get the name or nomenclature of a system that may be negatively impacted by
the subject Notation/Signal..
- getVictimNotation() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.PotentialVictims
-
Get the designator for a specific emitter that may be negatively impacted
by the subject Notation/Signal..
- getVictimSystem() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get the nomenclature or other identifier of equipment experiencing the
interference..
- getVSWR() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get the VSWR
- getWartimeUse() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get if the system is used in a wartime environment..
- getWaypointIdx() - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Get the sequential index of a Point within the referenced Location.
- getYears() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get the 4-digit year [1900..2100] when the Assignment will be guarded
(monitored) or used for transmission..
- getYears() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get the 4-digit year [1900..2100] that the Force element is planned for
deployment..
- getYears() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Get the 4-digit year [1900..2100]..
- getYears() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get the 4-digit year [1900..2100]..
- idref - Variable in class us.gov.dod.standard.ssrf._3_1.Common
-
idref - Data Item ID (Optional)
- idref - Variable in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
idref - Data Item ID (Optional)
- IFNum - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF IFNum data type.
- IFNum() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.IFNum
-
Construct a new, empty IFNum instance.
- IFNum(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.IFNum
-
Construct a new IFNum instance with the given initial value.
- IMetadataType - Interface in us.gov.dod.standard.ssrf._3_1.metadata
-
An interface type to support XMLJavaTypeAdapters for the numeric types.
- InfoDataRate - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF InfoDataRate data type.
- InfoDataRate() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.InfoDataRate
-
Construct a new, empty InfoDataRate instance.
- InfoDataRate(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.InfoDataRate
-
Construct a new InfoDataRate instance with the given initial value.
- InfoDataRate(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.InfoDataRate
-
Construct a new InfoDataRate instance with the given initial value.
- Installation - Class in us.gov.dod.standard.ssrf._3_1.receiver
-
Installation identifies the specific platforms on which an equipment is
installed, whether it is mounted at a fixed site atop a mountain, in a
shelter, in a vehicle, aboard a helicopter, etc.
- Installation() - Constructor for class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
- IntfReport - Class in us.gov.dod.standard.ssrf._3_1
-
IntfReport contains information on a source and victim of an interference
incident.
- IntfReport() - Constructor for class us.gov.dod.standard.ssrf._3_1.IntfReport
-
No arg constructor.
- intfReport - Variable in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
- isRequired(Field) - Static method in class us.gov.dod.standard.ssrf.SSRFUtility
-
Inspect a class field and determine if it is required.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Code
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Emission
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Project
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntEfficiency
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPatternPoint
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Manufacturer
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationValues
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanValues
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.UsingCountries
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.VSWR
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CoordinationData
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.NarrowBandPlanning
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.RecordNote
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.SysOfStation
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.ChannelFreq
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ChannelPlan
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.common.CaseNum
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.common.Remarks
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.StockNum
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntryLocation
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Altitude
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.AntHeight
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Az
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Az180
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.BitRate
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.BurstRate
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.CodeRate
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.CurvePointLevel
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.D
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DaysOfMonth
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DaysOfWeek
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dB
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBi
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Dble
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBm
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBW
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBWHz
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DigestCode
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Dimension
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DistEarth
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DistSpace
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DT
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Duration_UN4
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Elev
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Elev180
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.EmsDes
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FieldStrength
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqH
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqM
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqOffset
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Height_UN4
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.hops
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Hours
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.IFNum
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.InfoDataRate
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.kChirps
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Kelvins
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Lat
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Lon
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MChips
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MEMO
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.microsecs
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.millisecs
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MinSec
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.minutes
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Months
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.NavAidChnl
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.NetNumber
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Percent
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.platform
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.priority
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.PulseRate
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Rejection_DB1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Rejection_DB2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Releasability
-
Deprecated.
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.RFChgRate
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.RotationRate
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S10
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S100
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S11
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S12
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S14
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S15
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S150
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S16
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S18
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S20
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S200
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S22
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S24
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S25
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S255
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S3
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S30
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S35
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S4
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S40
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S5
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S50
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S500
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S6
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S60
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S7
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S70
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S8
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S80
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S9
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanRate
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanSpeed
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SCLevel
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_4_1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_5_2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SmallMicrosecs
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_15
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_6
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN3_1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN4_1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_3
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_4
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_6
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_8
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Speed
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TBD
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TSDFValue
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TString
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_3
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_4
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_6
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN11_8
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_3
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_4
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_6
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16_15
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN18_6
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2_1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_3
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_4
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_3
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_4
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_4
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_5
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_3
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_4
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_5
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_6
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_3
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_4
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_5
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_6
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_7
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB_5_2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US1
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US10
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US12
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US15
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US20
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US3
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US30
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US4
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US40
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US5
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US50
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US6
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Bits
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB150
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB90
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBm
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBW
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWHz
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWS
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Deg_Signed
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees90
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Duration
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Elev
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgAm
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgFm
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPFm
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent2
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent3
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngle
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngleRate
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPM
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPS
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PRIChgRate
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanRate
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanSpeed
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_TiltAngRate
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Twips
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_UN16_9
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Years
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TDate
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TDateTime
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigEmission
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPValues
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.PotentialVictims
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxAntModeRef
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxModeRef
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.CurvePoint
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.rfsystem.RelatedSystem
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.StageLocation
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramLine
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Time
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFValues
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the required fields in this SSRF data type instance are set.
- isSet() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Determine if the required fields in this SSRF data type instance are set.
- isSetAction() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Determine if the Action is configured.
- isSetAction() - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Determine if the Action is configured.
- isSetActivationPower() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the ActivationPower is configured.
- isSetActivationTime() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the ActivationTime is configured.
- isSetActualEffect() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Determine if the ActualEffect is configured.
- isSetActualPerformance() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Determine if the ActualPerformance is configured.
- isSetAdditionalChannelsRationale() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the AdditionalChannelsRationale is configured.
- isSetAddress() - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Determine if the Address is configured.
- isSetAddress() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Determine if the Address is configured.
- isSetAddress() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Determine if the Address is configured.
- isSetAddress() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Determine if the Address is configured.
- isSetAdjacentChannelSelectivity() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the AdjacentChannelSelectivity is configured.
- isSetAdministration() - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Determine if the Administration is configured.
- isSetAdministration() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the Administration is configured.
- isSetAdministration() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Determine if the Administration is configured.
- isSetAdministration() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Determine if the Administration is configured.
- isSetAdministrative() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the Administrative is configured.
- isSetAffectedCSA() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the AffectedCSA is configured.
- isSetAffectedEquipment() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the AffectedEquipment is configured.
- isSetAgencyActionNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the AgencyActionNum is configured.
- isSetAgencyCode() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Determine if the AgencyCode is configured.
- isSetAgencyComments() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the AgencyComments is configured.
- isSetAgencySerialNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the AgencySerialNum is configured.
- isSetAgencySerialNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Determine if the AgencySerialNum is configured.
- isSetAgencySerialNum() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Determine if the AgencySerialNum is configured.
- isSetAllocatedByFootnote() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Determine if the AllocatedByFootnote is configured.
- isSetAllocatedService() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Determine if the AllocatedService is configured.
- isSetAllocatedService() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Determine if the AllocatedService is configured.
- isSetAllocation() - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Determine if the Allocation is configured.
- isSetAllotChannel() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Determine if the AllotChannel is configured.
- isSetAllotFreq() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Determine if the AllotFreq is configured.
- isSetAllotment() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the Allotment is configured.
- isSetAlternateIdentifier() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Determine if the AlternateIdentifier is configured.
- isSetAlternateName() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Determine if the AlternateName is configured.
- isSetAltitudeMax() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Determine if the AltitudeMax is configured.
- isSetAltitudeMax() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Determine if the AltitudeMax is configured.
- isSetAltitudeMax() - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Determine if the AltitudeMax is configured.
- isSetAltitudeMin() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Determine if the AltitudeMin is configured.
- isSetAltitudeMin() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Determine if the AltitudeMin is configured.
- isSetAltitudeMin() - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Determine if the AltitudeMin is configured.
- isSetAMIdx() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the AMIdx is configured.
- isSetAMRMSIdx() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the AMRMSIdx is configured.
- isSetAntEfficiency() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the AntEfficiency is configured.
- isSetAntenna() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
Determine if the antenna field is configured.
- isSetAntenna() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the Antenna is configured.
- isSetAntennaHeight() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Determine if the AntennaHeight is configured.
- isSetAntFeedpointHeight() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the AntFeedpointHeight is configured.
- isSetAntFeedpointHeight() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntryLocation
-
Determine if the AntFeedpointHeight is configured.
- isSetAntFreqs() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the AntFreqs is configured.
- isSetAntGain() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the AntGain is configured.
- isSetAntHardware() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the AntHardware is configured.
- isSetAntMode() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the AntMode is configured.
- isSetAntPattern() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the AntPattern is configured.
- isSetAntPatternPoint() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Determine if the AntPatternPoint is configured.
- isSetAntStabilisation() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the AntStabilisation is configured.
- isSetAntStructureHeight() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the AntStructureHeight is configured.
- isSetAntType() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the AntType is configured.
- isSetApertureDiameter() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the ApertureDiameter is configured.
- isSetApplicationDate() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the ApplicationDate is configured.
- isSetApplicationSPSNumber() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the ApplicationSPSNumber is configured.
- isSetApprovalLevel() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the ApprovalLevel is configured.
- isSetApprovalSPSNum() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the ApprovalSPSNum is configured.
- isSetApprovedBy() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the ApprovedBy is configured.
- isSetApprovedDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the ApprovedDateTime is configured.
- isSetAsgnAllotOwner() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the AsgnAllotOwner is configured.
- isSetAsgnAllotRef() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the AsgnAllotRef is configured.
- isSetAsset() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
Determine if the asset field is configured.
- isSetAssets() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the Assets is configured.
- isSetAssigned() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Determine if the Assigned is configured.
- isSetAssignment() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Determine if the assignment field is configured.
- isSetAssignment() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the Assignment is configured.
- isSetAssignmentAllotment() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the assignmentAllotment field is configured.
- isSetAssignmentAuthority() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the AssignmentAuthority is configured.
- isSetAssignmentDate() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the AssignmentDate is configured.
- isSetAssignmentRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Determine if the AssignmentRef is configured.
- isSetAtWaypoint() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the AtWaypoint is configured.
- isSetAuthor() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Determine if the Author is configured.
- isSetAuthor() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Determine if the Author is configured.
- isSetAuthorised() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
Determine if the Authorised is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Determine if the Availability is configured.
- isSetAvailability() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Determine if the Availability is configured.
- isSetAvailable() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
Determine if the Available is configured.
- isSetAvgPowerMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the AvgPowerMax is configured.
- isSetAvgPowerMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the AvgPowerMin is configured.
- isSetAxialRatio() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the AxialRatio is configured.
- isSetAzBoresightAngle() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the AzBoresightAngle is configured.
- isSetAzimuth() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Determine if the Azimuth is configured.
- isSetAzScanChangeRate() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the AzScanChangeRate is configured.
- isSetAzScanRateExtremeMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the AzScanRateExtremeMax is configured.
- isSetAzScanRateExtremeMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the AzScanRateExtremeMin is configured.
- isSetAzScanRateMean() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the AzScanRateMean is configured.
- isSetAzScanRateMedian() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the AzScanRateMedian is configured.
- isSetAzScanSector() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the AzScanSector is configured.
- isSetAzScanSectorMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the AzScanSectorMax is configured.
- isSetAzScanVelocity() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the AzScanVelocity is configured.
- isSetAzStart() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Determine if the AzStart is configured.
- isSetAzStop() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Determine if the AzStop is configured.
- isSetBandwidth() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Determine if the Bandwidth is configured.
- isSetBandwidth() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the Bandwidth is configured.
- isSetBaseband() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the Baseband is configured.
- isSetBaseband() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the Baseband is configured.
- isSetBeamType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the BeamType is configured.
- isSetBeamType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Determine if the BeamType is configured.
- isSetBearing() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the Bearing is configured.
- isSetBitDuration() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Determine if the BitDuration is configured.
- isSetBitDuration() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Determine if the BitDuration is configured.
- isSetBitRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Determine if the BitRate is configured.
- isSetBlanking() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the Blanking is configured.
- isSetBurstDuration() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the BurstDuration is configured.
- isSetBurstNumPulses() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the BurstNumPulses is configured.
- isSetBurstOffTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the BurstOffTime is configured.
- isSetBurstRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the BurstRate is configured.
- isSetBw() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Determine if the Bw is configured.
- isSetCalculated() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Determine if the Calculated is configured.
- isSetCalculated() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Determine if the Calculated is configured.
- isSetCalculated() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Determine if the Calculated is configured.
- isSetCalculated() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Determine if the Calculated is configured.
- isSetCallSign() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the CallSign is configured.
- isSetCallSign() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the CallSign is configured.
- isSetCarrierSuppression() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the CarrierSuppression is configured.
- isSetCarrierWaveform() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the CarrierWaveform is configured.
- isSetCaseNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the CaseNum is configured.
- isSetCaseNum() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the CaseNum is configured.
- isSetCenterFreq() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the CenterFreq is configured.
- isSetChangeDate() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.NarrowBandPlanning
-
Determine if the ChangeDate is configured.
- isSetChannel() - Method in class us.gov.dod.standard.ssrf._3_1.ChannelPlan
-
Determine if the Channel is configured.
- isSetChannelDwell() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the ChannelDwell is configured.
- isSetChannelFreq() - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Determine if the ChannelFreq is configured.
- isSetChannelPlan() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the ChannelPlan is configured.
- isSetChannelPlan() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Determine if the channelPlan field is configured.
- isSetChannelPlan() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Determine if the channelPlan field is configured.
- isSetChannelPlanRef() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Determine if the ChannelPlanRef is configured.
- isSetChannelPlanRef() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Determine if the ChannelPlanRef is configured.
- isSetChannelSpacing() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the ChannelSpacing is configured.
- isSetChannelSpacing() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Determine if the ChannelSpacing is configured.
- isSetCharacteristics() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the Characteristics is configured.
- isSetChipRate() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the ChipRate is configured.
- isSetChipRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the ChipRate is configured.
- isSetCircuitRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the CircuitRemarks is configured.
- isSetCityArea() - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Determine if the CityArea is configured.
- isSetCityArea() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the CityArea is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.common.Remarks
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Determine if the Cls is configured.
- isSetCls() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Determine if the Cls is configured.
- isSetClsAuthority() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Determine if the ClsAuthority is configured.
- isSetClsDerived() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Determine if the ClsDerived is configured.
- isSetClsOrg() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Determine if the ClsOrg is configured.
- isSetClsReason() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Determine if the ClsReason is configured.
- isSetCmdLevel() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the CmdLevel is configured.
- isSetCOCOMGroup() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the COCOMGroup is configured.
- isSetCode() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Determine if the Code is configured.
- isSetCode() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Determine if the Code is configured.
- isSetCode() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Determine if the Code is configured.
- isSetCodeList() - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Determine if the CodeList is configured.
- isSetCodeListCode() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Determine if the CodeListCode is configured.
- isSetCodePeriod() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Determine if the CodePeriod is configured.
- isSetCodeRate() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Determine if the CodeRate is configured.
- isSetCodeRate() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the CodeRate is configured.
- isSetColourNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Determine if the ColourNum is configured.
- isSetColourWord() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Determine if the ColourWord is configured.
- isSetComment() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Determine if the Comment is configured.
- isSetComment() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Determine if the Comment is configured.
- isSetComments() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.RecordNote
-
Determine if the Comments is configured.
- isSetCommentSource() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the CommentSource is configured.
- isSetCompMethod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the CompMethod is configured.
- isSetCompRatio() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the CompRatio is configured.
- isSetConductedEmissions() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Determine if the ConductedEmissions is configured.
- isSetConfigApprovedBy() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the ConfigApprovedBy is configured.
- isSetConfigApprovedDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the ConfigApprovedDateTime is configured.
- isSetConfigEmission() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the ConfigEmission is configured.
- isSetConfigFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the ConfigFreq is configured.
- isSetConfigFreqUse() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Determine if the ConfigFreqUse is configured.
- isSetConfigID() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the ConfigID is configured.
- isSetConfigID() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the ConfigID is configured.
- isSetConfigID() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramLine
-
Determine if the ConfigID is configured.
- isSetConfiguration() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Configuration is configured.
- isSetConfiguration() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Determine if the Configuration is configured.
- isSetConfiguration() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the Configuration is configured.
- isSetConfiguration() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the Configuration is configured.
- isSetConnectorType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Determine if the ConnectorType is configured.
- isSetContact() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Determine if the contact field is configured.
- isSetContact() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the Contact is configured.
- isSetContactRef() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Determine if the ContactRef is configured.
- isSetContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the Continuous is configured.
- isSetContinuousUpdate() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Determine if the ContinuousUpdate is configured.
- isSetControlRequestNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the ControlRequestNum is configured.
- isSetCoordinationComments() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the CoordinationComments is configured.
- isSetCoordinationData() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the CoordinationData is configured.
- isSetCoordinationNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the CoordinationNum is configured.
- isSetCoordinationNum() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the CoordinationNum is configured.
- isSetCoordinationNum() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the CoordinationNum is configured.
- isSetCoordIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CoordinationData
-
Determine if the CoordIndicator is configured.
- isSetCositeSep() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the CositeSep is configured.
- isSetCositeSepDescription() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the CositeSepDescription is configured.
- isSetCountry() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Manufacturer
-
Determine if the Country is configured.
- isSetCountry() - Method in class us.gov.dod.standard.ssrf._3_1.common.CaseNum
-
Determine if the Country is configured.
- isSetCountry() - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Determine if the Country is configured.
- isSetCountry() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the Country is configured.
- isSetCountry() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Determine if the Country is configured.
- isSetCountry() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Determine if the Country is configured.
- isSetCountryName() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.UsingCountries
-
Determine if the CountryName is configured.
- isSetCouplingLoss() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
Determine if the CouplingLoss is configured.
- isSetCurrentStage() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the CurrentStage is configured.
- isSetCurve() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Determine if the Curve is configured.
- isSetCurve() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the Curve is configured.
- isSetCurvePoint() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Determine if the CurvePoint is configured.
- isSetCurves() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the Curves is configured.
- isSetCurves() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the Curves is configured.
- isSetCutAngle() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Determine if the CutAngle is configured.
- isSetCutType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Determine if the CutType is configured.
- isSetData() - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Determine if the data field is configured.
- isSetDataset() - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Determine if the Dataset is configured.
- isSetDatasetRef() - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Determine if the DatasetRef is configured.
- isSetDataSource() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the DataSource is configured.
- isSetDate() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Determine if the Date is configured.
- isSetDate() - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Determine if the Date is configured.
- isSetDate() - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Determine if the Date is configured.
- isSetDate() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Determine if the Date is configured.
- isSetDate() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Determine if the Date is configured.
- isSetDateApprovalRequired() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Determine if the DateApprovalRequired is configured.
- isSetDateReceivedByCountry() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the DateReceivedByCountry is configured.
- isSetDateResponseRequired() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Determine if the DateResponseRequired is configured.
- isSetDateResponseRequired() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the DateResponseRequired is configured.
- isSetDateResponseRequired() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the DateResponseRequired is configured.
- isSetDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Determine if the DateTime is configured.
- isSetDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Determine if the DateTime is configured.
- isSetDaysOfMonth() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the DaysOfMonth is configured.
- isSetDaysOfMonth() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the DaysOfMonth is configured.
- isSetDaysOfMonth() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Determine if the DaysOfMonth is configured.
- isSetDaysOfMonth() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the DaysOfMonth is configured.
- isSetDaysOfWeek() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the DaysOfWeek is configured.
- isSetDaysOfWeek() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the DaysOfWeek is configured.
- isSetDaysOfWeek() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Determine if the DaysOfWeek is configured.
- isSetDaysOfWeek() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the DaysOfWeek is configured.
- isSetDCSTrunk() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Determine if the DCSTrunk is configured.
- isSetDeclsDate() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Determine if the DeclsDate is configured.
- isSetDeclsEvent() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Determine if the DeclsEvent is configured.
- isSetDeclsType() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Determine if the DeclsType is configured.
- isSetDeployment() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Determine if the Deployment is configured.
- isSetDeployment() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Determine if the Deployment is configured.
- isSetDeployment() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the Deployment is configured.
- isSetDescription() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Code
-
Determine if the Description is configured.
- isSetDescription() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Determine if the Description is configured.
- isSetDescription() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
Determine if the Description is configured.
- isSetDescription() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Project
-
Determine if the Description is configured.
- isSetDescription() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the Description is configured.
- isSetDescription() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
Determine if the Description is configured.
- isSetDescription() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the Description is configured.
- isSetDescription() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the Description is configured.
- isSetDescription() - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Determine if the Description is configured.
- isSetDescription() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Determine if the Description is configured.
- isSetDescription() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the Description is configured.
- isSetDescription() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Determine if the Description is configured.
- isSetDescription() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the Description is configured.
- isSetDesiredEffect() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Determine if the DesiredEffect is configured.
- isSetDesiredPerformance() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Determine if the DesiredPerformance is configured.
- isSetDetailedFunction() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Determine if the DetailedFunction is configured.
- isSetDiagramEndpoint() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the DiagramEndpoint is configured.
- isSetDiagramLine() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the DiagramLine is configured.
- isSetDiameter() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the Diameter is configured.
- isSetDigitalModType() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Determine if the DigitalModType is configured.
- isSetDir() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPatternPoint
-
Determine if the Dir is configured.
- isSetDirection() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the Direction is configured.
- isSetDispatcher() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the Dispatcher is configured.
- isSetDispatcherExplanation() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the DispatcherExplanation is configured.
- isSetDistributionGroups() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the DistributionGroups is configured.
- isSetDocketNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the DocketNum is configured.
- isSetDocketNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Determine if the DocketNum is configured.
- isSetDocumentCls() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Determine if the DocumentCls is configured.
- isSetDowncls() - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Determine if the Downcls is configured.
- isSetDowngrade() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Determine if the Downgrade is configured.
- isSetDowngradeInfo() - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Determine if the DowngradeInfo is configured.
- isSetDuplexSep() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Determine if the DuplexSep is configured.
- isSetDuplexSep() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the DuplexSep is configured.
- isSetDuplexSepType() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Determine if the DuplexSepType is configured.
- isSetDuplexSepType() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the DuplexSepType is configured.
- isSetDuration() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Duration is configured.
- isSetDuration() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the Duration is configured.
- isSetDuration() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Determine if the Duration is configured.
- isSetDuration() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the Duration is configured.
- isSetDuration() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Determine if the Duration is configured.
- isSetDuration() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Determine if the Duration is configured.
- isSetDutyCycleMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the DutyCycleMax is configured.
- isSetDutyCycleMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the DutyCycleMin is configured.
- isSetDwell() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the Dwell is configured.
- isSetDwellTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the DwellTime is configured.
- isSetEarthCoverage() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the EarthCoverage is configured.
- isSetEarthStation() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the EarthStation is configured.
- isSetEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Determine if the EffectiveDate is configured.
- isSetEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Determine if the EffectiveDate is configured.
- isSetEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Determine if the EffectiveDate is configured.
- isSetEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the EffectiveDate is configured.
- isSetEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Determine if the EffectiveDate is configured.
- isSetEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Determine if the EffectiveDate is configured.
- isSetEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Determine if the EffectiveDate is configured.
- isSetEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the EffectiveDate is configured.
- isSetEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Determine if the EffectiveDate is configured.
- isSetEffectiveDate() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Determine if the EffectiveDate is configured.
- isSetEffectiveDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the EffectiveDateTime is configured.
- isSetEffectiveDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Determine if the EffectiveDateTime is configured.
- isSetEfficiency() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntEfficiency
-
Determine if the Efficiency is configured.
- isSetEIRPMax() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the EIRPMax is configured.
- isSetEIRPMax() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the EIRPMax is configured.
- isSetEIRPMin() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the EIRPMin is configured.
- isSetEIRPMin() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the EIRPMin is configured.
- isSetElevScanChangeRate() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ElevScanChangeRate is configured.
- isSetElevScanRateExtremeMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ElevScanRateExtremeMax is configured.
- isSetElevScanRateExtremeMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ElevScanRateExtremeMin is configured.
- isSetElevScanRateMean() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ElevScanRateMean is configured.
- isSetElevScanRateMedian() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ElevScanRateMedian is configured.
- isSetElevScanSector() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ElevScanSector is configured.
- isSetElevScanSectorMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ElevScanSectorMax is configured.
- isSetElevScanVelocity() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ElevScanVelocity is configured.
- isSetElevStart() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Determine if the ElevStart is configured.
- isSetElevStop() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Determine if the ElevStop is configured.
- isSetEllipse() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the Ellipse is configured.
- isSetEMail() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Determine if the EMail is configured.
- isSetEMail() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Determine if the EMail is configured.
- isSetEMail() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Determine if the EMail is configured.
- isSetEmergency() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Emergency is configured.
- isSetEmergency() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Determine if the Emergency is configured.
- isSetEmergency() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the Emergency is configured.
- isSetEmission() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Determine if the Emission is configured.
- isSetEmsClass() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Emission
-
Determine if the EmsClass is configured.
- isSetEmsClass() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigEmission
-
Determine if the EmsClass is configured.
- isSetEmsClass() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the EmsClass is configured.
- isSetEmsClass() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the EmsClass is configured.
- isSetEndpointID() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Determine if the EndpointID is configured.
- isSetEndpointLocation() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Determine if the EndpointLocation is configured.
- isSetEntryBy() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the EntryBy is configured.
- isSetEntryByRole() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the entryByRole field is configured.
- isSetEntryDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the EntryDateTime is configured.
- isSetEqpFnct() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
Determine if the EqpFnct is configured.
- isSetERPActualMax() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ERPActualMax is configured.
- isSetERPActualMin() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ERPActualMin is configured.
- isSetERPAdaptiveDriverDesc() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ERPAdaptiveDriverDesc is configured.
- isSetERPAdaptiveRuleDesc() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ERPAdaptiveRuleDesc is configured.
- isSetERPChangeRate() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ERPChangeRate is configured.
- isSetERPDwell() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPValues
-
Determine if the ERPDwell is configured.
- isSetERPExtremeMax() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ERPExtremeMax is configured.
- isSetERPExtremeMin() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ERPExtremeMin is configured.
- isSetERPMean() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ERPMean is configured.
- isSetERPMedian() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ERPMedian is configured.
- isSetERPNumber() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the ERPNumber is configured.
- isSetERPPatternPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ERPPatternPeriod is configured.
- isSetERPPatternType() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ERPPatternType is configured.
- isSetERPSequenceDesc() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ERPSequenceDesc is configured.
- isSetERPStdDev() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ERPStdDev is configured.
- isSetERPStep() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ERPStep is configured.
- isSetERPValue() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPValues
-
Determine if the ERPValue is configured.
- isSetEstimatedExpansionCost() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the EstimatedExpansionCost is configured.
- isSetEvaluation() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the Evaluation is configured.
- isSetExBlankingOn() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the ExBlankingOn is configured.
- isSetExcluded() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Determine if the Excluded is configured.
- isSetExcluded() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Determine if the Excluded is configured.
- isSetExcluded() - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Determine if the Excluded is configured.
- isSetExcluded() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.StageLocation
-
Determine if the Excluded is configured.
- isSetExcluded() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Determine if the Excluded is configured.
- isSetExclusive() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Determine if the Exclusive is configured.
- isSetExpansionTargetDate() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the ExpansionTargetDate is configured.
- isSetExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Determine if the ExpirationDate is configured.
- isSetExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Determine if the ExpirationDate is configured.
- isSetExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the ExpirationDate is configured.
- isSetExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Determine if the ExpirationDate is configured.
- isSetExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Determine if the ExpirationDate is configured.
- isSetExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Determine if the ExpirationDate is configured.
- isSetExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the ExpirationDate is configured.
- isSetExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Determine if the ExpirationDate is configured.
- isSetExpirationDate() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Determine if the ExpirationDate is configured.
- isSetExpirationDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the ExpirationDateTime is configured.
- isSetExpirationDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Determine if the ExpirationDateTime is configured.
- isSetExplainInformationTypeX() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Determine if the ExplainInformationTypeX is configured.
- isSetExplainModulationTypeX() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Determine if the ExplainModulationTypeX is configured.
- isSetExplainNatureOfSignalX() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Determine if the ExplainNatureOfSignalX is configured.
- isSetExternalReference() - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
Determine if the externalReference field is configured.
- isSetExternalReference() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the ExternalReference is configured.
- isSetExtReferenceRef() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the ExtReferenceRef is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Determine if the ExtReferences is configured.
- isSetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Determine if the ExtReferences is configured.
- isSetFallTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the FallTime is configured.
- isSetFallTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the FallTime is configured.
- isSetFASNumber() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the FASNumber is configured.
- isSetFax() - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Determine if the Fax is configured.
- isSetFCCAcceptanceNum() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Determine if the FCCAcceptanceNum is configured.
- isSetFCCAcceptanceNum() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the FCCAcceptanceNum is configured.
- isSetFCCFileNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the FCCFileNum is configured.
- isSetFEDeployment() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the FEDeployment is configured.
- isSetFeedlineLength() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the FeedlineLength is configured.
- isSetFeedlineLoss() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the FeedlineLoss is configured.
- isSetFeedOrientation() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Determine if the FeedOrientation is configured.
- isSetFeedType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Determine if the FeedType is configured.
- isSetFERef() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the FERef is configured.
- isSetFFTType() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the FFTType is configured.
- isSetFieldedStatus() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Determine if the FieldedStatus is configured.
- isSetFilter() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the Filter is configured.
- isSetFirstName() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Determine if the FirstName is configured.
- isSetFMDeviationCode() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the FMDeviationCode is configured.
- isSetFMPeakFreqDev() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the FMPeakFreqDev is configured.
- isSetFMPeakModulationIdx() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the FMPeakModulationIdx is configured.
- isSetFMRMSFreqDev() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the FMRMSFreqDev is configured.
- isSetFMSCNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the FMSCNum is configured.
- isSetFootnote() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Determine if the Footnote is configured.
- isSetFootnotes() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Determine if the Footnotes is configured.
- isSetFootnotes() - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Determine if the Footnotes is configured.
- isSetFootnoteType() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Determine if the FootnoteType is configured.
- isSetForceElement() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the forceElement field is configured.
- isSetForceElement() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the ForceElement is configured.
- isSetFreq() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Determine if the Freq is configured.
- isSetFreq() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.VSWR
-
Determine if the Freq is configured.
- isSetFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Determine if the Freq is configured.
- isSetFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Determine if the Freq is configured.
- isSetFreq() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Determine if the Freq is configured.
- isSetFreqBand() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Determine if the FreqBand is configured.
- isSetFreqBlocking() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the FreqBlocking is configured.
- isSetFreqConst() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Determine if the FreqConst is configured.
- isSetFreqConversion() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the FreqConversion is configured.
- isSetFreqFactor() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Determine if the FreqFactor is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntEfficiency
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Determine if the FreqMax is configured.
- isSetFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Determine if the FreqMax is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntEfficiency
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Determine if the FreqMin is configured.
- isSetFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Determine if the FreqMin is configured.
- isSetFreqOffset() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Determine if the FreqOffset is configured.
- isSetFreqOld() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Determine if the FreqOld is configured.
- isSetFreqRest() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Determine if the FreqRest is configured.
- isSetFreqSep() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Determine if the FreqSep is configured.
- isSetFreqSepType() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Determine if the FreqSepType is configured.
- isSetFreqTolerance() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the FreqTolerance is configured.
- isSetFreqTolerance() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the FreqTolerance is configured.
- isSetFreqToleranceUnit() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the FreqToleranceUnit is configured.
- isSetFreqToleranceUnit() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the FreqToleranceUnit is configured.
- isSetFrequencyActionOfficer() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the FrequencyActionOfficer is configured.
- isSetFreqUse() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Determine if the FreqUse is configured.
- isSetFreqUse() - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Determine if the FreqUse is configured.
- isSetFreqUse() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the FreqUse is configured.
- isSetFrontToBackRatio() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Determine if the FrontToBackRatio is configured.
- isSetFunction() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Determine if the Function is configured.
- isSetGain() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Determine if the Gain is configured.
- isSetGain() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPatternPoint
-
Determine if the Gain is configured.
- isSetGeneric() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the Generic is configured.
- isSetGeneric() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Determine if the Generic is configured.
- isSetGeneric() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the Generic is configured.
- isSetGeoAltitude() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the GeoAltitude is configured.
- isSetGeoDescription() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Determine if the GeoDescription is configured.
- isSetGeoNominalLon() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the GeoNominalLon is configured.
- isSetGPSAffected() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the GPSAffected is configured.
- isSetGpsNBL1Level() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the GpsNBL1Level is configured.
- isSetGpsNBL2Level() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the GpsNBL2Level is configured.
- isSetGpsWBL1Level() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the GpsWBL1Level is configured.
- isSetGpsWBL2Level() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the GpsWBL2Level is configured.
- isSetGuardBand() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the GuardBand is configured.
- isSetHelpRequired() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the HelpRequired is configured.
- isSetHopDwell() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the HopDwell is configured.
- isSetHopRate() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the HopRate is configured.
- isSetHorzAperture() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the HorzAperture is configured.
- isSetHorzBwMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the HorzBwMax is configured.
- isSetHorzBwMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Determine if the HorzBwMax is configured.
- isSetHorzBwMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the HorzBwMin is configured.
- isSetHorzBwMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Determine if the HorzBwMin is configured.
- isSetHorzDimension() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the HorzDimension is configured.
- isSetHorzScanRate() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the HorzScanRate is configured.
- isSetHorzScanSector() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the HorzScanSector is configured.
- isSetHorzScanSpeed() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the HorzScanSpeed is configured.
- isSetHorzScanType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the HorzScanType is configured.
- isSetHorzSidelobeAttenuation() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the HorzSidelobeAttenuation is configured.
- isSetHorzSidelobeAz() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the HorzSidelobeAz is configured.
- isSetHorzSidelobeSuppressed() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the HorzSidelobeSuppressed is configured.
- isSetHostComments() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CoordinationData
-
Determine if the HostComments is configured.
- isSetHostDocketNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the HostDocketNum is configured.
- isSetHostNation() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the HostNation is configured.
- isSetHours() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Hours is configured.
- isSetHours() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the Hours is configured.
- isSetHours() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Determine if the Hours is configured.
- isSetHours() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the Hours is configured.
- isSetIconPosLeft() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Determine if the IconPosLeft is configured.
- isSetIconPosTop() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Determine if the IconPosTop is configured.
- isSetIconType() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Determine if the IconType is configured.
- isSetIdentifier() - Method in class us.gov.dod.standard.ssrf._3_1.common.CaseNum
-
Determine if the Identifier is configured.
- isSetIdentifier() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Determine if the Identifier is configured.
- isSetIdentifier() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Determine if the Identifier is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Determine if the Idref is configured.
- isSetIdref() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Determine if the Idref is configured.
- isSetIdx() - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
Determine if the Idx is configured.
- isSetIdx() - Method in class us.gov.dod.standard.ssrf._3_1.common.Remarks
-
Determine if the Idx is configured.
- isSetIdx() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Determine if the Idx is configured.
- isSetIdx() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Determine if the Idx is configured.
- isSetIdx() - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Determine if the Idx is configured.
- isSetIdx() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Determine if the Idx is configured.
- isSetIdx() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Determine if the Idx is configured.
- isSetIdx() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Determine if the Idx is configured.
- isSetIdx() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Determine if the Idx is configured.
- isSetIFMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Determine if the IFMax is configured.
- isSetIFMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Determine if the IFMin is configured.
- isSetImageRejection() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the ImageRejection is configured.
- isSetInBand() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Determine if the InBand is configured.
- isSetInfoDataRate() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the InfoDataRate is configured.
- isSetInfoTransferRequirement() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the InfoTransferRequirement is configured.
- isSetInitialCost() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Determine if the InitialCost is configured.
- isSetInitialCost() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the InitialCost is configured.
- isSetInitialCostDesc() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the InitialCostDesc is configured.
- isSetInstallation() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Determine if the Installation is configured.
- isSetInstantRFBW03() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the InstantRFBW03 is configured.
- isSetInstantRFBW06() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the InstantRFBW06 is configured.
- isSetInstantRFBW10() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the InstantRFBW10 is configured.
- isSetInstantRFBW20() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the InstantRFBW20 is configured.
- isSetIntermediateFunction() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Determine if the IntermediateFunction is configured.
- isSetIntermodEffect() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the IntermodEffect is configured.
- isSetIntermodEffect() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the IntermodEffect is configured.
- isSetIntermodPct() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the IntermodPct is configured.
- isSetIntermodPct() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the IntermodPct is configured.
- isSetIntermodRejection() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the IntermodRejection is configured.
- isSetInternationalDesignator() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the InternationalDesignator is configured.
- isSetIntfDescr() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the IntfDescr is configured.
- isSetIntfPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the IntfPeriod is configured.
- isSetIntfReport() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the IntfReport is configured.
- isSetIntfStartDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the IntfStartDateTime is configured.
- isSetIntfStopDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the IntfStopDateTime is configured.
- isSetIRACNumber() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the IRACNumber is configured.
- isSetIsAttached() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Determine if the IsAttached is configured.
- isSetIsClassified() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Determine if the IsClassified is configured.
- isSetIsRelinquished() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Determine if the IsRelinquished is configured.
- isSetITURegComments() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Determine if the ITURegComments is configured.
- isSetITURegDate() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Determine if the ITURegDate is configured.
- isSetITURegNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Determine if the ITURegNum is configured.
- isSetITURegStatus() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Determine if the ITURegStatus is configured.
- isSetITUWaiver() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the ITUWaiver is configured.
- isSetJ12Number() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Determine if the J12Number is configured.
- isSetJammingAuthority() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Determine if the JammingAuthority is configured.
- isSetJammingChannelProfile() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Determine if the JammingChannelProfile is configured.
- isSetJammingPerformance() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the JammingPerformance is configured.
- isSetJammingPlan() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Determine if the JammingPlan is configured.
- isSetJammingTarget() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the JammingTarget is configured.
- isSetJCACallSign() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Determine if the JCACallSign is configured.
- isSetJCAFreq() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Determine if the JCAFreq is configured.
- isSetJCALevel() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Determine if the JCALevel is configured.
- isSetJCALevel() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Determine if the JCALevel is configured.
- isSetJCAState() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Determine if the JCAState is configured.
- isSetJitterCapable() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the JitterCapable is configured.
- isSetJobTitle() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Determine if the JobTitle is configured.
- isSetJRFL() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the JRFL is configured.
- isSetJRFLEntry() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Determine if the JRFLEntry is configured.
- isSetJRFLEntryLocation() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the JRFLEntryLocation is configured.
- isSetJustification() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the Justification is configured.
- isSetJustifyShortRiseTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the JustifyShortRiseTime is configured.
- isSetKeyLoadProcedure() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Determine if the KeyLoadProcedure is configured.
- isSetKeysAngle() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the KeysAngle is configured.
- isSetKeysDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the KeysDesc is configured.
- isSetLastChangeBy() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the LastChangeBy is configured.
- isSetLastChangeByRole() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the lastChangeByRole field is configured.
- isSetLastChangeDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the LastChangeDateTime is configured.
- isSetLastName() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Determine if the LastName is configured.
- isSetLastObservedBy() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the LastObservedBy is configured.
- isSetLastObservedBy() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the LastObservedBy is configured.
- isSetLastReviewBy() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the LastReviewBy is configured.
- isSetLastReviewByRole() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the lastReviewByRole field is configured.
- isSetLastReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the LastReviewDate is configured.
- isSetLastReviewedBy() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the LastReviewedBy is configured.
- isSetLastReviewedDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the LastReviewedDateTime is configured.
- isSetLat() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Determine if the Lat is configured.
- isSetLat() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Determine if the Lat is configured.
- isSetLat() - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Determine if the Lat is configured.
- isSetLat() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the Lat is configured.
- isSetLaunchDate() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the LaunchDate is configured.
- isSetLaunchLoc() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the launchLoc field is configured.
- isSetLaunchLocRef() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the LaunchLocRef is configured.
- isSetLaunchStatus() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the LaunchStatus is configured.
- isSetLeadType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Determine if the LeadType is configured.
- isSetLegacyNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Determine if the LegacyNum is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Determine if the LegacyReleasability is configured.
- isSetLegacyReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Determine if the LegacyReleasability is configured.
- isSetLevel() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Determine if the Level is configured.
- isSetLevel() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.CurvePoint
-
Determine if the Level is configured.
- isSetLevel3Auth() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the Level3Auth is configured.
- isSetLineCoding() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Determine if the LineCoding is configured.
- isSetLink() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Link is configured.
- isSetLinkID() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Determine if the LinkID is configured.
- isSetLinkName() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Determine if the LinkName is configured.
- isSetListSerialNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the ListSerialNum is configured.
- isSetLoadset() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the loadset field is configured.
- isSetLoadset() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the loadset field is configured.
- isSetLoadset() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the Loadset is configured.
- isSetLoadsetRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the LoadsetRef is configured.
- isSetLoadsetRef() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the LoadsetRef is configured.
- isSetLobeID() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Determine if the LobeID is configured.
- isSetLobeName() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Determine if the LobeName is configured.
- isSetLobeSymmetric() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Determine if the LobeSymmetric is configured.
- isSetLobeValueAngleAccuracy() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Determine if the LobeValueAngleAccuracy is configured.
- isSetLobeValueAngleHorz() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Determine if the LobeValueAngleHorz is configured.
- isSetLobeValueAngleVert() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Determine if the LobeValueAngleVert is configured.
- isSetLobeValueID() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Determine if the LobeValueID is configured.
- isSetLobeValueLevel() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Determine if the LobeValueLevel is configured.
- isSetLobeValueLevelAccuracy() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Determine if the LobeValueLevelAccuracy is configured.
- isSetLobeValueName() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Determine if the LobeValueName is configured.
- isSetLocalEventID() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the LocalEventID is configured.
- isSetLocation() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Determine if the location field is configured.
- isSetLocation() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the location field is configured.
- isSetLocation() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntryLocation
-
Determine if the location field is configured.
- isSetLocation() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the location field is configured.
- isSetLocation() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Determine if the location field is configured.
- isSetLocation() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the location field is configured.
- isSetLocation() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
Determine if the location field is configured.
- isSetLocation() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the Location is configured.
- isSetLocationExcluded() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Determine if the LocationExcluded is configured.
- isSetLocationRadius() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Determine if the LocationRadius is configured.
- isSetLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Determine if the LocationRef is configured.
- isSetLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the LocationRef is configured.
- isSetLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the LocationRef is configured.
- isSetLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Determine if the LocationRef is configured.
- isSetLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the LocationRef is configured.
- isSetLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
Determine if the LocationRef is configured.
- isSetLocationRestriction() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Determine if the locationRestriction field is configured.
- isSetLocationRestrictionRef() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Determine if the LocationRestriction is configured.
- isSetLocSat() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Determine if the locSat field is configured.
- isSetLocSat() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.StageLocation
-
Determine if the locSat field is configured.
- isSetLocSat() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Determine if the locSat field is configured.
- isSetLocSatRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Determine if the LocSatRef is configured.
- isSetLocSatRef() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.StageLocation
-
Determine if the LocSatRef is configured.
- isSetLocSatRef() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Determine if the LocSatRef is configured.
- isSetLOFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Determine if the LOFreqMax is configured.
- isSetLOFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Determine if the LOFreqMin is configured.
- isSetLon() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Determine if the Lon is configured.
- isSetLon() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Determine if the Lon is configured.
- isSetLon() - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Determine if the Lon is configured.
- isSetLon() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the Lon is configured.
- isSetLowestUsableChannel() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Determine if the LowestUsableChannel is configured.
- isSetMajorFunction() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Determine if the MajorFunction is configured.
- isSetManufacturer() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Determine if the Manufacturer is configured.
- isSetMaxActiveFrames() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Determine if the MaxActiveFrames is configured.
- isSetMaxBitRate() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Determine if the MaxBitRate is configured.
- isSetMaxCls() - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Determine if the MaxCls is configured.
- isSetMaxCls() - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Determine if the MaxCls is configured.
- isSetMaxDevRatio() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the MaxDevRatio is configured.
- isSetMaxGain() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the MaxGain is configured.
- isSetMaxPower() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the MaxPower is configured.
- isSetMaxReactiveFrames() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Determine if the MaxReactiveFrames is configured.
- isSetMessage() - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Determine if the message field is configured.
- isSetMessage() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the Message is configured.
- isSetMessageRef() - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Determine if the MessageRef is configured.
- isSetMinPointAngle() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Determine if the MinPointAngle is configured.
- isSetMinSeparation() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Determine if the MinSeparation is configured.
- isSetMinutes() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Minutes is configured.
- isSetMinutes() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the Minutes is configured.
- isSetMinutes() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Determine if the Minutes is configured.
- isSetMinutes() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the Minutes is configured.
- isSetMissing() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Determine if the missing field is configured.
- isSetMissingRef() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Determine if the MissingRef is configured.
- isSetMission() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Determine if the Mission is configured.
- isSetMissionCode() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the MissionCode is configured.
- isSetModAllowedBy() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the ModAllowedBy is configured.
- isSetModAllowedByRole() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the modAllowedByRole field is configured.
- isSetModeID() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the ModeID is configured.
- isSetModeID() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
Determine if the ModeID is configured.
- isSetModeID() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxModeRef
-
Determine if the ModeID is configured.
- isSetModeID() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the ModeID is configured.
- isSetModeID() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the ModeID is configured.
- isSetModeName() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the ModeName is configured.
- isSetModeName() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the ModeName is configured.
- isSetModeName() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the ModeName is configured.
- isSetModeUse() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the ModeUse is configured.
- isSetModFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Determine if the ModFreqMax is configured.
- isSetModFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Determine if the ModFreqMin is configured.
- isSetModulationType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the ModulationType is configured.
- isSetMonths() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Months is configured.
- isSetMonths() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the Months is configured.
- isSetMonths() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Determine if the Months is configured.
- isSetMonths() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the Months is configured.
- isSetMOPAdaptiveDriverDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPAdaptiveDriverDesc is configured.
- isSetMOPAdaptiveDriverRuleDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPAdaptiveDriverRuleDesc is configured.
- isSetMOPAMPercentModulation() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPAMPercentModulation is configured.
- isSetMOPChangeRateAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPChangeRateAM is configured.
- isSetMOPChangeRateCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPChangeRateCW is configured.
- isSetMOPChangeRateFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPChangeRateFM is configured.
- isSetMOPChangeRatePM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPChangeRatePM is configured.
- isSetMOPContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPContinuous is configured.
- isSetMOPDutyCycle() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Determine if the MOPDutyCycle is configured.
- isSetMOPDutyCycle() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Determine if the MOPDutyCycle is configured.
- isSetMOPDutyCycle() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Determine if the MOPDutyCycle is configured.
- isSetMOPFlyBackInterval() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Determine if the MOPFlyBackInterval is configured.
- isSetMOPID() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPID is configured.
- isSetMOPMeanValueAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPMeanValueAM is configured.
- isSetMOPMeanValueCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPMeanValueCW is configured.
- isSetMOPMeanValueFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPMeanValueFM is configured.
- isSetMOPMeanValuePM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPMeanValuePM is configured.
- isSetMOPNumElements() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPNumElements is configured.
- isSetMOPNumElements() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Determine if the MOPNumElements is configured.
- isSetMOPNumElements() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Determine if the MOPNumElements is configured.
- isSetMOPNumElements() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Determine if the MOPNumElements is configured.
- isSetMOPOffTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPOffTime is configured.
- isSetMOPOnTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPOnTime is configured.
- isSetMOPPatternName() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPPatternName is configured.
- isSetMOPPatternPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPPatternPeriod is configured.
- isSetMOPPatternType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPPatternType is configured.
- isSetMOPPulseDurationLink() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPPulseDurationLink is configured.
- isSetMOPRepetionInterval() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Determine if the MOPRepetionInterval is configured.
- isSetMOPRepetionInterval() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Determine if the MOPRepetionInterval is configured.
- isSetMOPRepetionInterval() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Determine if the MOPRepetionInterval is configured.
- isSetMOPSequenceDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Determine if the MOPSequenceDesc is configured.
- isSetMOPStepAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Determine if the MOPStepAM is configured.
- isSetMOPStepAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Determine if the MOPStepAM is configured.
- isSetMOPStepAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Determine if the MOPStepAM is configured.
- isSetMOPStepCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Determine if the MOPStepCW is configured.
- isSetMOPStepCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Determine if the MOPStepCW is configured.
- isSetMOPStepCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Determine if the MOPStepCW is configured.
- isSetMOPStepFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Determine if the MOPStepFM is configured.
- isSetMOPStepFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Determine if the MOPStepFM is configured.
- isSetMOPStepFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Determine if the MOPStepFM is configured.
- isSetMOPStepPM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Determine if the MOPStepPM is configured.
- isSetMOPStepPM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Determine if the MOPStepPM is configured.
- isSetMOPStepPM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Determine if the MOPStepPM is configured.
- isSetMOPSweepPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Determine if the MOPSweepPeriod is configured.
- isSetMOPTimeBWProduct() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPTimeBWProduct is configured.
- isSetMOPType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPType is configured.
- isSetMOPValueAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Determine if the MOPValueAM is configured.
- isSetMOPValueCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Determine if the MOPValueCW is configured.
- isSetMOPValueFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Determine if the MOPValueFM is configured.
- isSetMOPValueMaxAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPValueMaxAM is configured.
- isSetMOPValueMaxCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPValueMaxCW is configured.
- isSetMOPValueMaxFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPValueMaxFM is configured.
- isSetMOPValueMaxPM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPValueMaxPM is configured.
- isSetMOPValueMinAM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPValueMinAM is configured.
- isSetMOPValueMinCW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPValueMinCW is configured.
- isSetMOPValueMinFM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPValueMinFM is configured.
- isSetMOPValueMinPM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the MOPValueMinPM is configured.
- isSetMOPValuePM() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Determine if the MOPValuePM is configured.
- isSetMotionType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the MotionType is configured.
- isSetMUXLevel() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the MUXLevel is configured.
- isSetMUXScheme() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the MUXScheme is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Project
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Manufacturer
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.ChannelPlan
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Determine if the Name is configured.
- isSetName() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Determine if the Name is configured.
- isSetNarrowBandPlanning() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Determine if the NarrowBandPlanning is configured.
- isSetNATOPooledFrequencyCode() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the NATOPooledFrequencyCode is configured.
- isSetNATOPooledFrequencyNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the NATOPooledFrequencyNum is configured.
- isSetNavAidsChannel() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Determine if the NavAidsChannel is configured.
- isSetNBFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.NarrowBandPlanning
-
Determine if the NBFreq is configured.
- isSetNecessaryBw() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Emission
-
Determine if the NecessaryBw is configured.
- isSetNecessaryBw() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the NecessaryBw is configured.
- isSetNecessaryBw() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the NecessaryBw is configured.
- isSetNecessaryBwMax() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigEmission
-
Determine if the NecessaryBwMax is configured.
- isSetNecessaryBwMin() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigEmission
-
Determine if the NecessaryBwMin is configured.
- isSetNetCircuitsAffected() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the NetCircuitsAffected is configured.
- isSetNetNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Determine if the NetNum is configured.
- isSetNetsAffected() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the NetsAffected is configured.
- isSetNetworkName() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the NetworkName is configured.
- isSetNoiseFigure() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the NoiseFigure is configured.
- isSetNoiseTemp() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the NoiseTemp is configured.
- isSetNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the Nomenclature is configured.
- isSetNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the Nomenclature is configured.
- isSetNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Determine if the Nomenclature is configured.
- isSetNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Determine if the Nomenclature is configured.
- isSetNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the Nomenclature is configured.
- isSetNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the Nomenclature is configured.
- isSetNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the Nomenclature is configured.
- isSetNonGeoApogee() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the NonGeoApogee is configured.
- isSetNonGeoInclination() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the NonGeoInclination is configured.
- isSetNonGeoNumSatellites() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the NonGeoNumSatellites is configured.
- isSetNonGeoPerigee() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the NonGeoPerigee is configured.
- isSetNonGeoPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the NonGeoPeriod is configured.
- isSetNotation() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the Notation is configured.
- isSetNotationTimeline() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Determine if the NotationTimeline is configured.
- isSetNote() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.RecordNote
-
Determine if the note field is configured.
- isSetNote() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the Note is configured.
- isSetNoteRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.RecordNote
-
Determine if the NoteRef is configured.
- isSetNSEPUse() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the NSEPUse is configured.
- isSetNTIACoordinationRequired() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the NTIACoordinationRequired is configured.
- isSetNTIASpaceData() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the NTIASpaceData is configured.
- isSetNum() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the Num is configured.
- isSetNumAreaUnits() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the NumAreaUnits is configured.
- isSetNumAreaUnits() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the NumAreaUnits is configured.
- isSetNumBeamPositionsPerScan() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the NumBeamPositionsPerScan is configured.
- isSetNumBeamPositionsTotal() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the NumBeamPositionsTotal is configured.
- isSetNumBeamsPerRaster() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the NumBeamsPerRaster is configured.
- isSetNumber() - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Determine if the Number is configured.
- isSetNumCositedUnits() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the NumCositedUnits is configured.
- isSetNumCositedUnits() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the NumCositedUnits is configured.
- isSetNumEquip() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Determine if the NumEquip is configured.
- isSetNumFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Determine if the NumFreq is configured.
- isSetNumFreqs() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the NumFreqs is configured.
- isSetNumFreqsPerHopset() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the NumFreqsPerHopset is configured.
- isSetNumFreqsRequired() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the NumFreqsRequired is configured.
- isSetNumHopsets() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the NumHopsets is configured.
- isSetNumMobileUnits() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the NumMobileUnits is configured.
- isSetNumMobileUnits() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the NumMobileUnits is configured.
- isSetNumObsPositions() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the NumObsPositions is configured.
- isSetNumObsValues() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the NumObsValues is configured.
- isSetNumPDPositions() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the NumPDPositions is configured.
- isSetNumPDValues() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the NumPDValues is configured.
- isSetNumPresetChannels() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Determine if the NumPresetChannels is configured.
- isSetNumPresetChannels() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Determine if the NumPresetChannels is configured.
- isSetNumPRIElements() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the NumPRIElements is configured.
- isSetNumPRIPositions() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the NumPRIPositions is configured.
- isSetNumRastersPerCycle() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the NumRastersPerCycle is configured.
- isSetNumRepeaters() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the NumRepeaters is configured.
- isSetNumRFChannels() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the NumRFChannels is configured.
- isSetNumRFElements() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the NumRFElements is configured.
- isSetNumRFPositions() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the NumRFPositions is configured.
- isSetNumRFSimultaneous() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the NumRFSimultaneous is configured.
- isSetNumScanPositions() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the NumScanPositions is configured.
- isSetNumScanValues() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the NumScanValues is configured.
- isSetNumSideTones() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the NumSideTones is configured.
- isSetNumStates() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Determine if the NumStates is configured.
- isSetNumStations() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.SysOfStation
-
Determine if the NumStations is configured.
- isSetNumSubCarriers() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the NumSubCarriers is configured.
- isSetNumSubpulses() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the NumSubpulses is configured.
- isSetNumSystems() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the NumSystems is configured.
- isSetNumTiltAngleElements() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the NumTiltAngleElements is configured.
- isSetNumTiltAnglePositions() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the NumTiltAnglePositions is configured.
