us.gov.dod.standard.ssrf._3_1.transmitter

Class ObservedMOPAnalysis

java.lang.Object

us.gov.dod.standard.ssrf._3_1.transmitter.ObservedMOPAnalysis

public class ObservedMOPAnalysis
extends Object

ObservedMOPAnalysis (US) contains data describing the characteristic and pattern information for the Modulation impressed On the Pulse (MOP).

Element of TxMode

Sub-Element is ObservedMOPSweep

Example:

 <ObservedMOPAnalysis>
   <MOPAdaptiveDriverDesc cls="U">Target Motion Tracking</MOPAdaptiveDriverDesc>
   <MOPAdaptiveDriverRuleDesc cls="U">Target Motion Tracking</MOPAdaptiveDriverRuleDesc>
   <MOPAMPercentModulation cls="U">46.8</MOPAMPercentModulation>
   <MOPChangeRate cls="U">.034</MOPChangeRate>
   <MOPContinuous cls="U">Yes</MOPContinuous>
   <MOPID cls="U">67990</MOPID>
   <MOPMeanValue cls="U">23</MOPMeanValue>
   <MOPNumElements cls="U">672</MOPNumElements>
   <MOPNumElements cls="U">743</MOPNumElements>
   <MOPOffTime cls="U">590</MOPOffTime>
   <MOPOnTime cls="U">357</MOPOnTime>
   <MOPPatternName cls="U">Big View Sample 00067</MOPPatternName>
   <MOPPatternPeriod cls="U">0.0001</MOPPatternPeriod>
   <MOPPatternType cls="U">Non-Patterned</MOPPatternType>
   <MOPPulseDurationLink cls="U">0.001</MOPPulseDurationLink>
   <MOPTimeBWProduct cls="U">72.69</MOPTimeBWProduct>
   <MOPType cls="U">PM</MOPType>
   <MOPValueMax cls="U">16</MOPValueMax>
   <MOPValueMin cls="U">11</MOPValueMin>
   <SignalType cls="U">Doppler Frequency-Shift</SignalType>
   <ObservedMOPSweep>
     <MOPDutyCycle cls="U">99.2</MOPDutyCycle>
     <MOPFlyBackInterval cls="U">23678.23</MOPFlyBackInterval>
     <MOPNumElements cls="U">500</MOPNumElements>
     <MOPRepetionInterval cls="U">23693.23</MOPRepetionInterval>
     <MOPStep cls="U">32</MOPStep>
     <MOPSweepPeriod cls="U">0.04</MOPSweepPeriod>
     <ObservedMOPSequence cls="U"></ObservedMOPSequence>
     <MOPDutyCycle cls="U">12.5</MOPDutyCycle>
     <MOPNumElements cls="U">500</MOPNumElements>
     <MOPRepetionInterval cls="U">23691.23</MOPRepetionInterval>
     <MOPSequenceDesc cls="U">Required Pattern Collection set A34</MOPSequenceDesc>
     <MOPStep cls="U">34</MOPStep>
     <SequenceBitLength cls="U">432</SequenceBitLength>
     <ObservedMOPBits>
       <BitDuration cls="U">34.67</BitDuration>
       <BitRate cls="U">372</BitRate>
       <MOPDutyCycle cls="U">12.4</MOPDutyCycle>
       <MOPNumElements cls="U">492</MOPNumElements>
       <MOPRepetionInterval cls="U">23690.23</MOPRepetionInterval>
       <MOPStep cls="U">36</MOPStep>
       <ObservedMOPValues>
         <StatisticalIndicator cls="U">97</StatisticalIndicator>
         <MOPValueAM cls="U">35</MOPValueAM>
         <MOPValueCW cls="U">3024</MOPValueCW>
         <MOPValueFM cls="U">3096</MOPValueFM>
         <MOPValuePM cls="U">27</MOPValuePM>
       </ObservedMOPValues>
     </ObservedMOPBits>
   </ObservedMOPSequence>
 </ObservedMOPSweep>
 </ObservedMOPAnalysis>
 

Version:

3.1.0, 03/30/2015

Author:

Key Bridge LLC

Constructor Summary

Constructors

Constructor and Description
ObservedMOPAnalysis()

Method Summary

Modifier and Type	Method and Description
S500	getMOPAdaptiveDriverDesc() Get the condition which controls, or can be associated with, the signal MOP variations..
S500	getMOPAdaptiveDriverRuleDesc() Get the rule which describes the signal MOP variations..
US_Percent2	getMOPAMPercentModulation() Get the AM Percent Modulation is the ratio (expressed as a percentage) between the amplitude variation and the maximum amplitude.
US_MOPChgAm	getMOPChangeRateAM() Get In Data Item US:MOPChangeRateAM (US), enter the change in amplitude within the pulse.
US_MOPChgFm	getMOPChangeRateCW() Get In Data Item US:MOPChangeRateCW (US), enter the change in continuous wave frequency within the pulse.
US_MOPChgFm	getMOPChangeRateFM() Get In Data Item US:MOPChangeRateFM (US), enter the change in frequency within the pulse.
US_PhaseAngleRate	