- isSetNumUsers() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the NumUsers is configured.
- isSetNumUsers() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the NumUsers is configured.
- isSetObjectNum() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the ObjectNum is configured.
- isSetObservedERPAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the ObservedERPAnalysis is configured.
- isSetObservedERPValues() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Determine if the ObservedERPValues is configured.
- isSetObservedFirstDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the ObservedFirstDateTime is configured.
- isSetObservedFirstDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the ObservedFirstDateTime is configured.
- isSetObservedLastDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the ObservedLastDateTime is configured.
- isSetObservedLastDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the ObservedLastDateTime is configured.
- isSetObservedLobeAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the ObservedLobeAnalysis is configured.
- isSetObservedLobeValues() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Determine if the ObservedLobeValues is configured.
- isSetObservedMOPAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the ObservedMOPAnalysis is configured.
- isSetObservedMOPBits() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Determine if the ObservedMOPBits is configured.
- isSetObservedMOPSequence() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Determine if the ObservedMOPSequence is configured.
- isSetObservedMOPSweep() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the ObservedMOPSweep is configured.
- isSetObservedMOPValues() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Determine if the ObservedMOPValues is configured.
- isSetObservedPDValue() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Determine if the ObservedPDValue is configured.
- isSetObservedPolarisationAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the ObservedPolarisationAnalysis is configured.
- isSetObservedPolarisationValues() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the ObservedPolarisationValues is configured.
- isSetObservedPRFValue() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Determine if the ObservedPRFValue is configured.
- isSetObservedPRIValue() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Determine if the ObservedPRIValue is configured.
- isSetObservedPulseAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the ObservedPulseAnalysis is configured.
- isSetObservedPulseValues() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the ObservedPulseValues is configured.
- isSetObservedRFAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the ObservedRFAnalysis is configured.
- isSetObservedRFValues() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the ObservedRFValues is configured.
- isSetObservedScanAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the ObservedScanAnalysis is configured.
- isSetObservedScanValues() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ObservedScanValues is configured.
- isSetObserveTime() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the ObserveTime is configured.
- isSetOccBw() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the OccBw is configured.
- isSetOccBwCalculated() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the OccBwCalculated is configured.
- isSetOffset() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.CurvePoint
-
Determine if the Offset is configured.
- isSetOffsetFreq() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the OffsetFreq is configured.
- isSetOffTheShelfEquipment() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the OffTheShelfEquipment is configured.
- isSetOOBJustification() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the OOBJustification is configured.
- isSetOOKPattern() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Determine if the OOKPattern is configured.
- isSetOperationalRFBW() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the OperationalRFBW is configured.
- isSetOperInvIntent() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the OperInvIntent is configured.
- isSetOrbitType() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the OrbitType is configured.
- isSetOrg() - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Determine if the Org is configured.
- isSetOrganisation() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Determine if the Organisation is configured.
- isSetOrganisation() - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
Determine if the organisation field is configured.
- isSetOrganisation() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the Organisation is configured.
- isSetOrigin() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Determine if the Origin is configured.
- isSetOriginalAssignmentDate() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the OriginalAssignmentDate is configured.
- isSetOriginatingAgency() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the OriginatingAgency is configured.
- isSetOscillatorTuning() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Determine if the OscillatorTuning is configured.
- isSetOtherHarmonicLevel() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the OtherHarmonicLevel is configured.
- isSetOutputDevice() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the OutputDevice is configured.
- isSetOutputDeviceType() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the OutputDeviceType is configured.
- isSetOwner() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the Owner is configured.
- isSetOwnerOrg() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
Determine if the ownerOrg field is configured.
- isSetOwnerOrgRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
Determine if the OwnerOrgRef is configured.
- isSetOwnerRole() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the ownerRole field is configured.
- isSetOwnerType() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
Determine if the OwnerType is configured.
- isSetOwningCountry() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the OwningCountry is configured.
- isSetOwningOrganisation() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the owningOrganisation field is configured.
- isSetOwningOrganisationRef() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the OwningOrganisation is configured.
- isSetPairedASN() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Determine if the PairedASN is configured.
- isSetPairedFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Determine if the PairedFreq is configured.
- isSetPairedFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Determine if the PairedFreqMin is configured.
- isSetPairedType() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Determine if the PairedType is configured.
- isSetPDAdaptiveRuleDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDAdaptiveRuleDesc is configured.
- isSetPDContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDContinuous is configured.
- isSetPDDwellMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDDwellMax is configured.
- isSetPDDwellMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDDwellMin is configured.
- isSetPDExtremeMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDExtremeMax is configured.
- isSetPDExtremeMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDExtremeMin is configured.
- isSetPDMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDMax is configured.
- isSetPDMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the PDMax is configured.
- isSetPDMean() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDMean is configured.
- isSetPDMedian() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDMedian is configured.
- isSetPDMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDMin is configured.
- isSetPDMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the PDMin is configured.
- isSetPDPatternPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDPatternPeriod is configured.
- isSetPDPatternType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDPatternType is configured.
- isSetPDSequenceDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDSequenceDesc is configured.
- isSetPDStdDev() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDStdDev is configured.
- isSetPDStep() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDStep is configured.
- isSetPDTypicalMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDTypicalMax is configured.
- isSetPDTypicalMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PDTypicalMin is configured.
- isSetPerformanceEffects() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the PerformanceEffects is configured.
- isSetPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Period is configured.
- isSetPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Determine if the Period is configured.
- isSetPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Determine if the Period is configured.
- isSetPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Time
-
Determine if the Period is configured.
- isSetPhArrayNumElements() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the PhArrayNumElements is configured.
- isSetPhArrayNumMainBeams() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the PhArrayNumMainBeams is configured.
- isSetPhysicalUsage() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Determine if the PhysicalUsage is configured.
- isSetPlatform() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the Platform is configured.
- isSetPoc() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
Determine if the poc field is configured.
- isSetPoc() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Determine if the poc field is configured.
- isSetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Determine if the POCInformation is configured.
- isSetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the POCInformation is configured.
- isSetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the POCInformation is configured.
- isSetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the POCInformation is configured.
- isSetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the POCInformation is configured.
- isSetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the POCInformation is configured.
- isSetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the POCInformation is configured.
- isSetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the POCInformation is configured.
- isSetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Determine if the POCInformation is configured.
- isSetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Determine if the POCInformation is configured.
- isSetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the POCInformation is configured.
- isSetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the POCInformation is configured.
- isSetPOCRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Determine if the POCRef is configured.
- isSetPoint() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the Point is configured.
- isSetPointingAzMax() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the PointingAzMax is configured.
- isSetPointingAzMin() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the PointingAzMin is configured.
- isSetPointingElevMax() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the PointingElevMax is configured.
- isSetPointingElevMin() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the PointingElevMin is configured.
- isSetPointToMultiPoint() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Determine if the PointToMultiPoint is configured.
- isSetPolarisationAngle() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the PolarisationAngle is configured.
- isSetPolarisationDirection() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the PolarisationDirection is configured.
- isSetPolarisationRotationRate() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the PolarisationRotationRate is configured.
- isSetPolarisationSense() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the PolarisationSense is configured.
- isSetPolarisationType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the PolarisationType is configured.
- isSetPolarisationType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the PolarisationType is configured.
- isSetPolarisationType() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the PolarisationType is configured.
- isSetPolygon() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the Polygon is configured.
- isSetPolygonPoint() - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Determine if the PolygonPoint is configured.
- isSetPortIsolation() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the PortIsolation is configured.
- isSetPostCode() - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Determine if the PostCode is configured.
- isSetPostCode() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the PostCode is configured.
- isSetPostDetectionFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the PostDetectionFreqMax is configured.
- isSetPostDetectionFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the PostDetectionFreqMin is configured.
- isSetPotentialVictims() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Determine if the PotentialVictims is configured.
- isSetPower() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Emission
-
Determine if the Power is configured.
- isSetPower() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the Power is configured.
- isSetPower() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the Power is configured.
- isSetPowerLimit() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the PowerLimit is configured.
- isSetPowerLimit() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxModeRef
-
Determine if the PowerLimit is configured.
- isSetPowerMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Determine if the PowerMax is configured.
- isSetPowerMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Determine if the PowerMin is configured.
- isSetPowerType() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the PowerType is configured.
- isSetPowerType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Determine if the PowerType is configured.
- isSetPreferred() - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Determine if the Preferred is configured.
- isSetPreferred() - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Determine if the Preferred is configured.
- isSetPreselectionType() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Determine if the PreselectionType is configured.
- isSetPreviousAuthorization() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the PreviousAuthorization is configured.
- isSetPreviousSPSDocketNum() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the PreviousSPSDocketNum is configured.
- isSetPRFChangeRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRFChangeRate is configured.
- isSetPRFExtremeMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRFExtremeMax is configured.
- isSetPRFExtremeMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRFExtremeMin is configured.
- isSetPRFMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRFMax is configured.
- isSetPRFMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRFMin is configured.
- isSetPRFTypicalMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRFTypicalMax is configured.
- isSetPRFTypicalMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRFTypicalMin is configured.
- isSetPRIAdaptiveDriverDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIAdaptiveDriverDesc is configured.
- isSetPRIAdaptiveRuleDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIAdaptiveRuleDesc is configured.
- isSetPRIAnomalousValues() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIAnomalousValues is configured.
- isSetPRIBasicClockPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIBasicClockPeriod is configured.
- isSetPRIChangeRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIChangeRate is configured.
- isSetPRIContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIContinuous is configured.
- isSetPRICountdown() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRICountdown is configured.
- isSetPRICountdownKey() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRICountdownKey is configured.
- isSetPRIExtremeMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIExtremeMax is configured.
- isSetPRIExtremeMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIExtremeMin is configured.
- isSetPRIFramePeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIFramePeriod is configured.
- isSetPRIFrameRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIFrameRate is configured.
- isSetPRIGroupPulseSpacing() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIGroupPulseSpacing is configured.
- isSetPRIGroupSpacing() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIGroupSpacing is configured.
- isSetPrimaryFirmware() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Determine if the PrimaryFirmware is configured.
- isSetPrimaryStation() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the PrimaryStation is configured.
- isSetPrimaryStation() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the PrimaryStation is configured.
- isSetPRIMean() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIMean is configured.
- isSetPRIMedian() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIMedian is configured.
- isSetPRIMedianCountdowns() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIMedianCountdowns is configured.
- isSetPriority() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Determine if the Priority is configured.
- isSetPriority() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the Priority is configured.
- isSetPriority() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Determine if the Priority is configured.
- isSetPriority() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the Priority is configured.
- isSetPriority() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Determine if the Priority is configured.
- isSetPriority() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Determine if the Priority is configured.
- isSetPRIPatternPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIPatternPeriod is configured.
- isSetPRIPatternType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIPatternType is configured.
- isSetPRIPulsesPerGroup() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIPulsesPerGroup is configured.
- isSetPRISequenceDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRISequenceDesc is configured.
- isSetPRIStability() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIStability is configured.
- isSetPRIStabilitySamplePeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIStabilitySamplePeriod is configured.
- isSetPRIStdDev() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIStdDev is configured.
- isSetPRIStep() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRIStep is configured.
- isSetPRISubframePeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRISubframePeriod is configured.
- isSetPRISubframeRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRISubframeRate is configured.
- isSetPRITimingShift() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRITimingShift is configured.
- isSetPRITypicalMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRITypicalMax is configured.
- isSetPRITypicalMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the PRITypicalMin is configured.
- isSetProcessing() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Processing is configured.
- isSetProcessingGainMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the ProcessingGainMax is configured.
- isSetProcessingGainMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the ProcessingGainMin is configured.
- isSetProject() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Determine if the Project is configured.
- isSetProject() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Project is configured.
- isSetProject() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the Project is configured.
- isSetProject() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the Project is configured.
- isSetProject() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the Project is configured.
- isSetProperties() - Method in class us.gov.dod.standard.ssrf.SSRF
-
Inspect this SSRF instance to determine if the SSRF Properties field is
configured.
- isSetProtectionCode() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the ProtectionCode is configured.
- isSetPRRMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the PRRMax is configured.
- isSetPRRMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the PRRMin is configured.
- isSetPulse() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the Pulse is configured.
- isSetPulseChirpDurationMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the PulseChirpDurationMax is configured.
- isSetPulseChirpDurationMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the PulseChirpDurationMin is configured.
- isSetPulseChirpFreqShift() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the PulseChirpFreqShift is configured.
- isSetPulseChirpRate() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the PulseChirpRate is configured.
- isSetPulseFreqDev() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the PulseFreqDev is configured.
- isSetPulseWidth() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Determine if the PulseWidth is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Determine if the Quality is configured.
- isSetQuality() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Determine if the Quality is configured.
- isSetRadarProcessingGainMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the RadarProcessingGainMax is configured.
- isSetRadarType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the RadarType is configured.
- isSetRadiationPlan() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the RadiationPlan is configured.
- isSetRadioService() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
Determine if the RadioService is configured.
- isSetRanking() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Determine if the Ranking is configured.
- isSetRatio() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.VSWR
-
Determine if the Ratio is configured.
- isSetReason() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Determine if the Reason is configured.
- isSetReceiver() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Determine if the receiver field is configured.
- isSetReceiver() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the Receiver is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Determine if the RecommendedValue is configured.
- isSetRecommendedValue() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Determine if the RecommendedValue is configured.
- isSetRecordNote() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the RecordNote is configured.
- isSetRedacted() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the Redacted is configured.
- isSetReferencedStage() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Determine if the ReferencedStage is configured.
- isSetRefFreq() - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Determine if the RefFreq is configured.
- isSetRelated() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the related field is configured.
- isSetRelatedAnalysisAndTestData() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the RelatedAnalysisAndTestData is configured.
- isSetRelatedOrganisation() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Determine if the RelatedOrganisation is configured.
- isSetRelatedRef() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the RelatedRef is configured.
- isSetRelatedSupportability() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the RelatedSupportability is configured.
- isSetRelatedSystem() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Determine if the RelatedSystem is configured.
- isSetRelation() - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
Determine if the Relation is configured.
- isSetRelation() - Method in class us.gov.dod.standard.ssrf._3_1.rfsystem.RelatedSystem
-
Determine if the Relation is configured.
- isSetReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the Releasability is configured.
- isSetRelinquishmentDate() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Determine if the RelinquishmentDate is configured.
- isSetRemarkRef() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the RemarkRef is configured.
- isSetRemarkRef() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Get a list of Common/Remarks idx values applicable to the current data
item.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Determine if the Remarks is configured.
- isSetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Determine if the Remarks is configured.
- isSetRepeat() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Determine if the Repeat is configured.
- isSetRepeater() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the Repeater is configured.
- isSetReplacementInfo() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the ReplacementInfo is configured.
- isSetReplyingAuthority() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the ReplyingAuthority is configured.
- isSetReplyingCountry() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the ReplyingCountry is configured.
- isSetRequestedFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Determine if the RequestedFreq is configured.
- isSetRequestForExpansion() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the RequestForExpansion is configured.
- isSetRequestType() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the RequestType is configured.
- isSetRequired() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Determine if the Required is configured.
- isSetRequiredEffect() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the RequiredEffect is configured.
- isSetRequiredPerformance() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the RequiredPerformance is configured.
- isSetRequirement() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Determine if the Requirement is configured.
- isSetRequirement() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Requirement is configured.
- isSetRequirement() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the Requirement is configured.
- isSetResetProcedure() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Determine if the ResetProcedure is configured.
- isSetResourceLocator() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Determine if the ResourceLocator is configured.
- isSetRetireDate() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Determine if the RetireDate is configured.
- isSetReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Determine if the ReviewDate is configured.
- isSetReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the ReviewDate is configured.
- isSetReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Determine if the ReviewDate is configured.
- isSetReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the ReviewDate is configured.
- isSetReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Determine if the ReviewDate is configured.
- isSetReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the ReviewDate is configured.
- isSetReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Determine if the ReviewDate is configured.
- isSetReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Determine if the ReviewDate is configured.
- isSetReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the ReviewDate is configured.
- isSetReviewDate() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the ReviewDate is configured.
- isSetRFAdaptiveDriver() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFAdaptiveDriver is configured.
- isSetRFAdaptiveRule() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFAdaptiveRule is configured.
- isSetRFBasicClockPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFBasicClockPeriod is configured.
- isSetRFChangeRate() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFChangeRate is configured.
- isSetRFChannelFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFChannelFreqMax is configured.
- isSetRFChannelFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFChannelFreqMin is configured.
- isSetRFCoherent() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFCoherent is configured.
- isSetRFContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFContinuous is configured.
- isSetRFFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFFreqMax is configured.
- isSetRFFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFFreqMin is configured.
- isSetRFFreqTolerance() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFFreqTolerance is configured.
- isSetRFFreqToleranceInterval() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFFreqToleranceInterval is configured.
- isSetRFFreqToleranceUnit() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFFreqToleranceUnit is configured.
- isSetRFMean() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFMean is configured.
- isSetRFMedian() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFMedian is configured.
- isSetRFPatternPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFPatternPeriod is configured.
- isSetRFPatternType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFPatternType is configured.
- isSetRFRestFreq() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFRestFreq is configured.
- isSetRFSequenceDesc() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFSequenceDesc is configured.
- isSetRFSlotDuration() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFSlotDuration is configured.
- isSetRFStandardDeviation() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFStandardDeviation is configured.
- isSetRfSystem() - Method in class us.gov.dod.standard.ssrf._3_1.rfsystem.RelatedSystem
-
Determine if the rfSystem field is configured.
- isSetRFSystem() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the RFSystem is configured.
- isSetRFSystemRef() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the RFSystemRef is configured.
- isSetRFTuningStep() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the RFTuningStep is configured.
- isSetRFValue() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFValues
-
Determine if the RFValue is configured.
- isSetRiseTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Determine if the RiseTime is configured.
- isSetRiseTime() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Determine if the RiseTime is configured.
- isSetRole() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.UsingCountries
-
Determine if the Role is configured.
- isSetRole() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the Role is configured.
- isSetRole() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Determine if the role field is configured.
- isSetRole() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the Role is configured.
- isSetRoleRef() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Determine if the RoleRef is configured.
- isSetRotationDirection() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the RotationDirection is configured.
- isSetRotationRateMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the RotationRateMax is configured.
- isSetRotationRateMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the RotationRateMin is configured.
- isSetRoutineAgendaItem() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the RoutineAgendaItem is configured.
- isSetRxAntModeRef() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Determine if the RxAntModeRef is configured.
- isSetRxDuration() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the RxDuration is configured.
- isSetRxEndpointID() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramLine
-
Determine if the RxEndpointID is configured.
- isSetRxMode() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Determine if the RxMode is configured.
- isSetRxModeRef() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Determine if the RxModeRef is configured.
- isSetRxModulation() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the RxModulation is configured.
- isSetRxRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the RxRef is configured.
- isSetRxSignalTuning() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the RxSignalTuning is configured.
- isSetRxType() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the RxType is configured.
- isSetSATCOMPriority() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SATCOMPriority is configured.
- isSetSatellite() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the Satellite is configured.
- isSetSatelliteAffected() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SatelliteAffected is configured.
- isSetSatelliteChannel() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SatelliteChannel is configured.
- isSetSatelliteDownlinkPolarisation() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SatelliteDownlinkPolarisation is configured.
- isSetSatelliteHemisphere() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SatelliteHemisphere is configured.
- isSetSatelliteLongitude() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SatelliteLongitude is configured.
- isSetSatelliteName() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SatelliteName is configured.
- isSetSatelliteTransponderID() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SatelliteTransponderID is configured.
- isSetSatelliteUplinkFreq() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SatelliteUplinkFreq is configured.
- isSetSatelliteUplinkPolarisation() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SatelliteUplinkPolarisation is configured.
- isSetScanAdaptiveDriverDesc() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ScanAdaptiveDriverDesc is configured.
- isSetScanAdaptiveRuleDesc() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ScanAdaptiveRuleDesc is configured.
- isSetScanAngleAzStart() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ScanAngleAzStart is configured.
- isSetScanAngleAzStop() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ScanAngleAzStop is configured.
- isSetScanAngleElevStart() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ScanAngleElevStart is configured.
- isSetScanAngleElevStop() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ScanAngleElevStop is configured.
- isSetScanDwell() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ScanDwell is configured.
- isSetScanDwellSequence() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ScanDwellSequence is configured.
- isSetScanDwellTime() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ScanDwellTime is configured.
- isSetScanElevContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ScanElevContinuous is configured.
- isSetScanPatternType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ScanPatternType is configured.
- isSetScansHorzContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ScansHorzContinuous is configured.
- isSetScanType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Determine if the ScanType is configured.
- isSetScanValue() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanValues
-
Determine if the ScanValue is configured.
- isSetSecondaryDatasets() - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Determine if the SecondaryDatasets is configured.
- isSetSecondaryFirmware() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Determine if the SecondaryFirmware is configured.
- isSetSecondHarmonicLevel() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the SecondHarmonicLevel is configured.
- isSetSeconds() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Seconds is configured.
- isSetSeconds() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the Seconds is configured.
- isSetSeconds() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Determine if the Seconds is configured.
- isSetSeconds() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the Seconds is configured.
- isSetSectBlanking() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the SectBlanking is configured.
- isSetSecurityClass() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the SecurityClass is configured.
- isSetSemiMajorAxis() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Determine if the SemiMajorAxis is configured.
- isSetSemiMinorAxis() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Determine if the SemiMinorAxis is configured.
- isSetSensitivityCriteriaLevel() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the SensitivityCriteriaLevel is configured.
- isSetSensitivityCriteriaText() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the SensitivityCriteriaText is configured.
- isSetSensitivityCriteriaType() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the SensitivityCriteriaType is configured.
- isSetSensitivityLevel() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the SensitivityLevel is configured.
- isSetSeparateSystemJustification() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the SeparateSystemJustification is configured.
- isSetSequence() - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Determine if the Sequence is configured.
- isSetSequenceBitLength() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Determine if the SequenceBitLength is configured.
- isSetSerial() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Determine if the Serial is configured.
- isSetSerial() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
Determine if the Serial is configured.
- isSetSerial() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the Serial is configured.
- isSetSerial() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
Determine if the Serial is configured.
- isSetSerial() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntryLocation
-
Determine if the Serial is configured.
- isSetSerial() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
Determine if the Serial is configured.
- isSetSerial() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Determine if the Serial is configured.
- isSetSerial() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Determine if the Serial is configured.
- isSetSerial() - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
Determine if the Serial is configured.
- isSetSerial() - Method in class us.gov.dod.standard.ssrf._3_1.rfsystem.RelatedSystem
-
Determine if the Serial is configured.
- isSetServiceArea() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Determine if the ServiceArea is configured.
- isSetServiceVolumeHeight() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Determine if the ServiceVolumeHeight is configured.
- isSetServiceVolumeLocRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Determine if the ServiceVolumeLocRef is configured.
- isSetServiceVolumeRadius() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Determine if the ServiceVolumeRadius is configured.
- isSetShape() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the Shape is configured.
- isSetSidebandSuppressed() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the SidebandSuppressed is configured.
- isSetSidebandSuppression() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the SidebandSuppression is configured.
- isSetSignal() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the Signal is configured.
- isSetSignalDurationMax() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Determine if the SignalDurationMax is configured.
- isSetSignalDurationMin() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Determine if the SignalDurationMin is configured.
- isSetSignalSequenceDesc() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Determine if the SignalSequenceDesc is configured.
- isSetSignalShape() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Determine if the SignalShape is configured.
- isSetSignalType() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Determine if the SignalType is configured.
- isSetSignalType() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Determine if the SignalType is configured.
- isSetSiteElevation() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Determine if the SiteElevation is configured.
- isSetSoftware() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Determine if the Software is configured.
- isSetSolution() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the Solution is configured.
- isSetSource() - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Determine if the Source is configured.
- isSetSource() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Determine if the Source is configured.
- isSetSourceAz() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SourceAz is configured.
- isSetSourceClsDate() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Determine if the SourceClsDate is configured.
- isSetSourceEmsBw() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SourceEmsBw is configured.
- isSetSourceEmsClass() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SourceEmsClass is configured.
- isSetSourceFieldStrength() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SourceFieldStrength is configured.
- isSetSourceFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SourceFreqMax is configured.
- isSetSourceFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SourceFreqMin is configured.
- isSetSourceLat() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SourceLat is configured.
- isSetSourceLocDescr() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SourceLocDescr is configured.
- isSetSourceLon() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the SourceLon is configured.
- isSetSpectralPowerDensity() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxAntModeRef
-
Determine if the SpectralPowerDensity is configured.
- isSetSpectrumLink() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the SpectrumLink is configured.
- isSetSpeed() - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Determine if the Speed is configured.
- isSetSpreadSpectrum() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the SpreadSpectrum is configured.
- isSetSpreadSpectrum() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the SpreadSpectrum is configured.
- isSetSpuriousLevel() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the SpuriousLevel is configured.
- isSetSpuriousRejection() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the SpuriousRejection is configured.
- isSetSSReply() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the SSReply is configured.
- isSetSSRequest() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the SSRequest is configured.
- isSetSsRequest() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the ssRequest field is configured.
- isSetSsRequest() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Determine if the ssRequest field is configured.
- isSetSSRequestRef() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the SSRequestRef is configured.
- isSetSSRequestRef() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Determine if the SSRequestRef is configured.
- isSetStage() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the Stage is configured.
- isSetStageLocation() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the StageLocation is configured.
- isSetStageLocation() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Determine if the StageLocation is configured.
- isSetStageNum() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Determine if the StageNum is configured.
- isSetStandOffDist() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the StandOffDist is configured.
- isSetStartDate() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Determine if the StartDate is configured.
- isSetStartDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Determine if the StartDateTime is configured.
- isSetStartDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the StartDateTime is configured.
- isSetStartLocation() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the startLocation field is configured.
- isSetStartLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the StartLocationRef is configured.
- isSetStartTrigger() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the StartTrigger is configured.
- isSetState() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Determine if the State is configured.
- isSetState() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Determine if the State is configured.
- isSetStateCounty() - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Determine if the StateCounty is configured.
- isSetStateCounty() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the StateCounty is configured.
- isSetStation() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Station is configured.
- isSetStationConfig() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Determine if the StationConfig is configured.
- isSetStationControl() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the StationControl is configured.
- isSetStationID() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the StationID is configured.
- isSetStationID() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the StationID is configured.
- isSetStationLoc() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the StationLoc is configured.
- isSetStationName() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the StationName is configured.
- isSetStatisticalIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationValues
-
Determine if the StatisticalIndicator is configured.
- isSetStatisticalIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanValues
-
Determine if the StatisticalIndicator is configured.
- isSetStatisticalIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPValues
-
Determine if the StatisticalIndicator is configured.
- isSetStatisticalIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Determine if the StatisticalIndicator is configured.
- isSetStatisticalIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Determine if the StatisticalIndicator is configured.
- isSetStatisticalIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFValues
-
Determine if the StatisticalIndicator is configured.
- isSetStatus() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Determine if the Status is configured.
- isSetStatus() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Determine if the Status is configured.
- isSetStatus() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Determine if the Status is configured.
- isSetStatusChangeDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Determine if the StatusChangeDateTime is configured.
- isSetStatusLog() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the StatusLog is configured.
- isSetStatusLog() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the StatusLog is configured.
- isSetStnClass() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
Determine if the StnClass is configured.
- isSetStnClass() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Determine if the StnClass is configured.
- isSetStockNum() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the StockNum is configured.
- isSetStockNum() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.StockNum
-
Determine if the StockNum is configured.
- isSetStockNum() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Determine if the StockNum is configured.
- isSetStopDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Determine if the StopDateTime is configured.
- isSetStopDateTime() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the StopDateTime is configured.
- isSetStopLocation() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the stopLocation field is configured.
- isSetStopLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the StopLocationRef is configured.
- isSetStopTrigger() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the StopTrigger is configured.
- isSetStreet() - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Determine if the Street is configured.
- isSetStreet() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Determine if the Street is configured.
- isSetSubcarrierFreq() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the SubcarrierFreq is configured.
- isSetSubcarrierTone() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Determine if the SubcarrierTone is configured.
- isSetSupplementaryDetails() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the SupplementaryDetails is configured.
- isSetSupportabilityCode() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Determine if the SupportabilityCode is configured.
- isSetSymbolSize() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Determine if the SymbolSize is configured.
- isSetSyncMethod() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Determine if the SyncMethod is configured.
- isSetSysName() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.SysOfStation
-
Determine if the SysName is configured.
- isSetSysOfStation() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the SysOfStation is configured.
- isSetSysRelationEssential() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the SysRelationEssential is configured.
- isSetTAD() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Determine if the TAD is configured.
- isSetTargetDate() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Determine if the TargetDate is configured.
- isSetTargetID() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Determine if the TargetID is configured.
- isSetTechniques() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the Techniques is configured.
- isSetTelephoneFax() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Determine if the TelephoneFax is configured.
- isSetTelephoneFax() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Determine if the TelephoneFax is configured.
- isSetTelephoneFax() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Determine if the TelephoneFax is configured.
- isSetTerminationDate() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Determine if the TerminationDate is configured.
- isSetTerrainElevation() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Determine if the TerrainElevation is configured.
- isSetText() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Determine if the Text is configured.
- isSetThirdHarmonicLevel() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the ThirdHarmonicLevel is configured.
- isSetThreat() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the Threat is configured.
- isSetTiltAngleAdaptiveDriverDesc() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAngleAdaptiveDriverDesc is configured.
- isSetTiltAngleAdaptiveRuleDesc() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAngleAdaptiveRuleDesc is configured.
- isSetTiltAngleContinuous() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAngleContinuous is configured.
- isSetTiltAngleDuration() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAngleDuration is configured.
- isSetTiltAngleExtremeMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAngleExtremeMax is configured.
- isSetTiltAngleExtremeMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAngleExtremeMin is configured.
- isSetTiltAngleMean() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAngleMean is configured.
- isSetTiltAngleMedian() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAngleMedian is configured.
- isSetTiltAnglePatternPeriod() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAnglePatternPeriod is configured.
- isSetTiltAnglePatternType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAnglePatternType is configured.
- isSetTiltAngleRangeMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAngleRangeMax is configured.
- isSetTiltAngleRangeMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAngleRangeMin is configured.
- isSetTiltAngleRate() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAngleRate is configured.
- isSetTiltAngleSequenceDesc() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAngleSequenceDesc is configured.
- isSetTiltAngleStdDev() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAngleStdDev is configured.
- isSetTiltAngleStep() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Determine if the TiltAngleStep is configured.
- isSetTiltAngleValue() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationValues
-
Determine if the TiltAngleValue is configured.
- isSetTime() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the Time is configured.
- isSetTimeHopNumSlots() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the TimeHopNumSlots is configured.
- isSetTimeHopPulsesPerDwell() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the TimeHopPulsesPerDwell is configured.
- isSetTimingDeconflictionProtocol() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the TimingDeconflictionProtocol is configured.
- isSetTitle() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Determine if the Title is configured.
- isSetTitle() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Title is configured.
- isSetTitle() - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Determine if the Title is configured.
- isSetTitle() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Determine if the Title is configured.
- isSetTitle() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the Title is configured.
- isSetTitle() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Determine if the Title is configured.
- isSetTitleRank() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Determine if the TitleRank is configured.
- isSetTOA() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the TOA is configured.
- isSetTransmitter() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Determine if the transmitter field is configured.
- isSetTransmitter() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Determine if the Transmitter is configured.
- isSetTriggerOff() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Determine if the TriggerOff is configured.
- isSetTriggerOn() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Determine if the TriggerOn is configured.
- isSetTrunking() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the Trunking is configured.
- isSetTrunkingAssignment() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Determine if the TrunkingAssignment is configured.
- isSetTSDF() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the TSDF is configured.
- isSetTSPR() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Determine if the TSPR is configured.
- isSetTSPR() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the TSPR is configured.
- isSetTSPR() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the TSPR is configured.
- isSetTunability() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the Tunability is configured.
- isSetTunability() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the Tunability is configured.
- isSetTuning() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Determine if the Tuning is configured.
- isSetTuningMethod() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Determine if the TuningMethod is configured.
- isSetTuningMethod() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the TuningMethod is configured.
- isSetTuningStep() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Determine if the TuningStep is configured.
- isSetTuningStep() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Determine if the TuningStep is configured.
- isSetTuningStep() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Determine if the TuningStep is configured.
- isSetTuningStep() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Determine if the TuningStep is configured.
- isSetTuningStep() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Determine if the TuningStep is configured.
- isSetTxAntModeRef() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Determine if the TxAntModeRef is configured.
- isSetTxDuration() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Determine if the TxDuration is configured.
- isSetTxEndpointID() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramLine
-
Determine if the TxEndpointID is configured.
- isSetTxMode() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the TxMode is configured.
- isSetTxModeRef() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Determine if the TxModeRef is configured.
- isSetTxModulation() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the TxModulation is configured.
- isSetTxRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the TxRef is configured.
- isSetTxSignalTuning() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Determine if the TxSignalTuning is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Project
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.common.CaseNum
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.StockNum
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.PotentialVictims
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Determine if the Type is configured.
- isSetType() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Determine if the Type is configured.
- isSetTypeOfService() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the TypeOfService is configured.
- isSetUIC() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Determine if the UIC is configured.
- isSetUIC() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Determine if the UIC is configured.
- isSetUsage() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Determine if the Usage is configured.
- isSetUsageCode() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the UsageCode is configured.
- isSetUsageDescription() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Time
-
Determine if the UsageDescription is configured.
- isSetUsageFrequency() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the UsageFrequency is configured.
- isSetUsagePercentage() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the UsagePercentage is configured.
- isSetUsageType() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Determine if the UsageType is configured.
- isSetUsageType() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the UsageType is configured.
- isSetUseIndicator() - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Determine if the UseIndicator is configured.
- isSetUser() - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Determine if the User is configured.
- isSetUserCode() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Determine if the UserCode is configured.
- isSetUserNetCode() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the UserNetCode is configured.
- isSetUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the UsingCountries is configured.
- isSetUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Determine if the UsingCountries is configured.
- isSetUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Determine if the UsingCountries is configured.
- isSetUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Determine if the UsingCountries is configured.
- isSetUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Determine if the UsingCountries is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Code
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.ChannelFreq
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.common.Remarks
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Altitude
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.AntHeight
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Az
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Az180
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.BitRate
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.BurstRate
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.CodeRate
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.CurvePointLevel
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.D
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DaysOfMonth
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DaysOfWeek
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dB
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBi
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Dble
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBm
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBW
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBWHz
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DigestCode
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Dimension
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DistEarth
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DistSpace
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DT
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Duration_UN4
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Elev
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Elev180
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.EmsDes
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FieldStrength
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqH
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqM
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqOffset
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Height_UN4
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.hops
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Hours
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.IFNum
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.InfoDataRate
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.kChirps
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Kelvins
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Lat
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Lon
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MChips
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MEMO
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.microsecs
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.millisecs
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MinSec
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.minutes
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Months
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.NavAidChnl
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.NetNumber
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Percent
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.platform
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.priority
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.PulseRate
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Rejection_DB1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Rejection_DB2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Releasability
-
Deprecated.
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.RFChgRate
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.RotationRate
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S10
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S100
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S11
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S12
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S14
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S15
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S150
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S16
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S18
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S20
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S200
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S22
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S24
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S25
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S255
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S3
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S30
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S35
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S4
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S40
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S5
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S50
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S500
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S6
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S60
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S7
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S70
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S8
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S80
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S9
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanRate
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanSpeed
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SCLevel
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_4_1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_5_2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SmallMicrosecs
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_15
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_6
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN3_1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN4_1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_3
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_4
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_6
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_8
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Speed
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TBD
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TSDFValue
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TString
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_3
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_4
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_6
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN11_8
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_3
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_4
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_6
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16_15
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN18_6
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2_1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_3
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_4
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_3
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_4
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_4
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_5
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_3
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_4
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_5
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_6
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_3
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_4
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_5
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_6
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_7
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB_5_2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US1
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US10
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US12
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US15
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US20
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US3
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US30
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US4
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US40
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US5
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US50
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US6
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Bits
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB150
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB90
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBm
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBW
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWHz
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWS
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Deg_Signed
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees90
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Duration
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Elev
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgAm
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgFm
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPFm
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent2
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent3
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngle
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngleRate
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPM
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPS
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PRIChgRate
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanRate
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanSpeed
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_TiltAngRate
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Twips
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_UN16_9
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Years
-
Determine if the value property is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TDate
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TDateTime
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Determine if the Value is configured.
- isSetValue() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Determine if the Value is configured.
- isSetVariance() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Determine if the Variance is configured.
- isSetVersion() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Determine if the Version is configured.
- isSetVersion() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Determine if the Version is configured.
- isSetVertAperture() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the VertAperture is configured.
- isSetVertBwMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the VertBwMax is configured.
- isSetVertBwMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Determine if the VertBwMax is configured.
- isSetVertBwMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the VertBwMin is configured.
- isSetVertBwMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Determine if the VertBwMin is configured.
- isSetVertDimension() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the VertDimension is configured.
- isSetVertScanAngleMax() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the VertScanAngleMax is configured.
- isSetVertScanAngleMin() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the VertScanAngleMin is configured.
- isSetVertScanRate() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the VertScanRate is configured.
- isSetVertScanSpeed() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the VertScanSpeed is configured.
- isSetVertScanType() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the VertScanType is configured.
- isSetVertSidelobeAttenuation() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the VertSidelobeAttenuation is configured.
- isSetVertSidelobeElev() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the VertSidelobeElev is configured.
- isSetVertSidelobeSuppressed() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Determine if the VertSidelobeSuppressed is configured.
- isSetVictimAsgnRef() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the VictimAsgnRef is configured.
- isSetVictimAssignment() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the victimAssignment field is configured.
- isSetVictimCountry() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the VictimCountry is configured.
- isSetVictimFreqMax() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the VictimFreqMax is configured.
- isSetVictimFreqMin() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the VictimFreqMin is configured.
- isSetVictimLat() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the VictimLat is configured.
- isSetVictimLocDescr() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the VictimLocDescr is configured.
- isSetVictimLon() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the VictimLon is configured.
- isSetVictimName() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.PotentialVictims
-
Determine if the VictimName is configured.
- isSetVictimNotation() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.PotentialVictims
-
Determine if the VictimNotation is configured.
- isSetVictimSystem() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Determine if the VictimSystem is configured.
- isSetVSWR() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Determine if the VSWR is configured.
- isSetWartimeUse() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Determine if the WartimeUse is configured.
- isSetWaypointIdx() - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Determine if the WaypointIdx is configured.
- isSetYears() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Determine if the Years is configured.
- isSetYears() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Determine if the Years is configured.
- isSetYears() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Determine if the Years is configured.
- isSetYears() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Determine if the Years is configured.
- isTransient(Field) - Static method in class us.gov.dod.standard.ssrf.SSRFUtility
-
Inspect a class field and determine if it is TRANSIENT - e.g.
- isValid() - Method in class us.gov.dod.standard.ssrf.SSRF
-
Validate a SSRF Object instance.
- S1 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S1 data type.
- S1() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S1
-
Construct a new, empty S1 instance.
- S1(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S1
-
Construct a new S1 instance with the given initial value.
- S10 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S10 data type.
- S10() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S10
-
Construct a new, empty S10 instance.
- S10(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S10
-
Construct a new S10 instance with the given initial value.
- S100 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S100 data type.
- S100() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S100
-
Construct a new, empty S100 instance.
- S100(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S100
-
Construct a new S100 instance with the given initial value.
- S11 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S11 data type.
- S11() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S11
-
Construct a new, empty S11 instance.
- S11(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S11
-
Construct a new S11 instance with the given initial value.
- S12 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S12 data type.
- S12() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S12
-
Construct a new, empty S12 instance.
- S12(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S12
-
Construct a new S12 instance with the given initial value.
- S14 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S14 data type.
- S14() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S14
-
Construct a new, empty S14 instance.
- S14(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S14
-
Construct a new S14 instance with the given initial value.
- S15 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S15 data type.
- S15() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S15
-
Construct a new, empty S15 instance.
- S15(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S15
-
Construct a new S15 instance with the given initial value.
- S150 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S150 data type.
- S150() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S150
-
Construct a new, empty S150 instance.
- S150(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S150
-
Construct a new S150 instance with the given initial value.
- S16 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S16 data type.
- S16() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S16
-
Construct a new, empty S16 instance.
- S16(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S16
-
Construct a new S16 instance with the given initial value.
- S18 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S18 data type.
- S18() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S18
-
Construct a new, empty S18 instance.
- S18(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S18
-
Construct a new S18 instance with the given initial value.
- S2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S2 data type.
- S2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S2
-
Construct a new, empty S2 instance.
- S2(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S2
-
Construct a new S2 instance with the given initial value.
- S20 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S20 data type.
- S20() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S20
-
Construct a new, empty S20 instance.
- S20(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S20
-
Construct a new S20 instance with the given initial value.
- S200 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S200 data type.
- S200() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S200
-
Construct a new, empty S200 instance.
- S200(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S200
-
Construct a new S200 instance with the given initial value.
- S22 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S22 data type.
- S22() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S22
-
Construct a new, empty S22 instance.
- S22(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S22
-
Construct a new S22 instance with the given initial value.
- S24 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S24 data type.
- S24() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S24
-
Construct a new, empty S24 instance.
- S24(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S24
-
Construct a new S24 instance with the given initial value.
- S25 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S25 data type.
- S25() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S25
-
Construct a new, empty S25 instance.
- S25(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S25
-
Construct a new S25 instance with the given initial value.
- S255 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S255 data type.
- S255() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S255
-
Construct a new, empty S255 instance.
- S255(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S255
-
Construct a new S255 instance with the given initial value.
- S3 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S3 data type.
- S3() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S3
-
Construct a new, empty S3 instance.
- S3(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S3
-
Construct a new S3 instance with the given initial value.
- S30 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S30 data type.
- S30() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S30
-
Construct a new, empty S30 instance.
- S30(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S30
-
Construct a new S30 instance with the given initial value.
- S35 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S35 data type.
- S35() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S35
-
Construct a new, empty S35 instance.
- S35(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S35
-
Construct a new S35 instance with the given initial value.
- S4 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S4 data type.
- S4() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S4
-
Construct a new, empty S4 instance.
- S4(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S4
-
Construct a new S4 instance with the given initial value.
- S40 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S40 data type.
- S40() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S40
-
Construct a new, empty S40 instance.
- S40(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S40
-
Construct a new S40 instance with the given initial value.
- S5 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S5 data type.
- S5() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S5
-
Construct a new, empty S5 instance.
- S5(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S5
-
Construct a new S5 instance with the given initial value.
- S50 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S50 data type.
- S50() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S50
-
Construct a new, empty S50 instance.
- S50(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S50
-
Construct a new S50 instance with the given initial value.
- S500 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S500 data type.
- S500() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S500
-
Construct a new, empty S500 instance.
- S500(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S500
-
Construct a new S500 instance with the given initial value.
- S6 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S6 data type.
- S6() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S6
-
Construct a new, empty S6 instance.
- S6(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S6
-
Construct a new S6 instance with the given initial value.
- S60 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S60 data type.
- S60() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S60
-
Construct a new, empty S60 instance.
- S60(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S60
-
Construct a new S60 instance with the given initial value.
- S7 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S7 data type.
- S7() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S7
-
Construct a new, empty S7 instance.
- S7(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S7
-
Construct a new S7 instance with the given initial value.
- S70 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S70 data type.
- S70() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S70
-
Construct a new, empty S70 instance.
- S70(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S70
-
Construct a new S70 instance with the given initial value.
- S8 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S8 data type.
- S8() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S8
-
Construct a new, empty S8 instance.
- S8(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S8
-
Construct a new S8 instance with the given initial value.
- S80 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S80 data type.
- S80() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S80
-
Construct a new, empty S80 instance.
- S80(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S80
-
Construct a new S80 instance with the given initial value.
- S9 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF S9 data type.
- S9() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S9
-
Construct a new, empty S9 instance.
- S9(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.S9
-
Construct a new S9 instance with the given initial value.
- Satellite - Class in us.gov.dod.standard.ssrf._3_1
-
Satellite contains station information related to the space service.
- Satellite() - Constructor for class us.gov.dod.standard.ssrf._3_1.Satellite
-
No arg constructor.
- satellite - Variable in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
- ScanRate - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF ScanRate data type.
- ScanRate() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanRate
-
Construct a new, empty ScanRate instance.
- ScanRate(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanRate
-
Construct a new ScanRate instance with the given initial value.
- ScanRate(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanRate
-
Construct a new ScanRate instance with the given initial value.
- ScanSpeed - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF ScanSpeed data type.
- ScanSpeed() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanSpeed
-
Construct a new, empty ScanSpeed instance.
- ScanSpeed(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanSpeed
-
Construct a new ScanSpeed instance with the given initial value.
- ScanSpeed(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanSpeed
-
Construct a new ScanSpeed instance with the given initial value.
- SchemaRoot<T> - Class in us.gov.dod.standard.ssrf._3_1
-
SchemaRoot is an abstract class extended by
SSRF
and
SMADEF
containing common attributes for both types.
- SchemaRoot() - Constructor for class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
- SCLevel - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SCLevel data type.
- SCLevel() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SCLevel
-
Construct a new, empty SCLevel instance.
- SCLevel(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SCLevel
-
Construct a new SCLevel instance with the given initial value.
- SCLevel(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SCLevel
-
Construct a new SCLevel instance with the given initial value.
- SecurityClass - Class in us.gov.dod.standard.ssrf._3_1.common
-
SecurityClass (US) contains the security classification from one or more data
information sources.
- securityClass - Variable in class us.gov.dod.standard.ssrf._3_1.Common
-
US:SecurityClass (Optional)
- SecurityClass() - Constructor for class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
- serial - Variable in class us.gov.dod.standard.ssrf._3_1.Common
-
Serial - Serial (Required)
- Serial - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
A SSRF SERIAL number container with SSRF Standard Metadata Attributes.
- Serial(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Construct a new data type instance with the indicated value.
- ServiceArea - Class in us.gov.dod.standard.ssrf._3_1.satellite
-
ServiceArea contains the geographic area serviced by the satellite.
- ServiceArea() - Constructor for class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
- setAction(TString) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Set the intended type of modification to the given code list..
- setAction(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Set the action which triggered the transmission, or to be performed upon
reception, of this dataset..
- setActivationPower(dBm) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the signal level required to activate the loadset, for systems capable
of selecting multiple power thresholds by sub-band or other region of
interest..
- setActivationTime(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the minimum time required to trigger the jammer after start of signal
reception..
- setActualEffect(TString) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Set the actual impact a jamming mission had on a specific target area..
- setActualPerformance(TString) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Set In Data Item US:ActualPerformance (US), enter the assessed
effectiveness of the service request..
- setAdditionalChannelsRationale(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set a rationale for the additional channels (e.g., channel loading, queuing
times, or new users)..
- setAddress(S255) - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Set the e-mail address..
- setAdjacentChannelSelectivity(dB) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the ratio in dB between the wanted signal and the maximum level of an
unwanted signal in the adjacent channel which still allows correct
reception of the wanted signal..
- setAdministration(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Set the nation or regulatory body that administers this note..
- setAdministration(S100) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the country and/or administration which registered the satellite..
- setAdministration(S50) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the nation or regulatory body that administers this Table of
Allocations..
- setAffectedCSA(TString) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the responsible Combatant Commander for the geographic area where the
interference occurred and/or the victim's organization..
- setAffectedEquipment(S100) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the nomenclature or description of equipment experiencing the
interference..
- setAgencyActionNum(S12) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the "An" identifier used to track transactions..
- setAgencyCode(S80) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Set the agency responsible for this status log entry..
- setAgencyComments(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the Agency remarks in the applications processed through the
Interdepartment Radio Advisory Committee (IRAC).
- setAgencySerialNum(S12) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Set the externally-assigned unique identifier of a frequency assignment..
- setAgencySerialNum(S12) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the externally-assigned unique identifier of a frequency assignment..
- setAgencySerialNum(S12) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Set the externally-assigned unique identifier of a frequency assignment..
- setAllocatedByFootnote(TString) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set "Yes" if this service is allocated to this frequency band by footnote
(i.e., the only indication this service is allowed in this band is a
footnote).
- setAllocatedService(TString) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set a radiocommunication service recognized by an administration that is
allocated to this frequency band (e.g., "Fixed Service")..
- setAllocatedService(TString) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Set a radiocommunication service recognized by an administration that is
allocated to this frequency band (e.g., "Fixed Service")..
- setAllotChannel(S6) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Set a TACAN channel or net number.
- setAlternateIdentifier(S50) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set any alternate identifier for the document as needed..
- setAlternateName(S100) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set an alternate name or nickname for the organisation..
- setAltitudeMax(Altitude) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the minimum or nominal height of the point above the terrain (also
known as "above ground level" AGL).
- setAltitudeMax(Altitude) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set the minimum or nominal height of the point above the terrain (also
known as "above ground level" AGL).
- setAltitudeMax(Altitude) - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Set .
- setAltitudeMin(Altitude) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the minimum or nominal height of the point above the terrain (also
known as "above ground level" AGL)..
- setAltitudeMin(Altitude) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set the minimum or nominal height of the point above the terrain (also
known as "above ground level" AGL)..
- setAltitudeMin(Altitude) - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Set .
- setAMIdx(UN5_3) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the amplitude modulation index, which is a unitless value for an
amplitude modulation signal derived by dividing the peak modulating voltage
by the peak carrier voltage.
- setAMRMSIdx(UN5_3) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the RMS modulation index when analog or phase modulation is used and
the baseband consists of FDM channels or multiple subcarrier signals.
- setAntennaHeight(Altitude) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Set the antenna height above the ground level.
- setAntFeedpointHeight(Height_UN4) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the antenna feed point height above the terrain, in metres.
- setAntFeedpointHeight(Height_UN4) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntryLocation
-
Set the antenna feed point height above the terrain, in metres.
- setAntStabilisation(TString) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the method by which the jamming antenna beam is focused..
- setAntStructureHeight(AntHeight) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the overall height, of the antenna support structure above ground
level..
- setAntType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the type of antenna..
- setApertureDiameter(Dimension) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the cross-section of an antenna radiation pattern in the direction of
highest gain..
- setApplicationDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the date on which the application will be submitted to the appropriate
spectrum management office..
- setApplicationSPSNumber(S11) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the application Spectrum Planning Subcommittee (SPS) document
identifier assigned by NTIA.
- setApprovalLevel(TString) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the approval status of the JRFL entry..
- setApprovalSPSNum(S11) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the Certification of Spectrum Support Spectrum Planning Subcommittee
(SPS) document identifier assigned by NTIA.
- setApprovedBy(S50) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the identifier of the designated expert who last approved or accepted
the dataset.
- setApprovedDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the last date and time, based on Greenwich Mean Time (GMT), that the
dataset was approved or accepted by a designated expert.
- setAsgnAllotRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
- setAssignmentAuthority(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the user acceptance of host-nation or NATO HQ frequency nominations..
- setAssignmentDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date the assignment was most recently authorized..
- setAssignmentRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
- setAuthor(S255) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the name of the author of the reference, if it cannot be covered by a
ContactRef..
- setAuthor(S100) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Set the title (e.g., Ms., Dr.) and name of the individual that is the
source of the comment..
- setAuthorised(UN9) - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
Set the authorised quantity of the referenced equipment or system..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available..
- setAvailable(UN9) - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
Set the available quantity of the referenced equipment or system..
- setAvgPowerMax(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the maximum average power.
- setAvgPowerMin(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the minimum or nominal average power..
- setAxialRatio(Unsigned_DB_5_2) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the ratio of the polarisation ellipse major axis to its minor axis
expressed in decibels..
- setAzBoresightAngle(US_Deg_Signed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the position of the emitter Mainbeam (aka, Mainlobe) boresight
referenced from true north for ground based fixed emitters, and the emitter
defined centerline for other platforms (e.g., mobile, airborne,
shipborne)..
- setAzimuth(Az) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the angle of the semi-major axis in the horizontal plane, measured from
true North..
- setAzScanChangeRate(US_PRIChgRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the rate of change for horizontal Scan Period variations expressed in
Scan Period change per unit of time.
- setAzScanRateExtremeMax(US_ScanRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the range of horizontal scan rate values that represent 100% of the
signal observed Scan values obtained from a statistical study of a data
set.
- setAzScanRateExtremeMin(US_ScanRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the range of horizontal scan rate values that represent 100% of the
signal observed Scan values obtained from a statistical study of a data
set.
- setAzScanRateMean(US_ScanRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the average horizontal scan rate value for a signal that changes
horizontal scan rates on a non-patterned basis..
- setAzScanRateMedian(US_ScanRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the horizontal scan rate that the signal most often used, based on a
statistical study of a data set..
- setAzScanSector(US_Degrees) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the total angular width in the horizontal plane (aka, azimuth) the
subject emitter antenna mainbeam (aka, mainlobe) scans/covers in one
complete scan.
- setAzScanSectorMax(US_Degrees) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the total angular width in the horizontal plane (aka, azimuth) the
subject emitter antenna mainbeam (aka, mainlobe) is capable of scanning..
- setAzScanVelocity(US_ScanSpeed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the horizontal angular speed (i.e., degrees per second) of the subject
emitter Mainbeam (aka., mainlobe) scan referenced to a fixed point..
- setAzStart(Az) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Set the start azimuth angle for the blanked sector.
- setAzStop(Az) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Set the stop azimuth angle for the blanked sector.
- setBandwidth(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Set In Data Item Bandwidth, as an alternative to FreqMin/FreqMax, enter the
total operating bandwidth of the Antenna centered around FreqMin..
- setBandwidth(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the width of the range (or band) of restricted frequency(s)..
- setBeamType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set one of the codes describing the shape or type of the antenna main
beam..
- setBeamType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Set In Data Item BeamType (US), indicate the pattern beam type that best
represents the general shape of the beam as it radiates from the antenna.
- setBearing(Az) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the bearing of the target in degrees referenced to the "boresight" of
the jammer equipment or the platform that the jammer equipment is mounted
on..
- setBitDuration(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the period of elapsed time, per bit instance, before change of states..
- setBitDuration(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set the shortest time interval (within a pulse for pulsed signals) that a
discrete frequency, phase, or amplitude value stays at its state before
changing to a new one..
- setBitRate(BitRate) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set the rate at which the signal exhibits a change of FREQ/PHASE/AMP;
inverse of the minimum bit duration (e.g., a signal that has a .977 usec
minimum bit has a bit rate of 1024 kbit/sec)..
- setBurstDuration(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the pulse burst duration..
- setBurstNumPulses(UN8) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the number of pulses in a single pulse burst..
- setBurstOffTime(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the pulse burst off time in microseconds (duration of time between the
end of one pulse burst to the start of the next pulse burst)..
- setBurstRate(BurstRate) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the number of pulse bursts per second..
- setBw(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set the bandwidth measurement of the curve values..
- setCalculated(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
- setCalculated(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
- setCalculated(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
- setCalculated(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Set "Yes" if the power value(s) have been calculated, or "No" if they have
been measured..
- setCallSign(S20) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the call sign assigned to the transmitting station.
- setCallSign(S20) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the call sign assigned to the transmitting station.
- setCarrierSuppression(dB) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the amount of reduction of the signals carrier, as compared to a non
attenuated signal carrier..
- setCarrierWaveform(S100) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the waveform that will be used for the carrier of the jamming signal..
- setCenterFreq(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the middle frequency in the band..
- setChangeDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.NarrowBandPlanning
-
Set the date this record is expected to be updated to comply with narrow
band transition plans..
- setChannelDwell(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the time the transmitter is on..
- setChannelSpacing(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the frequency increment between discrete channels..
- setChannelSpacing(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set In Data Item ChannelSpacing (US)- enter the amount of bandwidth
allotted to each channel, measured as the spacing between center
frequencies (or wavelengths) of adjacent channels..
- setCharacteristics(TString) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the interference characteristics..
- setChipRate(MChips) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the maximum generator rate used to encode/decode a Direct Sequence
spread spectrum signal..
- setChipRate(MChips) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the chip rate.
- setCityArea(S50) - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Set the city of the address or an operational area name..
- setCityArea(S50) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the city of the address or an operational area name..
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.common.Remarks
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set the classification of the current data item.
- setCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set the classification of the current data item.
- setClsAuthority(S30) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the identity, by name and position, or by personal identifier, of the
original classification authority..
- setClsOrg(S30) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the organization of the original classification authority..
- setClsReason(S15) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the reason(s) for the classification.
- setCmdLevel(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the organisational level of the force element according to stratum,
echelon or point at which authority or control is maintained..
- setCOCOMGroup(S8) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set PACOM to identify a grouping of frequencies having a like or similar
use.
- setCode(US20) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Set an alphanumeric combination that is used to identify a particular
Notation/Signal..
- setCode(US20) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Set an alphanumeric combination that is used to identify a particular
Notation/Signal..
- setCodeListCode(US3) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Set the three-letter code of an existing Code List to be modified, or an
unused three-letter code in the case of the creation of a new Code List..
- setCodePeriod(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Set the length of time of the pseudorandom code repetition period..
- setCodeRate(BitRate) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Set the pseudorandom code rate..
- setCodeRate(CodeRate) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the post encryption number of symbols per bit for a digital data
stream.
- setColourNum(UN2) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set a Colour Number associated to the assigned frequency.
- setColourWord(S20) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the Colour Word associated to the assigned frequency.
- setComment(S255) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Set amplifying information to describe the Status of the Assignment..
- setComments(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.RecordNote
-
Set the Amplifying conditional comments for the note as agreed to by the
Interdepartment Radio Advisory Committee (IRAC) Frequency Assignment
Subcommittee (FAS)..
- setCompMethod(S40) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the method employed to reduce the period of the pulse..
- setCompRatio(UN8_4) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the ratio of the uncompressed pulse width to the compressed pulse width
measured at the 50% amplitude (-3 dB) points..
- setConductedEmissions(US_DBm) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the power level of undesired signals generated in the receiver and
conducted by way of the connection to the receiver..
- setConfigApprovedBy(S50) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set .
- setConfigApprovedDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set .
- setConfigFreqUse(TString) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set .
- setConfigID(S100) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set a short name for the configuration; this name should be a meaningful
identification of the configuration, but it can also be automatically
generated in some systems.
- setConfigID(S100) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the unique identifier of one the configurations used by this Assignment
at this specific Station..
- setConfigID(S100) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramLine
-
Set a reference to a Configuration associated with this line on the
diagram..
- setConnectorType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Set the type of connector used to attach the antenna to the equipment or
the antenna to the transmission media that attaches the equipment to the
antenna..
- setContinuous(TString) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set In Data Item Continuous (US), indicate whether pulse-to-pulse ERP
variations are Discrete or Continuous.
- setContinuousUpdate(TString) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Set if effectiveness data should be provided continually or just once..
- setControlRequestNum(S15) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the control or request identifier that allows subordinate organizations
to track specific frequency applications..
- setCoordinationComments(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the Comments related to the external coordination of a frequency
assignment..
- setCoordinationNum(S15) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the US Military Communications-Electronics Board (MCEB) identifier
assigned to the equipment or system.
- setCoordinationNum(S15) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the US Military Communications-Electronics Board (MCEB) identifier
assigned to the equipment or system.
- setCoordinationNum(S15) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the US Military Communications-Electronics Board (MCEB) identifier
assigned to the equipment or system.
- setCoordIndicator(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CoordinationData
-
Set the coordinating entity..
- setCositeSep(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the minimum required frequency separation between the equipment for
which the assignment is being made and any other equipment operating at the
same location.
- setCositeSepDescription(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set a free text description of the minimum required frequency separation
between a number of transmitters, or between a transmitter and a related
receiver in radio relay frequency requests..
- setCountry(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Manufacturer
-
Set the country or area in which the Manufacturer has its Headquarters..
- setCountry(TString) - Method in class us.gov.dod.standard.ssrf._3_1.common.CaseNum
-
Set the nation or body who provided or assigned the case number..
- setCountry(TString) - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Set the country or area code.
- setCountry(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the country or area code.
- setCountry(ListCCY) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Set the Serial number Country part (REQUIRED).
- setCountry(ListCCY) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Set the Serial number Country part (REQUIRED).
- setCountry(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the country to which the Role belongs.
- setCountryName(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.UsingCountries
-
Set the designator for a specific country associated with the emitter that
transmits the subject Notation/Signal.
- setCouplingLoss(dB) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
Set the loss that occurs when energy is transferred between the
transmitter/receiver and the antenna..
- setCurrentStage(TString) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the current stage of the system..
- setCutAngle(Az180) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Set the angle of the pattern cut.
- setCutType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Set the type of the pattern cut.
- setDataSource(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the source or organization from which the data record was received..
- setDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Set the previous frequency assignment Government Master File (GMF)
authorization date..
- setDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Set the date of the source document..
- setDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Set the date of the permitted downgrading..
- setDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the publication date of the external reference.
- setDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Set the date the comment was provided..
- setDateApprovalRequired(D) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the date by which the approval of the application is desired.
- setDateReceivedByCountry(D) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the date the request was received by the Host Nation Administration..
- setDateResponseRequired(D) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the date by which the frequency assignment or Spectrum Supportability
Reply is required by the user in order to complete necessary advanced
operation coordination..
- setDateResponseRequired(D) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date by which the Assignment or SSReply is required by the
requestor..
- setDateResponseRequired(D) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the date by which the frequency assignment or Spectrum Supportability
Reply is required by the user in order to complete necessary advanced
operation coordination..
- setDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Set the date and UTC time of this status log entry..
- setDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Set the date and time that the force element is at the selected waypoint..
- setDaysOfMonth(DaysOfMonth) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the day of month [1-31] when the Assignment will be guarded (monitored)
or used for transmission..
- setDaysOfMonth(DaysOfMonth) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the day of month [1-31] that the Force element is planned for
deployment..
- setDaysOfMonth(DaysOfMonth) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the day of month [1-31]..
- setDaysOfMonth(DaysOfMonth) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the day of month [1-31]..
- setDaysOfWeek(DaysOfWeek) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the weekday [0-7 where 0 and 7 are for Sunday, 1 for Monday, etc] when
the Assignment will be guarded (monitored) or used for transmission..
- setDaysOfWeek(DaysOfWeek) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the weekday [0-7 where 0 and 7 are for Sunday, 1 for Monday, etc] that
the Force element is planned for deployment..
- setDaysOfWeek(DaysOfWeek) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the weekday [0-7 where 0 and 7 are for Sunday, 1 for Monday, etc]..
- setDaysOfWeek(DaysOfWeek) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the weekday [0-7 where 0 and 7 are for Sunday, 1 for Monday, etc]..
- setDeclsDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the declassification date for DEDATE and DE25Xn-based declassification
instructions..
- setDeclsEvent(S200) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the declassification event, when necessary based on the
declassification instructions..
- setDeclsType(S10) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the declassification instructions of the dataset.
- setDescription(S255) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Code
-
Set In Data Item Description, the long text name of the code entry or a
brief description of the entry to be created or modified..
- setDescription(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Set the description of the intended contents of new code list, and the
element(s) where it will be used..
- setDescription(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
Set free text Contact information for legacy applications.
- setDescription(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Project
-
Set any additional amplifying information about the project..
- setDescription(S100) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set a description of the operational mode; this description should be a
meaningful explanation of the mode main characteristics..
- setDescription(S18) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
Set the name of an individual or organization related to the frequency
assignment..
- setDescription(S100) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set a description of the operational configuration.
- setDescription(S500) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a general description of the Dataset that is inheriting Common.
- setDescription(S100) - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Set the title for the address; for an Organisation, it can be the name of
the specific Branch or office; for a Contact or a Role, it can be the job
title associated to the address..
- setDescription(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set a description of the timing deconfliction protocol..
- setDescription(S100) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set a description of the operational mode; this description should be a
meaningful explanation of the mode main characteristics..
- setDescription(S100) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set a human-readable description of a diagram endpoint..
- setDescription(S100) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set a description of the operational mode; this description should be a
meaningful explanation of the mode main characteristics..
- setDesiredEffect(TString) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Set the expected impact a jamming mission will have on a specific target
area..
- setDesiredPerformance(TString) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Set the desired effectiveness of the service request.
- setDiameter(Dimension) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the cross-section of an antenna radiation pattern in the direction of
highest gain..
- setDigitalModType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Set the type of digital modulation..
- setDir(Az) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPatternPoint
-
Set the direction in degrees in reference to the pointing angle of the
antenna set to zero..
- setDirection(TString) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the sweep direction from the center frequency..
- setDispatcher(S1) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set if a Dispatcher accesses base stations or repeaters in the trunked land
mobile system..
- setDispatcherExplanation(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set how the dispatcher accesses the base station or repeater..
- setDistributionGroups(S20) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set In Data Item DistributionGroups (US), identify to whom the signed
certification should be distributed (e.g., "J-12 Holders")..
- setDocketNum(S8) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Set the previous frequency assignment Government Master File (GMF)
authorization docket number..
- setDocumentCls(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the classification level of the Reference..
- setDowncls(TString) - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Set the classification level of the dataset after downgrading..
- setDowngradeInfo(S200) - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Set additional downgrading information, if any..
- setDuplexSep(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the minimum or exact duplex frequency separation.
- setDuplexSep(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the minimum or exact duplex frequency separation.
- setDuplexSepType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set if the frequency separation must be exactly, or at the minimum, the
amount specified..
- setDuplexSepType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set if the frequency separation must be exactly, or at the minimum, the
amount specified..
- setDuration(Duration_UN4) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the number of minutes for which an event will live.
- setDuration(Duration_UN4) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the number of minutes for which an event will live.
- setDuration(Duration_UN4) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the number of minutes for which an event will live.
- setDuration(Duration_UN4) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the number of minutes for which an event will live.
- setDuration(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set the amount of time the frequency is being monitored or jammed..
- setDuration(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Set the period of dwell for the baseband audio frequency, before it is
disabled or switched..
- setDutyCycleMax(Percent) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set as a percentage, the maximum ratio of the pulse duration to the pulse
period.
- setDutyCycleMin(Percent) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set as a percentage, the minimum or nominal ratio of the pulse duration to
the pulse period..
- setDwell(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the frequency range dwell time; how long a sweep pauses on a particular
frequency before moving to next technique..
- setDwellTime(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the dwell time at any RF when the RF dwells at particular values for
more than one pulse in a row..
- setEarthCoverage(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the area of earth coverage..
- setEffectiveDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Set the date by which the dataset is to be operational or effective..
- setEffectiveDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the date by which the dataset is to be operational or effective..
- setEffectiveDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the date by which the dataset is to be operational or effective..
- setEffectiveDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the date by which the dataset is to be operational or effective..
- setEffectiveDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Set the date this note comes in force..
- setEffectiveDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the date by which the dataset is to be operational or effective..
- setEffectiveDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the date by which the dataset is to be operational or effective..
- setEffectiveDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the date by which the dataset is to be operational or effective..
- setEffectiveDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set the date by which the dataset is to be operational or effective..
- setEffectiveDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the date by which the dataset is to be operational or effective..
- setEffectiveDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date and UTC time when the Assignment will be operational..
- setEffectiveDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the width of the range (or band) of restricted frequency(s)..
- setEfficiency(Percent) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntEfficiency
-
Set the efficiency of the antenna within the frequency range which is being
reported..
- setEIRPMax(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the maximum effective isotropic radiated power (EIRP) radiated from the
transmitter antenna.
- setEIRPMax(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the maximum effective isotropic radiated power (EIRP) radiated from the
transmitter antenna.
- setEIRPMin(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the minimum or nominal effective isotropic radiated power (EIRP)
radiated from the transmitter antenna.
- setEIRPMin(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the minimum or nominal effective isotropic radiated power (EIRP)
radiated from the transmitter antenna.
- setElevScanChangeRate(US_PRIChgRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set In Data Item Vertical Scan Change Rate (US), enter the rate of change
for vertical Scan Period variations expressed in Scan Period change per
unit of time.
- setElevScanRateExtremeMax(US_ScanRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set In Data Item Extreme Vertical Scan Rate Max (US), enter the range of
vertical scan rate values that represent 100% of the signal observed Scan
values obtained from a statistical study of a data set.
- setElevScanRateExtremeMin(US_ScanRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set In Data Item Extreme Vertical Scan Rate Min (US), enter the range of
vertical scan rate values that represent 100% of the signal observed Scan
values obtained from a statistical study of a data set.
- setElevScanRateMean(US_ScanRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the average vertical scan rate value for a signal that changes vertical
scan rates on a non-patterned basis..
- setElevScanRateMedian(US_ScanRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the vertical scan rate that the signal most often used, based on a
statistical study of a data set..
- setElevScanSector(US_Degrees) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the total angular width in the vertical plane (aka, elevation) the
subject emitter antenna mainbeam (aka, mainlobe) scans/covers in one
complete scan.
- setElevScanSectorMax(US_Degrees) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the total angular width in the vertical plane (aka, elevation) the
subject emitter antenna mainbeam (aka, mainlobe) is capable of scanning..
- setElevScanVelocity(US_ScanSpeed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the vertical angular speed (i.e., degrees per second) of the subject
emitter Mainbeam (aka., mainlobe) scan referenced to a fixed point..
- setElevStart(Elev) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Set the start elevation angle for the blanked sector.
- setElevStop(Elev) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Set the stop elevation angle for the blanked sector.
- setEmergency(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set "Yes" if the system may be used in a case of emergency..
- setEmergency(TString) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set "Yes" if the system may be used in a case of emergency..
- setEmergency(TString) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set "Yes" if the system may be used in a case of emergency..
- setEmsClass(EmsDes) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Emission
-
Set a three to five characters code, derived from the table below,
representing the emission classification.
- setEmsClass(EmsDes) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigEmission
-
Set a three to five characters code, derived from the table below,
representing the emission classification.
- setEndpointID(S20) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set an identifier for each icon on the diagram.
- setEntryBy(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- setEntryDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the date and UTC Time the dataset was initially entered into the data
repository (e.g., FRRS for USA, SMIR for NATO).
- setEqpFnct(TString) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
Set the equipment function..
- setERPActualMax(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the highest discrete ERP value which is found in a single piece of a
complete data (e.g., in a single intercept that contains the complete ERP
characteristics of the signal).
- setERPActualMin(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the lowest discrete ERP value which is found in a single piece of a
complete data (e.g., in a single intercept that contains the complete ERP
characteristics of the signal)..
- setERPAdaptiveDriverDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the condition which controls, or can be associated with, the signal ERP
variations..
- setERPAdaptiveRuleDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the rule which describes the signal ERP variations..
- setERPChangeRate(US_DBWS) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the rate of change for ERP variations expressed in ERP change per unit
of time..
- setERPDwell(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPValues
-
Set the time duration for a complete dwell/group of pulses which all have
the same discrete ERP value, or for a continuous wave at a constant ERP
value..
- setERPExtremeMax(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the upper ERP value that represent 100% of the signal observed ERP
values which were obtained from a statistical study of a data set.
- setERPExtremeMin(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the lower ERP value that represent 100% of the signal observed ERP
values which were obtained from a statistical study of a data set..
- setERPMean(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the mean ERP value for a signal which changes ERP values on a
non-patterned basis..
- setERPMedian(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the observed ERP value, or the observed ERP values in the case of a
signal with multiple discrete/individual ERP values, that the signal most
often used based on a statistical study of a dataset.
- setERPNumber(S50) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the Emergency Readiness Plan (ERP) Number.
- setERPPatternPeriod(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the time duration for one complete cycle of a repeating ERP sequence..
- setERPPatternType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set In Data Item ERPPatternType (US), indicate whether ERP is unmodulated
ERP variations are Patterned, Non-Patterned, or Adaptive..
- setERPSequenceDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set In Data Item ERP SequenceDesc (US), enter the textual description of
the observed algorithm for the sequence of variation for the ERP..
- setERPStdDev(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the standard deviation associated with the ERP Value data set that was
used to calculate ERPMean..
- setERPStep(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the delta between the Most Probable observed ERP values of adjacent and
discrete ERPs..
- setERPValue(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPValues
-
Set the ERP values that represent 95% of the signal observed ERP values for
each discrete ERP value which were obtained from a statistical study of a
data set..
- setEstimatedExpansionCost(S70) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the estimated cost of the expansion..
- setEvaluation(TString) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set your best guess as to the cause of the interference..
- setExBlankingOn(TString) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set In Data Item ExBlankingOn (US), indicate if external blanking is
enabled..
- setExcluded(TString) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set "Yes" to indicate that the shape is to be excluded from the set.
- setExcluded(TString) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set "Yes" to indicate that the shape is to be excluded from the set.
- setExcluded(TString) - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Set "Yes" to indicate that the shape is to be excluded from the set.
- setExcluded(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.StageLocation
-
Set "Yes" to indicate that the shape is to be excluded from the set.
- setExcluded(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Set whether the referenced Location is included or excluded at this diagram
endpoint..
- setExclusive(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Set Yes if the assigned frequency should not be reused within the area of
exercise/operation..
- setExpansionTargetDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the date this expansion will be activated (i.e., the date the system
will require the additional radio frequencies)..
- setExpirationDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the date at which the dataset will expire.
- setExpirationDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the date at which the dataset will expire.
- setExpirationDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the date at which the dataset will expire.
- setExpirationDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Set the date this note goes out of force..
- setExpirationDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the date at which the dataset will expire.
- setExpirationDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the date at which the dataset will expire.
- setExpirationDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the date at which the dataset will expire.
- setExpirationDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set the date at which the dataset will expire.
- setExpirationDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the date at which the dataset will expire.
- setExpirationDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date and UTC time that this Assignment will expire.
- setExpirationDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set In Data Item ExpirationDateTime, In Data Item ExpirationDateTime, enter
the date at which the dataset will expire, formatted as yyyy-mmddThh:
mm:ssZ (year-month-day, "T" for time, hour:minute:seconds Zulu).
- setExplainInformationTypeX(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a reference to a Remark that describes the Type of Information.
- setExplainModulationTypeX(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a reference to a Remark that describes the Type of Modulation.
- setExplainNatureOfSignalX(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a reference to a Remark that describes the Nature of Signal.
- setFallTime(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time required for a pulse to fall from 90% to 10 percent of the
mean peak amplitude of its voltage waveform/envelope..
- setFallTime(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the pulse fall time from 90 to 10 percent of the pulse..
- setFASNumber(S50) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the Interdepartment Radio Advisory Committee (IRAC) Frequency
Assignment Subcommittee (FAS) identifier assigned by NTIA..
- setFax(TString) - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Set "Yes" if the number is for a telefax.
- setFCCAcceptanceNum(S50) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the Federal Communication Commission (FCC) ID of FCC authorised
equipment..
- setFCCAcceptanceNum(S50) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the Federal Communication Commission (FCC) ID of FCC authorised
equipment..
- setFCCFileNum(S22) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the file number assigned by the Federal Communications Commission
(FCC), issued to non-government stations operating on government
frequencies or government stations operating on nongovernment frequencies,
which is unique to each FCC license..
- setFeedlineLength(Altitude) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the length of the antenna feed line..
- setFeedlineLoss(dB) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the total loss of the antenna feed line..
- setFeedOrientation(S10) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Set the orientation of the feed when looking in the direction of the
boresight.
- setFeedType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Set the element used to "illuminate" the reflector for an antenna unit..
- setFERef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the dataset identifier of the ForceElement being deployed..
- setFFTType(S20) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the form of the Fast Fourier Transform used (e.g., Integral, Serial,
Discrete)..
- setFieldedStatus(TString) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the current stage of the RFSystem..
- setFilter(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set a brief description of the type of the output filter..
- setFirstName(S30) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the first name of the contact individual..
- setFMDeviationCode(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the code that indicates the type of Root Mean Square (RMS) deviation
(multichannel or per-channel)..
- setFMPeakFreqDev(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the peak frequency deviation when analog modulation is employed..
- setFMPeakModulationIdx(UN5_3) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the peak modulation index (deviation ratio) when using analog frequency
or phase modulation..
- setFMRMSFreqDev(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the Root Means Square (RMS) frequency deviation when frequency
modulation (FM) is employed and the base band consists of
frequency-division multiplexed (FDM) channels or multiple subcarrier
signals..
- setFMSCNum(S14) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the assignment serial number as registered in the Frequency Management
Subcommittee (FMSC) Master Radio Frequency List (MRFL)..
- setFootnoteType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Set the type or source of the Footnote..
- setFreq(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Set the frequency at which the gain is expressed..
- setFreq(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.VSWR
-
Set the specific frequency at which the VSWR measurement was taken.
- setFreq(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Set the paired frequency for the repeater, duplex link or frequency
diversity capability..
- setFreq(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Set the subcarrier frequency..
- setFreqBlocking(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set if the frequency hopping system is capable of blocking certain
frequencies..
- setFreqConst(FreqOffset) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set a frequency offset (positive or negative)..
- setFreqFactor(UN3_1) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set a positive numeric multiplier of the carrier frequency.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Set the maximum value of the frequencies in the range.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntEfficiency
-
Set the maximum value of the frequencies in the range.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Set the maximum value of the frequencies in the range.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Set .
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the maximum value of the frequencies in the range.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the target frequency range maximum value.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set the maximum value of the frequencies in the range.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the frequency range maximum value planned for denial of use.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the frequency range maximum value planned for denial of use.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set the highest value of the curve frequency range.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Set the maximum value of the frequencies in the range.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the maximum value of the frequencies in the range.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the upper frequency of band.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Set the upper frequency of band.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Set the maximum value of the frequencies in the range.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the upper end of the range of RF values that represent 100% of observed
signals.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Set the maximum value of the frequencies in the range.
- setFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Set the maximum value of the frequencies in the range.
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Set the nominal frequency or minimum value of the frequency range..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntEfficiency
-
Set the nominal frequency or minimum value of the frequency range..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Set the nominal frequency or minimum value of the frequency range..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Set .
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the nominal frequency or minimum value of the frequency range..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the target discrete frequency, or frequency range minimum value..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set the nominal frequency or minimum value of the frequency range..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the discrete frequency, or frequency range minimum value, planned for
denial of use..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the frequency range minimum value planned for denial of use..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set the lowest value of the curve frequency range..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Set the nominal frequency or minimum value of the frequency range..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the nominal frequency or minimum value of the frequency range..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the lower frequency of band or discrete frequency..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Set the lower frequency of band or discrete frequency..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Set the nominal frequency or minimum value of the frequency range..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the lower end of the range of RF values that represent 100% of observed
signals..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Set the nominal frequency or minimum value of the frequency range..
- setFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Set the nominal frequency or minimum value of the frequency range..
- setFreqOffset(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Set the frequency differential from the subcarrier frequency..
- setFreqRest(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Set the dwell or pause frequency utilised while processing the subcarrier.
- setFreqSep(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Set the required minimum or exact frequency separation..
- setFreqSepType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Set if the stated frequency separation is an exact or minimum value..
- setFreqTolerance(UN18_6) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the drift in Hz or in ppm using the formula: Frequency tolerance (ppm)
= Maximum drift (Hz) / Center frequency (MHz).
- setFreqTolerance(UN18_6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the drift in Hz or in ppm using the formula: Frequency tolerance (ppm)
= Maximum drift (Hz) / Center frequency (MHz).
- setFreqToleranceUnit(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the units in which the Frequency Tolerance is expressed..
- setFreqToleranceUnit(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the units in which the Frequency Tolerance is expressed..
- setFrequencyActionOfficer(S3) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set a MILDEP code identifying the person or group responsible for the
frequency assignment..
- setFreqUse(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Set if the frequency range is used for transmit, receive, or both transmit
and receive..
- setFreqUse(TString) - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Set .
- setFreqUse(TString) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the intended usage of the frequency..
- setFrontToBackRatio(Unsigned_DB_5_2) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Set the front-to-back ratio of the main beam to the back lobe..
- setFunction(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set Data item Function is not used by US except when exchanging with NATO.
- setGain(dBi) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Set the antenna gain (in dBi - dB with reference to an isotropic source) in
the direction of maximum radiation.
- setGain(Signed_DB_5_2) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPatternPoint
-
Set the amount of gain for the direction relative to the main beam gain..
- setGeneric(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model..
- setGeneric(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model..
- setGeneric(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model..
- setGeoAltitude(DistSpace) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the altitude of the geostationary satellite, relative to Mean Sea Level
(MSL)..
- setGeoDescription(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set a textual description of the geographic locations where this equipment
will be used during this stage..
- setGeoNominalLon(Lon) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the longitude of the geostationary satellite in the following format:
dddmmss[.hh]H, where H represents "E" for East or "W" for West..
- setGPSAffected(TString) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set whether the interference affects GPS reception..
- setGpsNBL1Level(US_DBW) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the narrowband levels emitted by this system in the Navstar Global
Positioning System (GPS) 1164-1240 MHz band..
- setGpsNBL2Level(US_DBW) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the narrowband levels emitted by this system in the Navstar Global
Positioning System (GPS) 1559-1610 MHz band..
- setGpsWBL1Level(US_DBWHz) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the wideband levels emitted by this system in the Navstar Global
Positioning System (GPS) 1164-1240 MHz band..
- setGpsWBL2Level(US_DBWHz) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the wideband levels emitted by this system in the Navstar Global
Positioning System (GPS) 1559-1610 MHz band..
- setGuardBand(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the RF band between carriers which is not used.
- setHelpRequired(TString) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set whether the user needs technical assistance from another organisation
to solve the interference.
- setHopDwell(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the length of time the frequency hopping system dwells on a frequency..
- setHopRate(hops) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the rate at which the frequency hopping system hops from one frequency
to another frequency..
- setHorzAperture(Dimension) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the horizontal cross-section of the antenna radiation pattern in the
direction of highest gain..
- setHorzBwMax(Az) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the maximum horizontal beamwidth for beamwidths which vary with the
frequency.
- setHorzBwMax(US_Degrees) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the maximum angle of the horizontal component of the antenna mainbeam
measured at the half-power (-3 dB) point of its maximum horizontal width.
- setHorzBwMin(Az) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the minimum or nominal horizontal beamwidth..
- setHorzBwMin(US_Degrees) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the minimum angle of the horizontal component of the antenna mainbeam
measured at the half-power (-3 dB) point of its maximum horizontal width..
- setHorzDimension(Dimension) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the linear horizontal dimension of the antenna..
- setHorzScanRate(ScanRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the number of complete scans the antenna is capable of making each
minute..
- setHorzScanSector(Az) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the maximum horizontal sector the antenna can scan (enter 360 for a
full rotation)..
- setHorzScanSpeed(ScanSpeed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the number of degrees per second the antenna is capable of scanning.
- setHorzScanType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the antenna horizontal scanning capability..
- setHorzSidelobeAttenuation(Unsigned_DB_5_2) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the amount of suppression relative to the main beam gain of the
antenna..
- setHorzSidelobeAz(Az) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the direction of the sidelobe in reference to the direction of maximum
gain..
- setHorzSidelobeSuppressed(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set if the sidelobe has been suppressed.
- setHostComments(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CoordinationData
-
Set the Comments from the coordinating entity..
- setHours(Hours) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the hours of day [0-23] (UTC time) when the Assignment will be guarded
(monitored) or used for transmission..
- setHours(Hours) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the hours of a day [0-23] (UTC time) that the Force element is planned
for deployment..
- setHours(Hours) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the hours of a day [0-23] (UTC time)..
- setHours(Hours) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the hours of a day [0-23] (UTC time)..
- setIconPosLeft(US_Twips) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set the X coordinate of the icon in twips.
- setIconPosTop(US_Twips) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set the Y coordinate of the icon in twips." to read, "In Data Item
IconPosTop, enter the Y coordinate of the icon in twips.
- setIconType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set the type of icon for the diagram endpoint..
- setIdentifier(S20) - Method in class us.gov.dod.standard.ssrf._3_1.common.CaseNum
-
Set the case number..
- setIdentifier(S50) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set any alternate identifier for the document as needed..
- setIdentifier(S255) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Set an identifier for this Footnote (e.g., US2, 5.441).
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set a unique identifier for each Data Item in the Dataset.
- setIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set a unique identifier for each Data Item in the Dataset.
- setIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
Set a unique index for each External Reference used by this Dataset.
- setIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.common.Remarks
-
Set a unique index for each Remark used by this Dataset.
- setIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set a unique integer index for the current ellipse within the geometric
shape..
- setIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set the sequential index of a Point within the referenced Location.
- setIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Set a unique integer index for the current ellipse within the Location..
- setIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set .
- setIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set a unique index for each Curve used by this Dataset.
- setIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set a unique index for each Comment used by this Dataset.
- setIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Set a unique index for each Footnote used by this Dataset.
- setIFMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Set the maximum value of the intermediate frequencies.
- setIFMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Set the nominal intermediate frequency or minimum value of the intermediate
frequency range..
- setImageRejection(Rejection_DB1) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the ratio of the image frequency signal level required to produce a
specified output, to the desired signal level required to produce the same
output.
- setInBand(TString) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set "Yes" if this frequency range is in compliance with the applicable
Frequency Allocation Table.
- setInfoDataRate(InfoDataRate) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the information data rate..
- setInfoTransferRequirement(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the required character rates, data rates, and circuit
quality/reliability of the system..
- setInitialCost(S70) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the estimated initial cost, in US dollars, of the system/equipment..
- setInitialCost(S70) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the estimated initial cost, in US dollars, of the system/equipment..
- setInitialCostDesc(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the explanation of how the estimated initial cost for the system was
calculated..
- setInstantRFBW03(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the transmitter pulse bandwidth (burst or instantaneous) measured at
the 3 dB points (min).
- setInstantRFBW06(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the transmitter pulse bandwidth (burst or instantaneous) measured at
the 6 dB points (min).
- setInstantRFBW10(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the transmitter pulse bandwidth (burst or instantaneous) measured at
the 10 dB points (min).
- setInstantRFBW20(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the transmitter pulse bandwidth (burst or instantaneous) measured at
the 20 dB points (min).
- setIntermediateFunction(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set .
- setIntermodEffect(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set .
- setIntermodEffect(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set .
- setIntermodPct(Percent) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set .
- setIntermodPct(Percent) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set .
- setIntermodRejection(Rejection_DB2) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the rejection of spurious emissions involving the mixing of two or more
signals.
- setInternationalDesignator(S20) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the externally-assigned International Designator for the satellite..
- setIntfDescr(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set In Data Item IntfDescr, describe the interference.
- setIntfPeriod(TString) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set how often the interference is experienced..
- setIntfStartDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the date/time the interference was first perceived..
- setIntfStopDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the date/time the interference ceased..
- setIRACNumber(S50) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the Interdepartment Radio Advisory Committee (IRAC) document number of
the NTIA Certification of Spectrum Support document.
- setIsAttached(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set if the document, file or other "external" information is stored in
attachment to this message..
- setIsClassified(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set if the referenced information contains any classified data..
- setIsRelinquished(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Set the Yes if this is an existing assignment to be relinquished by the
trunked land mobile system.
- setITURegComments(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set amplifying comments related to registering an assignment with the
International Telecommunication Union (ITU) Radiocommunication Bureau
(BR)..
- setITURegDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the date the frequency assignment was registered with the International
Telecommunication Union (ITU) Radiocommunication Bureau (BR)..
- setITURegNum(US10) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the registration number assigned by the International Telecommunication
Union (ITU) Radiocommunication Bureau (BR)..
- setITURegStatus(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the status of the Assignment ITU-R registration..
- setITUWaiver(TString) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set if this is a satellite system that is exempt from submitting
notification to the Radiocommunication Bureau..
- setJ12Number(S15) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Set the US Military Communications-Electronics Board (MCEB) identifier of a
superseded or related application..
- setJCACallSign(S10) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Set In Data Item JCACallSign (US), enter the unique net identifier for the
JCA.
- setJCAFreq(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Set In Data Item JCAFreq (US), enter the frequency assigned to the JCA.
- setJCALevel(UN2) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Set In Data Item JCALevel (US), enter the required level of authorisation
for the jamming plan..
- setJCALevel(UN2) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the level of joint control authorization (JCA) required for the jamming
plan..
- setJCAState(TString) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Set an indication of the authorization condition for radiation of a jamming
plan..
- setJitterCapable(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set In Data Item JitterCapable (US), indicate whether the mode of the pulse
stream is jitter capable..
- setJobTitle(S100) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Set the title or position of the comment author..
- setJustification(S255) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set a description of the justification of why the JRFL entry is required,
to support the spectrum manager..
- setJustifyShortRiseTime(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set an operational justification for short pulse rise time.
- setKeyLoadProcedure(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the sequence pattern for initializing the jamming equipment..
- setKeysAngle(Az180) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the keying angle for the digital/analog/hybrid data stream..
- setKeysDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set a text description of the keying format for the digital/analog/hybrid
data stream..
- setLastChangeBy(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- setLastChangeDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the date and UTC Time the dataset was last modified.
- setLastName(S30) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the last name of the contact individual..
- setLastObservedBy(S50) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the identifier of the person or entity who last observed this signal
configuration..
- setLastObservedBy(S50) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the identifier of the person or entity who last observed this Dataset.
- setLastReviewBy(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- setLastReviewDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the last date that the dataset was reviewed.
- setLastReviewedBy(S50) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the identifier of the person who last reviewed this configuration..
- setLastReviewedDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the date and time, based on Greenwich Mean Time (GMT), the
configuration was thoroughly reviewed..
- setLat(Lat) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the geographical latitude (degrees, minutes, seconds and hemisphere N
or S) of the Point or center of the Ellipse.
- setLat(Lat) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set the geographical latitude (degrees, minutes, seconds and hemisphere N
or S) of the Point or center of the Ellipse.
- setLat(Lat) - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Set the geographical latitude (degrees, minutes, seconds and hemisphere N
or S) of the Point or center of the Ellipse.
- setLat(Lat) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the geographic latitude of the target location, including hemisphere
(H).
- setLaunchDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the date of the satellite launch..
- setLaunchLocRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
- setLaunchStatus(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the status of the satellite..
- setLeadType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Set the type of device used for conducting or guiding the radio-frequency
energy from the transmitter or receiver to the antenna (e.g., continuous
waveguide)..
- setLegacyNum(S20) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Set a legacy reference number associated with the assigned frequency..
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set one or more special handling instructions in sentence format, not code
format.
- setLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set one or more special handling instructions in sentence format, not code
format.
- setLevel(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Set the level of nomenclature (primary, nickname, etc)..
- setLevel(CurvePointLevel) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.CurvePoint
-
Set a dB value (refer to data element Curve for use instructions)..
- setLevel3Auth(TString) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set In Data Item Level3Auth (US), indicate if a request should go directly
to third-level authorization.
- setLineCoding(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Set the format used to represent binary digit sequencing when digital
modulation is used..
- setLinkID(S100) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set a unique identifier for the link.
- setLinkName(S25) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set a human readable name of the link..
- setListSerialNum(S12) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the agency list serial number of a Government Master File (GMF) record
representing a group or area assignment.
- setLoadsetRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
- setLobeID(S10) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Set a unique (within the AntMode) identifier for the Antenna lobe..
- setLobeName(S25) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Set a name for the Antenna lobe.
- setLobeSymmetric(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Set In Data Item LobeSymmetric (US), indicate whether the sidelobe is
symmetric..
- setLobeValueAngleAccuracy(US_Degrees90) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the measurement accuracy of the LobeValueAngle(s) in degrees.
- setLobeValueAngleHorz(Az180) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the azimuth angle between the sidelobe LobeValueLevel and the mainbeam
maximum power level..
- setLobeValueAngleVert(Az180) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the vertical angle between the sidelobe LobeValueLevel and the mainbeam
maximum power level..
- setLobeValueID(S10) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set a unique (within the AntLobe) identifier for the Antenna lobe
measurement..
- setLobeValueLevel(US_DB150) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the ratio of the mainbeam power level to the sidelobe power level,
expressed as a positive value in dB..
- setLobeValueLevelAccuracy(US_DB90) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the measurement accuracy of the LobeValueLevel value in dB.
- setLobeValueName(S25) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set a name for the Antenna lobe measurement..
- setLocale(Locale) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Set the Serial number Country part (REQUIRED).
- setLocale(Locale) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Set the Serial number Country part (REQUIRED).
- setLocalEventID(S20) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the local event ID..
- setLocationExcluded(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Set "Yes" to indicate that the LocSatRef is to be excluded from the
location set for the current station.
- setLocationRadius(DistSpace) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Set the radius associated with the Location to produce a circle.
- setLocationRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the serial of the referenced Location..
- setLocationRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the unique reference of an existing Location dataset that describes the
target location.
- setLocationRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
- setLocationRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
- setLocSatRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
- setLocSatRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.StageLocation
-
- setLocSatRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
- setLOFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Set the maximum value of the LO frequencies.
- setLOFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Set the nominal LO frequency or minimum value of the LO frequency range..
- setLon(Lon) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the geographical longitude (degrees, minutes, seconds, and hemisphere E
or W) of the Point or center of the Ellipse.
- setLon(Lon) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set the geographical longitude (degrees, minutes, seconds, and hemisphere E
or W) of the Point or center of the Ellipse.
- setLon(Lon) - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Set the geographical longitude (degrees, minutes, seconds, and hemisphere E
or W) of the Point or center of the Ellipse.
- setLon(Lon) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the geographical longitude of the target location, including hemisphere
(H).
- setLowestUsableChannel(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Set the center frequency of the lowest channel usable within this
transmitter frequency range..
- setMajorFunction(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set the major (or primary) function of the frequency assignment..
- setMaxActiveFrames(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the maximum number of active frames (data blocks currently in use
directing equipment functionality) for a specific loadset..
- setMaxBitRate(BitRate) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Set the maximum bit rate in kilobits per second applicable to digital
communications systems.
- setMaxCls(TString) - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Set the highest classification that can be used for the email address..
- setMaxCls(TString) - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Set the highest classification that can be used on the network.
- setMaxDevRatio(UN5_3) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the deviation ratio data applicable to frequency- or phase-modulation
equipment.
- setMaxGain(dB) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the processing gain..
- setMaxPower(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the maximum level of input power..
- setMaxReactiveFrames(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the maximum number of reactive frames (data blocks planned to direct
equipment functionality in response to a stimulus) for a specific loadset..
- setMessageRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
- setMinPointAngle(Az180) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Set the minimum vertical pointing angle for satellite ground station
antennas..
- setMinSeparation(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Set the minimum frequency separation required at one transmitter or
receiver location..
- setMinutes(MinSec) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the minutes of an hour (0-59) when the Assignment will be guarded
(monitored) or used for transmission..
- setMinutes(MinSec) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the minutes of an hour [0-59] that the Force element is planned for
deployment..
- setMinutes(MinSec) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the minutes of an hour [0-59]..
- setMinutes(MinSec) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the minutes of an hour [0-59]..
- setMission(S100) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the task expected to be accomplished by the loadset..
- setMissionCode(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the mission code representing the primary mission of the Force Element
(e.g.,Training, Finance, etc)..
- setModAllowedBy(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- setModeID(S20) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set a short name for the mode; this name should be a meaningful
identification of the mode, but it can also be automatically generated in
some systems.
- setModeID(S20) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
Set the unique name of an AntMode of the Antenna specified in the
corresponding Serial field.
- setModeID(S20) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxModeRef
-
Set the unique identifier of a TxMode of the transmitter in this
configuration.
- setModeID(S20) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set a short name for the mode; this name should be a meaningful
identification of the mode, but it can also be automatically generated.
- setModeID(S20) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the unique identifier of a TxMode of the transmitter in this
configuration.
- setModeName(S40) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set .
- setModeName(S40) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set a short name for the mode..
- setModeName(S40) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set a short name for the mode..
- setModeUse(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set In Data Item ModeUse, indicate if the mode is used for transmit,
receive, or both transmit and receive..
- setModFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the maximum modulating frequency: - for a transmitter, measured on the
high side of the spectrum signature at the -3 dB point before the baseband
signal begins the up-conversion process; - for a receiver, frequency that
can be recovered and demodulated by the receiver.
- setModFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the minimum modulating frequency measured: - for a transmitter, on the
low side of the spectrum signature at the -3 dB point before the baseband
signal begins the up-conversion process; - for a receiver, at the -3 dB
point on the low frequency side of the receiver baseband, after detection
but prior to de-multiplexing or demodulation..
- setModulationType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the type of modulation..
- setMonths(Months) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the month of year [1-12] when the Assignment will be guarded
(monitored) or used for transmission..
- setMonths(Months) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the month of year [1-12] that the Force element is planned for
deployment..
- setMonths(Months) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the month of year [1-12]..
- setMonths(Months) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the month of year [1-12]..
- setMOPAdaptiveDriverDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set the condition which controls, or can be associated with, the signal MOP
variations..
- setMOPAdaptiveDriverRuleDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set the rule which describes the signal MOP variations..
- setMOPAMPercentModulation(US_Percent2) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set the AM Percent Modulation is the ratio (expressed as a percentage)
between the amplitude variation and the maximum amplitude.
- setMOPChangeRateAM(US_MOPChgAm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPChangeRateAM (US), enter the change in amplitude
within the pulse.
- setMOPChangeRateCW(US_MOPChgFm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPChangeRateCW (US), enter the change in continuous
wave frequency within the pulse.
- setMOPChangeRateFM(US_MOPChgFm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPChangeRateFM (US), enter the change in frequency
within the pulse.
- setMOPChangeRatePM(US_PhaseAngleRate) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPChangeRatePM (US), enter the change in phase angle
within the pulse.
- setMOPContinuous(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPContinuous (US), indicate whether MOP or CW
modulation is Discrete or Continuous..
- setMOPDutyCycle(Percent) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set In Data Item US:MOPDutyCycle (US), enter as a percentage, the minimum
or nominal ratio of the pulse duration to the pulse period..
- setMOPDutyCycle(Percent) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US:MOPDutyCycle (US), enter as a percentage, the minimum
or nominal ratio of the pulse duration to the pulse period..
- setMOPDutyCycle(Percent) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPDutyCycle (US), enter as a percentage, the minimum
or nominal ratio of the pulse duration to the pulse period..
- setMOPFlyBackInterval(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPFlyBackInterval (US), enter the time duration
between the end of a continuous (linear) sweep and the beginning of the
next continuous (linear) sweep.
- setMOPID(S10) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPID (US), enter a unique identifier (within the
TxMode) for the MOP data..
- setMOPMeanValueAM(Signed_DB_5_2) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPMeanValueAM (US), enter the average amplitude for a
signal which changes on a non-patterned basis within a pulse.
- setMOPMeanValueCW(US_MOPFm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPMeanValueCW (US), enter the average continuous wave
frequency for a signal which changes on a non-patterned basis within a
pulse.
- setMOPMeanValueFM(US_MOPFm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPMeanValue (US), enter the average frequency for a
signal which changes on a non-patterned basis within a pulse.
- setMOPMeanValuePM(US_PhaseAngle) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPMeanValue (US), enter the average phase angle for a
signal which changes on a non-patterned basis within a pulse.
- setMOPNumElements(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPNumElements (US), enter the number of discrete
FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any
repeated values are counted each time).
- setMOPNumElements(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set In Data Item US:MOPNumElements (US), enter the number of discrete
FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any
repeated values are counted each time).
- setMOPNumElements(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US:MOPNumElements (US), enter the number of discrete
FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any
repeated values are counted each time).
- setMOPNumElements(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPNumElements (US), enter the number of discrete
FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any
repeated values are counted each time).
- setMOPOffTime(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPOffTime (US), enter the duration of the state of the
modulated waveform with the absence of energy..
- setMOPOnTime(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPOnTime (US), enter the duration of the one on-time
related to the binary form of amplitude modulation called on-off keying..
- setMOPPatternName(S50) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item MOPPatternName (US), enter a freeform text name for the
pattern (e.g., Phase Alpha)..
- setMOPPatternPeriod(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPPatternPeriod (US), enter the duration of one
complete cycle of Frequency, Phase or Amplitude variations for a signal
which changes on a patterned basis, within a pulse, for pulsed signals..
- setMOPPatternType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPPatternType (US), indicate whether MOP or CW
characteristics are Patterned, Non-Patterned, Adaptive, or Unmodulated..
- setMOPPulseDurationLink(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPPulseDurationLink (US), enter the Discrete PD value
which is associated with the selected MOP name (i.e., the name in the MOP
Pattern List)..
- setMOPRepetionInterval(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set the overall interval which may include multiple Sweep Repetition
Intervals (SRI).
- setMOPRepetionInterval(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set the overall interval which may include multiple Sweep Repetition
Intervals (SRI).
- setMOPRepetionInterval(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set the overall interval which may include multiple Sweep Repetition
Intervals (SRI).
- setMOPSequenceDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US:MOPSequenceDesc (US), enter a text description of the
MOP sequence..
- setMOPStepAM(Unsigned_DB_5_2) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set In Data Item US:MOPStepAM (US), enter the difference between adjacent
amplitude discrete power values, within a pulse.
- setMOPStepAM(Unsigned_DB_5_2) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US:MOPStepAM (US), enter the difference between adjacent
amplitude discrete power values, within a pulse.
- setMOPStepAM(Unsigned_DB_5_2) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPStepAM (US), enter the difference between adjacent
amplitude discrete power values, within a pulse.
- setMOPStepCW(US_MOPFm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set In Data Item US:MOPStepCW(US), enter the difference between adjacent
continuous wave frequency discrete values, within a pulse.
- setMOPStepCW(US_MOPFm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US:MOPStepCW(US), enter the difference between adjacent
continuous wave frequency discrete values, within a pulse.
- setMOPStepCW(US_MOPFm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPStepCW(US), enter the difference between adjacent
continuous wave frequency discrete values, within a pulse.
- setMOPStepFM(US_MOPFm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set In Data Item US:MOPStepFM (US), enter the difference between adjacent
frequency discrete values, within a pulse.
- setMOPStepFM(US_MOPFm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US:MOPStepFM (US), enter the difference between adjacent
frequency discrete values, within a pulse.
- setMOPStepFM(US_MOPFm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPStepFM (US), enter the difference between adjacent
frequency discrete values, within a pulse.
- setMOPStepPM(US_PhaseAngle) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set In Data Item US:MOPStepPM (US), enter the difference between adjacent
phase discrete values, within a pulse.
- setMOPStepPM(US_PhaseAngle) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US:MOPStepPM (US), enter the difference between adjacent
phase discrete values, within a pulse.
- setMOPStepPM(US_PhaseAngle) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPStepPM (US), enter the difference between adjacent
phase discrete values, within a pulse.
- setMOPSweepPeriod(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPSweepPeriod (US), enter the time duration from a
point in the RF sequence (or continuous variation) to the like point in the
next repeating RF sequence (or continuous variation)..
- setMOPTimeBWProduct(US_UN16_9) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPTimeBWProduct (US), enter the time-bandwidth product
of the waveform (actual PD times instantaneous bandwidth)..
- setMOPType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item MOPType (US), indicate if the information imprinted on the
pulse is modulated by amplitude (AM), frequency (FM), phase (PM), or is a
continuous wave (CW)..
- setMOPValueAM(Signed_DB_5_2) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Set In Data Item US:MOPValueAM (US), enter specific data that describes the
Amplitude (AM) features of a signal impressed on a Pulse.
- setMOPValueCW(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Set In Data Item US:MOPValueCW (US), enter specific data that describes the
Continuous Wave (CW) features of a signal impressed on a Pulse.
- setMOPValueFM(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Set In Data Item US:MOPValueFM (US), enter specific data that describes the
Frequency (FM) features of a signal impressed on a Pulse.
- setMOPValueMaxAM(Signed_DB_5_2) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMaxAM (US), enter the maximum change in
amplitude within the pulse.
- setMOPValueMaxCW(US_MOPFm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMaxCW (US), enter the maximum change in
continuous wave frequency within the pulse.
- setMOPValueMaxFM(US_MOPFm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMaxFM (US), enter the maximum change in
frequency within the pulse.
- setMOPValueMaxPM(US_PhaseAngle) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMaxPM (US), enter the maximum change in phase
angle within the pulse.
- setMOPValueMinAM(Signed_DB_5_2) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMinAM (US), enter the minimum change in
amplitude within the pulse.
- setMOPValueMinCW(US_MOPFm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMinCW (US), enter the minimum change in
continuous wave frequency within the pulse.
- setMOPValueMinFM(US_MOPFm) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMinFM (US), enter the minimum change in
frequency within the pulse.
- setMOPValueMinPM(US_PhaseAngle) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMinPM (US), enter the minimum change in phase
angle within the pulse.
- setMOPValuePM(US_Degrees) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Set In Data Item US:MOPValuePM (US), enter specific data that describes the
Phase (PM)features of a signal impressed on a Pulse.
- setMotionType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the general category for the movement of a scanning or tracking
antenna..
- setMUXLevel(Signed_DB_5_2) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set In Data Item US:MUXLevel (US), enter the signal power in dB referenced
to the baseband carrier for the companding of the multiplexed signal..
- setMUXScheme(S100) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set In Data Item US:MUXScheme (US), enter a freetext description of the
multiplexing algorithm..
- setName(S30) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Project
-
Set the name of the project..
- setName(S100) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Manufacturer
-
Set the name of the company that manufactured the equipment..
- setName(S100) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Set the standard military nomenclature.
- setName(S50) - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Set the name of this channel (e.g., "Video carrier, Sound carrier, Nicam
Sound carrier")..
- setName(S100) - Method in class us.gov.dod.standard.ssrf._3_1.ChannelPlan
-
Set the name of this channel plan (e.g., "Plan for Wireless Microphones in
the Band 162-174 MHz")..
- setName(S50) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the name of the loadset..
- setName(S50) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set the identifying term for the timing deconfliction protocol.
- setName(S100) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the name of the location..
- setName(S40) - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Set a human-readable name for the message..
- setName(S100) - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Set the externally-assigned name of the note..
- setName(S100) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set an alternate name or nickname for the organisation..
- setName(S100) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set In Data Item Name (US), enter a unique name (within the parent
RadiationPlan) for the Jamming Plan..
- setName(S100) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set In Data Item Name (US), enter a descriptive name for the Radiation
Plan..
- setName(S50) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the name or function of the Role.
- setName(S50) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
Set the name of an associated earth station..
- setName(S15) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set a human-readable name of a diagram endpoint, or Station..
- setName(S10) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Set the name of the tone.
- setNATOPooledFrequencyCode(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the Type Special Assignment for the frequency assignment..
- setNATOPooledFrequencyNum(UN4) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the a Frequency Management Sub-committee (FMSC) assigned code number
identifying the type and nationality of a frequency pool..
- setNavAidsChannel(NavAidChnl) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set In Data Item NavAidsChannel, for TACAN and DME assignments, enter the
channel number of the allocated pair of radio frequencies assigned for use
by Air / Ground / Air radionavigation facilities such as: TACAN, VORTAC,
DME, MLS/DME, etc ...
- setNBFreq(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.NarrowBandPlanning
-
Set the transition frequency to comply with narrow band transition plans..
- setNecessaryBw(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Emission
-
Set the necessary bandwidth which is defined as the value in MHz, for a
given class of emission, the width of the frequency band which is just
sufficient to ensure the transmission of information at the rate and with
the quality required under specified conditions.
- setNecessaryBw(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the necessary bandwidth which is defined as the minimum width of the
frequency band sufficient to ensure the transmission of information at the
required rate and quality.
- setNecessaryBw(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the necessary bandwidth which is defined as the minimum width of the
frequency band sufficient to ensure the transmission of information at the
required rate and quality.
- setNecessaryBwMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigEmission
-
Set the maximum necessary bandwidth in the case of a range of values.
- setNecessaryBwMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigEmission
-
Set the necessary bandwidth which is defined as the value in MHz, for a
given class of emission, the width of the frequency band which is just
sufficient to ensure the transmission of information at the rate and with
the quality required under specified conditions.
- setNetCircuitsAffected(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the network circuits affected by the interference..
- setNetNum(NetNumber) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the net number in the format PXXXnn where 'P' is either A for HAVE
QUICK II or B for SATURN, XXX is in the range 000 through 999, and nn is
one of the following four modes: 00 - sub-band hopping mode (only for
SATURN), 25 - full-band hopping mode (HAVE QUICK II and SATURN), 50 -
SATURN mode, and 75 - SATURN mode.
- setNetsAffected(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the networks affected by the interference..
- setNetworkName(S50) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the name of the network to which the satellite belongs..
- setNoiseFigure(dB) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the ratio of the output noise power to the portion of noise power
attributable to thermal noise in the input termination at 290 Kelvins.
- setNoiseTemp(Kelvins) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the absolute temperature of a passive system having an available noise
power per unit bandwidth at a specified frequency equal to that of the
actual terminals of a network.
- setNonGeoApogee(DistSpace) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the maximum altitude of the non-geostationary satellite relative to
Mean Sea Level (MSL)..
- setNonGeoInclination(Elev) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the angle determined by the plane containing the orbit of the
non-geostationary satellite and the equatorial plane of the earth..
- setNonGeoNumSatellites(UN4) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the number of non-geostationary satellites in a system having similar
orbital characteristics..
- setNonGeoPerigee(DistSpace) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the minimum altitude of the non-geostationary satellite relative to
Mean Sea Level (MSL)..
- setNonGeoPeriod(minutes) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the time required for the non-geostationary satellite to make one
complete orbit around the earth..
- setNoteRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.RecordNote
-
- setNSEPUse(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the U.S.
- setNTIACoordinationRequired(TString) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set if this application requires coordination with the National Authority
for approval.
- setNTIASpaceData(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the Space and terrestrial information as defined by section 10.8 of the
NTIA Manual and not captured in other more specific data fields..
- setNum(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the quantity of Force Element referenced in FERef..
- setNumAreaUnits(UN9) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the maximum number of units (equipment) that will be operating
simultaneously in the same area of operation.
- setNumAreaUnits(UN9) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the maximum number of units (equipment) that will be operating
simultaneously in the same area of operation.
- setNumBeamPositionsPerScan(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the number of beam positions (aka., dwells) per scan cycle.
- setNumBeamPositionsTotal(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the total number of unique array beam positions resulting from the
frequency steps of a frequency scanning, phase changes, in phase scanning,
or discrete time delays in time delay steering..
- setNumBeamsPerRaster(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the number of beam positions necessary to complete one bar of the
raster scan..
- setNumber(S50) - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Set the area code, telephone/telefax number (including the extension if
necessary) of individual or contact organisation..
- setNumCositedUnits(UN9) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the maximum number of units (equipment) that will be operating
simultaneously in the same cosite environment.
- setNumCositedUnits(UN9) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the maximum number of units (equipment) that will be operating
simultaneously in the same cosite environment.
- setNumEquip(UN9) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the total number of units to be built, procured or used during this
stage..
- setNumFreq(UN4) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Set the number of frequencies required..
- setNumFreqs(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the number of discrete frequencies or frequency ranges associated with
this Jamming Plan.
- setNumFreqsPerHopset(UN4) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the number of frequencies contained in a hop set..
- setNumFreqsRequired(UN10) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the total number of frequencies required..
- setNumHopsets(UN4) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the number of frequency hopsets employed when a system uses frequency
hopping spread spectrum modulation techniques, including hybrid direct
sequence and frequency hopping..
- setNumMobileUnits(UN9) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the number of mobile units (equipment).
- setNumMobileUnits(UN9) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the number of mobile units.
- setNumObsPositions(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the number of discrete ERP dwell/pulse groups, for a pulsed signal, or
ERP values at a constant ERP value, for a continuous wave (CW) signal,
observed in a signal which contains multiple and discrete ERP values that
change in a repeating ERP sequence..
- setNumObsValues(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the number of discrete ERP values observed for a signal which contains
multiple and discrete ERP values..
- setNumPDPositions(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the number of pulses (i.e., positions) in a repeating sequence of
pulses which has multiple (2 or more) PD values..
- setNumPDValues(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the number of discrete PD values (i.e., elements) in a repeating
sequence of pulses which has multiple (2 or more) PD values..
- setNumPresetChannels(UN8) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Set the number of preset channels available..
- setNumPresetChannels(UN8) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Set the number of preset channels available..
- setNumPRIElements(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the number of discrete PRI values in a repeating sequence of discrete
PRIs..
- setNumPRIPositions(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the number of time intervals between pulses or pulse groups, or the
number of PRI dwell groups, in a repeating PRI sequence which uses discrete
PRI values..
- setNumRastersPerCycle(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the number of 360 degree scans (aka, turns) a component of a scan makes
in the time it takes the Primary Scan to complete one complete cycle/scan..
- setNumRepeaters(UN7) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the total number of repeaters in the trunked land mobile system..
- setNumRFChannels(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the number of channels into which the RF range of the emitter is
divided..
- setNumRFElements(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the number of discrete RFs (channels) a multiple RF signal contains..
- setNumRFPositions(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the number of RF values in a signal RF sequence before it repeats..
- setNumRFSimultaneous(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set The number of frequencies simultaneously used by the emitter..
- setNumScanPositions(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the number of discrete values observed in a single repeating scan
period sequence..
- setNumScanValues(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the number of discrete values observed in multiple repeating scan
period sequences..
- setNumSideTones(UN5) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the number of side tone frequencies for the sidetones modulating the
carrier individually..
- setNumStates(UN5) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Set the total number of states, e.g., 4 for 4-ary Phase Shift-Keying, 64
for 64 level Quadrature AM..
- setNumStations(UN9) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.SysOfStation
-
Set the total number of stations associated with the Assignment.
- setNumSubCarriers(UN5) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the number of subcarrier frequencies for the subcarriers modulating the
carrier individually..
- setNumSubpulses(UN10) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the total number of subpulses (chips) contained in a radar coded pulse.
- setNumSystems(UN9) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the total number of systems that are expected to use this Assignment..
- setNumTiltAngleElements(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the number of unique discrete tilt angle values..
- setNumTiltAnglePositions(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the number of discrete Polarisation Tilt Angles used in a repeating
Polarisation Tilt Angle sequence..
- setNumUsers(UN9) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the number of users supported by the configuration.
- setNumUsers(UN10) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the total number of users of the trunked land mobile system..
- setObjectNum(S20) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the USSPACECOM-assigned space object identification number..
- setObservedFirstDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the date and time, based on Greenwich Mean Time (GMT), the subject
signal was first collected..
- setObservedFirstDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the date and time, based on Greenwich Mean Time (GMT), the subject
signal was first collected.
- setObservedLastDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the date and time, based on Greenwich Mean Time (GMT), the subject
signal was last collected..
- setObservedLastDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the date and time, based on Greenwich Mean Time (GMT), the subject
signal was last collected.
- setObservedPDValue(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Set the observed PD data believed to be valid..
- setObservedPRFValue(US_PPS) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Set the observed PRF data believed to be valid..
- setObservedPRIValue(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Set the observed PRI data believed to be valid..
- setObserveTime(US_Duration) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the time interval for the recording of received signals, in (0-999)
hours, (0-59) minutes, and (0-999,999,999) nanoseconds (hhh.mm.sssssssss).
- setOccBw(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the minimum bandwidth utilized to process 99.5% of the emission
spectra..
- setOccBwCalculated(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement..
- setOffset(FreqOffset) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.CurvePoint
-
Set a frequency difference (refer to data element Curve for use
instructions).
- setOffsetFreq(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the frequency offset relative to the center frequency of the channel..
- setOOBJustification(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the justification for out-of-band frequency use..
- setOOKPattern(S100) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set a text description of the on-off keying (OOK) pattern.
- setOperationalRFBW(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the delta (aka.
- setOperInvIntent(TString) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set if the system is intended for the DoD operational inventory..
- setOrbitType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the type of orbit..
- setOrg(S30) - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Set the publishing organization of the source document..
- setOrganisation(S50) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the name of the Organisation that published the Reference, if it cannot
be covered by a OrganisationRef.
- setOrganisation(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Set the serial number Organization code (OPTIONAL).
- setOrganisation(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Set the serial number Organization code (OPTIONAL).
- setOrigin(TString) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Set the country or organisation which is using the modified or new code..
- setOriginalAssignmentDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date the frequency assignment was originally authorized..
- setOriginatingAgency(S80) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the agency that originated the application..
- setOscillatorTuning(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Set the relationship between the local oscillator frequency and the RF
centre frequency..
- setOtherHarmonicLevel(dB) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the greatest out-of-band emission level at harmonic frequencies greater
than three times the fundamental frequency.
- setOutputDevice(S40) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the name of the output device.
- setOutputDeviceType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the type of the device.
- setOwner(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- setOwnerOrgRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
- setOwnerType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
Set the relationship of an individual or organization to the frequency
assignment..
- setOwningCountry(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the owning country or body of the ForceElement..
- setOwningOrganisationRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set a reference to the organisation that owns the ForceElement..
- setPairedASN(US12) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Set the agency serial number of the assignment that is paired with this
Assignment in a repeater, duplex link or frequency diversity capability..
- setPairedFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Set the nominal frequency or minimum value of the frequency range, for the
paired frequency or frequency range when the allotment is for a duplex
system..
- setPairedType(S20) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Set if the paired frequency is a transmitting repeater frequency, a
receiving repeater frequency, a duplex pairing, frequency diversity or
space diversity..
- setPDAdaptiveRuleDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the rule which describes the signal PD variations (aka.
- setPDContinuous(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set In Data Item PDContinuous (US), indicate whether pulse-to-pulse PD
variations are Discrete or Continuous.
- setPDDwellMax(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the maximum time duration for a complete dwell/group of pulses which
all have the same PD value.
- setPDDwellMin(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the minimum time duration for a complete dwell/group of pulses which
all have the same PD value..
- setPDExtremeMax(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the maximum PD value that represents 100% of observed values.
- setPDExtremeMin(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the minimum PD value that represents 100% of observed values..
- setPDMax(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the highest discrete PD value in a repeating sequence of pulses which
has multiple PD values
- setPDMax(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set for equipment having a capability for continuously variable PD over a
wide range.
- setPDMean(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the average PD of a signal which changes PD values on a non-patterned
basis..
- setPDMedian(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the PD value that the signal most often used, based on a statistical
study..
- setPDMin(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the delta lowest discrete PD value in a repeating sequence of pulses
which has multiple PD values.
- setPDMin(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set a numeric value indicating the characteristic pulse duration of the
equipment at the half-power (-3 dB) points.
- setPDPatternPeriod(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time duration for one complete cycle of a repeating sequence of
pulses which has multiple (2 or more) PD values; the time duration shall go
from a point in one cycle to a like point in the next cycle..
- setPDPatternType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set In Data Item PDPatternType (US), Indicate whether PD is unmodulated or
pulse-to-pulse PD variations are Patterned, Non-Patterned, or Adaptive..
- setPDSequenceDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set a freetext description of the PD Sequence..
- setPDStdDev(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the standard deviation of the data sample used to calculate PD Mean..
- setPDStep(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the Step between adjacent PD values; pertains to discrete PD
variations..
- setPDTypicalMax(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the upper end of the range of PD values that represents 95% of observed
values, from a statistical study.
- setPDTypicalMin(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the lower end of the range of PD values that represents 95% of observed
values, from a statistical study.
- setPerformanceEffects(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the effect the interference has on normal operations..
- setPeriod(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the general period on a daily basis when the frequency assignment
frequencies will be either guarded (monitored) or used for transmission..
- setPeriod(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set the enter the elapsed time between On and Off Triggers (i.e.,
Operations)..
- setPeriod(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set In Data Item Period (US),- enter how often the frequency is being
monitored or jammed..
- setPeriod(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Time
-
Set the period of usage..
- setPhArrayNumElements(UN5) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the number of antenna elements in the phased array antenna..
- setPhArrayNumMainBeams(UN3) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the number of main beams in the phased array antenna..
- setPhysicalUsage(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Set In Data Item PhysicalUsage (US), indicate the type of vehicle or other
entity that uses the equipment, or from which the subject signal emanates..
- setPlatform(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the type of platform..
- setPOCRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Set the reference to a Contact, Organisation, or Role responsible for this
status log entry or the recipient of the action..
- setPointingAzMax(Az) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the maximum antenna azimuth angle.
- setPointingAzMin(Az) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the starting azimuth if an azimuth range is reported; otherwise, enter
a single azimuth.
- setPointingElevMax(Elev) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the maximum antenna elevation angle.
- setPointingElevMin(Elev) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the minimum antenna elevation angle.
- setPointToMultiPoint(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set "Yes" if the diagram endpoint participates in point-to-multipoint
links.
- setPolarisationAngle(Az) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the angle of the electric field vector measured counter-clockwise from
the equatorial plane as referenced from the boresight or typical static
positioning of the antenna..
- setPolarisationDirection(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the direction in which the polarisation ellipse is mechanically
rotating.
- setPolarisationRotationRate(US_ScanRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the number of times per second that the polarisation ellipse
mechanically rotates through the same major axis tilt angle..
- setPolarisationSense(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the rotation direction of the radiated electromagnetic wave electric
field (E-field) vector (E) relative to the direction of propagation.
- setPolarisationType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the principal orientation of the electric field of the electromagnetic
wave for an antenna..
- setPolarisationType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the polarisation of the radio wave referenced to the direction of
propagation..
- setPolarisationType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the antenna polarisation planned for the desired jamming instance..
- setPortIsolation(dB) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the power ratio between the signal injected into one port and the power
returned by the other port ..
- setPostCode(S15) - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Set the zip code or postal code portion of the address..
- setPostCode(S15) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the zip code or postal code portion of the address..
- setPostDetectionFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the maximum post detection frequency at the baseband half-power point.
- setPostDetectionFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the maximum post detection frequency at the baseband half-power point..
- setPower(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Emission
-
Set the maximum authorised power in dBW, for the given class of emission..
- setPower(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the desired power value planned to be directed at the target..
- setPowerLimit(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the power limit of the transmissions in this configuration..
- setPowerLimit(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxModeRef
-
Set the power limit of this transmitter mode when in this configuration..
- setPowerMax(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Set the maximum transmitter power.
- setPowerMin(dBW) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Set the nominal transmitter power, or the minimum power in case of a range
of values..
- setPowerType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the power type code for carrier, mean, or peak envelope power emitted.
- setPowerType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Set the power type code for carrier, mean, or peak envelope power emitted.
- setPreferred(TString) - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Set a code "Yes" for the preferred address(es) and a code "No" for the
others.
- setPreferred(TString) - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Set a code "Yes" for the preferred number(s) and a code "No" for the
others..
- setPreselectionType(S60) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the type of preselection used in the receiver frontend..
- setPreviousSPSDocketNum(S12) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the IRAC Spectrum Planning Subcommittee (SPS) docket number of the NTIA
Certification of Spectrum Support for the existing trunked system..
- setPRFChangeRate(US_PRIChgRate) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the rate of change for PD variations expressed as PD change per unit of
time..
- setPRFExtremeMax(US_PPS) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the minimum Observed PRF in the signal sample.
- setPRFExtremeMin(US_PPS) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the minimum Observed PRF in the signal sample..
- setPRFMax(US_PPS) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the highest discrete PRI value (convert PRI to PRF) which are found in
a single intercept that contains the complete PRI characteristics for that
specific data set.
- setPRFMin(US_PPS) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the lowest discrete PRI value (convert PRI to PRF) which are found in a
single intercept that contains the complete PRI characteristics for that
specific data set.
- setPRFTypicalMax(US_PPS) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the upper end of the range of PRF values that represents 95% of
observed values, from a statistical study.
- setPRFTypicalMin(US_PPS) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the lower end of the range of PRF values that represents 95% of
observed values, from a statistical study.
- setPRIAdaptiveDriverDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the condition which controls or can be associated with the signal PRI
variations (aka, interpulse modulation changes)..
- setPRIAdaptiveRuleDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the rule which describes the signal PRI variations (aka, interpulse
modulation changes).
- setPRIAnomalousValues(S500) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set any regularly occurring signal values which do not fit in any of the
other PRI related fields.
- setPRIBasicClockPeriod(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the fundamental period of the emitter clock which is used to generate
the subject signal PRIs.
- setPRIChangeRate(US_PRIChgRate) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the PRI change per unit of time, measured over a significant portion of
the waveform.
- setPRIContinuous(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set In Data Item PRIContinuous (US), Indicate whether pulse-to-pulse PRI
variations are Discrete or Continuous.
- setPRICountdown(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the integer (aka, count or countdown) associated with the PRI Crystal
value to provide the Pattern Period..
- setPRICountdownKey(UN9) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the integer (aka, count or countdown) used to generate the PRI from the
PRI Crystal value..
- setPRIExtremeMax(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the maximum observed PRI value, from a statistical study of a 100% data
set.
- setPRIExtremeMin(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the minimum observed PRI value, from a statistical study of a 100% data
set..
- setPRIFramePeriod(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time difference between a point on the leading edge of the frame
marker (or an alternate pulse in the frame), to the similar point on the
leading edge of the frame marker (or the alternate pulse) in the
next/consecutive frame..
- setPRIFrameRate(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the rate of frame generation during the Pulse Repetition Interval.
- setPRIGroupPulseSpacing(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time difference between a point on the leading edge of the subframe
marker (or an alternate pulse in the subframe), to the similar point on the
leading edge of the subframe marker (or the alternate pulse in the
subframe) in the next/consecutive frame..
- setPRIGroupSpacing(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the PRI between two groups of pulses which both have constant but
different PRIs (aka, the PRI between consecutive PRI dwell groups)..
- setPrimaryFirmware(S50) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the mission-independent software that is "burned" and which stays
resident on the RF jamming hardware..
- setPrimaryStation(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set .
- setPrimaryStation(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set whether this station is the station of primary regulatory interest..
- setPRIMean(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the average PRI value for a signal which changes PRI values on a
non-patterned basis..
- setPRIMedian(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the observed PRI value that the signal most often used based on
statistical study of a data set..
- setPRIMedianCountdowns(S100) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the observed PRI Crystal Counts used to generate the PRIs used most
often by the signal, based on statistical study of a data set..
- setPriority(UN1) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Set a number from 0 to 9 that is used to influence the positioning of the
Assignment in the ordering of the assignment process, where 9 represents
the highest priority and 0 is the lowest priority..
- setPriority(US2) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the assigned priority code consisting of a letter followed by a number
in the range A1 through Z9, with A1 being the highest priority (all Taboo
nets should be assigned an A1 priority code).
- setPriority(TString) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set if this spectrum use is Primary, Secondary or Permitted, as defined by
the system use and the appropriate Administration Frequency Allocation
Table/guidance..
- setPriority(TString) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the relative priority of the service request..
- setPriority(TString) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set if this service is a primary or secondary use of this band.
- setPriority(TString) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Set if this service is a primary or secondary use of this band.
- setPRIPatternPeriod(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time duration for one complete cycle of a repeating PRI sequence..
- setPRIPatternType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set whether the PRI is unmodulated or pulse-to-pulse PRI variations are
Patterned, Non-Patterned, or Adaptive..
- setPRIPulsesPerGroup(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the number of pulses in a pulse group..
- setPRISequenceDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set a free text description of the PRI Sequence..
- setPRIStability(US_PPM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the variation of a mean PRI value measured from one time to another
time.
- setPRIStabilitySamplePeriod(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time interval used to determine the PRI stability value..
- setPRIStdDev(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the standard deviation associated with the data set used to calculate
the values entered in the PRI Mean fields.
- setPRIStep(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the delta between the Most Probable observed PRI values of adjacent and
discrete PRI..
- setPRISubframePeriod(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time difference between a point on the leading edge of the subframe
marker (or an alternate pulse in the subframe), to the similar point on the
leading edge of the subframe marker (or the alternate pulse in the
subframe) in the next/consecutive frame..
- setPRISubframeRate(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the number of subframes detected during each PRI Subframe period..
- setPRITimingShift(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the PRI timing shift value, on Emitters with repeated timing shifts of
a predictable magnitude, but not predictable timing..
- setPRITypicalMax(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the upper end of the range of PRI values that represent 95% of the
signal observed PRI values, from a statistical study of a data set.
- setPRITypicalMin(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the lower end of the range of PRI values that represent 95% of the
signal observed PRI values, from a statistical study of a data set..
- setProcessing(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set if the frequency assignment is to be approved at the national or
international level..
- setProcessingGainMax(dB) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the maximum ratio of the post processing signal-to-noise ratio to the
received signal-to-noise ratio.
- setProcessingGainMin(dB) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the minimum ratio of the post processing signal-to-noise ratio to the
received signal-to-noise ratio..
- setProperties(SSRFProperties) - Method in class us.gov.dod.standard.ssrf.SSRF
-
Set the SSRF Properties for this SSRF instance.
- setProperties(SSRFProperties, Object) - Static method in class us.gov.dod.standard.ssrf.SSRFUtility
-
Assign a SSRF Properties configuration to a SSRF object instance.
- setProperty(String, String) - Method in class us.gov.dod.standard.ssrf.SSRF
-
Set a SSRF property.
- setProtectionCode(TString) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set In Data Item ProtectionCode, indicate the type of JRFL entry..
- setPRRMax(PulseRate) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set for equipment having a capability for continuously variable PRR over a
wide range.
- setPRRMin(PulseRate) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the numeric value for the pulse repetition rate (PRR) of the equipment.
- setPulseChirpDurationMax(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the maximum duration (pulsewidth) of the chirp signal.
- setPulseChirpDurationMin(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the duration (pulsewidth) of the chirp signal..
- setPulseChirpFreqShift(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the difference between the starting and stopping frequency of a chirped
pulse signal..
- setPulseChirpRate(RFChgRate) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set for linear frequency modulation, the constant rate at which the radio
frequency of a pulse is increased throughout the width of the pulse..
- setPulseFreqDev(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set In Data Item PulseFreqDev, Enter, for FM pulse radars, the total
frequency shift during the pulse width..
- setPulseWidth(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set the collected EW channel dwell for the Chirped Signal..
- setQuality(UN1) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set an application-specific measure of the quality for the assigned
frequency.
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList"..
- setRadarProcessingGainMax(dB) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the maximum ratio of the post-processing signal-to-noise ratio to the
received signal-to-noise ratio.
- setRadarType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the type of radar..
- setRadioService(TString) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
Set the Radiocommunication Service associated with the frequency usage in
this configuration.
- setRanking(TString) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set the ranking level of the timing deconfliction protocol..
- setRatio(UN2_1) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.VSWR
-
Set the standing wave ratio referenced to the specific frequency, as a
number without unit (e.g., enter "2" to represent a ratio of 2:1)..
- setReason(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Set the reason linked to the Action performed on this dataset..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set a value that is most probably correct..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set a value that is most probably correct..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set a value that is most probably correct..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set a value that is most probably correct..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set a value that is most probably correct..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set a value that is most probably correct..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a value that is most probably correct.
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set a value that is most probably correct.
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set a value that is most probably correct..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a value that is most probably correct..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set a value that is most probably correct..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set a value that is most probably correct..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set a value that is most probably correct..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set a value that is most probably correct..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set a value that is most probably correct..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set a value that is most probably correct..
- setRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set a value that is most probably correct..
- setRedacted(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set In Data Item Redacted (US), indicate if any original, or authoritative,
data was omitted.
- setReferencedStage(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the spectrum certification stage associated with this information..
- setRefFreq(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Set .
- setRelatedAnalysisAndTestData(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set In Data Item RelatedAnalysisAndTestData (US), describe electromagnetic
compatibility studies, testing or analyses relevant to this system,
including documents currently in progress.
- setRelation(TString) - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
Set the relationship between the two organisations..
- setRelation(TString) - Method in class us.gov.dod.standard.ssrf._3_1.rfsystem.RelatedSystem
-
Set the relationship between the two systems..
- setRelinquishmentDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Set the expected date the existing assignment will be relinquished by the
trunked land mobile system..
- setRepeat(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set In Data Item Repeat (US), indicate if the attached file should be
repeatedly viewed / listened to..
- setRepeater(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set "Yes" for each receiver location when a station in the fixed or mobile
service is used primarily as a repeater..
- setReplacementInfo(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the name of the systems that are likely to be replaced by this system..
- setReplyingAuthority(S100) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the name of the organization providing the reply..
- setReplyingCountry(TString) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the code of the country providing the reply..
- setRequestForExpansion(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set if this application is a request for expansion..
- setRequestType(S50) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the request type.
- setRequired(TString) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set if a common timing deconfliction protocol is required for processing
the subject signal.
- setRequiredEffect(TString) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the desired effect of this service request..
- setRequiredPerformance(TString) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the desired effectiveness of the service request.
- setRequirement(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set any amplifying information on the requirement..
- setRequirement(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set any amplifying information about the requirement.
- setRequirement(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set a description of the types and forms of information to be transmitted
or received.
- setResetProcedure(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the instructions for zeroing/sanitizing the jamming equipment to
initial operating conditions..
- setResourceLocator(S255) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set either the file name (including the extension) of the reference
document when it is attached to the dataset, or an URL (Uniform Resource
Locator) to find the document..
- setRetireDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Set the date this Dataset goes out of force..
- setReviewDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the date by which the dataset is to be reviewed.
- setReviewDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date by which the dataset is to be reviewed.
- setReviewDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the date by which the dataset is to be reviewed.
- setReviewDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the date by which the dataset is to be reviewed.
- setReviewDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set a description of the justification of why the JRFL entry is required,
to support the spectrum manager..
- setReviewDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the date by which the dataset is to be reviewed.
- setReviewDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the date by which the dataset is to be reviewed.
- setReviewDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the date by which the dataset is to be reviewed.
- setReviewDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the date by which the dataset is to be reviewed.
- setReviewDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the date by which the dataset is to be reviewed.
- setRFAdaptiveDriver(S500) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the condition controlling the choice of RF for Adaptive RF variations
(e.g., least jammed frequency).
- setRFAdaptiveRule(S500) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set In Data Item RFAdaptiveRule (US), indicate how the RF is chosen for
Adaptive RF variations..
- setRFBasicClockPeriod(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the frequency divisor common to all RF separations (not necessarily to
all RF) RF crystal is not always the same as the RF channelization (min)..
- setRFChangeRate(RFChgRate) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the RF change per unit of time, measured over a significant portion of
the waveform.
- setRFChannelFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the maximum RF channel values.
- setRFChannelFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the minimum RF channel values..
- setRFCoherent(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set In Data Item RFCoherent (US), indicate if the observed RF signal is
coherent, non-coherent, or unknown..
- setRFContinuous(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set whether pulse-to-pulse RF variations are Discrete or Continuous.
- setRFFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the typical highest RF value observed on a single intercept.
- setRFFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the typical lowest RF value observed on a single intercept..
- setRFFreqTolerance(UN18_6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the drift in Hz or in ppm using the formula: Frequency tolerance (ppm)
= Maximum drift (Hz) / Center frequency (MHz).
- setRFFreqToleranceInterval(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set In Data Item:RFFreqToleranceInterval (US), enter the time interval over
which the RF stability measurements were taken..
- setRFFreqToleranceUnit(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the units in which the Frequency Tolerance is expressed..
- setRFMean(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the average RF of a signal which changes RFs on a non-patterned basis..
- setRFMedian(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the most probable RF values..
- setRFPatternPeriod(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the duration of one cycle of the pattern for patterned RF variations..
- setRFPatternType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set In Data Item RFPatternType (US), Indicate whether RF is unmodulated or
pulse-to-pulse RF variations are Patterned, Non-Patterned, or Adaptive..
- setRFRestFreq(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the observed carrier or rest frequency when the modulation is off.
- setRFSequenceDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set a free text description of the RF Sequence..
- setRFSlotDuration(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the duration of a single time slot for the hop dwell.
- setRFStandardDeviation(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the standard deviation of the data set used to calculate RF Mean..
- setRFTuningStep(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the separation between the mean RF values of adjacent RFs in signal
with discrete RF channels..
- setRFValue(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFValues
-
Set the observed signals values.
- setRiseTime(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time required for a pulse to rise from 10% to 90 percent of the
mean peak amplitude of the voltage pattern..
- setRiseTime(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set an operational justification for short pulse rise time.
- setRole(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.UsingCountries
-
Set the role of the country associated with the emitter that transmits the
subject Notation/Signal..
- setRole(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the code used to document the main role of the Force Element.
- setRotationDirection(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the antenna direction of rotation or motion..
- setRotationRateMax(RotationRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set if applicable, the maximum antenna rotation rate.
- setRotationRateMin(RotationRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the nominal or minimum antenna rotation rate..
- setRoutineAgendaItem(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the type of National Telecommunications and Information Administration
(NTIA) Frequency Assignment Subcommittee (FAS) agenda on which the
application will be processed.
- setRxDuration(US_Duration) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the amount of time that the equipment will monitor the spectrum before
initiating an action, in (0-999) hours, (0-59) minutes, and (0-999,999,999)
nanoseconds (hhh.mm.sssssssss).
- setRxEndpointID(S20) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramLine
-
Set the Endpoint ID at the terminating (receiving) endpoint of a line on
the diagram.
- setRxType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the type of receiver.
- setSATCOMPriority(TString) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the satellite communication priority..
- setSatelliteAffected(TString) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set whether the interference affects satellite reception..
- setSatelliteChannel(S50) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the identifier of satellite channel experiencing the interference..
- setSatelliteDownlinkPolarisation(TString) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the polarisation of the satellite downlink signal..
- setSatelliteHemisphere(TString) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the satellite hemisphere..
- setSatelliteLongitude(Lon) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the satellite longitude.
- setSatelliteName(S50) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the name of the satellite experiencing the interference..
- setSatelliteTransponderID(S50) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the satellite transponder ID..
- setSatelliteUplinkFreq(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the satellite uplink frequency experiencing the interference.
- setSatelliteUplinkPolarisation(TString) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the polarisation of the satellite uplink signal..
- setScanAdaptiveDriverDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the condition which controls or can be associated with the signal Scan
Period variations..
- setScanAdaptiveRuleDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the rule which describes the signal Scan Period variations..
- setScanAngleAzStart(US_Deg_Signed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the maximum angle the subject emitter antenna mainbeam (aka., mainlobe)
reaches in the horizontal plane (aka., azimuth)..
- setScanAngleAzStop(US_Deg_Signed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the minimum angle the subject emitter antenna mainbeam (aka., mainlobe)
reaches in the horizontal plane (aka., azimuth)..
- setScanAngleElevStart(US_Deg_Signed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the maximum angle the subject emitter antenna mainbeam (aka., mainlobe)
reaches in the vertical plane (aka., elevation)..
- setScanAngleElevStop(US_Deg_Signed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the minimum angle the subject emitter antenna mainbeam (aka., mainlobe)
reaches in the vertical plane (aka., azimuth)..
- setScanDwell(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the scan duration.
- setScanDwellSequence(S500) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the Sequence of dwell durations, with elevation and azimuth.
- setScanDwellTime(US_PRIChgRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the time duration for a complete dwell/group of scan cycles which all
have the same Scan Period Discrete value before changing to a different
one..
- setScanElevContinuous(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set In Data Item ScanElevContinuous (US), indicate the if the scan
elevation progression is a continuous sweep..
- setScanPatternType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set In Data Item ScanPatternType (US), indicate whether the Scan Period is
unmodulated, Patterned, Non-Patterned, or Adaptive..
- setScansHorzContinuous(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set In Data Item ScanHorzContinuous (US), indicate the if the scan azimuth
progression is a continuous sweep..
- setScanType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set In Data Item ScanType (US), indicate if the observed data was detected
via a primary or secondary scan..
- setScanValue(US_ScanSpeed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanValues
-
Set the observed scan rate values .
- setSecondaryDatasets(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Set In Data Item SecondaryDatasets, indicate if datasets referenced by the
primary dataset are included..
- setSecondaryFirmware(S50) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set alternate mission-independent software that is "burned" and which stays
resident on the RF jamming hardware..
- setSecondHarmonicLevel(dB) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the out-of-band emission level at the frequency that is two times the
fundamental frequency.
- setSeconds(MinSec) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the seconds of hour [0-59] when the Assignment will be guarded
(monitored) or used for transmission..
- setSeconds(MinSec) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the seconds of hour [0-59] that the Force element is planned for
deployment..
- setSeconds(MinSec) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set In Data Item Seconds,enter the seconds of hour [0-59].
- setSeconds(MinSec) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set In Data Item Seconds,enter the seconds of hour [0-59].
- setSectBlanking(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set "Yes" if sector blanking is possible and "No" if it is not possible..
- setSecurityClass(SecurityClass) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the US:SecurityClass
- setSemiMajorAxis(DistEarth) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the length of the semi-major axis of the ellipse.
- setSemiMinorAxis(DistEarth) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the length of the semi-minor axis of the ellipse..
- setSensitivityCriteriaLevel(SCLevel) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the value of the criteria; the meaning and unit of this value depends
on the Sensitivity Criteria Type selected..
- setSensitivityCriteriaText(S50) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the value of the criteria when it cannot be expressed as a number..
- setSensitivityCriteriaType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the criteria used to determine the minimum RF signal power present at
the input terminals that ensures acceptable detection and demodulation of
the desired signal..
- setSensitivityLevel(dBm) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the minimum RF signal power level as it relates to one of the four
Sensitivity Criteria Types: PWOP, SINAD, S/N or S+N/N indicated in item
SensitivityCriteriaType.
- setSeparateSystemJustification(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the For trunked land mobile systems that are within 30 km of an
existing or planned trunked land mobile system authorised by NTIA, provides
the information required under subparagraph 8.2.48a of the NTIA Manual
("Procedures and Principles for the Assignment and Coordination of
Frequencies, Land Mobile Radio Communications")..
- setSequence(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Set a unique, sequenced, index for each point describing the current
polygon..
- setSequenceBitLength(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US: SequenceBitLength (US), enter the length of one
sequence of a pattern of bits that been observed repeating..
- setSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Set the serial of the referenced Dataset..
- setSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
- setSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a unique Dataset identifier.
- setSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
- setSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntryLocation
-
- setSerial(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Set the serial number Serial identifier.
- setSerial(Long) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Set the serial number Serial identifier as a Long Number instance.
- setSerial(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Set the serial number Serial identifier.
- setSerial(Long) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Set the serial number Serial identifier as a Long Number instance.
- setSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
- setSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
- setSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
- setSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
- setSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.rfsystem.RelatedSystem
-
- setServiceVolumeHeight(Altitude) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Set the altitude of aeronautical navigational aids, air traffic control
assignments for radio frequencies above 30 MHz, and low-frequency beacons.
- setServiceVolumeLocRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Set the reference to a Location for an aeronautical coverage area.
- setServiceVolumeRadius(DistEarth) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Set the radius associated with the Location to produce a circle.
- setShape(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set a code used to describe the general shape of the antenna reflector..
- setSidebandSuppressed(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the sideband that is suppressed in a single sideband signal..
- setSidebandSuppression(dB) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the amount that one or both of the sidebands of a signal are reduced
prior to transmission.
- setSignal(S100) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the waveform information modulated, or impressed, on the carrier..
- setSignalDurationMax(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the maximum time value for how long the tone persists in the baseband.
- setSignalDurationMin(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the minimum time value for how long the tone persists in the baseband..
- setSignalSequenceDesc(S100) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the pattern of occurrence of sub-signals.
- setSignalShape(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the basic shape of the signal..
- setSignalType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the type of modulation..
- setSignalType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item SignalType (US), indicate the specific type of modulation
used/detected..
- setSiteElevation(Altitude) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Set the site elevation of each base station and repeater in a trunking
system..
- setSoftware(S50) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the mission-specific software that is loaded on the RF jamming
hardware..
- setSolution(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set what actions were taken to resolve the interference..
- setSource(S100) - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Set the source or creator of the note..
- setSource(S100) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Set the name of the organisation or authority that is the source of the
comment.
- setSourceAz(Az) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the measured azimuth of the source from the victim..
- setSourceClsDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the date this classified dataset was prepared, i.e., the Original
Classification Date..
- setSourceEmsBw(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the calculated or measured bandwidth of the interference source..
- setSourceEmsClass(EmsDes) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set In Data Item SourceEmsClass, In Data Item EmsClass, enter a three to
five characters code, derived from the table below, representing the
emission classification.
- setSourceFieldStrength(FieldStrength) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the measured electromagnetic field strength..
- setSourceFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the maximum frequency of the interference, in case of a range..
- setSourceFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the nominal frequency of the interference, or the minimum frequency in
case of a range..
- setSourceLat(Lat) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the geographical latitude (degrees, minutes, seconds and hemisphere N
or S) of the source of the interference.
- setSourceLocDescr(S255) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the approximate position the source, if exact coordinates are not
known..
- setSourceLon(Lon) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the geographical longitude (degrees, minutes, seconds, and hemisphere E
or W) of the source of the interference.
- setSpectralPowerDensity(dBWHz) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxAntModeRef
-
Set the maximum spectral power density supplied to the input of the
antenna..
- setSpectrumLink(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set whether the transmitter(s) communicate or interact with the receiver(s)
in this Configuration, i.e.
- setSpeed(Speed) - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Set the speed of the force element along a straight route or to the next
waypoint..
- setSpreadSpectrum(SpreadSpectrum) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the Spread Spectrum
- setSpreadSpectrum(SpreadSpectrum) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the Spread Spectrum
- setSpuriousLevel(dB) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the maximum of all emission levels which occur outside the bandwidth of
the fundamental emission and not at a harmonic frequency.
- setSpuriousRejection(Rejection_DB1) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the spurious receiver responses that arise when strong undesired
signals and the receiver local oscillator (LO) combine in the mixer to
produce a frequency on or near the intermediate frequency.
- setSSRequestRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the dataset identifier of the SSRequest being replied to..
- setSSRequestRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Set a Serial reference to a superseded or related SSRequest application..
- setStageNum(IFNum) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Set the position of the IF stage being described..
- setStandOffDist(DistSpace) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the required distance from the jammer to non-threat equipment, in km..
- setStartDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the date upon which work will commence on this stage..
- setStartDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the date/time stamp when to initiate the jamming, if "Date/Time" is
used in element StartTrigger.
- setStartDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the timestamp when the denial of spectrum use is planned to begin..
- setStartLocationRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
- setStartTrigger(TString) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the type of trigger that indicates when it is time to start jamming..
- setState(S50) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Set the action performed for this status log entry..
- setState(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the state of the dataset.
- setStateCounty(S50) - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Set the state or other sub-national political area..
- setStateCounty(S50) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the state or other sub-national political area..
- setStationControl(S18) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the operating unit that controls the station when different than the
assignment users..
- setStationID(S100) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the unique identifier of one of the stations used by this Assignment at
this specific Station.
- setStationID(S100) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the unique identifier of one of the stations used by this Assignment at
this specific Station.
- setStationName(S100) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set a short descriptive name for the station.
- setStatisticalIndicator(US_Percent3) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationValues
-
Set In Data Item StatisticalIndicator (US), indicate how this specific data
observation was collected (e.g., 95% of the observed values).
- setStatisticalIndicator(Percent) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanValues
-
Set In Data Item StatisticalIndicator (US), indicate how this specific data
observation was used (e.g., 95% of the observed values).
- setStatisticalIndicator(US_Percent3) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPValues
-
Set In Data Item StatisticalIndicator (US), indicate how this specific data
observation was used (e.g., 95% of the observed values).
- setStatisticalIndicator(US_Percent3) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Set In Data Item StatisticalIndicator (US), indicate how this specific data
observation was collected (e.g., 95% of the observed values).
- setStatisticalIndicator(US_Percent3) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Set In Data Item StatisticalIndicator (US), indicate how this specific data
observation was collected (e.g., 95% of the observed values).
- setStatisticalIndicator(US_Percent3) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFValues
-
Set In Data Item StatisticalIndicator (US), indicate how this specific data
observation was collected (e.g., 95% of the observed values).
- setStatus(TString) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Set the status of the future, prior, or associated, Notation..
- setStatus(TString) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Set the status of the future, prior, or associated, Notation..
- setStatus(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Set the status of the Deployment..
- setStatusChangeDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Set the timestamp when the prior, or associated, Notation achieved this
Status..
- setStnClass(TString) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
Set the station class, as defined by the appropriate Administration..
- setStockNum(S50) - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.StockNum
-
Set the stock number of the system/equipment..
- setStopDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the date/time stamp when to stop the jamming, if "Date/Time" is used in
element StopTrigger.
- setStopDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the timestamp when the denial of spectrum use is planned to be halted..
- setStopLocationRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
- setStopTrigger(TString) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the type of trigger that indicates when it is time to stop jamming..
- setStreet(S255) - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Set the street address..
- setStreet(S255) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the street address..
- setSupplementaryDetails(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set amplifying information that would facilitate processing.
- setSupportabilityCode(TString) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the overall result of the national analysis.
- setSymbolSize(US_Bits) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the number of bits in the symbols being generated.
- setSyncMethod(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set a description of the timing synchronisation method used by the timing
deconfliction protocol..
- setSysName(S30) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.SysOfStation
-
Set the name of the system to which the frequency assignment belongs.
- setSysRelationEssential(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set .
- setTAD(US5) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Set the TAD associated to the assigned frequency.
- setTargetDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the date by which a usable version of the system is expected to be
available for testing or deployment..
- setTargetID(UN5) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set a unique (within the parent JammingPlan) numeric identifier to
distinguish one target from another..
- setTechniques(UN5) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set how many ramp techniques occur during the programmed frequency range
dwell time..
- setTerminationDate(D) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the date this stage is expected to terminate.
- setTerrainElevation(Altitude) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set the elevation of the base of the transmitting antenna structure above
Mean Sea Level (MSL)..
- setText(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Set the textual specification of the footnote, band user or band
application..
- setThirdHarmonicLevel(dB) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the out-of-band emission level at the frequency that is three times the
fundamental frequency.
- setThreat(S100) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set a short description of the threat name or threat type..
- setTiltAngleAdaptiveDriverDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the condition which controls, or can be associated with, the signals
Tilt Angle variations..
- setTiltAngleAdaptiveRuleDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the rule which describes the signal Polarisation Tilt Angle
variations..
- setTiltAngleContinuous(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set whether the tilt angle variations are Discrete or Continuous.
- setTiltAngleDuration(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the time duration for a complete dwell/group of pulses which all have
the same discrete Polarisation Tilt Angle value, or for a continuous wave
at a constant Polarisation Tilt Angle value..
- setTiltAngleExtremeMax(US_Deg_Signed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the upper end of the range of Polarisation Tilt Angle values that
represent 100% of observed Tilt Angle values, from a statistical study of
the data set.
- setTiltAngleExtremeMin(US_Deg_Signed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the lower end of the range of Polarisation Tilt Angle values that
represent 100% of observed Tilt Angle values, from a statistical study of
the data set..
- setTiltAngleMean(US_Deg_Signed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the average Polarisation Tilt Angle value for a signal which changes
Polarisation Tilt Angle values on a non-patterned basis..
- setTiltAngleMedian(US_Deg_Signed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the observed Polarisation Tilt Angle value that the signal most often
used, based on statistical study of the data set..
- setTiltAnglePatternPeriod(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the time duration for one complete cycle of a repeating Polarisation
Tilt Angle sequence.
- setTiltAnglePatternType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set In Data Item TiltAnglePatternType (US), indicate whether Tilt Angle is
unmodulated or Tilt Angle variations are Patterned, Non-Patterned, or
Adaptive..
- setTiltAngleRangeMax(US_Deg_Signed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the highest discrete Polarisation Tilt Angle value found in a single
intercept that contains the complete Polarisation Tilt Angle
characteristics.
- setTiltAngleRangeMin(US_Deg_Signed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the lowest discrete Polarisation Tilt Angle value found in a single
intercept that contains the complete Polarisation Tilt Angle
characteristics.
- setTiltAngleRate(US_TiltAngRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the rate of change for Polarisation Tilt Angle variations expressed in
Polarisation Tilt Angle changes per unit of time..
- setTiltAngleSequenceDesc(S500) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set a free text description of the sequence of Polarisation Tilt Angle
values..
- setTiltAngleStdDev(US_Deg_Signed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the standard deviation of the data set used to calculate Polarisation
Tilt Angle Mean fields..
- setTiltAngleStep(US_Deg_Signed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the delta between the Most Probable Polarisation Tilt Angle values of
adjacent and discrete Polarisation Tilt Angle values..
- setTiltAngleValue(US_Deg_Signed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationValues
-
Set the observed Tilt Angle which provided the base data set used for
statistical study..
- setTimeHopNumSlots(UN5) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the number of time slots..
- setTimeHopPulsesPerDwell(UN12) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the number of pulses transmitted during each dwell..
- setTitle(S100) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set an identifying name for this Allotment or Assignment..
- setTitle(S100) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set an identifying name for this Allotment or Assignment..
- setTitle(S30) - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Set the title of the source document..
- setTitle(S255) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the full title of the document..
- setTitle(S100) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the title of the Spectrum Supportability application.
- setTitle(S100) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set an identifying name for this Table of Allocations..
- setTitleRank(S10) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the contact title or rank e.g., Ms, Col, etc..
- setTriggerOff(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set the time that the jammer is off (listening)..
- setTriggerOn(microsecs) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set the time that the jammer is on (jamming)..
- setTrunking(Trunking) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the US:Trunking
- setTSDF(TSDFValue) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set .
- setTSPR(S10) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the telecommunications service priority applicable to a
spectrum-dependent radiocommunications system intended to be used in direct
support of a national emergency declared under Section 706 of the
Communications Act of 1934, as amended..
- setTSPR(S10) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the telecommunications service priority applicable to a
spectrum-dependent radiocommunications system intended to be used in direct
support of a national emergency declared under Section 706 of the
Communications Act of 1934, as amended..
- setTSPR(S10) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the telecommunications service priority applicable to a
spectrum-dependent radiocommunications system intended to be used in direct
support of a national emergency declared under Section 706 of the
Communications Act of 1934, as amended..
- setTunability(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the tuning capability..
- setTunability(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the tuning capability..
- setTuningMethod(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the device or process used to tune the equipment through the RF
spectrum..
- setTuningMethod(TString) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the device or process used to tune the equipment through the RF
spectrum..
- setTuningStep(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Set the tuning increment..
- setTuningStep(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Set the tuning increment expressed of the requested frequency range.
- setTuningStep(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Set the tuning increment..
- setTuningStep(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the separation between the mean RF values of adjacent RFs in signal
with discrete RF channels..
- setTuningStep(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Set the tuning increment..
- setTxDuration(US_Duration) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the amount of time that the equipment will emit a jamming signal, in in
(0-999) hours, (0-59) minutes, and (0-999,999,999) nanoseconds
(hhh.mm.sssssssss).
- setTxEndpointID(S20) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramLine
-
Set the Endpoint ID at the originating (transmitting) endpoint of a line on
the diagram.
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
Set the function of the referenced Contact or Organisation within the
current dataset..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Project
-
Set the type of project..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Set the type of the pattern cut.
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Set the type of nomenclature (commercial, military, etc)..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set whether the StationConfig is acting as a transmitter, receiver or
transceiver..
- setType(S20) - Method in class us.gov.dod.standard.ssrf._3_1.common.CaseNum
-
Set a text identifying the type of case number (national file, exercise
name, etc)..
- setType(S20) - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Set the type of network hosting the e-mail address..
- setType(S20) - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Set the name of the network on which this number can be dialed (e.g., DSN,
IVSN, CORMORANT).
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the type of information referenced by this external reference..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the type of deployment..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set if the Force Element is a Unit or a Platform..
- setType(S25) - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.StockNum
-
Set the type of stock number..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Set the type of Notation..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Set the type of Notation..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.PotentialVictims
-
Set the type of Notation.
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
Set the type of relationship..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the type of relationship..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set a code defining the type of curve..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Set the type of deployment..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the type of spread spectrum system being used..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
Set if this is a specific or typical earth station..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Set the type of dependency between the current dataset and the referred
application..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the stage..
- setType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Set the type of variance..
- setTypeOfService(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the type of service or circuit involved..
- setUIC(S20) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set an organisational identifier that may be used to uniquely identify an
organisation in operational planning systems and other non-spectrum
information systems..
- setUIC(S20) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set an organisational identifier that may be used to uniquely identify an
organisation in operational planning systems and other non-spectrum
information systems..
- setUsageCode(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the usage and category of circuits..
- setUsageDescription(MEMO) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Time
-
Set a description of the total amount of time a system/equipment is
expected to be in operation..
- setUsageFrequency(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the general amount of time when the frequency assignment frequencies
will be either guarded (monitored) or used for transmission..
- setUsagePercentage(US_Percent) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the percentage of time the transmitter equipment is in use during the
scheduled hours of operation..
- setUsageType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the type of assignment request or approved assignment/allotment.
- setUsageType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the type of assignment request or approved assignment or allotment.
- setUseIndicator(S40) - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Set the permitted uses of this band (e.g., "Government", "Non-government",
etc)..
- setUser(S50) - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Set a specific user of this channel in the channel plan..
- setUserCode(S6) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set a code identifying the user of the station..
- setUserNetCode(S6) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set a unique code that identifies the specific user of the frequency, i.e.,
the command, activity, unit, project, etc..
- setValue(S50) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Code
-
Set the unique code entry within the code list..
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set a value that is most probably correct..
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set a value that is most probably correct..
- setValue(ListUFN) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set a value that is most probably correct..
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set a value that is most probably correct..
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set a value that is most probably correct..
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set a value that is most probably correct..
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.ChannelFreq
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.common.Remarks
-
Set a value that is most probably correct..
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Altitude
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.AntHeight
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Az
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Az180
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.BitRate
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.BurstRate
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.CodeRate
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.CurvePointLevel
-
Set the value of the value property.
- setValue(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.D
-
Sets the value of the value property.
- setValue(Date) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.D
-
Sets the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DaysOfMonth
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DaysOfWeek
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dB
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBi
-
Set the value of the value property.
- setValue(Double) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Dble
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBm
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBW
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBWHz
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DigestCode
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Dimension
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DistEarth
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DistSpace
-
Set the value of the value property.
- setValue(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DT
-
Sets the value of the value property.
- setValue(Date) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DT
-
Sets the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Duration_UN4
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Elev
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Elev180
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.EmsDes
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FieldStrength
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqH
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqM
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqOffset
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Height_UN4
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.hops
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Hours
-
Set the value of the value property.
- setValue(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.IFNum
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.InfoDataRate
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.kChirps
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Kelvins
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Lat
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Lon
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MChips
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MEMO
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.microsecs
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.millisecs
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MinSec
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.minutes
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Months
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.NavAidChnl
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.NetNumber
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Percent
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.platform
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.priority
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.PulseRate
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Rejection_DB1
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Rejection_DB2
-
Set the value of the value property.
- setValue(Set<ListCCY>) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Releasability
-
Deprecated.
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.RFChgRate
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.RotationRate
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S1
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S10
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S100
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S11
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S12
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S14
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S15
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S150
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S16
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S18
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S2
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S20
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S200
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S22
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S24
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S25
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S255
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S3
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S30
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S35
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S4
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S40
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S5
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S50
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S500
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S6
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S60
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S7
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S70
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S8
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S80
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S9
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanRate
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanSpeed
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SCLevel
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Sets the SSRF SERIAL number value.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_4_1
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_5_2
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SmallMicrosecs
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_15
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_6
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN2
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN3_1
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN4_1
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_1
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_2
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_2
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_3
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_2
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_4
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_2
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_6
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_8
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Speed
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TBD
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TSDFValue
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TString
-
Sets the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN1
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_2
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_3
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_4
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_6
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN11_8
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_3
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_4
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_6
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16_15
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN18_6
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2_1
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_1
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_2
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_1
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_2
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_1
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_2
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_3
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_4
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_1
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_2
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_3
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_4
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_1
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_2
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_4
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_5
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_2
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_3
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_4
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_5
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_6
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_1
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_3
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_4
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_5
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_6
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_7
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB_5_2
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US1
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US10
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US12
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US15
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US2
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US20
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US3
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US30
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US4
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US40
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US5
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US50
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US6
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Bits
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB150
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB90
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBm
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBW
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWHz
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWS
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Deg_Signed
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees90
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Duration
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Elev
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgAm
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgFm
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPFm
-
Set the value of the value property.
- setValue(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent2
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent3
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngle
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngleRate
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPM
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPS
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PRIChgRate
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanRate
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanSpeed
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_TiltAngRate
-
Set the value of the value property.
- setValue(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Twips
-
Set the value of the value property.
- setValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_UN16_9
-
Set the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Years
-
Set the value of the value property.
- setValue(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TDate
-
Sets the value of the value property.
- setValue(Date) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TDate
-
Sets the value of the value property.
- setValue(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TDateTime
-
Sets the value of the value property.
- setValue(Date) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TDateTime
-
Sets the value of the value property.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Sets the SSRF SERIAL number value.
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set a value that is most probably correct..
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a value that is most probably correct..
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set a value that is most probably correct..
- setValue(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set a value that is most probably correct..
- setValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set a value that is most probably correct..
- setValue(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set a value that is most probably correct..
- setValue(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set a value that is most probably correct..
- setValue(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set a value that is most probably correct..
- setValue(ListUSC) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set a value that is most probably correct..
- setVersion(S10) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the current version of the Jamming Plan..
- setVersion(S10) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the current version of the Radiation Plan..
- setVertAperture(Dimension) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the vertical cross-section of the antenna radiation pattern in the
direction of highest gain..
- setVertBwMax(Az) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the maximum vertical beamwidth for beamwidths which vary with the
frequency.
- setVertBwMax(US_Degrees) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the maximum angle of the vertical component of the antenna mainbeam
measured at the half-power (-3 dB) points of its maximum vertical width.
- setVertBwMin(Az) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the minimum or nominal vertical beamwidth..
- setVertBwMin(US_Degrees) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the minimum angle of the vertical component of the antenna mainbeam
measured at the half-power (-3 dB) points of its maximum vertical width..
- setVertDimension(Dimension) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the linear vertical dimension of the antenna..
- setVertScanAngleMax(Elev) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the maximum limit of the vertical arc scanned relative to the
horizontal.
- setVertScanAngleMin(Elev) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the minimum limit of the vertical arc scanned relative to the
horizontal..
- setVertScanRate(ScanRate) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the number of complete vertical scans per minute.
- setVertScanSpeed(ScanSpeed) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the number of degrees of vertical scan per second.
- setVertScanType(TString) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the antenna vertical scanning capability..
- setVertSidelobeAttenuation(Unsigned_DB_5_2) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the attenuation of the sidelobe relative to the main beam gain..
- setVertSidelobeElev(Elev180) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the first sidelobe in the vertical plane.
- setVertSidelobeSuppressed(TString) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set whether a portion of the radiation from an antenna outside of the main
beam has been suppressed or eliminated...
- setVictimAsgnRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
- setVictimCountry(TString) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the country or area where the victim of the interference is located..
- setVictimFreqMax(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the upper frequency of the range, in case of an assignment over a
frequency range..
- setVictimFreqMin(FreqM) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the nominal or lower frequency used by the victim of the interference..
- setVictimLat(Lat) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the geographical latitude (degrees, minutes, seconds and hemisphere N
or S) of the victim of the interference.
- setVictimLocDescr(S255) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the approximate position the victim of the interference, if exact
coordinates are not known..
- setVictimLon(Lon) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the geographical longitude (degrees, minutes, seconds, and hemisphere E
or W) of the victim of the interference.
- setVictimName(S50) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.PotentialVictims
-
Set the name or nomenclature of a system that may be negatively impacted by
the subject Notation/Signal..
- setVictimNotation(US20) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.PotentialVictims
-
Set the designator for a specific emitter that may be negatively impacted
by the subject Notation/Signal..
- setVictimSystem(S100) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the nomenclature or other identifier of equipment experiencing the
interference..
- setWartimeUse(TString) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set if the system is used in a wartime environment..
- setWaypointIdx(UN6) - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Set the sequential index of a Point within the referenced Location.
- setYears(Years) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the 4-digit year [1900..2100] when the Assignment will be guarded
(monitored) or used for transmission..
- setYears(Years) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the 4-digit year [1900..2100] that the Force element is planned for
deployment..
- setYears(Years) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the 4-digit year [1900..2100]..
- setYears(Years) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the 4-digit year [1900..2100]..
- Signed_DB_4_1 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF Signed_DB_4_1 data type.
- Signed_DB_4_1() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_4_1
-
Construct a new, empty Signed_DB_4_1 instance.
- Signed_DB_4_1(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_4_1
-
Construct a new Signed_DB_4_1 instance with the given initial value.
- Signed_DB_4_1(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_4_1
-
Construct a new Signed_DB_4_1 instance with the given initial value.
- Signed_DB_5_2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF Signed_DB_5_2 data type.
- Signed_DB_5_2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_5_2
-
Construct a new, empty Signed_DB_5_2 instance.
- Signed_DB_5_2(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_5_2
-
Construct a new Signed_DB_5_2 instance with the given initial value.
- Signed_DB_5_2(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_5_2
-
Construct a new Signed_DB_5_2 instance with the given initial value.
- SMADEF - Class in us.gov.dod.standard.ssrf
-
- SMADEF() - Constructor for class us.gov.dod.standard.ssrf.SMADEF
-
Deprecated.
- SmallMicrosecs - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SmallMicrosecs data type.
- SmallMicrosecs() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SmallMicrosecs
-
Construct a new, empty SmallMicrosecs instance.
- SmallMicrosecs(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SmallMicrosecs
-
Construct a new SmallMicrosecs instance with the given initial value.
- SmallMicrosecs(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SmallMicrosecs
-
Construct a new SmallMicrosecs instance with the given initial value.
- SN16_15 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN16_15 data type.
- SN16_15() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_15
-
Construct a new, empty SN16_15 instance.
- SN16_15(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_15
-
Construct a new SN16_15 instance with the given initial value.
- SN16_15(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_15
-
Construct a new SN16_15 instance with the given initial value.
- SN16_6 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN16_6 data type.
- SN16_6() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_6
-
Construct a new, empty SN16_6 instance.
- SN16_6(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_6
-
Construct a new SN16_6 instance with the given initial value.
- SN16_6(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_6
-
Construct a new SN16_6 instance with the given initial value.
- SN2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN2 data type.
- SN2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN2
-
Construct a new, empty SN2 instance.
- SN2(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN2
-
Construct a new SN2 instance with the given initial value.
- SN2(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN2
-
Construct a new SN2 instance with the given initial value.
- SN3_1 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN3_1 data type.
- SN3_1() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN3_1
-
Construct a new, empty SN3_1 instance.
- SN3_1(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN3_1
-
Construct a new SN3_1 instance with the given initial value.
- SN3_1(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN3_1
-
Construct a new SN3_1 instance with the given initial value.
- SN4_1 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN4_1 data type.
- SN4_1() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN4_1
-
Construct a new, empty SN4_1 instance.
- SN4_1(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN4_1
-
Construct a new SN4_1 instance with the given initial value.
- SN4_1(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN4_1
-
Construct a new SN4_1 instance with the given initial value.
- SN5 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN5 data type.
- SN5() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5
-
Construct a new, empty SN5 instance.
- SN5(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5
-
Construct a new SN5 instance with the given initial value.
- SN5(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5
-
Construct a new SN5 instance with the given initial value.
- SN5_1 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN5_1 data type.
- SN5_1() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_1
-
Construct a new, empty SN5_1 instance.
- SN5_1(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_1
-
Construct a new SN5_1 instance with the given initial value.
- SN5_1(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_1
-
Construct a new SN5_1 instance with the given initial value.
- SN5_2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN5_2 data type.
- SN5_2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_2
-
Construct a new, empty SN5_2 instance.
- SN5_2(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_2
-
Construct a new SN5_2 instance with the given initial value.
- SN5_2(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_2
-
Construct a new SN5_2 instance with the given initial value.
- SN6 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN6 data type.
- SN6() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6
-
Construct a new, empty SN6 instance.
- SN6(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6
-
Construct a new SN6 instance with the given initial value.
- SN6(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6
-
Construct a new SN6 instance with the given initial value.
- SN6_2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN6_2 data type.
- SN6_2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_2
-
Construct a new, empty SN6_2 instance.
- SN6_2(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_2
-
Construct a new SN6_2 instance with the given initial value.
- SN6_2(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_2
-
Construct a new SN6_2 instance with the given initial value.
- SN6_3 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN6_3 data type.
- SN6_3() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_3
-
Construct a new, empty SN6_3 instance.
- SN6_3(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_3
-
Construct a new SN6_3 instance with the given initial value.
- SN6_3(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_3
-
Construct a new SN6_3 instance with the given initial value.
- SN7_2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN7_2 data type.
- SN7_2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_2
-
Construct a new, empty SN7_2 instance.
- SN7_2(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_2
-
Construct a new SN7_2 instance with the given initial value.
- SN7_2(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_2
-
Construct a new SN7_2 instance with the given initial value.
- SN7_4 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN7_4 data type.
- SN7_4() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_4
-
Construct a new, empty SN7_4 instance.
- SN7_4(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_4
-
Construct a new SN7_4 instance with the given initial value.
- SN7_4(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_4
-
Construct a new SN7_4 instance with the given initial value.
- SN9_2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN9_2 data type.
- SN9_2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_2
-
Construct a new, empty SN9_2 instance.
- SN9_2(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_2
-
Construct a new SN9_2 instance with the given initial value.
- SN9_2(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_2
-
Construct a new SN9_2 instance with the given initial value.
- SN9_6 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN9_6 data type.
- SN9_6() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_6
-
Construct a new, empty SN9_6 instance.
- SN9_6(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_6
-
Construct a new SN9_6 instance with the given initial value.
- SN9_6(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_6
-
Construct a new SN9_6 instance with the given initial value.
- SN9_8 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF SN9_8 data type.
- SN9_8() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_8
-
Construct a new, empty SN9_8 instance.
- SN9_8(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_8
-
Construct a new SN9_8 instance with the given initial value.
- SN9_8(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_8
-
Construct a new SN9_8 instance with the given initial value.
- Speed - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF Speed data type.
- Speed() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Speed
-
Construct a new, empty Speed instance.
- Speed(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Speed
-
Construct a new Speed instance with the given initial value.
- Speed(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Speed
-
Construct a new Speed instance with the given initial value.
- SpreadSpectrum - Class in us.gov.dod.standard.ssrf._3_1.receiver
-
SpreadSpectrum contains characteristics of systems using spread spectrum
techniques.
- SpreadSpectrum() - Constructor for class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
- ssReply - Variable in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
- SSReply - Class in us.gov.dod.standard.ssrf._3_1
-
SSReply is the XML root for all parameters of a Host Nation Declaration of
Spectrum Supportability.
- SSReply() - Constructor for class us.gov.dod.standard.ssrf._3_1.SSReply
-
No arg constructor.
- ssRequest - Variable in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
- SSRequest - Class in us.gov.dod.standard.ssrf._3_1
-
SSRequest contains all parameters describing the system and its usage, for
which Spectrum Supportability is being requested.
- SSRequest() - Constructor for class us.gov.dod.standard.ssrf._3_1.SSRequest
-
No arg constructor.
- SSRF - Class in us.gov.dod.standard.ssrf
-
Standard Spectrum Resource Format (SSRF).
- SSRF() - Constructor for class us.gov.dod.standard.ssrf.SSRF
-
- SSRFProperties - Class in us.gov.dod.standard.ssrf
-
SSRF Properties manager.
- SSRFProperties() - Constructor for class us.gov.dod.standard.ssrf.SSRFProperties
-
- SSRFUtility - Class in us.gov.dod.standard.ssrf
-
A collection of useful SSRF and JAXB Utility classes.
- SSRFUtility() - Constructor for class us.gov.dod.standard.ssrf.SSRFUtility
-
- Stage - Class in us.gov.dod.standard.ssrf._3_1.ssrequest
-
Stage contains information about the life-cycle management of the system.
- Stage() - Constructor for class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
- StageLocation - Class in us.gov.dod.standard.ssrf._3_1.ssreply
-
StageLocation defines locations where the equipment or system is allowed or
forbidden from use.
- StageLocation() - Constructor for class us.gov.dod.standard.ssrf._3_1.ssreply.StageLocation
-
- state - Variable in class us.gov.dod.standard.ssrf._3_1.Common
-
State - Dataset Status (Optional)
- Station - Class in us.gov.dod.standard.ssrf._3_1.assignment
-
Station defines the station, or one of the stations, within the current
Assignment dataset.
- Station() - Constructor for class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
- StationConfig - Class in us.gov.dod.standard.ssrf._3_1.assignment
-
StationConfig describes one couple (station, configuration) used for
transmitting and/or receiving in the current Link.
- StationConfig() - Constructor for class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
- StationLoc - Class in us.gov.dod.standard.ssrf._3_1.assignment
-
Station (US) defines one or more transmitters or receivers or a combination
of transmitters and receivers, including the accessory
- StationLoc() - Constructor for class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
- StatusLog - Class in us.gov.dod.standard.ssrf._3_1.assignment
-
StatusLog (US) contains the transactional processing information related to
frequency assignments.
- StatusLog() - Constructor for class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
- StnClass - Class in us.gov.dod.standard.ssrf._3_1.toa
-
StnClass contains the station class associated with the TOA frequency usage.
- StnClass() - Constructor for class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
- StockNum - Class in us.gov.dod.standard.ssrf._3_1.forceelement
-
StockNum (US) provides the equipment stock number and indicates the type of
stock number.
- StockNum() - Constructor for class us.gov.dod.standard.ssrf._3_1.forceelement.StockNum
-
- store(File) - Method in class us.gov.dod.standard.ssrf.SSRFProperties
-
Writes the property list (key and element pairs) in this Properties table
to the output file in a format suitable for loading into a Properties table
using the
SSRFProperties.load(File)
method.
- storeToXML(File) - Method in class us.gov.dod.standard.ssrf.SSRFProperties
-
Writes the property list (key and element pairs) in this Properties table
to the output file in a format suitable for loading into a Properties table
using the
SSRFProperties.loadFromXML(java.io.File)
method.
- SubcarrierFreq - Class in us.gov.dod.standard.ssrf._3_1.transmitter
-
SubcarrierFreq describes the secondary channel that
- SubcarrierFreq() - Constructor for class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
- SubcarrierTone - Class in us.gov.dod.standard.ssrf._3_1.transmitter
-
SubcarrierTone describes the sidetone frequency used to modulate the
subcarrier.
- SubcarrierTone() - Constructor for class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
- SysOfStation - Class in us.gov.dod.standard.ssrf._3_1.assignment
-
SysOfStation defines the name of the system that this assignment belongs and
whether or not the assignment provides assets to or uses another assignment
resources.
- SysOfStation() - Constructor for class us.gov.dod.standard.ssrf._3_1.assignment.SysOfStation
-
- TBD - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF TBD data type.
- TBD() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.TBD
-
Construct a new, empty TBD instance.
- TBD(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.TBD
-
Construct a new TBD instance with the given initial value.
- TDate - Class in us.gov.dod.standard.ssrf._3_1.metadata
-
A Calendar instance with SSRF Standard Metadata Attributes.
- TDate(Calendar) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.TDate
-
- TDate(Date) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.TDate
-
- TDate() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.TDate
-
Zero argument constructor.
- TDateTime - Class in us.gov.dod.standard.ssrf._3_1.metadata
-
A Calendar instance with SSRF Standard Metadata Attributes.
- TDateTime(Calendar) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.TDateTime
-
- TDateTime(Date) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.TDateTime
-
- TDateTime() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.TDateTime
-
Zero argument constructor.
- TelephoneFax - Class in us.gov.dod.standard.ssrf._3_1.contact
-
TelephoneFax reflects the telephone and/or telefax number(s) of the Contact,
Organisation or Role.
- TelephoneFax() - Constructor for class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
- Time - Class in us.gov.dod.standard.ssrf._3_1.ssrequest
-
Time indicates when the equipment or system will be used.
- Time() - Constructor for class us.gov.dod.standard.ssrf._3_1.ssrequest.Time
-
- TimingDeconflictionProtocol - Class in us.gov.dod.standard.ssrf._3_1.loadset
-
TimingDeconflictionProtocol (US) defines algorithm(s) used for synchronising
Electronic Warfare jamming information.
- TimingDeconflictionProtocol() - Constructor for class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
- toa - Variable in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
- TOA - Class in us.gov.dod.standard.ssrf._3_1
-
TOA is the XML root for all parameters of a Table of Allocations.
- TOA() - Constructor for class us.gov.dod.standard.ssrf._3_1.TOA
-
No arg constructor.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Code
-
Get a string representation of this Code instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Get a string representation of this CodeList instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Get a string representation of this Dataset instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Get a string representation of this Administrative instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Get a string representation of this AllotFreq instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Emission
-
Get a string representation of this Emission instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
Get a string representation of this POCInformation instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Project
-
Get a string representation of this Project instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Get a string representation of this Allotment instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntEfficiency
-
Get a string representation of this AntEfficiency instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Get a string representation of this AntFreqs instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Get a string representation of this AntGain instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Get a string representation of this AntHardware instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Get a string representation of this AntMode instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Get a string representation of this AntPattern instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPatternPoint
-
Get a string representation of this AntPatternPoint instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Manufacturer
-
Get a string representation of this Manufacturer instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Get a string representation of this Nomenclature instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Get a string representation of this ObservedLobeAnalysis instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Get a string representation of this ObservedLobeValues instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Get a string representation of this ObservedPolarisationAnalysis instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationValues
-
Get a string representation of this ObservedPolarisationValues instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Get a string representation of this ObservedScanAnalysis instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanValues
-
Get a string representation of this ObservedScanValues instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Get a string representation of this Antenna instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.UsingCountries
-
Get a string representation of this UsingCountries instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.VSWR
-
Get a string representation of this VSWR instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Get a string representation of this AsgnFreqBase instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
Get a string representation of this AsgnAllotOwner instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Get a string representation of this Assigned instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Get a string representation of this Blanking instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Get a string representation of this CircuitRemarks instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Get a string representation of this Configuration instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CoordinationData
-
Get a string representation of this CoordinationData instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Get a string representation of this DCSTrunk instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Get a string representation of this DetailedFunction instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Get a string representation of this DocketNum instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Get a string representation of this Freq instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.FreqOld
-
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Get a string representation of this HostDocketNum instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Get a string representation of this Link instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.NarrowBandPlanning
-
Get a string representation of this NarrowBandPlanning instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Get a string representation of this OffTheShelfEquipment instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Get a string representation of this PairedFreq instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Get a string representation of this PreviousAuthorization instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.RecordNote
-
Get a string representation of this RecordNote instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Get a string representation of this Station instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Get a string representation of this StationConfig instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Get a string representation of this StationLoc instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Get a string representation of this StatusLog instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.SysOfStation
-
Get a string representation of this SysOfStation instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Get a string representation of this Assignment instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Get a string representation of this Tuning instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Get a string representation of this Channel instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.ChannelFreq
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ChannelPlan
-
Get a string representation of this ChannelPlan instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.common.CaseNum
-
Get a string representation of this CaseNum instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Get a string representation of this ClsDerived instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Get a string representation of this Downgrade instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
Get a string representation of this ExtReferenceRef instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.common.Remarks
-
Get a string representation of this Remarks instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Get a string representation of this SecurityClass instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Get a string representation of this Common instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Get a string representation of this Address instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Get a string representation of this EMail instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Get a string representation of this TelephoneFax instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Get a string representation of this Contact instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Get a string representation of this ExternalReference instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Get a string representation of this AtWaypoint instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Get a string representation of this FEDeployment instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
Get a string representation of this Assets instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.StockNum
-
Get a string representation of this StockNum instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Get a string representation of this ForceElement instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Get a string representation of this IntfReport instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Get a string representation of this JRFLEntry instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntryLocation
-
Get a string representation of this JRFLEntryLocation instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Get a string representation of this JRFL instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Get a string representation of this JammingChannelProfile instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Get a string representation of this TimingDeconflictionProtocol instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Get a string representation of this Loadset instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Get a string representation of this Ellipse instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Get a string representation of this Point instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Get a string representation of this Polygon instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Get a string representation of this PolygonPoint instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Get a string representation of this Location instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Get a string representation of this Message instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Get a string representation of this Common instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Altitude
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.AntHeight
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Az
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Az180
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.BitRate
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.BurstRate
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.CodeRate
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.CurvePointLevel
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.D
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DaysOfMonth
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DaysOfWeek
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dB
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBi
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Dble
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBm
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBW
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.dBWHz
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DigestCode
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Dimension
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DistEarth
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DistSpace
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.DT
-
Get the configured value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Duration_UN4
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Elev
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Elev180
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.EmsDes
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FieldStrength
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqH
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqM
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.FreqOffset
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Height_UN4
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.hops
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Hours
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.IFNum
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.InfoDataRate
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.kChirps
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Kelvins
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Lat
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Lon
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MChips
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MEMO
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.microsecs
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.millisecs
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.MinSec
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.minutes
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Months
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.NavAidChnl
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.NetNumber
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Percent
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.platform
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.priority
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.PulseRate
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Rejection_DB1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Rejection_DB2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Releasability
-
Deprecated.
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.RFChgRate
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.RotationRate
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S10
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S100
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S11
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S12
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S14
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S15
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S150
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S16
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S18
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S20
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S200
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S22
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S24
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S25
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S255
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S3
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S30
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S35
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S4
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S40
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S5
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S50
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S500
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S6
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S60
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S7
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S70
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S8
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S80
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.S9
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanRate
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.ScanSpeed
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SCLevel
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Gets the SSRF SERIAL number value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_4_1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Signed_DB_5_2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SmallMicrosecs
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_15
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN16_6
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN3_1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN4_1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN5_2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN6_3
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN7_4
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_6
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.SN9_8
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Speed
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TBD
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TSDFValue
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TString
-
Get the configured value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_3
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_4
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_6
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN11_8
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_3
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_4
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_6
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16_15
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN18_6
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2_1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_3
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_4
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_3
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_4
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_4
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_5
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_3
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_4
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_5
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_6
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_3
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_4
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_5
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_6
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_7
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB_5_2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US1
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US10
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US12
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US15
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US20
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US3
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US30
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US4
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US40
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US5
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US50
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US6
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Bits
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB150
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB90
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBm
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBW
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWHz
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWS
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Deg_Signed
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees90
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Duration
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Elev
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgAm
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgFm
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPFm
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent2
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent3
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngle
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngleRate
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPM
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPS
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PRIChgRate
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanRate
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanSpeed
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_TiltAngRate
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Twips
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_UN16_9
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Years
-
Get a string representation of this data wrapper value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TDate
-
Get the configured value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TDateTime
-
Get the configured value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Gets the SSRF SERIAL number value.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigEmission
-
Get a string representation of this ConfigEmission instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Get a string representation of this ConfigFreq instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Get a string representation of this Notation instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Get a string representation of this NotationTimeline instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Get a string representation of this ObservedERPAnalysis instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPValues
-
Get a string representation of this ObservedERPValues instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.PotentialVictims
-
Get a string representation of this PotentialVictims instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
Get a string representation of this RxAntModeRef instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Get a string representation of this RxModeRef instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Get a string representation of this RxRef instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxAntModeRef
-
Get a string representation of this TxAntModeRef instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxModeRef
-
Get a string representation of this TxModeRef instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Get a string representation of this TxRef instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
Get a string representation of this Usage instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Get a string representation of this Note instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
Get a string representation of this RelatedOrganisation instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Get a string representation of this Organisation instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Get a string representation of this JammingAuthority instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Get a string representation of this JammingPerformance instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Get a string representation of this JammingPlan instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Get a string representation of this JammingTarget instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Get a string representation of this RadiationPlan instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Get a string representation of this Baseband instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Get a string representation of this Curve instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.CurvePoint
-
Get a string representation of this CurvePoint instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Get a string representation of this Deployment instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Get a string representation of this EmsClass instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Get a string representation of this FreqConversion instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Get a string representation of this Installation instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Get a string representation of this RxMode instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Get a string representation of this RxModulation instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Get a string representation of this RxSignalTuning instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Get a string representation of this SpreadSpectrum instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Get a string representation of this Receiver instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.rfsystem.RelatedSystem
-
Get a string representation of this RelatedSystem instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Get a string representation of this RFSystem instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Get a string representation of this Role instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
Get a string representation of this EarthStation instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Get a string representation of this ServiceArea instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Get a string representation of this Satellite instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Get a string representation of this SchemaRoot instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Get a string representation of this Comment instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Get a string representation of this CommentSource instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.StageLocation
-
Get a string representation of this StageLocation instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Get a string representation of this SSReply instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Get a string representation of this DiagramEndpoint instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramLine
-
Get a string representation of this DiagramLine instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Get a string representation of this EndpointLocation instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Get a string representation of this HostNation instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Get a string representation of this RelatedSupportability instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Get a string representation of this Stage instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Time
-
Get a string representation of this Time instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Get a string representation of this SSRequest instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Get a string representation of this Trunking instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Get a string representation of this TrunkingAssignment instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Get a string representation of this Administration instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Get a string representation of this Allocation instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Get a string representation of this Country instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Get a string representation of this Footnote instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Get a string representation of this FreqBand instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Get a string representation of this StnClass instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Get a string representation of this TOA instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Get a string representation of this Variance instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Get a string representation of this ObservedMOPAnalysis instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Get a string representation of this ObservedMOPBits instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Get a string representation of this ObservedMOPSequence instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Get a string representation of this ObservedMOPSweep instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Get a string representation of this ObservedMOPValues instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Get a string representation of this ObservedPulseAnalysis instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Get a string representation of this ObservedPulseValues instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Get a string representation of this ObservedRFAnalysis instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFValues
-
Get a string representation of this ObservedRFValues instance
configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Get a string representation of this Power instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Get a string representation of this Pulse instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Get a string representation of this SubcarrierFreq instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Get a string representation of this SubcarrierTone instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Get a string representation of this Transmitter instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Get a string representation of this TxMode instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Get a string representation of this TxModulation instance configuration.
- toString() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Get a string representation of this TxSignalTuning instance configuration.
- toXML() - Method in class us.gov.dod.standard.ssrf.SSRF
-
Export this SSRF source instance as an XML document.
- transmitter - Variable in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
- Transmitter - Class in us.gov.dod.standard.ssrf._3_1
-
Transmitter is the root element (dataset) containing the transmitter
characteristics.
- Transmitter() - Constructor for class us.gov.dod.standard.ssrf._3_1.Transmitter
-
No arg constructor.
- Trunking - Class in us.gov.dod.standard.ssrf._3_1.ssrequest
-
Trunking (US) defines Radiotelephony using standard land mobile principles
where multiple baseband signals are bounded within one physical channel.
- Trunking() - Constructor for class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
- TrunkingAssignment - Class in us.gov.dod.standard.ssrf._3_1.ssrequest
-
TrunkingAssignment (US) refers to the Agency Serial Number of the existing
assignment to be relinquished or used in the trunked land mobile system.
- TrunkingAssignment() - Constructor for class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
- TSDFValue - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF TSDFValue data type.
- TSDFValue() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.TSDFValue
-
Construct a new, empty TSDFValue instance.
- TSDFValue(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.TSDFValue
-
Construct a new TSDFValue instance with the given initial value.
- TSerial - Class in us.gov.dod.standard.ssrf._3_1.metadata
-
A SSRF SERIAL number container with SSRF Standard Metadata Attributes.
- TSerial(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Construct a new data type instance with the indicated value.
- TString - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
A simple String instance with SSRF Standard Metadata Attributes.
- TString(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.TString
-
Construct a new data type instance with the indicated value.
- TString() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.TString
-
Empty constructor.
- Tuning - Class in us.gov.dod.standard.ssrf._3_1.assignment
-
Tuning indicates the specific frequency or range of frequencies, tuning
increment, and number of frequencies, required for an assignment.
- Tuning() - Constructor for class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
- TxAntModeRef - Class in us.gov.dod.standard.ssrf._3_1.multiple
-
TxAntModeRef contains references to the Antenna and its AntMode, used to
construct a Transmitter Configuration.
- TxAntModeRef() - Constructor for class us.gov.dod.standard.ssrf._3_1.multiple.TxAntModeRef
-
- TxMode - Class in us.gov.dod.standard.ssrf._3_1.transmitter
-
TxMode and its sub-elements define all the technical parameters for a mode of
operation of the Transmitter.
- TxMode() - Constructor for class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
- TxModeRef - Class in us.gov.dod.standard.ssrf._3_1.multiple
-
TxModeRef contains references to the Transmitter and its modes, used to
construct a Configuration.
- TxModeRef() - Constructor for class us.gov.dod.standard.ssrf._3_1.multiple.TxModeRef
-
- TxModulation - Class in us.gov.dod.standard.ssrf._3_1.transmitter
-
TxModulation contains the detailed characteristics of the modulation on the
transmitter side.
- TxModulation() - Constructor for class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
- TxRef - Class in us.gov.dod.standard.ssrf._3_1.multiple
-
TxRef contains the reference of a Transmitter, and optionnally some of its
TxModes and the associated Antennas and AntMode.
- TxRef() - Constructor for class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
- TxSignalTuning - Class in us.gov.dod.standard.ssrf._3_1.transmitter
-
TxSignalTuning indicates the tuning capabilities, the specific frequency or
range of frequencies within which the equipment may tune, and the tuning
increments of the equipment.
- TxSignalTuning() - Constructor for class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
- UN1 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN1 data type.
- UN1() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN1
-
Construct a new, empty UN1 instance.
- UN1(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN1
-
Construct a new UN1 instance with the given initial value.
- UN1(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN1
-
Construct a new UN1 instance with the given initial value.
- UN10 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN10 data type.
- UN10() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10
-
Construct a new, empty UN10 instance.
- UN10(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10
-
Construct a new UN10 instance with the given initial value.
- UN10(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10
-
Construct a new UN10 instance with the given initial value.
- UN10_2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN10_2 data type.
- UN10_2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_2
-
Construct a new, empty UN10_2 instance.
- UN10_2(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_2
-
Construct a new UN10_2 instance with the given initial value.
- UN10_2(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_2
-
Construct a new UN10_2 instance with the given initial value.
- UN10_3 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN10_3 data type.
- UN10_3() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_3
-
Construct a new, empty UN10_3 instance.
- UN10_3(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_3
-
Construct a new UN10_3 instance with the given initial value.
- UN10_3(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_3
-
Construct a new UN10_3 instance with the given initial value.
- UN10_4 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN10_4 data type.
- UN10_4() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_4
-
Construct a new, empty UN10_4 instance.
- UN10_4(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_4
-
Construct a new UN10_4 instance with the given initial value.
- UN10_4(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_4
-
Construct a new UN10_4 instance with the given initial value.
- UN10_6 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN10_6 data type.
- UN10_6() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_6
-
Construct a new, empty UN10_6 instance.
- UN10_6(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_6
-
Construct a new UN10_6 instance with the given initial value.
- UN10_6(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN10_6
-
Construct a new UN10_6 instance with the given initial value.
- UN11_8 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN11_8 data type.
- UN11_8() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN11_8
-
Construct a new, empty UN11_8 instance.
- UN11_8(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN11_8
-
Construct a new UN11_8 instance with the given initial value.
- UN11_8(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN11_8
-
Construct a new UN11_8 instance with the given initial value.
- UN12 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN12 data type.
- UN12() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12
-
Construct a new, empty UN12 instance.
- UN12(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12
-
Construct a new UN12 instance with the given initial value.
- UN12(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12
-
Construct a new UN12 instance with the given initial value.
- UN12_3 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN12_3 data type.
- UN12_3() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_3
-
Construct a new, empty UN12_3 instance.
- UN12_3(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_3
-
Construct a new UN12_3 instance with the given initial value.
- UN12_3(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_3
-
Construct a new UN12_3 instance with the given initial value.
- UN12_4 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN12_4 data type.
- UN12_4() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_4
-
Construct a new, empty UN12_4 instance.
- UN12_4(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_4
-
Construct a new UN12_4 instance with the given initial value.
- UN12_4(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_4
-
Construct a new UN12_4 instance with the given initial value.
- UN12_6 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN12_6 data type.
- UN12_6() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_6
-
Construct a new, empty UN12_6 instance.
- UN12_6(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_6
-
Construct a new UN12_6 instance with the given initial value.
- UN12_6(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN12_6
-
Construct a new UN12_6 instance with the given initial value.
- UN16 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN16 data type.
- UN16() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16
-
Construct a new, empty UN16 instance.
- UN16(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16
-
Construct a new UN16 instance with the given initial value.
- UN16(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16
-
Construct a new UN16 instance with the given initial value.
- UN16_15 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN16_15 data type.
- UN16_15() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16_15
-
Construct a new, empty UN16_15 instance.
- UN16_15(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16_15
-
Construct a new UN16_15 instance with the given initial value.
- UN16_15(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN16_15
-
Construct a new UN16_15 instance with the given initial value.
- UN18_6 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN18_6 data type.
- UN18_6() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN18_6
-
Construct a new, empty UN18_6 instance.
- UN18_6(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN18_6
-
Construct a new UN18_6 instance with the given initial value.
- UN18_6(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN18_6
-
Construct a new UN18_6 instance with the given initial value.
- UN2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN2 data type.
- UN2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2
-
Construct a new, empty UN2 instance.
- UN2(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2
-
Construct a new UN2 instance with the given initial value.
- UN2(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2
-
Construct a new UN2 instance with the given initial value.
- UN2_1 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN2_1 data type.
- UN2_1() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2_1
-
Construct a new, empty UN2_1 instance.
- UN2_1(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2_1
-
Construct a new UN2_1 instance with the given initial value.
- UN2_1(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN2_1
-
Construct a new UN2_1 instance with the given initial value.
- UN3 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN3 data type.
- UN3() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3
-
Construct a new, empty UN3 instance.
- UN3(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3
-
Construct a new UN3 instance with the given initial value.
- UN3(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3
-
Construct a new UN3 instance with the given initial value.
- UN3_1 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN3_1 data type.
- UN3_1() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_1
-
Construct a new, empty UN3_1 instance.
- UN3_1(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_1
-
Construct a new UN3_1 instance with the given initial value.
- UN3_1(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_1
-
Construct a new UN3_1 instance with the given initial value.
- UN3_2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN3_2 data type.
- UN3_2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_2
-
Construct a new, empty UN3_2 instance.
- UN3_2(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_2
-
Construct a new UN3_2 instance with the given initial value.
- UN3_2(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN3_2
-
Construct a new UN3_2 instance with the given initial value.
- UN4 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN4 data type.
- UN4() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4
-
Construct a new, empty UN4 instance.
- UN4(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4
-
Construct a new UN4 instance with the given initial value.
- UN4(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4
-
Construct a new UN4 instance with the given initial value.
- UN4_1 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN4_1 data type.
- UN4_1() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_1
-
Construct a new, empty UN4_1 instance.
- UN4_1(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_1
-
Construct a new UN4_1 instance with the given initial value.
- UN4_1(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_1
-
Construct a new UN4_1 instance with the given initial value.
- UN4_2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN4_2 data type.
- UN4_2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_2
-
Construct a new, empty UN4_2 instance.
- UN4_2(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_2
-
Construct a new UN4_2 instance with the given initial value.
- UN4_2(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN4_2
-
Construct a new UN4_2 instance with the given initial value.
- UN5 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN5 data type.
- UN5() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5
-
Construct a new, empty UN5 instance.
- UN5(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5
-
Construct a new UN5 instance with the given initial value.
- UN5(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5
-
Construct a new UN5 instance with the given initial value.
- UN5_1 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN5_1 data type.
- UN5_1() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_1
-
Construct a new, empty UN5_1 instance.
- UN5_1(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_1
-
Construct a new UN5_1 instance with the given initial value.
- UN5_1(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_1
-
Construct a new UN5_1 instance with the given initial value.
- UN5_2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN5_2 data type.
- UN5_2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_2
-
Construct a new, empty UN5_2 instance.
- UN5_2(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_2
-
Construct a new UN5_2 instance with the given initial value.
- UN5_2(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_2
-
Construct a new UN5_2 instance with the given initial value.
- UN5_3 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN5_3 data type.
- UN5_3() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_3
-
Construct a new, empty UN5_3 instance.
- UN5_3(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_3
-
Construct a new UN5_3 instance with the given initial value.
- UN5_3(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_3
-
Construct a new UN5_3 instance with the given initial value.
- UN5_4 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN5_4 data type.
- UN5_4() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_4
-
Construct a new, empty UN5_4 instance.
- UN5_4(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_4
-
Construct a new UN5_4 instance with the given initial value.
- UN5_4(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN5_4
-
Construct a new UN5_4 instance with the given initial value.
- UN6 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN6 data type.
- UN6() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6
-
Construct a new, empty UN6 instance.
- UN6(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6
-
Construct a new UN6 instance with the given initial value.
- UN6(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6
-
Construct a new UN6 instance with the given initial value.
- UN6_1 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN6_1 data type.
- UN6_1() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_1
-
Construct a new, empty UN6_1 instance.
- UN6_1(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_1
-
Construct a new UN6_1 instance with the given initial value.
- UN6_1(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_1
-
Construct a new UN6_1 instance with the given initial value.
- UN6_2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN6_2 data type.
- UN6_2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_2
-
Construct a new, empty UN6_2 instance.
- UN6_2(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_2
-
Construct a new UN6_2 instance with the given initial value.
- UN6_2(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_2
-
Construct a new UN6_2 instance with the given initial value.
- UN6_3 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN6_3 data type.
- UN6_3() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_3
-
Construct a new, empty UN6_3 instance.
- UN6_3(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_3
-
Construct a new UN6_3 instance with the given initial value.
- UN6_3(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_3
-
Construct a new UN6_3 instance with the given initial value.
- UN6_4 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN6_4 data type.
- UN6_4() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_4
-
Construct a new, empty UN6_4 instance.
- UN6_4(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_4
-
Construct a new UN6_4 instance with the given initial value.
- UN6_4(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN6_4
-
Construct a new UN6_4 instance with the given initial value.
- UN7 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN7 data type.
- UN7() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7
-
Construct a new, empty UN7 instance.
- UN7(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7
-
Construct a new UN7 instance with the given initial value.
- UN7(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7
-
Construct a new UN7 instance with the given initial value.
- UN7_1 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN7_1 data type.
- UN7_1() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_1
-
Construct a new, empty UN7_1 instance.
- UN7_1(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_1
-
Construct a new UN7_1 instance with the given initial value.
- UN7_1(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_1
-
Construct a new UN7_1 instance with the given initial value.
- UN7_2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN7_2 data type.
- UN7_2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_2
-
Construct a new, empty UN7_2 instance.
- UN7_2(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_2
-
Construct a new UN7_2 instance with the given initial value.
- UN7_2(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_2
-
Construct a new UN7_2 instance with the given initial value.
- UN7_4 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN7_4 data type.
- UN7_4() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_4
-
Construct a new, empty UN7_4 instance.
- UN7_4(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_4
-
Construct a new UN7_4 instance with the given initial value.
- UN7_4(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_4
-
Construct a new UN7_4 instance with the given initial value.
- UN7_5 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN7_5 data type.
- UN7_5() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_5
-
Construct a new, empty UN7_5 instance.
- UN7_5(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_5
-
Construct a new UN7_5 instance with the given initial value.
- UN7_5(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN7_5
-
Construct a new UN7_5 instance with the given initial value.
- UN8 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN8 data type.
- UN8() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8
-
Construct a new, empty UN8 instance.
- UN8(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8
-
Construct a new UN8 instance with the given initial value.
- UN8(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8
-
Construct a new UN8 instance with the given initial value.
- UN8_2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN8_2 data type.
- UN8_2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_2
-
Construct a new, empty UN8_2 instance.
- UN8_2(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_2
-
Construct a new UN8_2 instance with the given initial value.
- UN8_2(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_2
-
Construct a new UN8_2 instance with the given initial value.
- UN8_3 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN8_3 data type.
- UN8_3() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_3
-
Construct a new, empty UN8_3 instance.
- UN8_3(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_3
-
Construct a new UN8_3 instance with the given initial value.
- UN8_3(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_3
-
Construct a new UN8_3 instance with the given initial value.
- UN8_4 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN8_4 data type.
- UN8_4() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_4
-
Construct a new, empty UN8_4 instance.
- UN8_4(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_4
-
Construct a new UN8_4 instance with the given initial value.
- UN8_4(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_4
-
Construct a new UN8_4 instance with the given initial value.
- UN8_5 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN8_5 data type.
- UN8_5() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_5
-
Construct a new, empty UN8_5 instance.
- UN8_5(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_5
-
Construct a new UN8_5 instance with the given initial value.
- UN8_5(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_5
-
Construct a new UN8_5 instance with the given initial value.
- UN8_6 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN8_6 data type.
- UN8_6() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_6
-
Construct a new, empty UN8_6 instance.
- UN8_6(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_6
-
Construct a new UN8_6 instance with the given initial value.
- UN8_6(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN8_6
-
Construct a new UN8_6 instance with the given initial value.
- UN9 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN9 data type.
- UN9() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9
-
Construct a new, empty UN9 instance.
- UN9(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9
-
Construct a new UN9 instance with the given initial value.
- UN9(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9
-
Construct a new UN9 instance with the given initial value.
- UN9_1 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN9_1 data type.
- UN9_1() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_1
-
Construct a new, empty UN9_1 instance.
- UN9_1(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_1
-
Construct a new UN9_1 instance with the given initial value.
- UN9_1(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_1
-
Construct a new UN9_1 instance with the given initial value.
- UN9_3 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN9_3 data type.
- UN9_3() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_3
-
Construct a new, empty UN9_3 instance.
- UN9_3(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_3
-
Construct a new UN9_3 instance with the given initial value.
- UN9_3(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_3
-
Construct a new UN9_3 instance with the given initial value.
- UN9_4 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN9_4 data type.
- UN9_4() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_4
-
Construct a new, empty UN9_4 instance.
- UN9_4(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_4
-
Construct a new UN9_4 instance with the given initial value.
- UN9_4(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_4
-
Construct a new UN9_4 instance with the given initial value.
- UN9_5 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN9_5 data type.
- UN9_5() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_5
-
Construct a new, empty UN9_5 instance.
- UN9_5(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_5
-
Construct a new UN9_5 instance with the given initial value.
- UN9_5(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_5
-
Construct a new UN9_5 instance with the given initial value.
- UN9_6 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN9_6 data type.
- UN9_6() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_6
-
Construct a new, empty UN9_6 instance.
- UN9_6(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_6
-
Construct a new UN9_6 instance with the given initial value.
- UN9_6(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_6
-
Construct a new UN9_6 instance with the given initial value.
- UN9_7 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF UN9_7 data type.
- UN9_7() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_7
-
Construct a new, empty UN9_7 instance.
- UN9_7(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_7
-
Construct a new UN9_7 instance with the given initial value.
- UN9_7(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.UN9_7
-
Construct a new UN9_7 instance with the given initial value.
- unmarshal(String) - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterCalendar
-
Convert a value type to a bound type.
- unmarshal(String) - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterInteger
-
Convert a value type to a bound type.
- unmarshal(String) - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterNumber
-
Convert a value type to a bound type.
- unmarshal(String) - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterString
-
Convert a value type to a bound type.
- unmarshal(String) - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterTNumber
-
Deprecated.
Convert a value type to a bound type.
- unmarshal(String) - Method in class us.gov.dod.standard.ssrf._3_1.adapter.AXmlAdapterTString
-
Convert a value type to a bound type.
- unmarshal(String) - Method in class us.gov.dod.standard.ssrf._3_1.adapter.XmlAdapterLAT
-
Convert a bound type to a value type.
- unmarshal(String) - Method in class us.gov.dod.standard.ssrf._3_1.adapter.XmlAdapterLON
-
Convert a bound type to a value type.
- unmarshal(String, Class<T>) - Static method in class us.gov.dod.standard.ssrf.SSRFUtility
-
Parse an XML file into a container class.
- unsetAddress() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Clear the Address field.
- unsetAddress() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Clear the Address field.
- unsetAddress() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Clear the Address field.
- unsetAdministration() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Clear the Administration field.
- unsetAdministrative() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the Administrative field.
- unsetAllocation() - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Clear the Allocation field.
- unsetAllotFreq() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Clear the AllotFreq field.
- unsetAllotment() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the Allotment field.
- unsetAntEfficiency() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Clear the AntEfficiency field.
- unsetAntenna() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the Antenna field.
- unsetAntFreqs() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Clear the AntFreqs field.
- unsetAntGain() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Clear the AntGain field.
- unsetAntHardware() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Clear the AntHardware field.
- unsetAntMode() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Clear the AntMode field.
- unsetAntPattern() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Clear the AntPattern field.
- unsetAntPatternPoint() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Clear the AntPatternPoint field.
- unsetAsgnAllotOwner() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the AsgnAllotOwner field.
- unsetAssets() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Clear the Assets field.
- unsetAssigned() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Clear the Assigned field.
- unsetAssignment() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the Assignment field.
- unsetAtWaypoint() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Clear the AtWaypoint field.
- unsetBaseband() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Clear the Baseband field.
- unsetBaseband() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Clear the Baseband field.
- unsetBlanking() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Clear the Blanking field.
- unsetCaseNum() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Clear the CaseNum field.
- unsetCaseNum() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Clear the CaseNum field.
- unsetChannel() - Method in class us.gov.dod.standard.ssrf._3_1.ChannelPlan
-
Clear the Channel field.
- unsetChannelFreq() - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Clear the ChannelFreq field.
- unsetChannelPlan() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the ChannelPlan field.
- unsetChannelPlanRef() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Clear the ChannelPlanRef field.
- unsetChannelPlanRef() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Clear the ChannelPlanRef field.
- unsetCircuitRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the CircuitRemarks field.
- unsetClsDerived() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Clear the ClsDerived field.
- unsetCode() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Clear the Code field.
- unsetCodeList() - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Clear the CodeList field.
- unsetComment() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Clear the Comment field.
- unsetCommentSource() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Clear the CommentSource field.
- unsetConfigEmission() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Clear the ConfigEmission field.
- unsetConfigFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Clear the ConfigFreq field.
- unsetConfiguration() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the Configuration field.
- unsetConfiguration() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Clear the Configuration field.
- unsetConfiguration() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Clear the Configuration field.
- unsetConfiguration() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Clear the Configuration field.
- unsetContact() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the Contact field.
- unsetContactRef() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Clear the ContactRef field.
- unsetCoordinationData() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the CoordinationData field.
- unsetCountry() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Clear the Country field.
- unsetCurve() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Clear the Curve field.
- unsetCurve() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Clear the Curve field.
- unsetCurvePoint() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Clear the CurvePoint field.
- unsetCurves() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Clear the Curves field.
- unsetCurves() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Clear the Curves field.
- unsetDataset() - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Clear the Dataset field.
- unsetDatasetRef() - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Clear the DatasetRef field.
- unsetDCSTrunk() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Clear the DCSTrunk field.
- unsetDeployment() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Clear the Deployment field.
- unsetDeployment() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Clear the Deployment field.
- unsetDeployment() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Clear the Deployment field.
- unsetDetailedFunction() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Clear the DetailedFunction field.
- unsetDiagramEndpoint() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Clear the DiagramEndpoint field.
- unsetDiagramLine() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Clear the DiagramLine field.
- unsetDocketNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the DocketNum field.
- unsetDowngrade() - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Clear the Downgrade field.
- unsetEarthStation() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Clear the EarthStation field.
- unsetEllipse() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Clear the Ellipse field.
- unsetEMail() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Clear the EMail field.
- unsetEMail() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Clear the EMail field.
- unsetEMail() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Clear the EMail field.
- unsetEmission() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Clear the Emission field.
- unsetEmsClass() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Clear the EmsClass field.
- unsetEmsClass() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Clear the EmsClass field.
- unsetEndpointLocation() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Clear the EndpointLocation field.
- unsetExternalReference() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the ExternalReference field.
- unsetExtReferenceRef() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Clear the ExtReferenceRef field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Clear the ExtReferences field.
- unsetExtReferences() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Clear the ExtReferences field.
- unsetFEDeployment() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the FEDeployment field.
- unsetFootnote() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Clear the Footnote field.
- unsetFootnotes() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Clear the Footnotes field.
- unsetFootnotes() - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Clear the Footnotes field.
- unsetForceElement() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the ForceElement field.
- unsetFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Clear the Freq field.
- unsetFreqBand() - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Clear the FreqBand field.
- unsetFreqConversion() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Clear the FreqConversion field.
- unsetFreqOld() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Clear the FreqOld field.
- unsetHostDocketNum() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the HostDocketNum field.
- unsetHostNation() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Clear the HostNation field.
- unsetInstallation() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Clear the Installation field.
- unsetIntfReport() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the IntfReport field.
- unsetJammingAuthority() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Clear the JammingAuthority field.
- unsetJammingChannelProfile() - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Clear the JammingChannelProfile field.
- unsetJammingPerformance() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Clear the JammingPerformance field.
- unsetJammingPlan() - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Clear the JammingPlan field.
- unsetJammingTarget() - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Clear the JammingTarget field.
- unsetJRFL() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the JRFL field.
- unsetJRFLEntry() - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Clear the JRFLEntry field.
- unsetJRFLEntryLocation() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Clear the JRFLEntryLocation field.
- unsetLink() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the Link field.
- unsetLoadset() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the Loadset field.
- unsetLoadsetRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Clear the LoadsetRef field.
- unsetLocation() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the Location field.
- unsetLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Clear the LocationRef field.
- unsetLocationRef() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Clear the LocationRef field.
- unsetLocationRestrictionRef() - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Clear the LocationRestriction field.
- unsetManufacturer() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Clear the Manufacturer field.
- unsetMessage() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the Message field.
- unsetMissingRef() - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Clear the MissingRef field.
- unsetNarrowBandPlanning() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Clear the NarrowBandPlanning field.
- unsetNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Clear the Nomenclature field.
- unsetNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Clear the Nomenclature field.
- unsetNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Clear the Nomenclature field.
- unsetNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Clear the Nomenclature field.
- unsetNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Clear the Nomenclature field.
- unsetNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Clear the Nomenclature field.
- unsetNomenclature() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Clear the Nomenclature field.
- unsetNotation() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Clear the Notation field.
- unsetNotationTimeline() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Clear the NotationTimeline field.
- unsetNote() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the Note field.
- unsetObservedERPAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Clear the ObservedERPAnalysis field.
- unsetObservedERPValues() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Clear the ObservedERPValues field.
- unsetObservedLobeAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Clear the ObservedLobeAnalysis field.
- unsetObservedLobeValues() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Clear the ObservedLobeValues field.
- unsetObservedMOPAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Clear the ObservedMOPAnalysis field.
- unsetObservedMOPBits() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Clear the ObservedMOPBits field.
- unsetObservedMOPSequence() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Clear the ObservedMOPSequence field.
- unsetObservedMOPSweep() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Clear the ObservedMOPSweep field.
- unsetObservedMOPValues() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Clear the ObservedMOPValues field.
- unsetObservedPolarisationAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Clear the ObservedPolarisationAnalysis field.
- unsetObservedPolarisationValues() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Clear the ObservedPolarisationValues field.
- unsetObservedPulseAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Clear the ObservedPulseAnalysis field.
- unsetObservedPulseValues() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Clear the ObservedPulseValues field.
- unsetObservedRFAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Clear the ObservedRFAnalysis field.
- unsetObservedRFValues() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Clear the ObservedRFValues field.
- unsetObservedScanAnalysis() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Clear the ObservedScanAnalysis field.
- unsetObservedScanValues() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Clear the ObservedScanValues field.
- unsetOffTheShelfEquipment() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the OffTheShelfEquipment field.
- unsetOrganisation() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the Organisation field.
- unsetPairedFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Clear the PairedFreq field.
- unsetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Clear the POCInformation field.
- unsetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Clear the POCInformation field.
- unsetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Clear the POCInformation field.
- unsetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the POCInformation field.
- unsetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Clear the POCInformation field.
- unsetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Clear the POCInformation field.
- unsetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Clear the POCInformation field.
- unsetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Clear the POCInformation field.
- unsetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Clear the POCInformation field.
- unsetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Clear the POCInformation field.
- unsetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Clear the POCInformation field.
- unsetPOCInformation() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Clear the POCInformation field.
- unsetPoint() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Clear the Point field.
- unsetPolygon() - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Clear the Polygon field.
- unsetPolygonPoint() - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Clear the PolygonPoint field.
- unsetPotentialVictims() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Clear the PotentialVictims field.
- unsetPower() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Clear the Power field.
- unsetPreviousAuthorization() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the PreviousAuthorization field.
- unsetProject() - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Clear the Project field.
- unsetProject() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the Project field.
- unsetProject() - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Clear the Project field.
- unsetProject() - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Clear the Project field.
- unsetProject() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Clear the Project field.
- unsetProperty(String) - Method in class us.gov.dod.standard.ssrf.SSRF
-
Unset (clear) a SSRF property.
- unsetPulse() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Clear the Pulse field.
- unsetRadiationPlan() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the RadiationPlan field.
- unsetReceiver() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the Receiver field.
- unsetRecordNote() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the RecordNote field.
- unsetRelatedOrganisation() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Clear the RelatedOrganisation field.
- unsetRelatedRef() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the RelatedRef field.
- unsetRelatedSupportability() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Clear the RelatedSupportability field.
- unsetRelatedSystem() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Clear the RelatedSystem field.
- unsetReleasability() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Clear the Releasability field.
- unsetRemarkRef() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Clear the RemarkRef field.
- unsetRemarkRef() - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Clear the RemarkIndex field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Clear the Remarks field.
- unsetRemarks() - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Clear the Remarks field.
- unsetRequestedFreq() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Clear the RequestedFreq field.
- unsetRFSystem() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the RFSystem field.
- unsetRFSystemRef() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Clear the RFSystemRef field.
- unsetRole() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the Role field.
- unsetRoleRef() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Clear the RoleRef field.
- unsetRxAntModeRef() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Clear the RxAntModeRef field.
- unsetRxMode() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Clear the RxMode field.
- unsetRxModeRef() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Clear the RxModeRef field.
- unsetRxModulation() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Clear the RxModulation field.
- unsetRxRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Clear the RxRef field.
- unsetRxSignalTuning() - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Clear the RxSignalTuning field.
- unsetSatellite() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the Satellite field.
- unsetServiceArea() - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Clear the ServiceArea field.
- unsetSSReply() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the SSReply field.
- unsetSSRequest() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the SSRequest field.
- unsetStage() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Clear the Stage field.
- unsetStageLocation() - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Clear the StageLocation field.
- unsetStageLocation() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Clear the StageLocation field.
- unsetStation() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the Station field.
- unsetStationConfig() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Clear the StationConfig field.
- unsetStationLoc() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Clear the StationLoc field.
- unsetStatusLog() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the StatusLog field.
- unsetStatusLog() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Clear the StatusLog field.
- unsetStnClass() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Clear the StnClass field.
- unsetStockNum() - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Clear the StockNum field.
- unsetStockNum() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Clear the StockNum field.
- unsetSubcarrierFreq() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Clear the SubcarrierFreq field.
- unsetSubcarrierTone() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Clear the SubcarrierTone field.
- unsetSysOfStation() - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Clear the SysOfStation field.
- unsetTelephoneFax() - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Clear the TelephoneFax field.
- unsetTelephoneFax() - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Clear the TelephoneFax field.
- unsetTelephoneFax() - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Clear the TelephoneFax field.
- unsetTime() - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Clear the Time field.
- unsetTimingDeconflictionProtocol() - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Clear the TimingDeconflictionProtocol field.
- unsetTOA() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the TOA field.
- unsetTransmitter() - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Clear the Transmitter field.
- unsetTrunkingAssignment() - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Clear the TrunkingAssignment field.
- unsetTuning() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Clear the Tuning field.
- unsetTxAntModeRef() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Clear the TxAntModeRef field.
- unsetTxMode() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Clear the TxMode field.
- unsetTxModeRef() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Clear the TxModeRef field.
- unsetTxModulation() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Clear the TxModulation field.
- unsetTxRef() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Clear the TxRef field.
- unsetTxSignalTuning() - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Clear the TxSignalTuning field.
- unsetUsage() - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Clear the Usage field.
- unsetUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Clear the UsingCountries field.
- unsetUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Clear the UsingCountries field.
- unsetUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Clear the UsingCountries field.
- unsetUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Clear the UsingCountries field.
- unsetUsingCountries() - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Clear the UsingCountries field.
- unsetVariance() - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Clear the Variance field.
- unsetVSWR() - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Clear the VSWR field.
- Unsigned_DB - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF Unsigned_DB data type.
- Unsigned_DB() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB
-
Construct a new, empty Unsigned_DB instance.
- Unsigned_DB(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB
-
Construct a new Unsigned_DB instance with the given initial value.
- Unsigned_DB(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB
-
Construct a new Unsigned_DB instance with the given initial value.
- Unsigned_DB_5_2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF Unsigned_DB_5_2 data type.
- Unsigned_DB_5_2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB_5_2
-
Construct a new, empty Unsigned_DB_5_2 instance.
- Unsigned_DB_5_2(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB_5_2
-
Construct a new Unsigned_DB_5_2 instance with the given initial value.
- Unsigned_DB_5_2(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.Unsigned_DB_5_2
-
Construct a new Unsigned_DB_5_2 instance with the given initial value.
- us.gov.dod.standard.ssrf - package us.gov.dod.standard.ssrf
-
- us.gov.dod.standard.ssrf._3_1 - package us.gov.dod.standard.ssrf._3_1
-
- us.gov.dod.standard.ssrf._3_1.adapter - package us.gov.dod.standard.ssrf._3_1.adapter
-
- us.gov.dod.standard.ssrf._3_1.adapter.types - package us.gov.dod.standard.ssrf._3_1.adapter.types
-
- us.gov.dod.standard.ssrf._3_1.administrative - package us.gov.dod.standard.ssrf._3_1.administrative
-
- us.gov.dod.standard.ssrf._3_1.allotment - package us.gov.dod.standard.ssrf._3_1.allotment
-
- us.gov.dod.standard.ssrf._3_1.antenna - package us.gov.dod.standard.ssrf._3_1.antenna
-
- us.gov.dod.standard.ssrf._3_1.assignment - package us.gov.dod.standard.ssrf._3_1.assignment
-
- us.gov.dod.standard.ssrf._3_1.channelplan - package us.gov.dod.standard.ssrf._3_1.channelplan
-
- us.gov.dod.standard.ssrf._3_1.common - package us.gov.dod.standard.ssrf._3_1.common
-
- us.gov.dod.standard.ssrf._3_1.contact - package us.gov.dod.standard.ssrf._3_1.contact
-
- us.gov.dod.standard.ssrf._3_1.fedeployment - package us.gov.dod.standard.ssrf._3_1.fedeployment
-
- us.gov.dod.standard.ssrf._3_1.forceelement - package us.gov.dod.standard.ssrf._3_1.forceelement
-
- us.gov.dod.standard.ssrf._3_1.jrfl - package us.gov.dod.standard.ssrf._3_1.jrfl
-
- us.gov.dod.standard.ssrf._3_1.loadset - package us.gov.dod.standard.ssrf._3_1.loadset
-
- us.gov.dod.standard.ssrf._3_1.location - package us.gov.dod.standard.ssrf._3_1.location
-
- us.gov.dod.standard.ssrf._3_1.metadata - package us.gov.dod.standard.ssrf._3_1.metadata
-
- us.gov.dod.standard.ssrf._3_1.metadata.domains - package us.gov.dod.standard.ssrf._3_1.metadata.domains
-
- us.gov.dod.standard.ssrf._3_1.metadata.lists - package us.gov.dod.standard.ssrf._3_1.metadata.lists
-
- us.gov.dod.standard.ssrf._3_1.multiple - package us.gov.dod.standard.ssrf._3_1.multiple
-
- us.gov.dod.standard.ssrf._3_1.organisation - package us.gov.dod.standard.ssrf._3_1.organisation
-
- us.gov.dod.standard.ssrf._3_1.radiationplan - package us.gov.dod.standard.ssrf._3_1.radiationplan
-
- us.gov.dod.standard.ssrf._3_1.receiver - package us.gov.dod.standard.ssrf._3_1.receiver
-
- us.gov.dod.standard.ssrf._3_1.rfsystem - package us.gov.dod.standard.ssrf._3_1.rfsystem
-
- us.gov.dod.standard.ssrf._3_1.satellite - package us.gov.dod.standard.ssrf._3_1.satellite
-
- us.gov.dod.standard.ssrf._3_1.ssreply - package us.gov.dod.standard.ssrf._3_1.ssreply
-
- us.gov.dod.standard.ssrf._3_1.ssrequest - package us.gov.dod.standard.ssrf._3_1.ssrequest
-
- us.gov.dod.standard.ssrf._3_1.toa - package us.gov.dod.standard.ssrf._3_1.toa
-
- us.gov.dod.standard.ssrf._3_1.transmitter - package us.gov.dod.standard.ssrf._3_1.transmitter
-
- US1 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US1 data type.
- US1() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US1
-
Construct a new, empty US1 instance.
- US1(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US1
-
Construct a new US1 instance with the given initial value.
- US10 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US10 data type.
- US10() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US10
-
Construct a new, empty US10 instance.
- US10(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US10
-
Construct a new US10 instance with the given initial value.
- US12 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US12 data type.
- US12() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US12
-
Construct a new, empty US12 instance.
- US12(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US12
-
Construct a new US12 instance with the given initial value.
- US15 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US15 data type.
- US15() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US15
-
Construct a new, empty US15 instance.
- US15(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US15
-
Construct a new US15 instance with the given initial value.
- US2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US2 data type.
- US2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US2
-
Construct a new, empty US2 instance.
- US2(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US2
-
Construct a new US2 instance with the given initial value.
- US20 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US20 data type.
- US20() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US20
-
Construct a new, empty US20 instance.
- US20(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US20
-
Construct a new US20 instance with the given initial value.
- US3 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US3 data type.
- US3() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US3
-
Construct a new, empty US3 instance.
- US3(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US3
-
Construct a new US3 instance with the given initial value.
- US30 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US30 data type.
- US30() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US30
-
Construct a new, empty US30 instance.
- US30(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US30
-
Construct a new US30 instance with the given initial value.
- US4 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US4 data type.
- US4() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US4
-
Construct a new, empty US4 instance.
- US4(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US4
-
Construct a new US4 instance with the given initial value.
- US40 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US40 data type.
- US40() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US40
-
Construct a new, empty US40 instance.
- US40(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US40
-
Construct a new US40 instance with the given initial value.
- US5 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US5 data type.
- US5() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US5
-
Construct a new, empty US5 instance.
- US5(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US5
-
Construct a new US5 instance with the given initial value.
- US50 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US50 data type.
- US50() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US50
-
Construct a new, empty US50 instance.
- US50(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US50
-
Construct a new US50 instance with the given initial value.
- US6 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US6 data type.
- US6() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US6
-
Construct a new, empty US6 instance.
- US6(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US6
-
Construct a new US6 instance with the given initial value.
- US_Bits - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_Bits data type.
- US_Bits() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Bits
-
Construct a new, empty US_Bits instance.
- US_Bits(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Bits
-
Construct a new US_Bits instance with the given initial value.
- US_Bits(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Bits
-
Construct a new US_Bits instance with the given initial value.
- US_DB - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_DB data type.
- US_DB() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB
-
Construct a new, empty US_DB instance.
- US_DB(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB
-
Construct a new US_DB instance with the given initial value.
- US_DB(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB
-
Construct a new US_DB instance with the given initial value.
- US_DB150 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_DB150 data type.
- US_DB150() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB150
-
Construct a new, empty US_DB150 instance.
- US_DB150(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB150
-
Construct a new US_DB150 instance with the given initial value.
- US_DB150(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB150
-
Construct a new US_DB150 instance with the given initial value.
- US_DB90 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_DB90 data type.
- US_DB90() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB90
-
Construct a new, empty US_DB90 instance.
- US_DB90(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB90
-
Construct a new US_DB90 instance with the given initial value.
- US_DB90(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DB90
-
Construct a new US_DB90 instance with the given initial value.
- US_DBm - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_DBm data type.
- US_DBm() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBm
-
Construct a new, empty US_DBm instance.
- US_DBm(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBm
-
Construct a new US_DBm instance with the given initial value.
- US_DBm(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBm
-
Construct a new US_DBm instance with the given initial value.
- US_DBW - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_DBW data type.
- US_DBW() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBW
-
Construct a new, empty US_DBW instance.
- US_DBW(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBW
-
Construct a new US_DBW instance with the given initial value.
- US_DBW(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBW
-
Construct a new US_DBW instance with the given initial value.
- US_DBWHz - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_DBWHz data type.
- US_DBWHz() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWHz
-
Construct a new, empty US_DBWHz instance.
- US_DBWHz(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWHz
-
Construct a new US_DBWHz instance with the given initial value.
- US_DBWHz(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWHz
-
Construct a new US_DBWHz instance with the given initial value.
- US_DBWS - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_DBWS data type.
- US_DBWS() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWS
-
Construct a new, empty US_DBWS instance.
- US_DBWS(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWS
-
Construct a new US_DBWS instance with the given initial value.
- US_DBWS(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_DBWS
-
Construct a new US_DBWS instance with the given initial value.
- US_Deg_Signed - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_Deg_Signed data type.
- US_Deg_Signed() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Deg_Signed
-
Construct a new, empty US_Deg_Signed instance.
- US_Deg_Signed(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Deg_Signed
-
Construct a new US_Deg_Signed instance with the given initial value.
- US_Deg_Signed(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Deg_Signed
-
Construct a new US_Deg_Signed instance with the given initial value.
- US_Degrees - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_Degrees data type.
- US_Degrees() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees
-
Construct a new, empty US_Degrees instance.
- US_Degrees(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees
-
Construct a new US_Degrees instance with the given initial value.
- US_Degrees(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees
-
Construct a new US_Degrees instance with the given initial value.
- US_Degrees90 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_Degrees90 data type.
- US_Degrees90() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees90
-
Construct a new, empty US_Degrees90 instance.
- US_Degrees90(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees90
-
Construct a new US_Degrees90 instance with the given initial value.
- US_Degrees90(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Degrees90
-
Construct a new US_Degrees90 instance with the given initial value.
- US_Duration - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_Duration data type.
- US_Duration() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Duration
-
Construct a new, empty US_Duration instance.
- US_Duration(String) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Duration
-
Construct a new US_Duration instance with the given initial value.
- US_Elev - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_Elev data type.
- US_Elev() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Elev
-
Construct a new, empty US_Elev instance.
- US_Elev(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Elev
-
Construct a new US_Elev instance with the given initial value.
- US_Elev(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Elev
-
Construct a new US_Elev instance with the given initial value.
- US_MOPChgAm - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_MOPChgAm data type.
- US_MOPChgAm() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgAm
-
Construct a new, empty US_MOPChgAm instance.
- US_MOPChgAm(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgAm
-
Construct a new US_MOPChgAm instance with the given initial value.
- US_MOPChgAm(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgAm
-
Construct a new US_MOPChgAm instance with the given initial value.
- US_MOPChgFm - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_MOPChgFm data type.
- US_MOPChgFm() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgFm
-
Construct a new, empty US_MOPChgFm instance.
- US_MOPChgFm(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgFm
-
Construct a new US_MOPChgFm instance with the given initial value.
- US_MOPChgFm(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPChgFm
-
Construct a new US_MOPChgFm instance with the given initial value.
- US_MOPFm - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_MOPFm data type.
- US_MOPFm() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPFm
-
Construct a new, empty US_MOPFm instance.
- US_MOPFm(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPFm
-
Construct a new US_MOPFm instance with the given initial value.
- US_MOPFm(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_MOPFm
-
Construct a new US_MOPFm instance with the given initial value.
- US_Percent - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_Percent data type.
- US_Percent() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent
-
Construct a new, empty US_Percent instance.
- US_Percent(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent
-
Construct a new US_Percent instance with the given initial value.
- US_Percent2 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_Percent2 data type.
- US_Percent2() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent2
-
Construct a new, empty US_Percent2 instance.
- US_Percent2(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent2
-
Construct a new US_Percent2 instance with the given initial value.
- US_Percent2(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent2
-
Construct a new US_Percent2 instance with the given initial value.
- US_Percent3 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_Percent3 data type.
- US_Percent3() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent3
-
Construct a new, empty US_Percent3 instance.
- US_Percent3(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent3
-
Construct a new US_Percent3 instance with the given initial value.
- US_Percent3(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Percent3
-
Construct a new US_Percent3 instance with the given initial value.
- US_PhaseAngle - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_PhaseAngle data type.
- US_PhaseAngle() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngle
-
Construct a new, empty US_PhaseAngle instance.
- US_PhaseAngle(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngle
-
Construct a new US_PhaseAngle instance with the given initial value.
- US_PhaseAngle(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngle
-
Construct a new US_PhaseAngle instance with the given initial value.
- US_PhaseAngleRate - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_PhaseAngleRate data type.
- US_PhaseAngleRate() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngleRate
-
Construct a new, empty US_PhaseAngleRate instance.
- US_PhaseAngleRate(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngleRate
-
Construct a new US_PhaseAngleRate instance with the given initial value.
- US_PhaseAngleRate(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PhaseAngleRate
-
Construct a new US_PhaseAngleRate instance with the given initial value.
- US_PPM - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_PPM data type.
- US_PPM() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPM
-
Construct a new, empty US_PPM instance.
- US_PPM(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPM
-
Construct a new US_PPM instance with the given initial value.
- US_PPM(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPM
-
Construct a new US_PPM instance with the given initial value.
- US_PPS - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_PPS data type.
- US_PPS() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPS
-
Construct a new, empty US_PPS instance.
- US_PPS(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPS
-
Construct a new US_PPS instance with the given initial value.
- US_PPS(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PPS
-
Construct a new US_PPS instance with the given initial value.
- US_PRIChgRate - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_PRIChgRate data type.
- US_PRIChgRate() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PRIChgRate
-
Construct a new, empty US_PRIChgRate instance.
- US_PRIChgRate(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PRIChgRate
-
Construct a new US_PRIChgRate instance with the given initial value.
- US_PRIChgRate(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_PRIChgRate
-
Construct a new US_PRIChgRate instance with the given initial value.
- US_ScanRate - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_ScanRate data type.
- US_ScanRate() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanRate
-
Construct a new, empty US_ScanRate instance.
- US_ScanRate(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanRate
-
Construct a new US_ScanRate instance with the given initial value.
- US_ScanRate(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanRate
-
Construct a new US_ScanRate instance with the given initial value.
- US_ScanSpeed - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_ScanSpeed data type.
- US_ScanSpeed() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanSpeed
-
Construct a new, empty US_ScanSpeed instance.
- US_ScanSpeed(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanSpeed
-
Construct a new US_ScanSpeed instance with the given initial value.
- US_ScanSpeed(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_ScanSpeed
-
Construct a new US_ScanSpeed instance with the given initial value.
- US_TiltAngRate - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_TiltAngRate data type.
- US_TiltAngRate() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_TiltAngRate
-
Construct a new, empty US_TiltAngRate instance.
- US_TiltAngRate(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_TiltAngRate
-
Construct a new US_TiltAngRate instance with the given initial value.
- US_TiltAngRate(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_TiltAngRate
-
Construct a new US_TiltAngRate instance with the given initial value.
- US_Twips - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_Twips data type.
- US_Twips() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Twips
-
Construct a new, empty US_Twips instance.
- US_Twips(BigInteger) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Twips
-
Construct a new US_Twips instance with the given initial value.
- US_Twips(Integer) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_Twips
-
Construct a new US_Twips instance with the given initial value.
- US_UN16_9 - Class in us.gov.dod.standard.ssrf._3_1.metadata.domains
-
The SSRF US_UN16_9 data type.
- US_UN16_9() - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_UN16_9
-
Construct a new, empty US_UN16_9 instance.
- US_UN16_9(BigDecimal) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_UN16_9
-
Construct a new US_UN16_9 instance with the given initial value.
- US_UN16_9(Double) - Constructor for class us.gov.dod.standard.ssrf._3_1.metadata.domains.US_UN16_9
-
Construct a new US_UN16_9 instance with the given initial value.
- Usage - Class in us.gov.dod.standard.ssrf._3_1.multiple
-
Usage identifies how an operational configuration can be used or will be
used.
- Usage() - Constructor for class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
- UsingCountries - Class in us.gov.dod.standard.ssrf._3_1.antenna
-
UsingCountries (US) describes the countries that manufacture (Producing),
supply (Source), and use (Using) the Antenna.
- UsingCountries() - Constructor for class us.gov.dod.standard.ssrf._3_1.antenna.UsingCountries
-
- withAction(ListCAC) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Set the intended type of modification to the given code list.
- withAction(ListCDR) - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Set the action which triggered the transmission, or to be performed upon
reception, of this dataset.
- withActivationPower(Double) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the signal level required to activate the loadset, for systems capable
of selecting multiple power thresholds by sub-band or other region of
interest.
- withActivationTime(Double) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the minimum time required to trigger the jammer after start of signal
reception.
- withActualEffect(ListUWA) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Set the actual impact a jamming mission had on a specific target area.
- withActualPerformance(ListUWB) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Set In Data Item US:ActualPerformance (US), enter the assessed
effectiveness of the service request.
- withAdditionalChannelsRationale(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set a rationale for the additional channels (e.g., channel loading, queuing
times, or new users).
- withAddress(String) - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Set the e-mail address.
- withAddress(Address...) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the Address
- withAddress(Collection<Address>) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the Address
- withAddress(Address...) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the Address
- withAddress(Collection<Address>) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the Address
- withAddress(Address...) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the Address
- withAddress(Collection<Address>) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the Address
- withAdjacentChannelSelectivity(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the ratio in dB between the wanted signal and the maximum level of an
unwanted signal in the adjacent channel which still allows correct
reception of the wanted signal.
- withAdministration(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Set the nation or regulatory body that administers this note.
- withAdministration(String) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the country and/or administration which registered the satellite.
- withAdministration(Administration...) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Set the Administration
- withAdministration(Collection<Administration>) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Set the Administration
- withAdministration(String) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the nation or regulatory body that administers this Table of
Allocations.
- withAdministrative(Administrative...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withAdministrative(Collection<Administrative>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withAffectedCSA(ListUAG) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the responsible Combatant Commander for the geographic area where the
interference occurred and/or the victim's organization.
- withAffectedEquipment(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the nomenclature or description of equipment experiencing the
interference.
- withAgencyActionNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the "An" identifier used to track transactions.
- withAgencyCode(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Set the agency responsible for this status log entry.
- withAgencyComments(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the Agency remarks in the applications processed through the
Interdepartment Radio Advisory Committee (IRAC).
- withAgencySerialNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Set the externally-assigned unique identifier of a frequency assignment.
- withAgencySerialNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the externally-assigned unique identifier of a frequency assignment.
- withAgencySerialNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Set the externally-assigned unique identifier of a frequency assignment.
- withAllocatedByFootnote(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set "Yes" if this service is allocated to this frequency band by footnote
(i.e., the only indication this service is allowed in this band is a
footnote).
- withAllocatedService(ListCSN) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set a radiocommunication service recognized by an administration that is
allocated to this frequency band (e.g., "Fixed Service").
- withAllocatedService(ListCSN) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Set a radiocommunication service recognized by an administration that is
allocated to this frequency band (e.g., "Fixed Service").
- withAllocation(Allocation...) - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Set the Allocation
- withAllocation(Collection<Allocation>) - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Set the Allocation
- withAllotChannel(String) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Set a TACAN channel or net number
- withAllotFreq(AllotFreq...) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the AllotFreq
- withAllotFreq(Collection<AllotFreq>) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the AllotFreq
- withAllotment(Allotment...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withAllotment(Collection<Allotment>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withAlternateIdentifier(String) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set any alternate identifier for the document as needed.
- withAlternateName(String) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set an alternate name or nickname for the organisation.
- withAltitudeMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the minimum or nominal height of the point above the terrain (also
known as "above ground level" AGL).
- withAltitudeMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set the minimum or nominal height of the point above the terrain (also
known as "above ground level" AGL).
- withAltitudeMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Set
- withAltitudeMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the minimum or nominal height of the point above the terrain (also
known as "above ground level" AGL).
- withAltitudeMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set the minimum or nominal height of the point above the terrain (also
known as "above ground level" AGL).
- withAltitudeMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Set
- withAMIdx(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the amplitude modulation index, which is a unitless value for an
amplitude modulation signal derived by dividing the peak modulating voltage
by the peak carrier voltage.
- withAMRMSIdx(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the RMS modulation index when analog or phase modulation is used and
the baseband consists of FDM channels or multiple subcarrier signals.
- withAntEfficiency(AntEfficiency...) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the AntEfficiency
- withAntEfficiency(Collection<AntEfficiency>) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the AntEfficiency
- withAntenna(Antenna) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
Set the reference to an Antenna in this configuration.
- withAntenna(Antenna...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withAntenna(Collection<Antenna>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withAntennaHeight(Double) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Set the antenna height above the ground level.
- withAntFeedpointHeight(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the antenna feed point height above the terrain, in metres.
- withAntFeedpointHeight(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntryLocation
-
Set the antenna feed point height above the terrain, in metres.
- withAntFreqs(AntFreqs...) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the AntFreqs
- withAntFreqs(Collection<AntFreqs>) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the AntFreqs
- withAntGain(AntGain...) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the AntGain
- withAntGain(Collection<AntGain>) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the AntGain
- withAntHardware(AntHardware...) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the AntHardware
- withAntHardware(Collection<AntHardware>) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the AntHardware
- withAntMode(AntMode...) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the AntMode
- withAntMode(Collection<AntMode>) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the AntMode
- withAntPattern(AntPattern...) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the AntPattern
- withAntPattern(Collection<AntPattern>) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the AntPattern
- withAntPatternPoint(AntPatternPoint...) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Set the AntPatternPoint
- withAntPatternPoint(Collection<AntPatternPoint>) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Set the AntPatternPoint
- withAntStabilisation(ListUWG) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the method by which the jamming antenna beam is focused.
- withAntStructureHeight(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the overall height, of the antenna support structure above ground
level.
- withAntType(ListCAT) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the type of antenna.
- withApertureDiameter(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the cross-section of an antenna radiation pattern in the direction of
highest gain.
- withApplicationDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the date on which the application will be submitted to the appropriate
spectrum management office.
- withApplicationDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the date on which the application will be submitted to the appropriate
spectrum management office.
- withApplicationSPSNumber(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the application Spectrum Planning Subcommittee (SPS) document
identifier assigned by NTIA.
- withApprovalLevel(ListCTS) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the approval status of the JRFL entry.
- withApprovalSPSNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the Certification of Spectrum Support Spectrum Planning Subcommittee
(SPS) document identifier assigned by NTIA.
- withApprovedBy(String) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the identifier of the designated expert who last approved or accepted
the dataset.
- withApprovedDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the last date and time, based on Greenwich Mean Time (GMT), that the
dataset was approved or accepted by a designated expert.
- withApprovedDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the last date and time, based on Greenwich Mean Time (GMT), that the
dataset was approved or accepted by a designated expert.
- withAsgnAllotOwner(AsgnAllotOwner...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:AsgnAllotOwner
- withAsgnAllotOwner(Collection<AsgnAllotOwner>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:AsgnAllotOwner
- withAsgnAllotRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
- withAsset(Common<?>) - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
Set a reference to a Transmitter, Receiver, Antenna, RFSystem used by this
ForceElement, or to a ForceElement carried by or belonging to this
ForceElement.
- withAssets(Assets...) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the Assets
- withAssets(Collection<Assets>) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the Assets
- withAssigned(Assigned...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set the Assigned
- withAssigned(Collection<Assigned>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set the Assigned
- withAssignment(Assignment) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Set a reference to an Assignment that is paired with this AsgnAllot in a
repeater, duplex link or frequency diversity capability.
- withAssignment(Assignment...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withAssignment(Collection<Assignment>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withAssignmentAllotment(Common<?>) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the Serial reference of the Assignment or Allotment to be protected.
- withAssignmentAuthority(ListCHN) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the user acceptance of host-nation or NATO HQ frequency nominations.
- withAssignmentDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date the assignment was most recently authorized.
- withAssignmentDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date the assignment was most recently authorized.
- withAssignmentRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
- withAtWaypoint(AtWaypoint...) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the AtWayPoint
- withAtWaypoint(Collection<AtWaypoint>) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the AtWayPoint
- withAuthor(String) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the name of the author of the reference, if it cannot be covered by a
ContactRef.
- withAuthor(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Set the title (e.g., Ms., Dr.) and name of the individual that is the
source of the comment.
- withAuthorised(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
Set the authorised quantity of the referenced equipment or system.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailability(ListAvailability) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set the availability (US) data supporting legacy equipment certification
business practice of entering "Unknown", "N/A", "Not Available" or "Not
Applicable", when data is not available.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailability(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set In attribute availability (US), enter data supporting legacy equipment
certification business practice of entering "Unknown", "N/A", "Not
Available" or "Not Applicable", when data is not available.
- withAvailable(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
Set the available quantity of the referenced equipment or system.
- withAvgPowerMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the maximum average power.
- withAvgPowerMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the minimum or nominal average power.
- withAxialRatio(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the ratio of the polarisation ellipse major axis to its minor axis
expressed in decibels.
- withAzBoresightAngle(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the position of the emitter Mainbeam (aka, Mainlobe) boresight
referenced from true north for ground based fixed emitters, and the emitter
defined centerline for other platforms (e.g., mobile, airborne, shipborne).
- withAzimuth(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the angle of the semi-major axis in the horizontal plane, measured from
true North.
- withAzScanChangeRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the rate of change for horizontal Scan Period variations expressed in
Scan Period change per unit of time
- withAzScanRateExtremeMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the range of horizontal scan rate values that represent 100% of the
signal observed Scan values obtained from a statistical study of a data
set.
- withAzScanRateExtremeMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the range of horizontal scan rate values that represent 100% of the
signal observed Scan values obtained from a statistical study of a data
set.
- withAzScanRateMean(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the average horizontal scan rate value for a signal that changes
horizontal scan rates on a non-patterned basis.
- withAzScanRateMedian(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the horizontal scan rate that the signal most often used, based on a
statistical study of a data set.
- withAzScanSector(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the total angular width in the horizontal plane (aka, azimuth) the
subject emitter antenna mainbeam (aka, mainlobe) scans/covers in one
complete scan.
- withAzScanSectorMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the total angular width in the horizontal plane (aka, azimuth) the
subject emitter antenna mainbeam (aka, mainlobe) is capable of scanning.
- withAzScanVelocity(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the horizontal angular speed (i.e., degrees per second) of the subject
emitter Mainbeam (aka., mainlobe) scan referenced to a fixed point.
- withAzStart(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Set the start azimuth angle for the blanked sector.
- withAzStop(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Set the stop azimuth angle for the blanked sector.
- withBandwidth(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Set In Data Item Bandwidth, as an alternative to FreqMin/FreqMax, enter the
total operating bandwidth of the Antenna centered around FreqMin.
- withBandwidth(Double) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the width of the range (or band) of restricted frequency(s).
- withBaseband(Baseband...) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the Baseband
- withBaseband(Collection<Baseband>) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the Baseband
- withBaseband(Baseband...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the Baseband
- withBaseband(Collection<Baseband>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the Baseband
- withBeamType(ListCBD) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set one of the codes describing the shape or type of the antenna main beam.
- withBeamType(ListCBD) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Set In Data Item BeamType (US), indicate the pattern beam type that best
represents the general shape of the beam as it radiates from the antenna.
- withBearing(Double) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the bearing of the target in degrees referenced to the "boresight" of
the jammer equipment or the platform that the jammer equipment is mounted
on.
- withBitDuration(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the period of elapsed time, per bit instance, before change of states.
- withBitDuration(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set the shortest time interval (within a pulse for pulsed signals) that a
discrete frequency, phase, or amplitude value stays at its state before
changing to a new one.
- withBitRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set the rate at which the signal exhibits a change of FREQ/PHASE/AMP;
inverse of the minimum bit duration (e.g., a signal that has a .977 usec
minimum bit has a bit rate of 1024 kbit/sec).
- withBlanking(Blanking...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the Blanking
- withBlanking(Collection<Blanking>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the Blanking
- withBurstDuration(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the pulse burst duration.
- withBurstNumPulses(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the number of pulses in a single pulse burst.
- withBurstOffTime(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the pulse burst off time in microseconds (duration of time between the
end of one pulse burst to the start of the next pulse burst).
- withBurstRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the number of pulse bursts per second.
- withBw(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set the bandwidth measurement of the curve values.
- withCalculated(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
- withCalculated(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
- withCalculated(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
- withCalculated(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Set "Yes" if the power value(s) have been calculated, or "No" if they have
been measured.
- withCallSign(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the call sign assigned to the transmitting station.
- withCallSign(String) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the call sign assigned to the transmitting station.
- withCarrierSuppression(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the amount of reduction of the signals carrier, as compared to a non
attenuated signal carrier.
- withCarrierWaveform(String) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the waveform that will be used for the carrier of the jamming signal.
- withCaseNum(CaseNum...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the CaseNum
- withCaseNum(Collection<CaseNum>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the CaseNum
- withCaseNum(CaseNum...) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the CaseNum
- withCaseNum(Collection<CaseNum>) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the CaseNum
- withCenterFreq(Double) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the middle frequency in the band.
- withChangeDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.NarrowBandPlanning
-
Set the date this record is expected to be updated to comply with narrow
band transition plans.
- withChangeDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.NarrowBandPlanning
-
Set the date this record is expected to be updated to comply with narrow
band transition plans.
- withChannel(Channel...) - Method in class us.gov.dod.standard.ssrf._3_1.ChannelPlan
-
Set the serial of the referenced ChannelPlan.
- withChannel(Collection<Channel>) - Method in class us.gov.dod.standard.ssrf._3_1.ChannelPlan
-
Set the serial of the referenced ChannelPlan.
- withChannelDwell(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the time the transmitter is on.
- withChannelFreq(ChannelFreq...) - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Set one frequency in the channel plan.
- withChannelFreq(Collection<ChannelFreq>) - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Set one frequency in the channel plan.
- withChannelPlan(ChannelPlan...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withChannelPlan(Collection<ChannelPlan>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withChannelPlan(ChannelPlan...) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set the ChannelPlanRef
- withChannelPlan(Collection<ChannelPlan>) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set the ChannelPlanRef
- withChannelPlan(ChannelPlan...) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the ChannelPlanRef
- withChannelPlan(Collection<ChannelPlan>) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the ChannelPlanRef
- withChannelPlanRef(Serial...) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
- withChannelPlanRef(Collection<Serial>) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
- withChannelPlanRef(Serial...) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
- withChannelPlanRef(Collection<Serial>) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
- withChannelSpacing(Double) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the frequency increment between discrete channels.
- withChannelSpacing(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set In Data Item ChannelSpacing (US)- enter the amount of bandwidth
allotted to each channel, measured as the spacing between center
frequencies (or wavelengths) of adjacent channels.
- withCharacteristics(ListUCH) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the interference characteristics.
- withChipRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the maximum generator rate used to encode/decode a Direct Sequence
spread spectrum signal.
- withChipRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the chip rate.
- withCircuitRemarks(CircuitRemarks...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:CircuitRemarks
- withCircuitRemarks(Collection<CircuitRemarks>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:CircuitRemarks
- withCityArea(String) - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Set the city of the address or an operational area name.
- withCityArea(String) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the city of the address or an operational area name.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.common.Remarks
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set the classification of the current data item.
- withCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set the classification of the current data item.
- withClsAuthority(String) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the identity, by name and position, or by personal identifier, of the
original classification authority.
- withClsDerived(ClsDerived...) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the US:ClsDerived
- withClsDerived(Collection<ClsDerived>) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the US:ClsDerived
- withClsOrg(String) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the organization of the original classification authority.
- withClsReason(String) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the reason(s) for the classification.
- withCmdLevel(ListCLC) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the organisational level of the force element according to stratum,
echelon or point at which authority or control is maintained.
- withCOCOMGroup(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set PACOM to identify a grouping of frequencies having a like or similar
use.
- withCode(Code...) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Set the three-letter code of an existing Code List to be modified, or an
unused three-letter code in the case of the creation of a new Code List.
- withCode(Collection<Code>) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Set the three-letter code of an existing Code List to be modified, or an
unused three-letter code in the case of the creation of a new Code List.
- withCode(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Set an alphanumeric combination that is used to identify a particular
Notation/Signal.
- withCode(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Set an alphanumeric combination that is used to identify a particular
Notation/Signal.
- withCodeList(CodeList...) - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Set the CodeList
- withCodeList(Collection<CodeList>) - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Set the CodeList
- withCodeListCode(String) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Set the three-letter code of an existing Code List to be modified, or an
unused three-letter code in the case of the creation of a new Code List.
- withCodePeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Set the length of time of the pseudorandom code repetition period.
- withCodePeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the length of time of the pseudorandom code repetition period.
- withCodeRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Set the pseudorandom code rate.
- withCodeRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the post encryption number of symbols per bit for a digital data
stream.
- withCodeRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the pseudorandom code rate.
- withColourNum(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set a Colour Number associated to the assigned frequency.
- withColourWord(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the Colour Word associated to the assigned frequency.
- withComment(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Set amplifying information to describe the Status of the Assignment.
- withComment(Comment...) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Set the Comment
- withComment(Collection<Comment>) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Set the Comment
- withComments(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.RecordNote
-
Set the Amplifying conditional comments for the note as agreed to by the
Interdepartment Radio Advisory Committee (IRAC) Frequency Assignment
Subcommittee (FAS).
- withCommentSource(CommentSource...) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the CommentSource
- withCommentSource(Collection<CommentSource>) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the CommentSource
- withCompMethod(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the method employed to reduce the period of the pulse.
- withCompRatio(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the ratio of the uncompressed pulse width to the compressed pulse width
measured at the 50% amplitude (-3 dB) points.
- withConductedEmissions(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the power level of undesired signals generated in the receiver and
conducted by way of the connection to the receiver.
- withConfigApprovedBy(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set
- withConfigApprovedDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set
- withConfigApprovedDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set
- withConfigEmission(ConfigEmission...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the US:ConfigEmission
- withConfigEmission(Collection<ConfigEmission>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the US:ConfigEmission
- withConfigFreq(ConfigFreq...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the ConfigFreq
- withConfigFreq(Collection<ConfigFreq>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the ConfigFreq
- withConfigFreqUse(ListUFU) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set
- withConfigID(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set a short name for the configuration; this name should be a meaningful
identification of the configuration, but it can also be automatically
generated in some systems.
- withConfigID(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the unique identifier of one the configurations used by this Assignment
at this specific Station.
- withConfigID(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramLine
-
Set a reference to a Configuration associated with this line on the
diagram.
- withConfiguration(Configuration...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the Configuration
- withConfiguration(Collection<Configuration>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the Configuration
- withConfiguration(Configuration...) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the Configuration
- withConfiguration(Collection<Configuration>) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the Configuration
- withConfiguration(Configuration...) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the Configuration
- withConfiguration(Collection<Configuration>) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the Configuration
- withConfiguration(Configuration...) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the Configuration
- withConfiguration(Collection<Configuration>) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the Configuration
- withConnectorType(ListCCN) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Set the type of connector used to attach the antenna to the equipment or
the antenna to the transmission media that attaches the equipment to the
antenna.
- withContact(Contact...) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the ContactRef
- withContact(Collection<Contact>) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the ContactRef
- withContact(Contact...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withContact(Collection<Contact>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withContactRef(Serial...) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
- withContactRef(Collection<Serial>) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
- withContinuous(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set In Data Item Continuous (US), indicate whether pulse-to-pulse ERP
variations are Discrete or Continuous.
- withContinuousUpdate(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Set if effectiveness data should be provided continually or just once.
- withControlRequestNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the control or request identifier that allows subordinate organizations
to track specific frequency applications.
- withCoordinationComments(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the Comments related to the external coordination of a frequency
assignment.
- withCoordinationData(CoordinationData...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:CoordinationData
- withCoordinationData(Collection<CoordinationData>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:CoordinationData
- withCoordinationNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the US Military Communications-Electronics Board (MCEB) identifier
assigned to the equipment or system.
- withCoordinationNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the US Military Communications-Electronics Board (MCEB) identifier
assigned to the equipment or system.
- withCoordinationNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the US Military Communications-Electronics Board (MCEB) identifier
assigned to the equipment or system.
- withCoordIndicator(ListUCJ) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CoordinationData
-
Set the coordinating entity.
- withCositeSep(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the minimum required frequency separation between the equipment for
which the assignment is being made and any other equipment operating at the
same location.
- withCositeSepDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set a free text description of the minimum required frequency separation
between a number of transmitters, or between a transmitter and a related
receiver in radio relay frequency requests.
- withCountry(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Manufacturer
-
Set the country or area in which the Manufacturer has its Headquarters.
- withCountry(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.common.CaseNum
-
Set the nation or body who provided or assigned the case number.
- withCountry(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Set the country or area code.
- withCountry(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the country or area code.
- withCountry(ListCCY) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Set the Serial number Country part (REQUIRED).
- withCountry(ListCCY) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Set the Serial number Country part (REQUIRED).
- withCountry(ListCCY) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the country to which the Role belongs.
- withCountry(Country...) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the Country
- withCountry(Collection<Country>) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the Country
- withCountryName(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.UsingCountries
-
Set the designator for a specific country associated with the emitter that
transmits the subject Notation/Signal.
- withCouplingLoss(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
Set the loss that occurs when energy is transferred between the
transmitter/receiver and the antenna.
- withCouplingLoss(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxAntModeRef
-
- withCurrentStage(ListCSG) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the current stage of the system.
- withCurve(Curve...) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the Curve
- withCurve(Collection<Curve>) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the Curve
- withCurve(Curve...) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the Curve
- withCurve(Collection<Curve>) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the Curve
- withCurvePoint(CurvePoint...) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set the CurvePoint
- withCurvePoint(Collection<CurvePoint>) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set the CurvePoint
- withCurves(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the list of indices referring to Curves applicable to the data item.
- withCurves(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the list of indices referring to Curves applicable to the data item.
- withCurves(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the list of indices referring to Curves applicable to the data item.
- withCurves(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the list of indices referring to Curves applicable to the data item.
- withCutAngle(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Set the angle of the pattern cut.
- withCutType(ListCTP) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Set the type of the pattern cut.
- withData(Common<?>...) - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Set
- withData(Collection<Common<?>>) - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Set
- withDataset(Dataset...) - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Set the Dataset
- withDataset(Collection<Dataset>) - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Set the Dataset
- withDatasetRef(Serial...) - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
- withDatasetRef(Collection<Serial>) - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
- withDataSource(ListUDA) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the source or organization from which the data record was received.
- withDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Set the previous frequency assignment Government Master File (GMF)
authorization date.
- withDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Set the previous frequency assignment Government Master File (GMF)
authorization date.
- withDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Set the date of the source document.
- withDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Set the date of the source document.
- withDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Set the date of the permitted downgrading.
- withDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Set the date of the permitted downgrading.
- withDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the publication date of the external reference
- withDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the publication date of the external reference
- withDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Set the date the comment was provided.
- withDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Set the date the comment was provided.
- withDateApprovalRequired(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the date by which the approval of the application is desired
- withDateApprovalRequired(Date) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the date by which the approval of the application is desired
- withDateReceivedByCountry(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the date the request was received by the Host Nation Administration.
- withDateReceivedByCountry(Date) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the date the request was received by the Host Nation Administration.
- withDateResponseRequired(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the date by which the frequency assignment or Spectrum Supportability
Reply is required by the user in order to complete necessary advanced
operation coordination.
- withDateResponseRequired(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the date by which the frequency assignment or Spectrum Supportability
Reply is required by the user in order to complete necessary advanced
operation coordination.
- withDateResponseRequired(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date by which the Assignment or SSReply is required by the
requestor.
- withDateResponseRequired(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date by which the Assignment or SSReply is required by the
requestor.
- withDateResponseRequired(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the date by which the frequency assignment or Spectrum Supportability
Reply is required by the user in order to complete necessary advanced
operation coordination.
- withDateResponseRequired(Date) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the date by which the frequency assignment or Spectrum Supportability
Reply is required by the user in order to complete necessary advanced
operation coordination.
- withDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Set the date and UTC time of this status log entry.
- withDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Set the date and UTC time of this status log entry.
- withDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Set the date and time that the force element is at the selected waypoint.
- withDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Set the date and time that the force element is at the selected waypoint.
- withDaysOfMonth(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the day of month [1-31] when the Assignment will be guarded (monitored)
or used for transmission.
- withDaysOfMonth(String) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the day of month [1-31] that the Force element is planned for
deployment.
- withDaysOfMonth(String) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the day of month [1-31].
- withDaysOfMonth(String) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the day of month [1-31].
- withDaysOfWeek(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the weekday [0-7 where 0 and 7 are for Sunday, 1 for Monday, etc] when
the Assignment will be guarded (monitored) or used for transmission.
- withDaysOfWeek(String) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the weekday [0-7 where 0 and 7 are for Sunday, 1 for Monday, etc] that
the Force element is planned for deployment.
- withDaysOfWeek(String) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the weekday [0-7 where 0 and 7 are for Sunday, 1 for Monday, etc].
- withDaysOfWeek(String) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the weekday [0-7 where 0 and 7 are for Sunday, 1 for Monday, etc].
- withDCSTrunk(DCSTrunk...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set the US:DCSTrunk
- withDCSTrunk(Collection<DCSTrunk>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set the US:DCSTrunk
- withDeclsDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the declassification date for DEDATE and DE25Xn-based declassification
instructions.
- withDeclsDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the declassification date for DEDATE and DE25Xn-based declassification
instructions.
- withDeclsEvent(String) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the declassification event, when necessary based on the
declassification instructions.
- withDeclsType(String) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the declassification instructions of the dataset.
- withDeployment(Deployment...) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the Deployment
- withDeployment(Collection<Deployment>) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the Deployment
- withDeployment(Deployment...) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the Deployment
- withDeployment(Collection<Deployment>) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the Deployment
- withDeployment(Deployment...) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the Deployment
- withDeployment(Collection<Deployment>) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the Deployment
- withDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Code
-
Set In Data Item Description, the long text name of the code entry or a
brief description of the entry to be created or modified.
- withDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Set the description of the intended contents of new code list, and the
element(s) where it will be used.
- withDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
Set free text Contact information for legacy applications.
- withDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Project
-
Set any additional amplifying information about the project.
- withDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set a description of the operational mode; this description should be a
meaningful explanation of the mode main characteristics.
- withDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
Set the name of an individual or organization related to the frequency
assignment.
- withDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set a description of the operational configuration.
- withDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a general description of the Dataset that is inheriting Common.
- withDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Set the title for the address; for an Organisation, it can be the name of
the specific Branch or office; for a Contact or a Role, it can be the job
title associated to the address.
- withDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set a description of the timing deconfliction protocol.
- withDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set a description of the operational mode; this description should be a
meaningful explanation of the mode main characteristics.
- withDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set a human-readable description of a diagram endpoint.
- withDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set a description of the operational mode; this description should be a
meaningful explanation of the mode main characteristics.
- withDesiredEffect(ListUWA) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Set the expected impact a jamming mission will have on a specific target
area.
- withDesiredPerformance(ListUWB) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPerformance
-
Set the desired effectiveness of the service request.
- withDetailedFunction(DetailedFunction...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set
- withDetailedFunction(Collection<DetailedFunction>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set
- withDiagramEndpoint(DiagramEndpoint...) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the DiagramEndpoint
- withDiagramEndpoint(Collection<DiagramEndpoint>) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the DiagramEndpoint
- withDiagramLine(DiagramLine...) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the DiagramLine
- withDiagramLine(Collection<DiagramLine>) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the DiagramLine
- withDiameter(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the cross-section of an antenna radiation pattern in the direction of
highest gain.
- withDigitalModType(ListCMO) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Set the type of digital modulation.
- withDigitalModType(ListCMO) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the type of digital modulation.
- withDir(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPatternPoint
-
Set the direction in degrees in reference to the pointing angle of the
antenna set to zero.
- withDirection(ListULD) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the sweep direction from the center frequency.
- withDispatcher(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set if a Dispatcher accesses base stations or repeaters in the trunked land
mobile system.
- withDispatcherExplanation(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set how the dispatcher accesses the base station or repeater.
- withDistributionGroups(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set In Data Item DistributionGroups (US), identify to whom the signed
certification should be distributed (e.g., "J-12 Holders").
- withDocketNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PreviousAuthorization
-
Set the previous frequency assignment Government Master File (GMF)
authorization docket number.
- withDocketNum(DocketNum...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:DocketNum
- withDocketNum(Collection<DocketNum>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:DocketNum
- withDocumentCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the classification level of the Reference.
- withDowncls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Set the classification level of the dataset after downgrading.
- withDowngrade(Downgrade...) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the US:Downgrade
- withDowngrade(Collection<Downgrade>) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the US:Downgrade
- withDowngradeInfo(String) - Method in class us.gov.dod.standard.ssrf._3_1.common.Downgrade
-
Set additional downgrading information, if any.
- withDuplexSep(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the minimum or exact duplex frequency separation
- withDuplexSep(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the minimum or exact duplex frequency separation
- withDuplexSepType(ListCDS) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set if the frequency separation must be exactly, or at the minimum, the
amount specified.
- withDuplexSepType(ListCDS) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set if the frequency separation must be exactly, or at the minimum, the
amount specified.
- withDuration(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the number of minutes for which an event will live.
- withDuration(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the number of minutes for which an event will live.
- withDuration(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the number of minutes for which an event will live.
- withDuration(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the number of minutes for which an event will live.
- withDuration(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set the amount of time the frequency is being monitored or jammed.
- withDuration(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Set the period of dwell for the baseband audio frequency, before it is
disabled or switched.
- withDutyCycleMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set as a percentage, the maximum ratio of the pulse duration to the pulse
period.
- withDutyCycleMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set as a percentage, the minimum or nominal ratio of the pulse duration to
the pulse period.
- withDwell(Double) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the frequency range dwell time; how long a sweep pauses on a particular
frequency before moving to next technique.
- withDwellTime(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the dwell time at any RF when the RF dwells at particular values for
more than one pulse in a row.
- withEarthCoverage(ListCCO) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the area of earth coverage.
- withEarthStation(EarthStation...) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the EarthStation
- withEarthStation(Collection<EarthStation>) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the EarthStation
- withEffectiveDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Set the date this note comes in force.
- withEffectiveDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Set the date this note comes in force.
- withEffectiveDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the date by which the dataset is to be operational or effective.
- withEffectiveDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date and UTC time when the Assignment will be operational.
- withEffectiveDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date and UTC time when the Assignment will be operational.
- withEffectiveDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the width of the range (or band) of restricted frequency(s).
- withEffectiveDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the width of the range (or band) of restricted frequency(s).
- withEfficiency(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntEfficiency
-
Set the efficiency of the antenna within the frequency range which is being
reported.
- withEIRPMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the maximum effective isotropic radiated power (EIRP) radiated from the
transmitter antenna.
- withEIRPMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the maximum effective isotropic radiated power (EIRP) radiated from the
transmitter antenna.
- withEIRPMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the minimum or nominal effective isotropic radiated power (EIRP)
radiated from the transmitter antenna.
- withEIRPMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the minimum or nominal effective isotropic radiated power (EIRP)
radiated from the transmitter antenna.
- withElevScanChangeRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set In Data Item Vertical Scan Change Rate (US), enter the rate of change
for vertical Scan Period variations expressed in Scan Period change per
unit of time
- withElevScanRateExtremeMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set In Data Item Extreme Vertical Scan Rate Max (US), enter the range of
vertical scan rate values that represent 100% of the signal observed Scan
values obtained from a statistical study of a data set.
- withElevScanRateExtremeMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set In Data Item Extreme Vertical Scan Rate Min (US), enter the range of
vertical scan rate values that represent 100% of the signal observed Scan
values obtained from a statistical study of a data set.
- withElevScanRateMean(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the average vertical scan rate value for a signal that changes vertical
scan rates on a non-patterned basis.
- withElevScanRateMedian(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the vertical scan rate that the signal most often used, based on a
statistical study of a data set.
- withElevScanSector(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the total angular width in the vertical plane (aka, elevation) the
subject emitter antenna mainbeam (aka, mainlobe) scans/covers in one
complete scan.
- withElevScanSectorMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the total angular width in the vertical plane (aka, elevation) the
subject emitter antenna mainbeam (aka, mainlobe) is capable of scanning.
- withElevScanVelocity(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the vertical angular speed (i.e., degrees per second) of the subject
emitter Mainbeam (aka., mainlobe) scan referenced to a fixed point.
- withElevStart(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Set the start elevation angle for the blanked sector.
- withElevStop(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Blanking
-
Set the stop elevation angle for the blanked sector.
- withEllipse(Ellipse...) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the Ellipse
- withEllipse(Collection<Ellipse>) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the Ellipse
- withEMail(EMail...) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the Email
- withEMail(Collection<EMail>) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the Email
- withEMail(EMail...) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the Email
- withEMail(Collection<EMail>) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the Email
- withEMail(EMail...) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the Email
- withEMail(Collection<EMail>) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the Email
- withEmergency(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set "Yes" if the system may be used in a case of emergency.
- withEmergency(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set "Yes" if the system may be used in a case of emergency.
- withEmergency(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set "Yes" if the system may be used in a case of emergency.
- withEmission(Emission...) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the Emission
- withEmission(Collection<Emission>) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the Emission
- withEmsClass(String) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Emission
-
Set a three to five characters code, derived from the table below,
representing the emission classification.
- withEmsClass(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigEmission
-
Set a three to five characters code, derived from the table below,
representing the emission classification.
- withEmsClass(EmsClass...) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the EmsClass
- withEmsClass(Collection<EmsClass>) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the EmsClass
- withEmsClass(EmsClass...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the EmsClass
- withEmsClass(Collection<EmsClass>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the EmsClass
- withEndpointID(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set an identifier for each icon on the diagram.
- withEndpointLocation(EndpointLocation...) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set the EndpointLocation
- withEndpointLocation(Collection<EndpointLocation>) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set the EndpointLocation
- withEntryBy(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- withEntryByRole(Role) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the serial of the Role which is creating the current dataset.
- withEntryDateTime(DT) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the date and UTC Time the dataset was initially entered into the data
repository (e.g., FRRS for USA, SMIR for NATO).
- withEqpFnct(ListCEF) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
Set the equipment function.
- withERPActualMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the highest discrete ERP value which is found in a single piece of a
complete data (e.g., in a single intercept that contains the complete ERP
characteristics of the signal).
- withERPActualMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the lowest discrete ERP value which is found in a single piece of a
complete data (e.g., in a single intercept that contains the complete ERP
characteristics of the signal).
- withERPAdaptiveDriverDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the condition which controls, or can be associated with, the signal ERP
variations.
- withERPAdaptiveRuleDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the rule which describes the signal ERP variations.
- withERPChangeRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the rate of change for ERP variations expressed in ERP change per unit
of time.
- withERPDwell(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPValues
-
Set the time duration for a complete dwell/group of pulses which all have
the same discrete ERP value, or for a continuous wave at a constant ERP
value.
- withERPExtremeMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the upper ERP value that represent 100% of the signal observed ERP
values which were obtained from a statistical study of a data set.
- withERPExtremeMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the lower ERP value that represent 100% of the signal observed ERP
values which were obtained from a statistical study of a data set.
- withERPMean(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the mean ERP value for a signal which changes ERP values on a
non-patterned basis.
- withERPMedian(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the observed ERP value, or the observed ERP values in the case of a
signal with multiple discrete/individual ERP values, that the signal most
often used based on a statistical study of a dataset.
- withERPNumber(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the Emergency Readiness Plan (ERP) Number.
- withERPPatternPeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the time duration for one complete cycle of a repeating ERP sequence.
- withERPPatternType(ListUS7) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set In Data Item ERPPatternType (US), indicate whether ERP is unmodulated
ERP variations are Patterned, Non-Patterned, or Adaptive.
- withERPSequenceDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set In Data Item ERP SequenceDesc (US), enter the textual description of
the observed algorithm for the sequence of variation for the ERP.
- withERPStdDev(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the standard deviation associated with the ERP Value data set that was
used to calculate ERPMean.
- withERPStep(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the delta between the Most Probable observed ERP values of adjacent and
discrete ERPs.
- withERPValue(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPValues
-
Set the ERP values that represent 95% of the signal observed ERP values for
each discrete ERP value which were obtained from a statistical study of a
data set.
- withEstimatedExpansionCost(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the estimated cost of the expansion.
- withEvaluation(ListCJ1) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set your best guess as to the cause of the interference.
- withExBlankingOn(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set In Data Item ExBlankingOn (US), indicate if external blanking is
enabled.
- withExcluded(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set "Yes" to indicate that the shape is to be excluded from the set.
- withExcluded(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set "Yes" to indicate that the shape is to be excluded from the set.
- withExcluded(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Set "Yes" to indicate that the shape is to be excluded from the set.
- withExcluded(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.StageLocation
-
Set "Yes" to indicate that the shape is to be excluded from the set.
- withExcluded(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Set whether the referenced Location is included or excluded at this diagram
endpoint.
- withExclusive(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Set Yes if the assigned frequency should not be reused within the area of
exercise/operation.
- withExpansionTargetDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the date this expansion will be activated (i.e., the date the system
will require the additional radio frequencies).
- withExpansionTargetDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the date this expansion will be activated (i.e., the date the system
will require the additional radio frequencies).
- withExpirationDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the date at which the dataset will expire.
- withExpirationDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the date at which the dataset will expire.
- withExpirationDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the date at which the dataset will expire.
- withExpirationDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the date at which the dataset will expire.
- withExpirationDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the date at which the dataset will expire.
- withExpirationDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the date at which the dataset will expire.
- withExpirationDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Set the date this note goes out of force.
- withExpirationDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Set the date this note goes out of force.
- withExpirationDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the date at which the dataset will expire.
- withExpirationDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the date at which the dataset will expire.
- withExpirationDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the date at which the dataset will expire.
- withExpirationDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the date at which the dataset will expire.
- withExpirationDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the date at which the dataset will expire.
- withExpirationDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the date at which the dataset will expire.
- withExpirationDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set the date at which the dataset will expire.
- withExpirationDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set the date at which the dataset will expire.
- withExpirationDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the date at which the dataset will expire.
- withExpirationDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the date at which the dataset will expire.
- withExpirationDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date and UTC time that this Assignment will expire.
- withExpirationDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date and UTC time that this Assignment will expire.
- withExpirationDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set In Data Item ExpirationDateTime, In Data Item ExpirationDateTime, enter
the date at which the dataset will expire, formatted as yyyy-mmddThh:
mm:ssZ (year-month-day, "T" for time, hour:minute:seconds Zulu).
- withExpirationDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set In Data Item ExpirationDateTime, In Data Item ExpirationDateTime, enter
the date at which the dataset will expire, formatted as yyyy-mmddThh:
mm:ssZ (year-month-day, "T" for time, hour:minute:seconds Zulu).
- withExplainInformationTypeX(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a reference to a Remark that describes the Type of Information.
- withExplainModulationTypeX(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a reference to a Remark that describes the Type of Modulation.
- withExplainNatureOfSignalX(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a reference to a Remark that describes the Nature of Signal.
- withExternalReference(ExternalReference) - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
Set a value that is most probably correct.
- withExternalReference(ExternalReference...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withExternalReference(Collection<ExternalReference>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withExtReferenceRef(ExtReferenceRef...) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the ExtReferenceRef
- withExtReferenceRef(Collection<ExtReferenceRef>) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the ExtReferenceRef
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(ExtReferenceRef) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set a list of Common/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Set<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set a list of Common/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withExtReferences(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set a list of Conmmon/ExtReferenceRef idx values applicable to the current
data item.
- withFallTime(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time required for a pulse to fall from 90% to 10 percent of the
mean peak amplitude of its voltage waveform/envelope.
- withFallTime(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the pulse fall time from 90 to 10 percent of the pulse.
- withFASNumber(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the Interdepartment Radio Advisory Committee (IRAC) Frequency
Assignment Subcommittee (FAS) identifier assigned by NTIA.
- withFax(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Set "Yes" if the number is for a telefax.
- withFCCAcceptanceNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the Federal Communication Commission (FCC) ID of FCC authorised
equipment.
- withFCCAcceptanceNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the Federal Communication Commission (FCC) ID of FCC authorised
equipment.
- withFCCFileNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the file number assigned by the Federal Communications Commission
(FCC), issued to non-government stations operating on government
frequencies or government stations operating on nongovernment frequencies,
which is unique to each FCC license.
- withFEDeployment(FEDeployment...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withFEDeployment(Collection<FEDeployment>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withFeedlineLength(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the length of the antenna feed line.
- withFeedlineLoss(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the total loss of the antenna feed line.
- withFeedOrientation(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Set the orientation of the feed when looking in the direction of the
boresight.
- withFeedType(ListCAF) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Set the element used to "illuminate" the reflector for an antenna unit.
- withFERef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the dataset identifier of the ForceElement being deployed.
- withFFTType(String) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the form of the Fast Fourier Transform used (e.g., Integral, Serial,
Discrete).
- withFieldedStatus(ListCSG) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the current stage of the RFSystem.
- withFilter(String) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set a brief description of the type of the output filter.
- withFirstName(String) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the first name of the contact individual.
- withFMDeviationCode(ListCFM) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the code that indicates the type of Root Mean Square (RMS) deviation
(multichannel or per-channel).
- withFMPeakFreqDev(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the peak frequency deviation when analog modulation is employed.
- withFMPeakModulationIdx(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the peak modulation index (deviation ratio) when using analog frequency
or phase modulation.
- withFMRMSFreqDev(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the Root Means Square (RMS) frequency deviation when frequency
modulation (FM) is employed and the base band consists of
frequency-division multiplexed (FDM) channels or multiple subcarrier
signals.
- withFMSCNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the assignment serial number as registered in the Frequency Management
Subcommittee (FMSC) Master Radio Frequency List (MRFL).
- withFootnote(Footnote...) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the Footnote
- withFootnote(Collection<Footnote>) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the Footnote
- withFootnotes(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set a list containing each Footnote index that is applicable to the current
band Allocation.
- withFootnotes(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set a list containing each Footnote index that is applicable to the current
band Allocation.
- withFootnotes(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Set a list containing each Footnote index applicable to the current
frequency band.
- withFootnotes(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Set a list containing each Footnote index applicable to the current
frequency band.
- withFootnoteType(ListCTA) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Set the type or source of the Footnote.
- withForceElement(ForceElement) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the dataset identifier of the ForceElement being deployed.
- withForceElement(ForceElement...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withForceElement(Collection<ForceElement>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withFreq(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Set the frequency at which the gain is expressed.
- withFreq(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.VSWR
-
Set the specific frequency at which the VSWR measurement was taken.
- withFreq(Freq...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the Freq
- withFreq(Collection<Freq>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the Freq
- withFreq(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Set the paired frequency for the repeater, duplex link or frequency
diversity capability.
- withFreq(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Set the subcarrier frequency.
- withFreqBand(FreqBand...) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the FreqBand
- withFreqBand(Collection<FreqBand>) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set the FreqBand
- withFreqBlocking(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set if the frequency hopping system is capable of blocking certain
frequencies.
- withFreqConst(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set a frequency offset (positive or negative).
- withFreqConversion(FreqConversion...) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the FreqConversion
- withFreqConversion(Collection<FreqConversion>) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the FreqConversion
- withFreqFactor(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set a positive numeric multiplier of the carrier frequency.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Set the maximum value of the frequencies in the range.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntEfficiency
-
Set the maximum value of the frequencies in the range.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Set the maximum value of the frequencies in the range.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Set
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the maximum value of the frequencies in the range.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the target frequency range maximum value.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set the maximum value of the frequencies in the range.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the frequency range maximum value planned for denial of use.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the frequency range maximum value planned for denial of use.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set the highest value of the curve frequency range.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Set the maximum value of the frequencies in the range.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the maximum value of the frequencies in the range.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the upper frequency of band.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Set the upper frequency of band.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Set the maximum value of the frequencies in the range.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the upper end of the range of RF values that represent 100% of observed
signals.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Set the maximum value of the frequencies in the range.
- withFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Set the maximum value of the frequencies in the range.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Set the nominal frequency or minimum value of the frequency range.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntEfficiency
-
Set the nominal frequency or minimum value of the frequency range.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Set the nominal frequency or minimum value of the frequency range.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Set
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the nominal frequency or minimum value of the frequency range.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the target discrete frequency, or frequency range minimum value.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set the nominal frequency or minimum value of the frequency range.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the discrete frequency, or frequency range minimum value, planned for
denial of use.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the frequency range minimum value planned for denial of use.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set the lowest value of the curve frequency range.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Set the nominal frequency or minimum value of the frequency range.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the nominal frequency or minimum value of the frequency range.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the lower frequency of band or discrete frequency.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Set the lower frequency of band or discrete frequency.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Set the nominal frequency or minimum value of the frequency range.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the lower end of the range of RF values that represent 100% of observed
signals.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Set the nominal frequency or minimum value of the frequency range.
- withFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Set the nominal frequency or minimum value of the frequency range.
- withFreqOffset(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Set the frequency differential from the subcarrier frequency.
- withFreqOld(FreqOld...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the FreqOld
- withFreqOld(Collection<FreqOld>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the FreqOld
- withFreqRest(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Set the dwell or pause frequency utilised while processing the subcarrier.
- withFreqSep(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Set the required minimum or exact frequency separation.
- withFreqSepType(ListCDS) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Set if the stated frequency separation is an exact or minimum value.
- withFreqTolerance(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the drift in Hz or in ppm using the formula: Frequency tolerance (ppm)
= Maximum drift (Hz) / Center frequency (MHz).
- withFreqTolerance(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the drift in Hz or in ppm using the formula: Frequency tolerance (ppm)
= Maximum drift (Hz) / Center frequency (MHz).
- withFreqToleranceUnit(ListCFO) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the units in which the Frequency Tolerance is expressed.
- withFreqToleranceUnit(ListCFO) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the units in which the Frequency Tolerance is expressed.
- withFrequencyActionOfficer(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set a MILDEP code identifying the person or group responsible for the
frequency assignment.
- withFreqUse(ListCAU) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntFreqs
-
Set if the frequency range is used for transmit, receive, or both transmit
and receive.
- withFreqUse(ListCAU) - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Set
- withFreqUse(ListCAU) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the intended usage of the frequency.
- withFrontToBackRatio(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Set the front-to-back ratio of the main beam to the back lobe.
- withFunction(ListCFN) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set Data item Function is not used by US except when exchanging with NATO.
- withGain(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntGain
-
Set the antenna gain (in dBi - dB with reference to an isotropic source) in
the direction of maximum radiation.
- withGain(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPatternPoint
-
Set the amount of gain for the direction relative to the main beam gain.
- withGeneric(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model.
- withGeneric(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model.
- withGeneric(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model.
- withGeoAltitude(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the altitude of the geostationary satellite, relative to Mean Sea Level
(MSL).
- withGeoDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set a textual description of the geographic locations where this equipment
will be used during this stage.
- withGeoNominalLon(String) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the longitude of the geostationary satellite in the following format:
dddmmss[.hh]H, where H represents "E" for East or "W" for West.
- withGeoNominalLon(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the longitude of the geostationary satellite in decimal degrees.
- withGPSAffected(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set whether the interference affects GPS reception.
- withGpsNBL1Level(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the narrowband levels emitted by this system in the Navstar Global
Positioning System (GPS) 1164-1240 MHz band.
- withGpsNBL2Level(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the narrowband levels emitted by this system in the Navstar Global
Positioning System (GPS) 1559-1610 MHz band.
- withGpsWBL1Level(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the wideband levels emitted by this system in the Navstar Global
Positioning System (GPS) 1164-1240 MHz band.
- withGpsWBL2Level(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the wideband levels emitted by this system in the Navstar Global
Positioning System (GPS) 1559-1610 MHz band.
- withGuardBand(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the RF band between carriers which is not used.
- withHelpRequired(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set whether the user needs technical assistance from another organisation
to solve the interference.
- withHopDwell(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the length of time the frequency hopping system dwells on a frequency.
- withHopRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the rate at which the frequency hopping system hops from one frequency
to another frequency.
- withHorzAperture(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the horizontal cross-section of the antenna radiation pattern in the
direction of highest gain.
- withHorzBwMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the maximum horizontal beamwidth for beamwidths which vary with the
frequency.
- withHorzBwMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the maximum angle of the horizontal component of the antenna mainbeam
measured at the half-power (-3 dB) point of its maximum horizontal width.
- withHorzBwMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the minimum or nominal horizontal beamwidth.
- withHorzBwMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the minimum angle of the horizontal component of the antenna mainbeam
measured at the half-power (-3 dB) point of its maximum horizontal width.
- withHorzDimension(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the linear horizontal dimension of the antenna.
- withHorzScanRate(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the number of complete scans the antenna is capable of making each
minute.
- withHorzScanSector(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the maximum horizontal sector the antenna can scan (enter 360 for a
full rotation).
- withHorzScanSpeed(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the number of degrees per second the antenna is capable of scanning.
- withHorzScanType(ListCAS) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the antenna horizontal scanning capability.
- withHorzSidelobeAttenuation(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the amount of suppression relative to the main beam gain of the
antenna.
- withHorzSidelobeAz(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the direction of the sidelobe in reference to the direction of maximum
gain.
- withHorzSidelobeSuppressed(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set if the sidelobe has been suppressed.
- withHostComments(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CoordinationData
-
Set the Comments from the coordinating entity.
- withHostDocketNum(HostDocketNum...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:HostDocketNum
- withHostDocketNum(Collection<HostDocketNum>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:HostDocketNum
- withHostNation(HostNation...) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the HostNation
- withHostNation(Collection<HostNation>) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the HostNation
- withHours(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the hours of day [0-23] (UTC time) when the Assignment will be guarded
(monitored) or used for transmission.
- withHours(String) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the hours of a day [0-23] (UTC time) that the Force element is planned
for deployment.
- withHours(String) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the hours of a day [0-23] (UTC time).
- withHours(String) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the hours of a day [0-23] (UTC time).
- withIconPosLeft(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set the X coordinate of the icon in twips.
- withIconPosTop(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set the Y coordinate of the icon in twips." to read, "In Data Item
IconPosTop, enter the Y coordinate of the icon in twips.
- withIconType(ListCIC) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set the type of icon for the diagram endpoint.
- withIdentifier(String) - Method in class us.gov.dod.standard.ssrf._3_1.common.CaseNum
-
Set the case number.
- withIdentifier(String) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set any alternate identifier for the document as needed.
- withIdentifier(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Set an identifier for this Footnote (e.g., US2, 5.441).
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set a unique identifier for each Data Item in the Dataset.
- withIdref(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set a unique identifier for each Data Item in the Dataset.
- withIdx(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
Set a unique index for each External Reference used by this Dataset.
- withIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.common.Remarks
-
Set a unique index for each Remark used by this Dataset.
- withIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set a unique integer index for the current ellipse within the geometric
shape.
- withIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set the sequential index of a Point within the referenced Location.
- withIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Set a unique integer index for the current ellipse within the Location.
- withIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set
- withIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set a unique index for each Curve used by this Dataset.
- withIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set a unique index for each Comment used by this Dataset.
- withIdx(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Set a unique index for each Footnote used by this Dataset.
- withIFMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Set the maximum value of the intermediate frequencies.
- withIFMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Set the nominal intermediate frequency or minimum value of the intermediate
frequency range.
- withImageRejection(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the ratio of the image frequency signal level required to produce a
specified output, to the desired signal level required to produce the same
output.
- withInBand(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set "Yes" if this frequency range is in compliance with the applicable
Frequency Allocation Table.
- withInfoDataRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the information data rate.
- withInfoTransferRequirement(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the required character rates, data rates, and circuit
quality/reliability of the system.
- withInitialCost(String) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the estimated initial cost, in US dollars, of the system/equipment.
- withInitialCost(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the estimated initial cost, in US dollars, of the system/equipment.
- withInitialCostDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the explanation of how the estimated initial cost for the system was
calculated.
- withInstallation(Installation...) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Set the Installation
- withInstallation(Collection<Installation>) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Set the Installation
- withInstantRFBW03(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the transmitter pulse bandwidth (burst or instantaneous) measured at
the 3 dB points (min)
- withInstantRFBW06(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the transmitter pulse bandwidth (burst or instantaneous) measured at
the 6 dB points (min)
- withInstantRFBW10(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the transmitter pulse bandwidth (burst or instantaneous) measured at
the 10 dB points (min)
- withInstantRFBW20(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the transmitter pulse bandwidth (burst or instantaneous) measured at
the 20 dB points (min)
- withIntermediateFunction(ListUFN) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set
- withIntermodEffect(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set
- withIntermodEffect(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set
- withIntermodPct(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set
- withIntermodPct(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set
- withIntermodRejection(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the rejection of spurious emissions involving the mixing of two or more
signals.
- withInternationalDesignator(String) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the externally-assigned International Designator for the satellite.
- withIntfDescr(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set In Data Item IntfDescr, describe the interference.
- withIntfPeriod(ListCTI) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set how often the interference is experienced.
- withIntfReport(IntfReport...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withIntfReport(Collection<IntfReport>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withIntfStartDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the date/time the interference was first perceived.
- withIntfStartDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the date/time the interference was first perceived.
- withIntfStopDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the date/time the interference ceased.
- withIntfStopDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the date/time the interference ceased.
- withIRACNumber(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the Interdepartment Radio Advisory Committee (IRAC) document number of
the NTIA Certification of Spectrum Support document.
- withIsAttached(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set if the document, file or other "external" information is stored in
attachment to this message.
- withIsClassified(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set if the referenced information contains any classified data.
- withIsRelinquished(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Set the Yes if this is an existing assignment to be relinquished by the
trunked land mobile system.
- withITURegComments(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set amplifying comments related to registering an assignment with the
International Telecommunication Union (ITU) Radiocommunication Bureau (BR).
- withITURegDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the date the frequency assignment was registered with the International
Telecommunication Union (ITU) Radiocommunication Bureau (BR).
- withITURegDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the date the frequency assignment was registered with the International
Telecommunication Union (ITU) Radiocommunication Bureau (BR).
- withITURegNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the registration number assigned by the International Telecommunication
Union (ITU) Radiocommunication Bureau (BR).
- withITURegStatus(ListCIR) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the status of the Assignment ITU-R registration.
- withITUWaiver(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set if this is a satellite system that is exempt from submitting
notification to the Radiocommunication Bureau.
- withJ12Number(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Set the US Military Communications-Electronics Board (MCEB) identifier of a
superseded or related application.
- withJammingAuthority(JammingAuthority...) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the US:JammingAuthority
- withJammingAuthority(Collection<JammingAuthority>) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the US:JammingAuthority
- withJammingChannelProfile(JammingChannelProfile...) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the US:JammingChannelProfile
- withJammingChannelProfile(Collection<JammingChannelProfile>) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the US:JammingChannelProfile
- withJammingPerformance(JammingPerformance...) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the US:JammingPerformance
- withJammingPerformance(Collection<JammingPerformance>) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the US:JammingPerformance
- withJammingPlan(JammingPlan...) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the US:JammingPlan
- withJammingPlan(Collection<JammingPlan>) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the US:JammingPlan
- withJammingTarget(JammingTarget...) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the US:JammingTarget
- withJammingTarget(Collection<JammingTarget>) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the US:JammingTarget
- withJCACallSign(String) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Set In Data Item JCACallSign (US), enter the unique net identifier for the
JCA.
- withJCAFreq(Double) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Set In Data Item JCAFreq (US), enter the frequency assigned to the JCA.
- withJCALevel(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Set In Data Item JCALevel (US), enter the required level of authorisation
for the jamming plan.
- withJCALevel(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the level of joint control authorization (JCA) required for the jamming
plan.
- withJCAState(ListUWC) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingAuthority
-
Set an indication of the authorization condition for radiation of a jamming
plan.
- withJitterCapable(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set In Data Item JitterCapable (US), indicate whether the mode of the pulse
stream is jitter capable.
- withJobTitle(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Set the title or position of the comment author.
- withJRFL(JRFL...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withJRFL(Collection<JRFL>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withJRFLEntry(JRFLEntry...) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the JRFLEntry
- withJRFLEntry(Collection<JRFLEntry>) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the JRFLEntry
- withJRFLEntryLocation(JRFLEntryLocation...) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the JRFLEntryLocation
- withJRFLEntryLocation(Collection<JRFLEntryLocation>) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the JRFLEntryLocation
- withJustification(String) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set a description of the justification of why the JRFL entry is required,
to support the spectrum manager.
- withJustifyShortRiseTime(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set an operational justification for short pulse rise time.
- withKeyLoadProcedure(String) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the sequence pattern for initializing the jamming equipment.
- withKeysAngle(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the keying angle for the digital/analog/hybrid data stream.
- withKeysDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set a text description of the keying format for the digital/analog/hybrid
data stream.
- withLastChangeBy(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- withLastChangeByRole(Role) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the serial of the Role which last modified the current dataset.
- withLastChangeDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the date and UTC Time the dataset was last modified.
- withLastChangeDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the date and UTC Time the dataset was last modified.
- withLastName(String) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the last name of the contact individual.
- withLastObservedBy(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the identifier of the person or entity who last observed this signal
configuration.
- withLastObservedBy(String) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the identifier of the person or entity who last observed this Dataset.
- withLastReviewBy(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- withLastReviewByRole(Role) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the Role reference serial of the person who last reviewed the dataset.
- withLastReviewDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the last date that the dataset was reviewed.
- withLastReviewDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the last date that the dataset was reviewed.
- withLastReviewedBy(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the identifier of the person who last reviewed this configuration.
- withLastReviewedDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the date and time, based on Greenwich Mean Time (GMT), the
configuration was thoroughly reviewed.
- withLastReviewedDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the date and time, based on Greenwich Mean Time (GMT), the
configuration was thoroughly reviewed.
- withLat(String) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the geographical latitude (degrees, minutes, seconds and hemisphere N
or S) of the Point or center of the Ellipse.
- withLat(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the geographical latitude in decimal degrees.
- withLat(String) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set the geographical latitude (degrees, minutes, seconds and hemisphere N
or S) of the Point or center of the Ellipse.
- withLat(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set the geographical latitude in decimal degrees.
- withLat(String) - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Set the geographical latitude (degrees, minutes, seconds and hemisphere N
or S) of the Point or center of the Ellipse.
- withLat(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Set the geographical latitude in decimal degrees.
- withLat(String) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the geographic latitude of the target location, including hemisphere
(H).
- withLat(Double) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the geographic latitude of the target location in decimal degrees.
- withLaunchDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the date of the satellite launch.
- withLaunchDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the date of the satellite launch.
- withLaunchLoc(Location) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set a reference to a Location that identifies the satellite launch
location.
- withLaunchLocRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
- withLaunchStatus(ListCLS) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the status of the satellite.
- withLeadType(ListCAL) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntHardware
-
Set the type of device used for conducting or guiding the radio-frequency
energy from the transmitter or receiver to the antenna (e.g., continuous
waveguide).
- withLegacyNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Set a legacy reference number associated with the assigned frequency.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set one or more special handling instructions in sentence format, not code
format.
- withLegacyReleasability(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set one or more special handling instructions in sentence format, not code
format.
- withLevel(ListCNU) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Set the level of nomenclature (primary, nickname, etc).
- withLevel(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.CurvePoint
-
Set a dB value (refer to data element Curve for use instructions).
- withLevel3Auth(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set In Data Item Level3Auth (US), indicate if a request should go directly
to third-level authorization.
- withLineCoding(ListCDF) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Set the format used to represent binary digit sequencing when digital
modulation is used.
- withLineCoding(ListCDF) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the format used to represent binary digit sequencing when digital
modulation is used.
- withLink(Link...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the Link
- withLink(Collection<Link>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the Link
- withLinkID(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set a unique identifier for the link.
- withLinkName(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set a human readable name of the link.
- withListSerialNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the agency list serial number of a Government Master File (GMF) record
representing a group or area assignment.
- withLoadset(Loadset...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the LoadsetRef
- withLoadset(Collection<Loadset>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the LoadsetRef
- withLoadset(Loadset) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set In Data Item LoadsetRef (US), the serial of a Loadset dataset that
contains the details to be used for this jamming instance.
- withLoadset(Loadset...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withLoadset(Collection<Loadset>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withLoadsetRef(Serial...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
- withLoadsetRef(Collection<Serial>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
- withLoadsetRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
- withLobeID(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Set a unique (within the AntMode) identifier for the Antenna lobe.
- withLobeName(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Set a name for the Antenna lobe.
- withLobeSymmetric(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Set In Data Item LobeSymmetric (US), indicate whether the sidelobe is
symmetric.
- withLobeValueAngleAccuracy(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the measurement accuracy of the LobeValueAngle(s) in degrees.
- withLobeValueAngleHorz(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the azimuth angle between the sidelobe LobeValueLevel and the mainbeam
maximum power level.
- withLobeValueAngleVert(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the vertical angle between the sidelobe LobeValueLevel and the mainbeam
maximum power level.
- withLobeValueID(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set a unique (within the AntLobe) identifier for the Antenna lobe
measurement.
- withLobeValueLevel(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the ratio of the mainbeam power level to the sidelobe power level,
expressed as a positive value in dB.
- withLobeValueLevelAccuracy(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the measurement accuracy of the LobeValueLevel value in dB.
- withLobeValueName(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set a name for the Antenna lobe measurement.
- withLocale(Locale) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Set the Serial number Country part (REQUIRED).
- withLocale(Locale) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Set the Serial number Country part (REQUIRED).
- withLocalEventID(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the local event ID.
- withLocation(Location...) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the LocationRef
- withLocation(Collection<Location>) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the LocationRef
- withLocation(Location) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the unique reference serial of an existing Location dataset.
- withLocation(Location) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntryLocation
-
Set the serial of the referenced Location.
- withLocation(Location...) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the serial of the referenced Location.
- withLocation(Collection<Location>) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the serial of the referenced Location.
- withLocation(Location) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the serial of the referenced Location.
- withLocation(Location) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the unique reference serial of an existing Location dataset.
- withLocation(Location) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
Set the serial of the referenced Location.
- withLocation(Location...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withLocation(Collection<Location>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withLocationExcluded(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Set "Yes" to indicate that the LocSatRef is to be excluded from the
location set for the current station.
- withLocationRadius(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Set the radius associated with the Location to produce a circle.
- withLocationRef(Serial...) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
- withLocationRef(Collection<Serial>) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
- withLocationRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the serial of the referenced Location.
- withLocationRef(Serial...) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
- withLocationRef(Collection<Serial>) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
- withLocationRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the unique reference of an existing Location dataset that describes the
target location.
- withLocationRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
- withLocationRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
- withLocationRestriction(Location...) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Set
- withLocationRestriction(Collection<Location>) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Set
- withLocationRestrictionRef(Serial...) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Set the LocationRestriction
- withLocationRestrictionRef(Collection<Serial>) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Set the LocationRestriction
- withLocSat(Common<?>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Set the serial of a Location or Satellite dataset.
- withLocSat(Common<?>) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.StageLocation
-
Set the serial of a Location or satellite.
- withLocSat(Common<?>) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Set a reference to a geographic location or satellite associated with this
diagram endpoint.
- withLocSatRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
- withLocSatRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.StageLocation
-
- withLocSatRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
- withLOFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Set the maximum value of the LO frequencies.
- withLOFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Set the nominal LO frequency or minimum value of the LO frequency range.
- withLon(String) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the geographical longitude (degrees, minutes, seconds, and hemisphere E
or W) of the Point or center of the Ellipse.
- withLon(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the geographical longitude in decimal degrees.
- withLon(String) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set the geographical longitude (degrees, minutes, seconds, and hemisphere E
or W) of the Point or center of the Ellipse.
- withLon(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set the geographical longitude in decimal degrees.
- withLon(String) - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Set the geographical longitude (degrees, minutes, seconds, and hemisphere E
or W) of the Point or center of the Ellipse.
- withLon(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Set the geographical longitude in decimal degrees.
- withLon(String) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the geographical longitude of the target location, including hemisphere
(H).
- withLon(Double) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the geographical longitude of the target location in decimal degrees.
- withLowestUsableChannel(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Set the center frequency of the lowest channel usable within this
transmitter frequency range.
- withMajorFunction(ListUFN) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set the major (or primary) function of the frequency assignment.
- withManufacturer(Manufacturer...) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Set the Manufacturer
- withManufacturer(Collection<Manufacturer>) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Set the Manufacturer
- withMaxActiveFrames(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the maximum number of active frames (data blocks currently in use
directing equipment functionality) for a specific loadset.
- withMaxBitRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Set the maximum bit rate in kilobits per second applicable to digital
communications systems.
- withMaxBitRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the maximum bit rate in kilobits per second applicable to digital
communications systems.
- withMaxCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Set the highest classification that can be used for the email address.
- withMaxCls(ListCCL) - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Set the highest classification that can be used on the network.
- withMaxDevRatio(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the deviation ratio data applicable to frequency- or phase-modulation
equipment.
- withMaxGain(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the processing gain.
- withMaxPower(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the maximum level of input power.
- withMaxReactiveFrames(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the maximum number of reactive frames (data blocks planned to direct
equipment functionality in response to a stimulus) for a specific loadset.
- withMessage(Message) - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
Set the serial of the Message Dataset that is causing this response.
- withMessage(Message...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withMessage(Collection<Message>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withMessageRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Administrative
-
- withMinPointAngle(Double) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Set the minimum vertical pointing angle for satellite ground station
antennas.
- withMinSeparation(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Set the minimum frequency separation required at one transmitter or
receiver location.
- withMinutes(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the minutes of an hour (0-59) when the Assignment will be guarded
(monitored) or used for transmission.
- withMinutes(String) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the minutes of an hour [0-59] that the Force element is planned for
deployment.
- withMinutes(String) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the minutes of an hour [0-59].
- withMinutes(String) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the minutes of an hour [0-59].
- withMissing(Common<?>...) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Set the MissingRef
- withMissing(Collection<Common<?>>) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Set the MissingRef
- withMissingRef(Serial...) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
- withMissingRef(Collection<Serial>) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
- withMission(String) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the task expected to be accomplished by the loadset.
- withMissionCode(ListCMC) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the mission code representing the primary mission of the Force Element
(e.g.,Training, Finance, etc).
- withModAllowedBy(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- withModAllowedByRole(Role) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the serial of the Role which is authorized to modify the current
dataset.
- withModeID(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set a short name for the mode; this name should be a meaningful
identification of the mode, but it can also be automatically generated in
some systems.
- withModeID(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
Set the unique name of an AntMode of the Antenna specified in the
corresponding Serial field.
- withModeID(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxAntModeRef
-
- withModeID(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxModeRef
-
Set the unique identifier of a TxMode of the transmitter in this
configuration.
- withModeID(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set a short name for the mode; this name should be a meaningful
identification of the mode, but it can also be automatically generated.
- withModeID(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the unique identifier of a TxMode of the transmitter in this
configuration.
- withModeName(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set
- withModeName(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set a short name for the mode.
- withModeName(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set a short name for the mode.
- withModeUse(ListCAU) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set In Data Item ModeUse, indicate if the mode is used for transmit,
receive, or both transmit and receive.
- withModFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the maximum modulating frequency: - for a transmitter, measured on the
high side of the spectrum signature at the -3 dB point before the baseband
signal begins the up-conversion process; - for a receiver, frequency that
can be recovered and demodulated by the receiver.
- withModFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the minimum modulating frequency measured: - for a transmitter, on the
low side of the spectrum signature at the -3 dB point before the baseband
signal begins the up-conversion process; - for a receiver, at the -3 dB
point on the low frequency side of the receiver baseband, after detection
but prior to de-multiplexing or demodulation.
- withModulationType(ListUMD) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the type of modulation.
- withMonths(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the month of year [1-12] when the Assignment will be guarded
(monitored) or used for transmission.
- withMonths(String) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the month of year [1-12] that the Force element is planned for
deployment.
- withMonths(String) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the month of year [1-12].
- withMonths(String) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the month of year [1-12].
- withMOPAdaptiveDriverDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set the condition which controls, or can be associated with, the signal MOP
variations.
- withMOPAdaptiveDriverRuleDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set the rule which describes the signal MOP variations.
- withMOPAMPercentModulation(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set the AM Percent Modulation is the ratio (expressed as a percentage)
between the amplitude variation and the maximum amplitude
- withMOPChangeRateAM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPChangeRateAM (US), enter the change in amplitude
within the pulse.
- withMOPChangeRateCW(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPChangeRateCW (US), enter the change in continuous
wave frequency within the pulse.
- withMOPChangeRateFM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPChangeRateFM (US), enter the change in frequency
within the pulse.
- withMOPChangeRatePM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPChangeRatePM (US), enter the change in phase angle
within the pulse.
- withMOPContinuous(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPContinuous (US), indicate whether MOP or CW
modulation is Discrete or Continuous.
- withMOPDutyCycle(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set In Data Item US:MOPDutyCycle (US), enter as a percentage, the minimum
or nominal ratio of the pulse duration to the pulse period.
- withMOPDutyCycle(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US:MOPDutyCycle (US), enter as a percentage, the minimum
or nominal ratio of the pulse duration to the pulse period.
- withMOPDutyCycle(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPDutyCycle (US), enter as a percentage, the minimum
or nominal ratio of the pulse duration to the pulse period.
- withMOPFlyBackInterval(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPFlyBackInterval (US), enter the time duration
between the end of a continuous (linear) sweep and the beginning of the
next continuous (linear) sweep.
- withMOPID(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPID (US), enter a unique identifier (within the
TxMode) for the MOP data.
- withMOPMeanValueAM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPMeanValueAM (US), enter the average amplitude for a
signal which changes on a non-patterned basis within a pulse.
- withMOPMeanValueCW(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPMeanValueCW (US), enter the average continuous wave
frequency for a signal which changes on a non-patterned basis within a
pulse.
- withMOPMeanValueFM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPMeanValue (US), enter the average frequency for a
signal which changes on a non-patterned basis within a pulse.
- withMOPMeanValuePM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPMeanValue (US), enter the average phase angle for a
signal which changes on a non-patterned basis within a pulse.
- withMOPNumElements(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPNumElements (US), enter the number of discrete
FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any
repeated values are counted each time)
- withMOPNumElements(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set In Data Item US:MOPNumElements (US), enter the number of discrete
FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any
repeated values are counted each time)
- withMOPNumElements(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US:MOPNumElements (US), enter the number of discrete
FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any
repeated values are counted each time)
- withMOPNumElements(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPNumElements (US), enter the number of discrete
FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any
repeated values are counted each time)
- withMOPOffTime(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPOffTime (US), enter the duration of the state of the
modulated waveform with the absence of energy.
- withMOPOnTime(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPOnTime (US), enter the duration of the one on-time
related to the binary form of amplitude modulation called on-off keying.
- withMOPPatternName(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item MOPPatternName (US), enter a freeform text name for the
pattern (e.g., Phase Alpha).
- withMOPPatternPeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPPatternPeriod (US), enter the duration of one
complete cycle of Frequency, Phase or Amplitude variations for a signal
which changes on a patterned basis, within a pulse, for pulsed signals.
- withMOPPatternType(ListUS7) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPPatternType (US), indicate whether MOP or CW
characteristics are Patterned, Non-Patterned, Adaptive, or Unmodulated.
- withMOPPulseDurationLink(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPPulseDurationLink (US), enter the Discrete PD value
which is associated with the selected MOP name (i.e., the name in the MOP
Pattern List).
- withMOPRepetionInterval(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set the overall interval which may include multiple Sweep Repetition
Intervals (SRI).
- withMOPRepetionInterval(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set the overall interval which may include multiple Sweep Repetition
Intervals (SRI).
- withMOPRepetionInterval(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set the overall interval which may include multiple Sweep Repetition
Intervals (SRI).
- withMOPSequenceDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US:MOPSequenceDesc (US), enter a text description of the
MOP sequence.
- withMOPStepAM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set In Data Item US:MOPStepAM (US), enter the difference between adjacent
amplitude discrete power values, within a pulse.
- withMOPStepAM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US:MOPStepAM (US), enter the difference between adjacent
amplitude discrete power values, within a pulse.
- withMOPStepAM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPStepAM (US), enter the difference between adjacent
amplitude discrete power values, within a pulse.
- withMOPStepCW(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set In Data Item US:MOPStepCW(US), enter the difference between adjacent
continuous wave frequency discrete values, within a pulse.
- withMOPStepCW(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US:MOPStepCW(US), enter the difference between adjacent
continuous wave frequency discrete values, within a pulse.
- withMOPStepCW(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPStepCW(US), enter the difference between adjacent
continuous wave frequency discrete values, within a pulse.
- withMOPStepFM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set In Data Item US:MOPStepFM (US), enter the difference between adjacent
frequency discrete values, within a pulse.
- withMOPStepFM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US:MOPStepFM (US), enter the difference between adjacent
frequency discrete values, within a pulse.
- withMOPStepFM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPStepFM (US), enter the difference between adjacent
frequency discrete values, within a pulse.
- withMOPStepPM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set In Data Item US:MOPStepPM (US), enter the difference between adjacent
phase discrete values, within a pulse.
- withMOPStepPM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US:MOPStepPM (US), enter the difference between adjacent
phase discrete values, within a pulse.
- withMOPStepPM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPStepPM (US), enter the difference between adjacent
phase discrete values, within a pulse.
- withMOPSweepPeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set In Data Item US:MOPSweepPeriod (US), enter the time duration from a
point in the RF sequence (or continuous variation) to the like point in the
next repeating RF sequence (or continuous variation).
- withMOPTimeBWProduct(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPTimeBWProduct (US), enter the time-bandwidth product
of the waveform (actual PD times instantaneous bandwidth).
- withMOPType(ListUSX) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item MOPType (US), indicate if the information imprinted on the
pulse is modulated by amplitude (AM), frequency (FM), phase (PM), or is a
continuous wave (CW).
- withMOPValueAM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Set In Data Item US:MOPValueAM (US), enter specific data that describes the
Amplitude (AM) features of a signal impressed on a Pulse.
- withMOPValueCW(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Set In Data Item US:MOPValueCW (US), enter specific data that describes the
Continuous Wave (CW) features of a signal impressed on a Pulse.
- withMOPValueFM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Set In Data Item US:MOPValueFM (US), enter specific data that describes the
Frequency (FM) features of a signal impressed on a Pulse.
- withMOPValueMaxAM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMaxAM (US), enter the maximum change in
amplitude within the pulse.
- withMOPValueMaxCW(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMaxCW (US), enter the maximum change in
continuous wave frequency within the pulse.
- withMOPValueMaxFM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMaxFM (US), enter the maximum change in
frequency within the pulse.
- withMOPValueMaxPM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMaxPM (US), enter the maximum change in phase
angle within the pulse.
- withMOPValueMinAM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMinAM (US), enter the minimum change in
amplitude within the pulse.
- withMOPValueMinCW(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMinCW (US), enter the minimum change in
continuous wave frequency within the pulse.
- withMOPValueMinFM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMinFM (US), enter the minimum change in
frequency within the pulse.
- withMOPValueMinPM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item US:MOPValueMinPM (US), enter the minimum change in phase
angle within the pulse.
- withMOPValuePM(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Set In Data Item US:MOPValuePM (US), enter specific data that describes the
Phase (PM)features of a signal impressed on a Pulse.
- withMotionType(ListCAD) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the general category for the movement of a scanning or tracking
antenna.
- withMUXLevel(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set In Data Item US:MUXLevel (US), enter the signal power in dB referenced
to the baseband carrier for the companding of the multiplexed signal.
- withMUXScheme(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set In Data Item US:MUXScheme (US), enter a freetext description of the
multiplexing algorithm.
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Project
-
Set the name of the project.
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Manufacturer
-
Set the name of the company that manufactured the equipment.
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Set the standard military nomenclature.
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Set the name of this channel (e.g., "Video carrier, Sound carrier, Nicam
Sound carrier").
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.ChannelPlan
-
Set the name of this channel plan (e.g., "Plan for Wireless Microphones in
the Band 162-174 MHz").
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set the identifying term for the timing deconfliction protocol
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the name of the loadset.
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the name of the location.
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Set a human-readable name for the message.
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Set the externally-assigned name of the note.
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set an alternate name or nickname for the organisation.
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set In Data Item Name (US), enter a unique name (within the parent
RadiationPlan) for the Jamming Plan.
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set In Data Item Name (US), enter a descriptive name for the Radiation
Plan.
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the name or function of the Role.
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
Set the name of an associated earth station.
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set a human-readable name of a diagram endpoint, or Station.
- withName(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierTone
-
Set the name of the tone.
- withNarrowBandPlanning(NarrowBandPlanning...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Set the US:NarrowBandPlanning
- withNarrowBandPlanning(Collection<NarrowBandPlanning>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Set the US:NarrowBandPlanning
- withNATOPooledFrequencyCode(ListUPF) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the Type Special Assignment for the frequency assignment.
- withNATOPooledFrequencyNum(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the a Frequency Management Sub-committee (FMSC) assigned code number
identifying the type and nationality of a frequency pool.
- withNavAidsChannel(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set In Data Item NavAidsChannel, for TACAN and DME assignments, enter the
channel number of the allocated pair of radio frequencies assigned for use
by Air / Ground / Air radionavigation facilities such as: TACAN, VORTAC,
DME, MLS/DME, etc ...
- withNBFreq(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.NarrowBandPlanning
-
Set the transition frequency to comply with narrow band transition plans.
- withNecessaryBw(Double) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Emission
-
Set the necessary bandwidth which is defined as the value in MHz, for a
given class of emission, the width of the frequency band which is just
sufficient to ensure the transmission of information at the rate and with
the quality required under specified conditions.
- withNecessaryBw(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the necessary bandwidth which is defined as the minimum width of the
frequency band sufficient to ensure the transmission of information at the
required rate and quality.
- withNecessaryBw(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the necessary bandwidth which is defined as the minimum width of the
frequency band sufficient to ensure the transmission of information at the
required rate and quality.
- withNecessaryBwMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigEmission
-
Set the maximum necessary bandwidth in the case of a range of values.
- withNecessaryBwMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigEmission
-
Set the necessary bandwidth which is defined as the value in MHz, for a
given class of emission, the width of the frequency band which is just
sufficient to ensure the transmission of information at the rate and with
the quality required under specified conditions.
- withNetCircuitsAffected(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the network circuits affected by the interference.
- withNetNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set the net number in the format PXXXnn where 'P' is either A for HAVE
QUICK II or B for SATURN, XXX is in the range 000 through 999, and nn is
one of the following four modes: 00 - sub-band hopping mode (only for
SATURN), 25 - full-band hopping mode (HAVE QUICK II and SATURN), 50 -
SATURN mode, and 75 - SATURN mode
- withNetsAffected(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the networks affected by the interference.
- withNetworkName(String) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the name of the network to which the satellite belongs.
- withNoiseFigure(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the ratio of the output noise power to the portion of noise power
attributable to thermal noise in the input termination at 290 Kelvins.
- withNoiseTemp(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the absolute temperature of a passive system having an available noise
power per unit bandwidth at a specified frequency equal to that of the
actual terminals of a network.
- withNomenclature(Nomenclature...) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the Nomenclature
- withNomenclature(Collection<Nomenclature>) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the Nomenclature
- withNomenclature(Nomenclature...) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the Nomenclature
- withNomenclature(Collection<Nomenclature>) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the Nomenclature
- withNomenclature(Nomenclature...) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the Nomenclature
- withNomenclature(Collection<Nomenclature>) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the Nomenclature
- withNomenclature(Nomenclature...) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the Nomenclature
- withNomenclature(Collection<Nomenclature>) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the Nomenclature
- withNomenclature(Nomenclature...) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the Nomenclature
- withNomenclature(Collection<Nomenclature>) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the Nomenclature
- withNomenclature(Nomenclature...) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the Nomenclature
- withNomenclature(Collection<Nomenclature>) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the Nomenclature
- withNomenclature(Nomenclature...) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the Nomenclature
- withNomenclature(Collection<Nomenclature>) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the Nomenclature
- withNonGeoApogee(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the maximum altitude of the non-geostationary satellite relative to
Mean Sea Level (MSL).
- withNonGeoInclination(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the angle determined by the plane containing the orbit of the
non-geostationary satellite and the equatorial plane of the earth.
- withNonGeoNumSatellites(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the number of non-geostationary satellites in a system having similar
orbital characteristics.
- withNonGeoPerigee(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the minimum altitude of the non-geostationary satellite relative to
Mean Sea Level (MSL).
- withNonGeoPeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the time required for the non-geostationary satellite to make one
complete orbit around the earth.
- withNotation(Notation...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the Notation
- withNotation(Collection<Notation>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the Notation
- withNotationTimeline(NotationTimeline...) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Set the US:NotationTimeline
- withNotationTimeline(Collection<NotationTimeline>) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Set the US:NotationTimeline
- withNote(Note) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.RecordNote
-
Set a reference to the Note dataset that describes the note identified in
NoteCode.
- withNote(Note...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withNote(Collection<Note>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withNoteRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.RecordNote
-
- withNSEPUse(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the U.S.
- withNTIACoordinationRequired(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set if this application requires coordination with the National Authority
for approval.
- withNTIASpaceData(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the Space and terrestrial information as defined by section 10.8 of the
NTIA Manual and not captured in other more specific data fields.
- withNum(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the quantity of Force Element referenced in FERef.
- withNumAreaUnits(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the maximum number of units (equipment) that will be operating
simultaneously in the same area of operation.
- withNumAreaUnits(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the maximum number of units (equipment) that will be operating
simultaneously in the same area of operation.
- withNumBeamPositionsPerScan(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the number of beam positions (aka., dwells) per scan cycle
- withNumBeamPositionsTotal(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the total number of unique array beam positions resulting from the
frequency steps of a frequency scanning, phase changes, in phase scanning,
or discrete time delays in time delay steering.
- withNumBeamsPerRaster(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the number of beam positions necessary to complete one bar of the
raster scan.
- withNumber(String) - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Set the area code, telephone/telefax number (including the extension if
necessary) of individual or contact organisation.
- withNumCositedUnits(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the maximum number of units (equipment) that will be operating
simultaneously in the same cosite environment.
- withNumCositedUnits(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the maximum number of units (equipment) that will be operating
simultaneously in the same cosite environment.
- withNumEquip(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the total number of units to be built, procured or used during this
stage.
- withNumFreq(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Set the number of frequencies required.
- withNumFreqs(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the number of discrete frequencies or frequency ranges associated with
this Jamming Plan.
- withNumFreqsPerHopset(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the number of frequencies contained in a hop set.
- withNumFreqsRequired(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the total number of frequencies required.
- withNumHopsets(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the number of frequency hopsets employed when a system uses frequency
hopping spread spectrum modulation techniques, including hybrid direct
sequence and frequency hopping.
- withNumMobileUnits(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the number of mobile units (equipment).
- withNumMobileUnits(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the number of mobile units.
- withNumObsPositions(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the number of discrete ERP dwell/pulse groups, for a pulsed signal, or
ERP values at a constant ERP value, for a continuous wave (CW) signal,
observed in a signal which contains multiple and discrete ERP values that
change in a repeating ERP sequence.
- withNumObsValues(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the number of discrete ERP values observed for a signal which contains
multiple and discrete ERP values.
- withNumPDPositions(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the number of pulses (i.e., positions) in a repeating sequence of
pulses which has multiple (2 or more) PD values.
- withNumPDValues(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the number of discrete PD values (i.e., elements) in a repeating
sequence of pulses which has multiple (2 or more) PD values.
- withNumPresetChannels(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Set the number of preset channels available.
- withNumPresetChannels(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Set the number of preset channels available.
- withNumPRIElements(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the number of discrete PRI values in a repeating sequence of discrete
PRIs.
- withNumPRIPositions(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the number of time intervals between pulses or pulse groups, or the
number of PRI dwell groups, in a repeating PRI sequence which uses discrete
PRI values.
- withNumRastersPerCycle(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the number of 360 degree scans (aka, turns) a component of a scan makes
in the time it takes the Primary Scan to complete one complete cycle/scan.
- withNumRepeaters(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the total number of repeaters in the trunked land mobile system.
- withNumRFChannels(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the number of channels into which the RF range of the emitter is
divided.
- withNumRFElements(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the number of discrete RFs (channels) a multiple RF signal contains.
- withNumRFPositions(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the number of RF values in a signal RF sequence before it repeats.
- withNumRFSimultaneous(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set The number of frequencies simultaneously used by the emitter.
- withNumScanPositions(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the number of discrete values observed in a single repeating scan
period sequence.
- withNumScanValues(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the number of discrete values observed in multiple repeating scan
period sequences.
- withNumSideTones(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the number of side tone frequencies for the sidetones modulating the
carrier individually.
- withNumStates(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxModulation
-
Set the total number of states, e.g., 4 for 4-ary Phase Shift-Keying, 64
for 64 level Quadrature AM.
- withNumStates(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the total number of states, e.g., 4 for 4-ary Phase Shift-Keying, 64
for 64 level Quadrature AM.
- withNumStations(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.SysOfStation
-
Set the total number of stations associated with the Assignment.
- withNumSubCarriers(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the number of subcarrier frequencies for the subcarriers modulating the
carrier individually.
- withNumSubpulses(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the total number of subpulses (chips) contained in a radar coded pulse.
- withNumSystems(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the total number of systems that are expected to use this Assignment.
- withNumTiltAngleElements(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the number of unique discrete tilt angle values.
- withNumTiltAnglePositions(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the number of discrete Polarisation Tilt Angles used in a repeating
Polarisation Tilt Angle sequence.
- withNumUsers(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the number of users supported by the configuration.
- withNumUsers(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the total number of users of the trunked land mobile system.
- withObjectNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the USSPACECOM-assigned space object identification number.
- withObservedERPAnalysis(ObservedERPAnalysis...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the US:ObservedERPAnalysis
- withObservedERPAnalysis(Collection<ObservedERPAnalysis>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the US:ObservedERPAnalysis
- withObservedERPValues(ObservedERPValues...) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the US:ObservedERPValues
- withObservedERPValues(Collection<ObservedERPValues>) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPAnalysis
-
Set the US:ObservedERPValues
- withObservedFirstDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the date and time, based on Greenwich Mean Time (GMT), the subject
signal was first collected.
- withObservedFirstDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the date and time, based on Greenwich Mean Time (GMT), the subject
signal was first collected.
- withObservedFirstDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the date and time, based on Greenwich Mean Time (GMT), the subject
signal was first collected.
- withObservedFirstDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the date and time, based on Greenwich Mean Time (GMT), the subject
signal was first collected.
- withObservedLastDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the date and time, based on Greenwich Mean Time (GMT), the subject
signal was last collected.
- withObservedLastDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the date and time, based on Greenwich Mean Time (GMT), the subject
signal was last collected.
- withObservedLastDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the date and time, based on Greenwich Mean Time (GMT), the subject
signal was last collected.
- withObservedLastDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the date and time, based on Greenwich Mean Time (GMT), the subject
signal was last collected.
- withObservedLobeAnalysis(ObservedLobeAnalysis...) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the US:ObservedLobeAnalysis
- withObservedLobeAnalysis(Collection<ObservedLobeAnalysis>) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the US:ObservedLobeAnalysis
- withObservedLobeValues(ObservedLobeValues...) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Set the US:ObservedLobeValues
- withObservedLobeValues(Collection<ObservedLobeValues>) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeAnalysis
-
Set the US:ObservedLobeValues
- withObservedMOPAnalysis(ObservedMOPAnalysis...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the US:ObservedMOPAnalysis
- withObservedMOPAnalysis(Collection<ObservedMOPAnalysis>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the US:ObservedMOPAnalysis
- withObservedMOPBits(ObservedMOPBits...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set
- withObservedMOPBits(Collection<ObservedMOPBits>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set
- withObservedMOPSequence(ObservedMOPSequence...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set the US:ObservedMOPSequence
- withObservedMOPSequence(Collection<ObservedMOPSequence>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSweep
-
Set the US:ObservedMOPSequence
- withObservedMOPSweep(ObservedMOPSweep...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set the US:ObservedMOPSweep
- withObservedMOPSweep(Collection<ObservedMOPSweep>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set the US:ObservedMOPSweep
- withObservedMOPValues(ObservedMOPValues...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set
- withObservedMOPValues(Collection<ObservedMOPValues>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPBits
-
Set
- withObservedPDValue(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Set the observed PD data believed to be valid.
- withObservedPolarisationAnalysis(ObservedPolarisationAnalysis...) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the US:ObservedPolarisationAnalysis
- withObservedPolarisationAnalysis(Collection<ObservedPolarisationAnalysis>) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the US:ObservedPolarisationAnalysis
- withObservedPolarisationValues(ObservedPolarisationValues...) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the US:ObservedPolarisationValues
- withObservedPolarisationValues(Collection<ObservedPolarisationValues>) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the US:ObservedPolarisationValues
- withObservedPRFValue(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Set the observed PRF data believed to be valid.
- withObservedPRIValue(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Set the observed PRI data believed to be valid.
- withObservedPulseAnalysis(ObservedPulseAnalysis...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the US:ObservedPulseAnalysis
- withObservedPulseAnalysis(Collection<ObservedPulseAnalysis>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the US:ObservedPulseAnalysis
- withObservedPulseValues(ObservedPulseValues...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the US:ObservedPulseValues
- withObservedPulseValues(Collection<ObservedPulseValues>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the US:ObservedPulseValues
- withObservedRFAnalysis(ObservedRFAnalysis...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the US:ObservedRFAnalysis
- withObservedRFAnalysis(Collection<ObservedRFAnalysis>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the US:ObservedRFAnalysis
- withObservedRFValues(ObservedRFValues...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the US:ObservedRFValues
- withObservedRFValues(Collection<ObservedRFValues>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the US:ObservedRFValues
- withObservedScanAnalysis(ObservedScanAnalysis...) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the US:ObservedScanAnalysis
- withObservedScanAnalysis(Collection<ObservedScanAnalysis>) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the US:ObservedScanAnalysis
- withObservedScanValues(ObservedScanValues...) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the US:ObservedScanValues
- withObservedScanValues(Collection<ObservedScanValues>) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the US:ObservedScanValues
- withObserveTime(String) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the time interval for the recording of received signals, in (0-999)
hours, (0-59) minutes, and (0-999,999,999) nanoseconds (hhh.mm.sssssssss).
- withOccBw(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the minimum bandwidth utilized to process 99.5% of the emission
spectra.
- withOccBwCalculated(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
- withOffset(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.CurvePoint
-
Set a frequency difference (refer to data element Curve for use
instructions).
- withOffsetFreq(Double) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the frequency offset relative to the center frequency of the channel.
- withOffTheShelfEquipment(OffTheShelfEquipment...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:OffTheShelfEquipment
- withOffTheShelfEquipment(Collection<OffTheShelfEquipment>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:OffTheShelfEquipment
- withOOBJustification(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the justification for out-of-band frequency use.
- withOOKPattern(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set a text description of the on-off keying (OOK) pattern.
- withOperationalRFBW(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the delta (aka.
- withOperInvIntent(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set if the system is intended for the DoD operational inventory.
- withOrbitType(ListCSP) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the type of orbit.
- withOrg(String) - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Set the publishing organization of the source document.
- withOrganisation(String) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the name of the Organisation that published the Reference, if it cannot
be covered by a OrganisationRef
- withOrganisation(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Set the serial number Organization code (OPTIONAL).
- withOrganisation(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Set the serial number Organization code (OPTIONAL).
- withOrganisation(Organisation) - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
Set the unique reference of the Organisation associated with the current
Organisation.
- withOrganisation(Organisation...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withOrganisation(Collection<Organisation>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withOrigin(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.CodeList
-
Set the country or organisation which is using the modified or new code.
- withOriginalAssignmentDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date the frequency assignment was originally authorized.
- withOriginalAssignmentDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date the frequency assignment was originally authorized.
- withOriginatingAgency(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the agency that originated the application.
- withOscillatorTuning(ListCLO) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Set the relationship between the local oscillator frequency and the RF
centre frequency.
- withOtherHarmonicLevel(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the greatest out-of-band emission level at harmonic frequencies greater
than three times the fundamental frequency.
- withOutputDevice(String) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the name of the output device.
- withOutputDeviceType(ListCOT) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the type of the device.
- withOwner(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
- withOwnerOrg(Organisation) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
Set the serial of the owning, or originating, organisation.
- withOwnerOrgRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
- withOwnerRole(Role) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the serial of the Role which is responsible for the accuracy of the
data content.
- withOwnerType(ListUOW) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.AsgnAllotOwner
-
Set the relationship of an individual or organization to the frequency
assignment.
- withOwningCountry(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the owning country or body of the ForceElement.
- withOwningOrganisation(Organisation) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set
- withOwningOrganisationRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set a reference to the organisation that owns the ForceElement.
- withPairedASN(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Set the agency serial number of the assignment that is paired with this
Assignment in a repeater, duplex link or frequency diversity capability.
- withPairedFreq(PairedFreq...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Set the nominal frequency or minimum value of the frequency range, for the
paired frequency or frequency range when the allotment is for a duplex
system.
- withPairedFreq(Collection<PairedFreq>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Set the nominal frequency or minimum value of the frequency range, for the
paired frequency or frequency range when the allotment is for a duplex
system.
- withPairedFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Set the nominal frequency or minimum value of the frequency range, for the
paired frequency or frequency range when the allotment is for a duplex
system.
- withPairedType(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.PairedFreq
-
Set if the paired frequency is a transmitting repeater frequency, a
receiving repeater frequency, a duplex pairing, frequency diversity or
space diversity.
- withPDAdaptiveRuleDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the rule which describes the signal PD variations (aka.
- withPDContinuous(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set In Data Item PDContinuous (US), indicate whether pulse-to-pulse PD
variations are Discrete or Continuous.
- withPDDwellMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the maximum time duration for a complete dwell/group of pulses which
all have the same PD value.
- withPDDwellMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the minimum time duration for a complete dwell/group of pulses which
all have the same PD value.
- withPDExtremeMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the maximum PD value that represents 100% of observed values.
- withPDExtremeMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the minimum PD value that represents 100% of observed values.
- withPDMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the highest discrete PD value in a repeating sequence of pulses which
has multiple PD values
- withPDMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set for equipment having a capability for continuously variable PD over a
wide range.
- withPDMean(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the average PD of a signal which changes PD values on a non-patterned
basis.
- withPDMedian(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the PD value that the signal most often used, based on a statistical
study.
- withPDMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the delta lowest discrete PD value in a repeating sequence of pulses
which has multiple PD values
- withPDMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set a numeric value indicating the characteristic pulse duration of the
equipment at the half-power (-3 dB) points.
- withPDPatternPeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time duration for one complete cycle of a repeating sequence of
pulses which has multiple (2 or more) PD values; the time duration shall go
from a point in one cycle to a like point in the next cycle.
- withPDPatternType(ListUS7) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set In Data Item PDPatternType (US), Indicate whether PD is unmodulated or
pulse-to-pulse PD variations are Patterned, Non-Patterned, or Adaptive.
- withPDSequenceDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set a freetext description of the PD Sequence.
- withPDStdDev(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the standard deviation of the data sample used to calculate PD Mean.
- withPDStep(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the Step between adjacent PD values; pertains to discrete PD
variations.
- withPDTypicalMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the upper end of the range of PD values that represents 95% of observed
values, from a statistical study.
- withPDTypicalMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the lower end of the range of PD values that represents 95% of observed
values, from a statistical study
- withPerformanceEffects(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the effect the interference has on normal operations.
- withPeriod(ListCTI) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the general period on a daily basis when the frequency assignment
frequencies will be either guarded (monitored) or used for transmission.
- withPeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set the enter the elapsed time between On and Off Triggers (i.e.,
Operations).
- withPeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set In Data Item Period (US),- enter how often the frequency is being
monitored or jammed.
- withPeriod(ListCTI) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Time
-
Set the period of usage.
- withPhArrayNumElements(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the number of antenna elements in the phased array antenna.
- withPhArrayNumMainBeams(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the number of main beams in the phased array antenna.
- withPhysicalUsage(ListUS5) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Set In Data Item PhysicalUsage (US), indicate the type of vehicle or other
entity that uses the equipment, or from which the subject signal emanates.
- withPlatform(ListCET) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the type of platform.
- withPoc(Common<?>) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
Set the dataset identifier of the Contact, Organisation, or Role.
- withPoc(Common<?>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Set the reference to a Contact, Organisation, or Role responsible for this
status log entry or the recipient of the action.
- withPOCInformation(POCInformation...) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the POCInformation
- withPOCInformation(Collection<POCInformation>) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the POCInformation
- withPOCInformation(POCInformation...) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the POCInformation
- withPOCInformation(Collection<POCInformation>) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the POCInformation
- withPOCInformation(POCInformation...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the POCInformation
- withPOCInformation(Collection<POCInformation>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the POCInformation
- withPOCInformation(POCInformation...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the POCInformation
- withPOCInformation(Collection<POCInformation>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the POCInformation
- withPOCInformation(POCInformation...) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the POCInformation
- withPOCInformation(Collection<POCInformation>) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the POCInformation
- withPOCInformation(POCInformation...) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the POCInformation
- withPOCInformation(Collection<POCInformation>) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the POCInformation
- withPOCInformation(POCInformation...) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the POCInformation
- withPOCInformation(Collection<POCInformation>) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the POCInformation
- withPOCInformation(POCInformation...) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the POCInformation
- withPOCInformation(Collection<POCInformation>) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the POCInformation
- withPOCInformation(POCInformation...) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the POCInformation
- withPOCInformation(Collection<POCInformation>) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the POCInformation
- withPOCInformation(POCInformation...) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the POCInformation
- withPOCInformation(Collection<POCInformation>) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the POCInformation
- withPOCInformation(POCInformation...) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the POCInformation
- withPOCInformation(Collection<POCInformation>) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the POCInformation
- withPOCInformation(POCInformation...) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the POCInformation
- withPOCInformation(Collection<POCInformation>) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the POCInformation
- withPOCRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Set the reference to a Contact, Organisation, or Role responsible for this
status log entry or the recipient of the action.
- withPoint(Point...) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the antenna feed point height above the terrain, in metres.
- withPoint(Collection<Point>) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the antenna feed point height above the terrain, in metres.
- withPointingAzMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the maximum antenna azimuth angle.
- withPointingAzMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the starting azimuth if an azimuth range is reported; otherwise, enter
a single azimuth.
- withPointingElevMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the maximum antenna elevation angle.
- withPointingElevMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the minimum antenna elevation angle.
- withPointToMultiPoint(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramEndpoint
-
Set "Yes" if the diagram endpoint participates in point-to-multipoint
links.
- withPolarisationAngle(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the angle of the electric field vector measured counter-clockwise from
the equatorial plane as referenced from the boresight or typical static
positioning of the antenna.
- withPolarisationDirection(ListCRD) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the direction in which the polarisation ellipse is mechanically
rotating.
- withPolarisationRotationRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the number of times per second that the polarisation ellipse
mechanically rotates through the same major axis tilt angle.
- withPolarisationSense(ListCRD) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the rotation direction of the radiated electromagnetic wave electric
field (E-field) vector (E) relative to the direction of propagation.
- withPolarisationType(ListCPO) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the principal orientation of the electric field of the electromagnetic
wave for an antenna.
- withPolarisationType(ListCPO) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the polarisation of the radio wave referenced to the direction of
propagation.
- withPolarisationType(ListCPO) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the antenna polarisation planned for the desired jamming instance.
- withPolygon(Polygon...) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the Polygon
- withPolygon(Collection<Polygon>) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the Polygon
- withPolygonPoint(PolygonPoint...) - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Set the PolygonPoint
- withPolygonPoint(Collection<PolygonPoint>) - Method in class us.gov.dod.standard.ssrf._3_1.location.Polygon
-
Set the PolygonPoint
- withPortIsolation(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the power ratio between the signal injected into one port and the power
returned by the other port .
- withPostCode(String) - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Set the zip code or postal code portion of the address.
- withPostCode(String) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the zip code or postal code portion of the address.
- withPostDetectionFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the maximum post detection frequency at the baseband half-power point.
- withPostDetectionFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the maximum post detection frequency at the baseband half-power point.
- withPotentialVictims(PotentialVictims...) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Set the US:PotentialVictims
- withPotentialVictims(Collection<PotentialVictims>) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Set the US:PotentialVictims
- withPower(Double) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Emission
-
Set the maximum authorised power in dBW, for the given class of emission.
- withPower(Double) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set the desired power value planned to be directed at the target.
- withPower(Power...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the power limit of this transmitter mode when in this configuration.
- withPower(Collection<Power>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the power limit of this transmitter mode when in this configuration.
- withPowerLimit(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the power limit of the transmissions in this configuration.
- withPowerLimit(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxModeRef
-
Set the power limit of this transmitter mode when in this configuration.
- withPowerMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Set the maximum transmitter power.
- withPowerMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Set the nominal transmitter power, or the minimum power in case of a range
of values.
- withPowerType(ListCPT) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the power type code for carrier, mean, or peak envelope power emitted.
- withPowerType(ListCPT) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Power
-
Set the power type code for carrier, mean, or peak envelope power emitted.
- withPreferred(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Set a code "Yes" for the preferred address(es) and a code "No" for the
others.
- withPreferred(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Set a code "Yes" for the preferred number(s) and a code "No" for the
others.
- withPreselectionType(String) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the type of preselection used in the receiver frontend.
- withPreviousAuthorization(PreviousAuthorization...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:PreviousAuthorization
- withPreviousAuthorization(Collection<PreviousAuthorization>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:PreviousAuthorization
- withPreviousSPSDocketNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the IRAC Spectrum Planning Subcommittee (SPS) docket number of the NTIA
Certification of Spectrum Support for the existing trunked system.
- withPRFChangeRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the rate of change for PD variations expressed as PD change per unit of
time.
- withPRFExtremeMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the minimum Observed PRF in the signal sample.
- withPRFExtremeMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the minimum Observed PRF in the signal sample.
- withPRFMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the highest discrete PRI value (convert PRI to PRF) which are found in
a single intercept that contains the complete PRI characteristics for that
specific data set.
- withPRFMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the lowest discrete PRI value (convert PRI to PRF) which are found in a
single intercept that contains the complete PRI characteristics for that
specific data set.
- withPRFTypicalMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the upper end of the range of PRF values that represents 95% of
observed values, from a statistical study.
- withPRFTypicalMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the lower end of the range of PRF values that represents 95% of
observed values, from a statistical study
- withPRIAdaptiveDriverDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the condition which controls or can be associated with the signal PRI
variations (aka, interpulse modulation changes).
- withPRIAdaptiveRuleDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the rule which describes the signal PRI variations (aka, interpulse
modulation changes)
- withPRIAnomalousValues(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set any regularly occurring signal values which do not fit in any of the
other PRI related fields.
- withPRIBasicClockPeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the fundamental period of the emitter clock which is used to generate
the subject signal PRIs
- withPRIChangeRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the PRI change per unit of time, measured over a significant portion of
the waveform.
- withPRIContinuous(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set In Data Item PRIContinuous (US), Indicate whether pulse-to-pulse PRI
variations are Discrete or Continuous.
- withPRICountdown(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the integer (aka, count or countdown) associated with the PRI Crystal
value to provide the Pattern Period.
- withPRICountdownKey(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the integer (aka, count or countdown) used to generate the PRI from the
PRI Crystal value.
- withPRIExtremeMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the maximum observed PRI value, from a statistical study of a 100% data
set.
- withPRIExtremeMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the minimum observed PRI value, from a statistical study of a 100% data
set.
- withPRIFramePeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time difference between a point on the leading edge of the frame
marker (or an alternate pulse in the frame), to the similar point on the
leading edge of the frame marker (or the alternate pulse) in the
next/consecutive frame.
- withPRIFrameRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the rate of frame generation during the Pulse Repetition Interval.
- withPRIGroupPulseSpacing(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time difference between a point on the leading edge of the subframe
marker (or an alternate pulse in the subframe), to the similar point on the
leading edge of the subframe marker (or the alternate pulse in the
subframe) in the next/consecutive frame.
- withPRIGroupSpacing(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the PRI between two groups of pulses which both have constant but
different PRIs (aka, the PRI between consecutive PRI dwell groups).
- withPrimaryFirmware(String) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the mission-independent software that is "burned" and which stays
resident on the RF jamming hardware.
- withPrimaryStation(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set whether this station is the station of primary regulatory interest.
- withPrimaryStation(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set
- withPRIMean(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the average PRI value for a signal which changes PRI values on a
non-patterned basis.
- withPRIMedian(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the observed PRI value that the signal most often used based on
statistical study of a data set.
- withPRIMedianCountdowns(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the observed PRI Crystal Counts used to generate the PRIs used most
often by the signal, based on statistical study of a data set.
- withPriority(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Set a number from 0 to 9 that is used to influence the positioning of the
Assignment in the ordering of the assignment process, where 9 represents
the highest priority and 0 is the lowest priority.
- withPriority(String) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the assigned priority code consisting of a letter followed by a number
in the range A1 through Z9, with A1 being the highest priority (all Taboo
nets should be assigned an A1 priority code).
- withPriority(ListCPS) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set if this spectrum use is Primary, Secondary or Permitted, as defined by
the system use and the appropriate Administration Frequency Allocation
Table/guidance.
- withPriority(ListUWE) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the relative priority of the service request.
- withPriority(ListCPS) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set if this service is a primary or secondary use of this band.
- withPriority(ListCPS) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Set if this service is a primary or secondary use of this band.
- withPRIPatternPeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time duration for one complete cycle of a repeating PRI sequence.
- withPRIPatternType(ListUS7) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set whether the PRI is unmodulated or pulse-to-pulse PRI variations are
Patterned, Non-Patterned, or Adaptive.
- withPRIPulsesPerGroup(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the number of pulses in a pulse group.
- withPRISequenceDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set a free text description of the PRI Sequence.
- withPRIStability(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the variation of a mean PRI value measured from one time to another
time
- withPRIStabilitySamplePeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time interval used to determine the PRI stability value.
- withPRIStdDev(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the standard deviation associated with the data set used to calculate
the values entered in the PRI Mean fields
- withPRIStep(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the delta between the Most Probable observed PRI values of adjacent and
discrete PRI.
- withPRISubframePeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time difference between a point on the leading edge of the subframe
marker (or an alternate pulse in the subframe), to the similar point on the
leading edge of the subframe marker (or the alternate pulse in the
subframe) in the next/consecutive frame.
- withPRISubframeRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the number of subframes detected during each PRI Subframe period.
- withPRITimingShift(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the PRI timing shift value, on Emitters with repeated timing shifts of
a predictable magnitude, but not predictable timing.
- withPRITypicalMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the upper end of the range of PRI values that represent 95% of the
signal observed PRI values, from a statistical study of a data set.
- withPRITypicalMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the lower end of the range of PRI values that represent 95% of the
signal observed PRI values, from a statistical study of a data set.
- withProcessing(ListCPI) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set if the frequency assignment is to be approved at the national or
international level.
- withProcessingGainMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the maximum ratio of the post processing signal-to-noise ratio to the
received signal-to-noise ratio.
- withProcessingGainMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the minimum ratio of the post processing signal-to-noise ratio to the
received signal-to-noise ratio.
- withProject(Project...) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the Project
- withProject(Collection<Project>) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the Project
- withProject(Project...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the Project
- withProject(Collection<Project>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the Project
- withProject(Project...) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the Project
- withProject(Collection<Project>) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the Project
- withProject(Project...) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the Project
- withProject(Collection<Project>) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the Project
- withProject(Project...) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the Project
- withProject(Collection<Project>) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the Project
- withProperties(SSRFProperties) - Method in class us.gov.dod.standard.ssrf.SSRF
-
Set the SSRF Properties for this SSRF instance.
- withProperty(String, String) - Method in class us.gov.dod.standard.ssrf.SSRF
-
Set a SSRF property.
- withProtectionCode(ListCPC) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set In Data Item ProtectionCode, indicate the type of JRFL entry.
- withPRRMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set for equipment having a capability for continuously variable PRR over a
wide range.
- withPRRMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the numeric value for the pulse repetition rate (PRR) of the equipment.
- withPulse(Pulse...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the number of pulses in a single pulse burst.
- withPulse(Collection<Pulse>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the number of pulses in a single pulse burst.
- withPulseChirpDurationMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the maximum duration (pulsewidth) of the chirp signal.
- withPulseChirpDurationMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the duration (pulsewidth) of the chirp signal.
- withPulseChirpFreqShift(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the difference between the starting and stopping frequency of a chirped
pulse signal.
- withPulseChirpRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set for linear frequency modulation, the constant rate at which the radio
frequency of a pulse is increased throughout the width of the pulse.
- withPulseFreqDev(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set In Data Item PulseFreqDev, Enter, for FM pulse radars, the total
frequency shift during the pulse width.
- withPulseWidth(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ConfigFreq
-
Set the collected EW channel dwell for the Chirped Signal.
- withQuality(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Assigned
-
Set an application-specific measure of the quality for the assigned
frequency.
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withQuality(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set one or more data quality indicator(s), separated by "|” (i.e., ASCII
character #124), for the contents of the associated Data Item For example,
"Outlier" | "Non-CodeList".
- withRadarProcessingGainMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set the maximum ratio of the post-processing signal-to-noise ratio to the
received signal-to-noise ratio.
- withRadarType(ListCRA) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the type of radar.
- withRadiationPlan(RadiationPlan...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withRadiationPlan(Collection<RadiationPlan>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withRadioService(ListCSN) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
Set the Radiocommunication Service associated with the frequency usage in
this configuration.
- withRanking(ListUTM) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set the ranking level of the timing deconfliction protocol.
- withRatio(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.VSWR
-
Set the standing wave ratio referenced to the specific frequency, as a
number without unit (e.g., enter "2" to represent a ratio of 2:1).
- withReason(String) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Set the reason linked to the Action performed on this dataset.
- withReceiver(Receiver) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Set the identifier of the related Receiver used in this configuration.
- withReceiver(Receiver...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withReceiver(Collection<Receiver>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set a value that is most probably correct.
- withRecommendedValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set a value that is most probably correct.
- withRecordNote(RecordNote...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:RecordNote
- withRecordNote(Collection<RecordNote>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:RecordNote
- withRedacted(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set In Data Item Redacted (US), indicate if any original, or authoritative,
data was omitted.
- withReferencedStage(ListCSG) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the spectrum certification stage associated with this information.
- withRefFreq(Double) - Method in class us.gov.dod.standard.ssrf._3_1.AsgnFreqBase
-
Set
- withRelated(Common<?>...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the RelatedRef
- withRelated(Collection<Common<?>>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the RelatedRef
- withRelatedAnalysisAndTestData(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set In Data Item RelatedAnalysisAndTestData (US), describe electromagnetic
compatibility studies, testing or analyses relevant to this system,
including documents currently in progress.
- withRelatedOrganisation(RelatedOrganisation...) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the RelatedOrganisation
- withRelatedOrganisation(Collection<RelatedOrganisation>) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the RelatedOrganisation
- withRelatedRef(Serial...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
- withRelatedRef(Collection<Serial>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
- withRelatedSupportability(RelatedSupportability...) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the RelatedSupportability
- withRelatedSupportability(Collection<RelatedSupportability>) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the RelatedSupportability
- withRelatedSystem(RelatedSystem...) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the RelatedSystem
- withRelatedSystem(Collection<RelatedSystem>) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the RelatedSystem
- withRelation(ListCFR) - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
Set the relationship between the two organisations.
- withRelation(ListCFR) - Method in class us.gov.dod.standard.ssrf._3_1.rfsystem.RelatedSystem
-
Set the relationship between the two systems.
- withReleasability(ListCCY...) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a list of country codes for which the current data item is releasable.
- withReleasability(Collection<ListCCY>) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a list of country codes for which the current data item is releasable.
- withRelinquishmentDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Set the expected date the existing assignment will be relinquished by the
trunked land mobile system.
- withRelinquishmentDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.TrunkingAssignment
-
Set the expected date the existing assignment will be relinquished by the
trunked land mobile system.
- withRemarkRef(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set remarks - Links to Data Item Remarks (Optional)
- withRemarkRef(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set remarks - Links to Data Item Remarks (Optional)
- withRemarkRef(Remarks) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a single remark - Links to Data Item Remarks (Optional)
- withRemarkRef(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarkRef(Set<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.AMetadata
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set the Any additional data to be submitted by the applicant that cannot be
accommodated in any of the other data items in the Government Master File
(GMF).
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set the Any additional data to be submitted by the applicant that cannot be
accommodated in any of the other data items in the Government Master File
(GMF).
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Remarks...) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<Remarks>) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(BigInteger...) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRemarks(Collection<BigInteger>) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set a list of Common/Remarks idx values applicable to the current data
item.
- withRepeat(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set In Data Item Repeat (US), indicate if the attached file should be
repeatedly viewed / listened to.
- withRepeater(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set "Yes" for each receiver location when a station in the fixed or mobile
service is used primarily as a repeater.
- withReplacementInfo(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the name of the systems that are likely to be replaced by this system.
- withReplyingAuthority(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the name of the organization providing the reply.
- withReplyingCountry(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the code of the country providing the reply.
- withRequestedFreq(AsgnFreqBase...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Set the Requested Freq: a single frequency or a range of frequencies.
- withRequestedFreq(Collection<AsgnFreqBase>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Set the Requested Freq: a single frequency or a range of frequencies.
- withRequestForExpansion(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set if this application is a request for expansion.
- withRequestType(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the request type.
- withRequired(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set if a common timing deconfliction protocol is required for processing
the subject signal.
- withRequiredEffect(ListUWA) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the desired effect of this service request.
- withRequiredPerformance(ListUWB) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the desired effectiveness of the service request.
- withRequirement(String) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set any amplifying information on the requirement.
- withRequirement(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set any amplifying information about the requirement.
- withRequirement(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set a description of the types and forms of information to be transmitted
or received.
- withResetProcedure(String) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the instructions for zeroing/sanitizing the jamming equipment to
initial operating conditions.
- withResourceLocator(String) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set either the file name (including the extension) of the reference
document when it is attached to the dataset, or an URL (Uniform Resource
Locator) to find the document.
- withRetireDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Set the date this Dataset goes out of force.
- withRetireDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Set the date this Dataset goes out of force.
- withReviewDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set a description of the justification of why the JRFL entry is required,
to support the spectrum manager.
- withReviewDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set a description of the justification of why the JRFL entry is required,
to support the spectrum manager.
- withReviewDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the date by which the dataset is to be reviewed.
- withReviewDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the date by which the dataset is to be reviewed.
- withRFAdaptiveDriver(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the condition controlling the choice of RF for Adaptive RF variations
(e.g., least jammed frequency)
- withRFAdaptiveRule(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set In Data Item RFAdaptiveRule (US), indicate how the RF is chosen for
Adaptive RF variations.
- withRFBasicClockPeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the frequency divisor common to all RF separations (not necessarily to
all RF) RF crystal is not always the same as the RF channelization (min).
- withRFChangeRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the RF change per unit of time, measured over a significant portion of
the waveform.
- withRFChannelFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the maximum RF channel values.
- withRFChannelFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the minimum RF channel values.
- withRFCoherent(ListUSY) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set In Data Item RFCoherent (US), indicate if the observed RF signal is
coherent, non-coherent, or unknown.
- withRFContinuous(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set whether pulse-to-pulse RF variations are Discrete or Continuous.
- withRFFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the typical highest RF value observed on a single intercept.
- withRFFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the typical lowest RF value observed on a single intercept.
- withRFFreqTolerance(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the drift in Hz or in ppm using the formula: Frequency tolerance (ppm)
= Maximum drift (Hz) / Center frequency (MHz).
- withRFFreqToleranceInterval(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set In Data Item:RFFreqToleranceInterval (US), enter the time interval over
which the RF stability measurements were taken.
- withRFFreqToleranceUnit(ListCFO) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the units in which the Frequency Tolerance is expressed.
- withRFMean(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the average RF of a signal which changes RFs on a non-patterned basis.
- withRFMedian(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the most probable RF values.
- withRFPatternPeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the duration of one cycle of the pattern for patterned RF variations.
- withRFPatternType(ListUS7) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set In Data Item RFPatternType (US), Indicate whether RF is unmodulated or
pulse-to-pulse RF variations are Patterned, Non-Patterned, or Adaptive.
- withRFRestFreq(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the observed carrier or rest frequency when the modulation is off.
- withRFSequenceDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set a free text description of the RF Sequence.
- withRFSlotDuration(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the duration of a single time slot for the hop dwell.
- withRFStandardDeviation(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the standard deviation of the data set used to calculate RF Mean.
- withRfSystem(RFSystem) - Method in class us.gov.dod.standard.ssrf._3_1.rfsystem.RelatedSystem
-
Set the reference of the System associated with the current System.
- withRFSystem(RFSystem...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withRFSystem(Collection<RFSystem>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withRFSystemRef(Serial...) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the RFSystemRef
- withRFSystemRef(Collection<Serial>) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the RFSystemRef
- withRFTuningStep(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the separation between the mean RF values of adjacent RFs in signal
with discrete RF channels.
- withRFValue(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFValues
-
Set the observed signals values
- withRiseTime(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseAnalysis
-
Set the time required for a pulse to rise from 10% to 90 percent of the
mean peak amplitude of the voltage pattern.
- withRiseTime(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.Pulse
-
Set an operational justification for short pulse rise time.
- withRole(ListUS2) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.UsingCountries
-
Set the role of the country associated with the emitter that transmits the
subject Notation/Signal.
- withRole(ListCSR) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the code used to document the main role of the Force Element.
- withRole(Role...) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the RoleRef
- withRole(Collection<Role>) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the RoleRef
- withRole(Role...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withRole(Collection<Role>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withRoleRef(Serial...) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
- withRoleRef(Collection<Serial>) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
- withRotationDirection(ListCRD) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the antenna direction of rotation or motion.
- withRotationRateMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set if applicable, the maximum antenna rotation rate.
- withRotationRateMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the nominal or minimum antenna rotation rate.
- withRoutineAgendaItem(ListURI) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the type of National Telecommunications and Information Administration
(NTIA) Frequency Assignment Subcommittee (FAS) agenda on which the
application will be processed.
- withRxAntModeRef(RxAntModeRef...) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Set the RxAntModeRef
- withRxAntModeRef(Collection<RxAntModeRef>) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Set the RxAntModeRef
- withRxDuration(String) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the amount of time that the equipment will monitor the spectrum before
initiating an action, in (0-999) hours, (0-59) minutes, and (0-999,999,999)
nanoseconds (hhh.mm.sssssssss).
- withRxEndpointID(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramLine
-
Set the Endpoint ID at the terminating (receiving) endpoint of a line on
the diagram.
- withRxMode(RxMode...) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the RxMode
- withRxMode(Collection<RxMode>) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the RxMode
- withRxModeRef(RxModeRef...) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Set the RxModeRef
- withRxModeRef(Collection<RxModeRef>) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
Set the RxModeRef
- withRxModulation(RxModulation...) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the RxModulation
- withRxModulation(Collection<RxModulation>) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the RxModulation
- withRxRef(RxRef...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the RxRef
- withRxRef(Collection<RxRef>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the RxRef
- withRxSignalTuning(RxSignalTuning...) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the RxSignalTuning
- withRxSignalTuning(Collection<RxSignalTuning>) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the RxSignalTuning
- withRxType(ListCRT) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the type of receiver.
- withSATCOMPriority(ListUPR) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the satellite communication priority.
- withSatellite(Satellite...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withSatellite(Collection<Satellite>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withSatelliteAffected(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set whether the interference affects satellite reception.
- withSatelliteChannel(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the identifier of satellite channel experiencing the interference.
- withSatelliteDownlinkPolarisation(ListCPO) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the polarisation of the satellite downlink signal.
- withSatelliteHemisphere(ListCCO) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the satellite hemisphere.
- withSatelliteLongitude(Double) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the satellite longitude in decimal degrees.
- withSatelliteName(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the name of the satellite experiencing the interference.
- withSatelliteTransponderID(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the satellite transponder ID.
- withSatelliteUplinkFreq(Double) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the satellite uplink frequency experiencing the interference
- withSatelliteUplinkPolarisation(ListCPO) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the polarisation of the satellite uplink signal.
- withScanAdaptiveDriverDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the condition which controls or can be associated with the signal Scan
Period variations.
- withScanAdaptiveRuleDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the rule which describes the signal Scan Period variations.
- withScanAngleAzStart(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the maximum angle the subject emitter antenna mainbeam (aka., mainlobe)
reaches in the horizontal plane (aka., azimuth).
- withScanAngleAzStop(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the minimum angle the subject emitter antenna mainbeam (aka., mainlobe)
reaches in the horizontal plane (aka., azimuth).
- withScanAngleElevStart(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the maximum angle the subject emitter antenna mainbeam (aka., mainlobe)
reaches in the vertical plane (aka., elevation).
- withScanAngleElevStop(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the minimum angle the subject emitter antenna mainbeam (aka., mainlobe)
reaches in the vertical plane (aka., azimuth).
- withScanDwell(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the scan duration
- withScanDwellSequence(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the Sequence of dwell durations, with elevation and azimuth.
- withScanDwellTime(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set the time duration for a complete dwell/group of scan cycles which all
have the same Scan Period Discrete value before changing to a different
one.
- withScanElevContinuous(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set In Data Item ScanElevContinuous (US), indicate the if the scan
elevation progression is a continuous sweep.
- withScanPatternType(ListUS7) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set In Data Item ScanPatternType (US), indicate whether the Scan Period is
unmodulated, Patterned, Non-Patterned, or Adaptive.
- withScansHorzContinuous(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set In Data Item ScanHorzContinuous (US), indicate the if the scan azimuth
progression is a continuous sweep.
- withScanType(ListUS8) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanAnalysis
-
Set In Data Item ScanType (US), indicate if the observed data was detected
via a primary or secondary scan.
- withScanValue(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanValues
-
Set the observed scan rate values
- withSecondaryDatasets(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.Message
-
Set In Data Item SecondaryDatasets, indicate if datasets referenced by the
primary dataset are included.
- withSecondaryFirmware(String) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set alternate mission-independent software that is "burned" and which stays
resident on the RF jamming hardware.
- withSecondHarmonicLevel(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the out-of-band emission level at the frequency that is two times the
fundamental frequency.
- withSeconds(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the seconds of hour [0-59] when the Assignment will be guarded
(monitored) or used for transmission.
- withSeconds(String) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the seconds of hour [0-59] that the Force element is planned for
deployment.
- withSeconds(String) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set In Data Item Seconds,enter the seconds of hour [0-59]
- withSeconds(String) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set In Data Item Seconds,enter the seconds of hour [0-59]
- withSectBlanking(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set "Yes" if sector blanking is possible and "No" if it is not possible.
- withSecurityClass(SecurityClass) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the US:SecurityClass
- withSemiMajorAxis(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the length of the semi-major axis of the ellipse.
- withSemiMinorAxis(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.Ellipse
-
Set the length of the semi-minor axis of the ellipse.
- withSensitivityCriteriaLevel(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the value of the criteria; the meaning and unit of this value depends
on the Sensitivity Criteria Type selected.
- withSensitivityCriteriaText(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the value of the criteria when it cannot be expressed as a number.
- withSensitivityCriteriaType(ListCSE) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the criteria used to determine the minimum RF signal power present at
the input terminals that ensures acceptable detection and demodulation of
the desired signal.
- withSensitivityLevel(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the minimum RF signal power level as it relates to one of the four
Sensitivity Criteria Types: PWOP, SINAD, S/N or S+N/N indicated in item
SensitivityCriteriaType.
- withSeparateSystemJustification(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the For trunked land mobile systems that are within 30 km of an
existing or planned trunked land mobile system authorised by NTIA, provides
the information required under subparagraph 8.2.48a of the NTIA Manual
("Procedures and Principles for the Assignment and Coordination of
Frequencies, Land Mobile Radio Communications").
- withSequence(BigInteger) - Method in class us.gov.dod.standard.ssrf._3_1.location.PolygonPoint
-
Set a unique, sequenced, index for each point describing the current
polygon.
- withSequenceBitLength(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPSequence
-
Set In Data Item US: SequenceBitLength (US), enter the length of one
sequence of a pattern of bits that been observed repeating.
- withSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Dataset
-
Set the serial of the referenced Dataset.
- withSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
- withSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set a unique Dataset identifier.
- withSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.Assets
-
- withSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntryLocation
-
- withSerial(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Set the serial number Serial identifier (REQUIRED).
- withSerial(Long) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Set the serial number Serial identifier (REQUIRED) as a Long Number
instance.
- withSerial(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Set the serial number Serial identifier (REQUIRED).
- withSerial(Long) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Set the serial number Serial identifier (REQUIRED) as a Long Number
instance.
- withSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxAntModeRef
-
- withSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxRef
-
- withSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxAntModeRef
-
- withSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
- withSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
- withSerial(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.rfsystem.RelatedSystem
-
- withServiceArea(ServiceArea...) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the ServiceArea
- withServiceArea(Collection<ServiceArea>) - Method in class us.gov.dod.standard.ssrf._3_1.Satellite
-
Set the ServiceArea
- withServiceVolumeHeight(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Set the altitude of aeronautical navigational aids, air traffic control
assignments for radio frequencies above 30 MHz, and low-frequency beacons.
- withServiceVolumeLocRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Set the reference to a Location for an aeronautical coverage area.
- withServiceVolumeRadius(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationLoc
-
Set the radius associated with the Location to produce a circle.
- withShape(ListCRS) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set a code used to describe the general shape of the antenna reflector.
- withSidebandSuppressed(ListCSI) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the sideband that is suppressed in a single sideband signal.
- withSidebandSuppression(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the amount that one or both of the sidebands of a signal are reduced
prior to transmission.
- withSignal(String) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the waveform information modulated, or impressed, on the carrier.
- withSignalDurationMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the maximum time value for how long the tone persists in the baseband.
- withSignalDurationMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the minimum time value for how long the tone persists in the baseband.
- withSignalSequenceDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the pattern of occurrence of sub-signals.
- withSignalShape(ListUSS) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the basic shape of the signal.
- withSignalType(ListCMO) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Baseband
-
Set the type of modulation.
- withSignalType(ListCMO) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis
-
Set In Data Item SignalType (US), indicate the specific type of modulation
used/detected.
- withSiteElevation(Double) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.EndpointLocation
-
Set the site elevation of each base station and repeater in a trunking
system.
- withSoftware(String) - Method in class us.gov.dod.standard.ssrf._3_1.Loadset
-
Set the mission-specific software that is loaded on the RF jamming
hardware.
- withSolution(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set what actions were taken to resolve the interference.
- withSource(String) - Method in class us.gov.dod.standard.ssrf._3_1.Note
-
Set the source or creator of the note.
- withSource(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.CommentSource
-
Set the name of the organisation or authority that is the source of the
comment.
- withSourceAz(Double) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the measured azimuth of the source from the victim.
- withSourceClsDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the date this classified dataset was prepared, i.e., the Original
Classification Date.
- withSourceClsDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.common.SecurityClass
-
Set the date this classified dataset was prepared, i.e., the Original
Classification Date.
- withSourceEmsBw(Double) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the calculated or measured bandwidth of the interference source.
- withSourceEmsClass(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set In Data Item SourceEmsClass, In Data Item EmsClass, enter a three to
five characters code, derived from the table below, representing the
emission classification.
- withSourceFieldStrength(Double) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the measured electromagnetic field strength.
- withSourceFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the maximum frequency of the interference, in case of a range.
- withSourceFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the nominal frequency of the interference, or the minimum frequency in
case of a range.
- withSourceLat(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the geographical latitude (degrees, minutes, seconds and hemisphere N
or S) of the source of the interference.
- withSourceLat(Double) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the geographical latitude in decimal degrees.
- withSourceLocDescr(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the approximate position the source, if exact coordinates are not
known.
- withSourceLon(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the geographical longitude (degrees, minutes, seconds, and hemisphere E
or W) of the source of the interference.
- withSourceLon(Double) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the geographical longitude in decimal degrees.
- withSpectralPowerDensity(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxAntModeRef
-
Set the maximum spectral power density supplied to the input of the
antenna.
- withSpectrumLink(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set whether the transmitter(s) communicate or interact with the receiver(s)
in this Configuration, i.e.
- withSpeed(Double) - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Set the speed of the force element along a straight route or to the next
waypoint.
- withSpreadSpectrum(SpreadSpectrum) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the Spread Spectrum
- withSpreadSpectrum(SpreadSpectrum) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the Spread Spectrum
- withSpuriousLevel(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the maximum of all emission levels which occur outside the bandwidth of
the fundamental emission and not at a harmonic frequency.
- withSpuriousRejection(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the spurious receiver responses that arise when strong undesired
signals and the receiver local oscillator (LO) combine in the mixer to
produce a frequency on or near the intermediate frequency.
- withSSReply(SSReply...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withSSReply(Collection<SSReply>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withSSRequest(SSRequest...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withSSRequest(Collection<SSRequest>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withSsRequest(SSRequest) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the dataset identifier of the SSRequest being replied to.
- withSsRequest(SSRequest) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Set a Serial reference to a superseded or related SSRequest application.
- withSSRequestRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the dataset identifier of the SSRequest being replied to.
- withSSRequestRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Set a Serial reference to a superseded or related SSRequest application.
- withStage(Stage...) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the current stage of the system.
- withStage(Collection<Stage>) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the current stage of the system.
- withStageLocation(StageLocation...) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the StageLocation
- withStageLocation(Collection<StageLocation>) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the StageLocation
- withStageLocation(StageLocation...) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the StageLocation
- withStageLocation(Collection<StageLocation>) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the StageLocation
- withStageNum(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.FreqConversion
-
Set the position of the IF stage being described.
- withStandOffDist(Double) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the required distance from the jammer to non-threat equipment, in km.
- withStartDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the date upon which work will commence on this stage.
- withStartDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the date upon which work will commence on this stage.
- withStartDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the date/time stamp when to initiate the jamming, if "Date/Time" is
used in element StartTrigger.
- withStartDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the date/time stamp when to initiate the jamming, if "Date/Time" is
used in element StartTrigger.
- withStartDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the timestamp when the denial of spectrum use is planned to begin.
- withStartDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the timestamp when the denial of spectrum use is planned to begin.
- withStartLocation(Location) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the Location serial indicating the region associated with "Troops in
Region" or "Troops Not in Region", in attribute StartTrigger.
- withStartLocationRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
- withStartTrigger(ListUWF) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the type of trigger that indicates when it is time to start jamming.
- withState(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StatusLog
-
Set the action performed for this status log entry.
- withState(ListCSU) - Method in class us.gov.dod.standard.ssrf._3_1.Common
-
Set the state of the dataset.
- withStateCounty(String) - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Set the state or other sub-national political area.
- withStateCounty(String) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the state or other sub-national political area.
- withStation(Station...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the Station
- withStation(Collection<Station>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the Station
- withStationConfig(StationConfig...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set the StationConfig
- withStationConfig(Collection<StationConfig>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set the StationConfig
- withStationControl(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the operating unit that controls the station when different than the
assignment users.
- withStationID(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the unique identifier of one of the stations used by this Assignment at
this specific Station.
- withStationID(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set the unique identifier of one of the stations used by this Assignment at
this specific Station.
- withStationLoc(StationLoc...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the US:StationLoc
- withStationLoc(Collection<StationLoc>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set the US:StationLoc
- withStationName(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set a short descriptive name for the station.
- withStatisticalIndicator(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationValues
-
Set In Data Item StatisticalIndicator (US), indicate how this specific data
observation was collected (e.g., 95% of the observed values).
- withStatisticalIndicator(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedScanValues
-
Set In Data Item StatisticalIndicator (US), indicate how this specific data
observation was used (e.g., 95% of the observed values).
- withStatisticalIndicator(Double) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.ObservedERPValues
-
Set In Data Item StatisticalIndicator (US), indicate how this specific data
observation was used (e.g., 95% of the observed values).
- withStatisticalIndicator(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPValues
-
Set In Data Item StatisticalIndicator (US), indicate how this specific data
observation was collected (e.g., 95% of the observed values).
- withStatisticalIndicator(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedPulseValues
-
Set In Data Item StatisticalIndicator (US), indicate how this specific data
observation was collected (e.g., 95% of the observed values).
- withStatisticalIndicator(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFValues
-
Set In Data Item StatisticalIndicator (US), indicate how this specific data
observation was collected (e.g., 95% of the observed values).
- withStatus(ListUNT) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Set the status of the future, prior, or associated, Notation.
- withStatus(ListUNT) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Set the status of the future, prior, or associated, Notation.
- withStatus(ListCSU) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Set the status of the Deployment.
- withStatusChangeDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Set the timestamp when the prior, or associated, Notation achieved this
Status.
- withStatusChangeDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Set the timestamp when the prior, or associated, Notation achieved this
Status.
- withStatusLog(StatusLog...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:StatusLog
- withStatusLog(Collection<StatusLog>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the US:StatusLog
- withStatusLog(StatusLog...) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the US:StatusLog
- withStatusLog(Collection<StatusLog>) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the US:StatusLog
- withStnClass(ListUSC) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Usage
-
Set the station class, as defined by the appropriate Administration.
- withStnClass(StnClass...) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set the StnClass
- withStnClass(Collection<StnClass>) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set the StnClass
- withStockNum(String) - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.StockNum
-
Set the stock number of the system/equipment.
- withStockNum(StockNum...) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the US:StockNum
- withStockNum(Collection<StockNum>) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set the US:StockNum
- withStockNum(StockNum...) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the US:StockNum
- withStockNum(Collection<StockNum>) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the US:StockNum
- withStopDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the date/time stamp when to stop the jamming, if "Date/Time" is used in
element StopTrigger.
- withStopDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the date/time stamp when to stop the jamming, if "Date/Time" is used in
element StopTrigger.
- withStopDateTime(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the timestamp when the denial of spectrum use is planned to be halted.
- withStopDateTime(Date) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the timestamp when the denial of spectrum use is planned to be halted.
- withStopLocation(Location) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the Location serial indicating the region associated with "Troops in
Region" or "Troops Not in Region", in attribute StopTrigger.
- withStopLocationRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
- withStopTrigger(ListUWF) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the type of trigger that indicates when it is time to stop jamming.
- withStreet(String) - Method in class us.gov.dod.standard.ssrf._3_1.contact.Address
-
Set the street address.
- withStreet(String) - Method in class us.gov.dod.standard.ssrf._3_1.Location
-
Set the street address.
- withSubcarrierFreq(SubcarrierFreq...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the SubcarrierFreq
- withSubcarrierFreq(Collection<SubcarrierFreq>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the SubcarrierFreq
- withSubcarrierTone(SubcarrierTone...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Set the SubcarrierTone
- withSubcarrierTone(Collection<SubcarrierTone>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.SubcarrierFreq
-
Set the SubcarrierTone
- withSupplementaryDetails(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set amplifying information that would facilitate processing.
- withSupportabilityCode(ListCCD) - Method in class us.gov.dod.standard.ssrf._3_1.SSReply
-
Set the overall result of the national analysis.
- withSymbolSize(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxModulation
-
Set the number of bits in the symbols being generated.
- withSyncMethod(String) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set a description of the timing synchronisation method used by the timing
deconfliction protocol.
- withSysName(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.SysOfStation
-
Set the name of the system to which the frequency assignment belongs.
- withSysOfStation(SysOfStation...) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the SysofStation
- withSysOfStation(Collection<SysOfStation>) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the SysofStation
- withSysRelationEssential(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set
- withTAD(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Freq
-
Set the TAD associated to the assigned frequency.
- withTargetDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the date by which a usable version of the system is expected to be
available for testing or deployment.
- withTargetDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the date by which a usable version of the system is expected to be
available for testing or deployment.
- withTargetID(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingTarget
-
Set a unique (within the parent JammingPlan) numeric identifier to
distinguish one target from another.
- withTechniques(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set how many ramp techniques occur during the programmed frequency range
dwell time.
- withTelephoneFax(TelephoneFax...) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the TelephoneFax
- withTelephoneFax(Collection<TelephoneFax>) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the TelephoneFax
- withTelephoneFax(TelephoneFax...) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the TelephoneFax
- withTelephoneFax(Collection<TelephoneFax>) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the TelephoneFax
- withTelephoneFax(TelephoneFax...) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the TelephoneFax
- withTelephoneFax(Collection<TelephoneFax>) - Method in class us.gov.dod.standard.ssrf._3_1.Role
-
Set the TelephoneFax
- withTerminationDate(Calendar) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the date this stage is expected to terminate.
- withTerminationDate(Date) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the date this stage is expected to terminate.
- withTerrainElevation(Double) - Method in class us.gov.dod.standard.ssrf._3_1.location.Point
-
Set the elevation of the base of the transmitting antenna structure above
Mean Sea Level (MSL).
- withText(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Footnote
-
Set the textual specification of the footnote, band user or band
application.
- withThirdHarmonicLevel(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the out-of-band emission level at the frequency that is three times the
fundamental frequency.
- withThreat(String) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set a short description of the threat name or threat type.
- withTiltAngleAdaptiveDriverDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the condition which controls, or can be associated with, the signals
Tilt Angle variations.
- withTiltAngleAdaptiveRuleDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the rule which describes the signal Polarisation Tilt Angle variations.
- withTiltAngleContinuous(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set whether the tilt angle variations are Discrete or Continuous.
- withTiltAngleDuration(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the time duration for a complete dwell/group of pulses which all have
the same discrete Polarisation Tilt Angle value, or for a continuous wave
at a constant Polarisation Tilt Angle value.
- withTiltAngleExtremeMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the upper end of the range of Polarisation Tilt Angle values that
represent 100% of observed Tilt Angle values, from a statistical study of
the data set.
- withTiltAngleExtremeMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the lower end of the range of Polarisation Tilt Angle values that
represent 100% of observed Tilt Angle values, from a statistical study of
the data set.
- withTiltAngleMean(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the average Polarisation Tilt Angle value for a signal which changes
Polarisation Tilt Angle values on a non-patterned basis.
- withTiltAngleMedian(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the observed Polarisation Tilt Angle value that the signal most often
used, based on statistical study of the data set.
- withTiltAnglePatternPeriod(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the time duration for one complete cycle of a repeating Polarisation
Tilt Angle sequence
- withTiltAnglePatternType(ListUS7) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set In Data Item TiltAnglePatternType (US), indicate whether Tilt Angle is
unmodulated or Tilt Angle variations are Patterned, Non-Patterned, or
Adaptive.
- withTiltAngleRangeMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the highest discrete Polarisation Tilt Angle value found in a single
intercept that contains the complete Polarisation Tilt Angle
characteristics.
- withTiltAngleRangeMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the lowest discrete Polarisation Tilt Angle value found in a single
intercept that contains the complete Polarisation Tilt Angle
characteristics
- withTiltAngleRate(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the rate of change for Polarisation Tilt Angle variations expressed in
Polarisation Tilt Angle changes per unit of time.
- withTiltAngleSequenceDesc(String) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set a free text description of the sequence of Polarisation Tilt Angle
values.
- withTiltAngleStdDev(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the standard deviation of the data set used to calculate Polarisation
Tilt Angle Mean fields.
- withTiltAngleStep(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationAnalysis
-
Set the delta between the Most Probable Polarisation Tilt Angle values of
adjacent and discrete Polarisation Tilt Angle values.
- withTiltAngleValue(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedPolarisationValues
-
Set the observed Tilt Angle which provided the base data set used for
statistical study.
- withTime(Time...) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set if the system is used in a wartime environment.
- withTime(Collection<Time>) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set if the system is used in a wartime environment.
- withTimeHopNumSlots(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the number of time slots.
- withTimeHopPulsesPerDwell(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the number of pulses transmitted during each dwell.
- withTimingDeconflictionProtocol(TimingDeconflictionProtocol...) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the US:TimingDeconflictionProtocol
- withTimingDeconflictionProtocol(Collection<TimingDeconflictionProtocol>) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the US:TimingDeconflictionProtocol
- withTitle(String) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set an identifying name for this Allotment or Assignment.
- withTitle(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set an identifying name for this Allotment or Assignment.
- withTitle(String) - Method in class us.gov.dod.standard.ssrf._3_1.common.ClsDerived
-
Set the title of the source document.
- withTitle(String) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the full title of the document.
- withTitle(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the title of the Spectrum Supportability application.
- withTitle(String) - Method in class us.gov.dod.standard.ssrf._3_1.TOA
-
Set an identifying name for this Table of Allocations.
- withTitleRank(String) - Method in class us.gov.dod.standard.ssrf._3_1.Contact
-
Set the contact title or rank e.g., Ms, Col, etc.
- withTOA(TOA...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withTOA(Collection<TOA>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withTransmitter(Transmitter) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Set the serial of a Transmitter in this configuration.
- withTransmitter(Transmitter...) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withTransmitter(Collection<Transmitter>) - Method in class us.gov.dod.standard.ssrf._3_1.SchemaRoot
-
Set
- withTriggerOff(Double) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set the time that the jammer is off (listening).
- withTriggerOn(Double) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.TimingDeconflictionProtocol
-
Set the time that the jammer is on (jamming).
- withTrunking(Trunking) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the US:Trunking
- withTrunkingAssignment(TrunkingAssignment...) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the US:TrunkingAssignment
- withTrunkingAssignment(Collection<TrunkingAssignment>) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Trunking
-
Set the US:TrunkingAssignment
- withTSDF(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set
- withTSPR(String) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the telecommunications service priority applicable to a
spectrum-dependent radiocommunications system intended to be used in direct
support of a national emergency declared under Section 706 of the
Communications Act of 1934, as amended.
- withTSPR(String) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set the telecommunications service priority applicable to a
spectrum-dependent radiocommunications system intended to be used in direct
support of a national emergency declared under Section 706 of the
Communications Act of 1934, as amended.
- withTSPR(String) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the telecommunications service priority applicable to a
spectrum-dependent radiocommunications system intended to be used in direct
support of a national emergency declared under Section 706 of the
Communications Act of 1934, as amended.
- withTunability(ListCTU) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the tuning capability.
- withTunability(ListCTU) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the tuning capability.
- withTuning(Tuning...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set the Tuning
- withTuning(Collection<Tuning>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Link
-
Set the Tuning
- withTuningMethod(ListCTN) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxMode
-
Set the device or process used to tune the equipment through the RF
spectrum.
- withTuningMethod(ListCTN) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the device or process used to tune the equipment through the RF
spectrum.
- withTuningStep(Double) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.AllotFreq
-
Set the tuning increment.
- withTuningStep(Double) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Tuning
-
Set the tuning increment expressed of the requested frequency range.
- withTuningStep(Double) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.RxSignalTuning
-
Set the tuning increment.
- withTuningStep(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.ObservedRFAnalysis
-
Set the separation between the mean RF values of adjacent RFs in signal
with discrete RF channels.
- withTuningStep(Double) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxSignalTuning
-
Set the tuning increment.
- withTxAntModeRef(TxAntModeRef...) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Set the TxAntModeRef
- withTxAntModeRef(Collection<TxAntModeRef>) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Set the TxAntModeRef
- withTxDuration(String) - Method in class us.gov.dod.standard.ssrf._3_1.loadset.JammingChannelProfile
-
Set the amount of time that the equipment will emit a jamming signal, in in
(0-999) hours, (0-59) minutes, and (0-999,999,999) nanoseconds
(hhh.mm.sssssssss).
- withTxEndpointID(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.DiagramLine
-
Set the Endpoint ID at the originating (transmitting) endpoint of a line on
the diagram.
- withTxMode(TxMode...) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the TxMode
- withTxMode(Collection<TxMode>) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the TxMode
- withTxModeRef(TxModeRef...) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Set the TxModeRef
- withTxModeRef(Collection<TxModeRef>) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.TxRef
-
Set the TxModeRef
- withTxModulation(TxModulation...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the TxModulation
- withTxModulation(Collection<TxModulation>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the TxModulation
- withTxRef(TxRef...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the TxRef
- withTxRef(Collection<TxRef>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the TxRef
- withTxSignalTuning(TxSignalTuning...) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the TxSignalTuning
- withTxSignalTuning(Collection<TxSignalTuning>) - Method in class us.gov.dod.standard.ssrf._3_1.transmitter.TxMode
-
Set the TxSignalTuning
- withType(ListCCI) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.POCInformation
-
Set the function of the referenced Contact or Organisation within the
current dataset.
- withType(ListCPJ) - Method in class us.gov.dod.standard.ssrf._3_1.allotment.Project
-
Set the type of project.
- withType(ListCAP) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntPattern
-
Set the type of the pattern cut.
- withType(ListCTO) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.Nomenclature
-
Set the type of nomenclature (commercial, military, etc).
- withType(ListCAU) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.StationConfig
-
Set whether the StationConfig is acting as a transmitter, receiver or
transceiver.
- withType(String) - Method in class us.gov.dod.standard.ssrf._3_1.common.CaseNum
-
Set a text identifying the type of case number (national file, exercise
name, etc).
- withType(String) - Method in class us.gov.dod.standard.ssrf._3_1.contact.EMail
-
Set the type of network hosting the e-mail address.
- withType(String) - Method in class us.gov.dod.standard.ssrf._3_1.contact.TelephoneFax
-
Set the name of the network on which this number can be dialed (e.g., DSN,
IVSN, CORMORANT).
- withType(ListCRE) - Method in class us.gov.dod.standard.ssrf._3_1.ExternalReference
-
Set the type of information referenced by this external reference.
- withType(ListCFD) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the type of deployment.
- withType(String) - Method in class us.gov.dod.standard.ssrf._3_1.forceelement.StockNum
-
Set the type of stock number.
- withType(ListCFE) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set if the Force Element is a Unit or a Platform.
- withType(ListCEN) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Set the type of Notation.
- withType(ListCEN) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.NotationTimeline
-
Set the type of Notation.
- withType(ListCEN) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.PotentialVictims
-
Set the type of Notation.
- withType(ListCFT) - Method in class us.gov.dod.standard.ssrf._3_1.organisation.RelatedOrganisation
-
Set the type of relationship.
- withType(ListCTO) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set the type of relationship.
- withType(ListCCT) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Curve
-
Set a code defining the type of curve.
- withType(ListCIN) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Deployment
-
Set the type of deployment.
- withType(ListCSS) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.SpreadSpectrum
-
Set the type of spread spectrum system being used.
- withType(ListCEA) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.EarthStation
-
Set if this is a specific or typical earth station.
- withType(ListCDD) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.RelatedSupportability
-
Set the type of dependency between the current dataset and the referred
application.
- withType(ListCSG) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Stage
-
Set the stage.
- withType(ListCAV) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Variance
-
Set the type of variance.
- withTypeOfService(ListUTY) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the type of service or circuit involved.
- withUIC(String) - Method in class us.gov.dod.standard.ssrf._3_1.ForceElement
-
Set an organisational identifier that may be used to uniquely identify an
organisation in operational planning systems and other non-spectrum
information systems.
- withUIC(String) - Method in class us.gov.dod.standard.ssrf._3_1.Organisation
-
Set an organisational identifier that may be used to uniquely identify an
organisation in operational planning systems and other non-spectrum
information systems.
- withUsage(Usage...) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the Usage
- withUsage(Collection<Usage>) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Configuration
-
Set the Usage
- withUsageCode(ListUUC) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the usage and category of circuits.
- withUsageDescription(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.Time
-
Set a description of the total amount of time a system/equipment is
expected to be in operation.
- withUsageFrequency(ListUUF) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the general amount of time when the frequency assignment frequencies
will be either guarded (monitored) or used for transmission.
- withUsagePercentage(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the percentage of time the transmitter equipment is in use during the
scheduled hours of operation.
- withUsageType(ListCUT) - Method in class us.gov.dod.standard.ssrf._3_1.Allotment
-
Set the type of assignment request or approved assignment/allotment.
- withUsageType(ListCUT) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the type of assignment request or approved assignment or allotment.
- withUseIndicator(String) - Method in class us.gov.dod.standard.ssrf._3_1.toa.FreqBand
-
Set the permitted uses of this band (e.g., "Government", "Non-government",
etc).
- withUser(String) - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.Channel
-
Set a specific user of this channel in the channel plan.
- withUserCode(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.Station
-
Set a code identifying the user of the station.
- withUserNetCode(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set a unique code that identifies the specific user of the frequency, i.e.,
the command, activity, unit, project, etc.
- withUsingCountries(UsingCountries...) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the US:UsingCountries
- withUsingCountries(Collection<UsingCountries>) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the US:UsingCountries
- withUsingCountries(UsingCountries...) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Set the US:UsingCountries
- withUsingCountries(Collection<UsingCountries>) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.Notation
-
Set the US:UsingCountries
- withUsingCountries(UsingCountries...) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the US:UsingCountries
- withUsingCountries(Collection<UsingCountries>) - Method in class us.gov.dod.standard.ssrf._3_1.Receiver
-
Set the US:UsingCountries
- withUsingCountries(UsingCountries...) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the US:UsingCountries
- withUsingCountries(Collection<UsingCountries>) - Method in class us.gov.dod.standard.ssrf._3_1.RFSystem
-
Set the US:UsingCountries
- withUsingCountries(UsingCountries...) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the US:UsingCountries
- withUsingCountries(Collection<UsingCountries>) - Method in class us.gov.dod.standard.ssrf._3_1.Transmitter
-
Set the US:UsingCountries
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.administrative.Code
-
Set the unique code entry within the code list.
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.CircuitRemarks
-
Set a value that is most probably correct.
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DCSTrunk
-
Set a value that is most probably correct.
- withValue(ListUFN) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DetailedFunction
-
Set a value that is most probably correct.
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.DocketNum
-
Set a value that is most probably correct.
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.HostDocketNum
-
Set a value that is most probably correct.
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.assignment.OffTheShelfEquipment
-
Set a value that is most probably correct.
- withValue(BigDecimal) - Method in class us.gov.dod.standard.ssrf._3_1.channelplan.ChannelFreq
-
Set the frequency in the channel plan.
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.common.ExtReferenceRef
-
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.common.Remarks
-
Set a value that is most probably correct.
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.Serial
-
Sets the SSRF SERIAL number value.
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.domains.TString
-
Sets the value of the value property.
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.metadata.TSerial
-
Sets the SSRF SERIAL number value.
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.RxModeRef
-
Set a value that is most probably correct.
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.EmsClass
-
Set a value that is most probably correct.
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.receiver.Installation
-
Set a value that is most probably correct.
- withValue(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.satellite.ServiceArea
-
Set a value that is most probably correct.
- withValue(String) - Method in class us.gov.dod.standard.ssrf._3_1.ssreply.Comment
-
Set a value that is most probably correct.
- withValue(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.ssrequest.HostNation
-
Set a value that is most probably correct.
- withValue(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Administration
-
Set a value that is most probably correct.
- withValue(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Country
-
Set a value that is most probably correct.
- withValue(ListUSC) - Method in class us.gov.dod.standard.ssrf._3_1.toa.StnClass
-
Set a value that is most probably correct.
- withVariance(Variance...) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set the Variance
- withVariance(Collection<Variance>) - Method in class us.gov.dod.standard.ssrf._3_1.toa.Allocation
-
Set the Variance
- withVersion(String) - Method in class us.gov.dod.standard.ssrf._3_1.radiationplan.JammingPlan
-
Set the current version of the Jamming Plan.
- withVersion(String) - Method in class us.gov.dod.standard.ssrf._3_1.RadiationPlan
-
Set the current version of the Radiation Plan.
- withVertAperture(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the vertical cross-section of the antenna radiation pattern in the
direction of highest gain.
- withVertBwMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the maximum vertical beamwidth for beamwidths which vary with the
frequency.
- withVertBwMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the maximum angle of the vertical component of the antenna mainbeam
measured at the half-power (-3 dB) points of its maximum vertical width.
- withVertBwMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the minimum or nominal vertical beamwidth.
- withVertBwMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.ObservedLobeValues
-
Set the minimum angle of the vertical component of the antenna mainbeam
measured at the half-power (-3 dB) points of its maximum vertical width.
- withVertDimension(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the linear vertical dimension of the antenna.
- withVertScanAngleMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the maximum limit of the vertical arc scanned relative to the
horizontal.
- withVertScanAngleMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the minimum limit of the vertical arc scanned relative to the
horizontal.
- withVertScanRate(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the number of complete vertical scans per minute.
- withVertScanSpeed(Double) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the number of degrees of vertical scan per second.
- withVertScanType(ListCAS) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the antenna vertical scanning capability.
- withVertSidelobeAttenuation(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the attenuation of the sidelobe relative to the main beam gain.
- withVertSidelobeElev(Double) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set the first sidelobe in the vertical plane.
- withVertSidelobeSuppressed(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.Antenna
-
Set whether a portion of the radiation from an antenna outside of the main
beam has been suppressed or eliminated..
- withVictimAsgnRef(Serial) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
- withVictimAssignment(Assignment) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set In Data Item VictimAsgnRef, Enter the serial number of the assignment
victim of the interference.
- withVictimCountry(ListCAO) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the country or area where the victim of the interference is located.
- withVictimFreqMax(Double) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the upper frequency of the range, in case of an assignment over a
frequency range.
- withVictimFreqMin(Double) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the nominal or lower frequency used by the victim of the interference.
- withVictimLat(Double) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the geographical latitude in decimal degrees.
- withVictimLocDescr(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the approximate position the victim of the interference, if exact
coordinates are not known.
- withVictimLon(Double) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the geographical longitude in decimal degrees.
- withVictimName(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.PotentialVictims
-
Set the name or nomenclature of a system that may be negatively impacted by
the subject Notation/Signal.
- withVictimNotation(String) - Method in class us.gov.dod.standard.ssrf._3_1.multiple.PotentialVictims
-
Set the designator for a specific emitter that may be negatively impacted
by the subject Notation/Signal.
- withVictimSystem(String) - Method in class us.gov.dod.standard.ssrf._3_1.IntfReport
-
Set the nomenclature or other identifier of equipment experiencing the
interference.
- withVSWR(VSWR...) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the VSWR
- withVSWR(Collection<VSWR>) - Method in class us.gov.dod.standard.ssrf._3_1.antenna.AntMode
-
Set the VSWR
- withWartimeUse(ListCBO) - Method in class us.gov.dod.standard.ssrf._3_1.SSRequest
-
Set if the system is used in a wartime environment.
- withWaypointIdx(Integer) - Method in class us.gov.dod.standard.ssrf._3_1.fedeployment.AtWaypoint
-
Set the sequential index of a Point within the referenced Location.
- withYears(String) - Method in class us.gov.dod.standard.ssrf._3_1.Assignment
-
Set the 4-digit year [1900..2100] when the Assignment will be guarded
(monitored) or used for transmission.
- withYears(String) - Method in class us.gov.dod.standard.ssrf._3_1.FEDeployment
-
Set the 4-digit year [1900..2100] that the Force element is planned for
deployment.
- withYears(String) - Method in class us.gov.dod.standard.ssrf._3_1.jrfl.JRFLEntry
-
Set the 4-digit year [1900..2100].
- withYears(String) - Method in class us.gov.dod.standard.ssrf._3_1.JRFL
-
Set the 4-digit year [1900..2100].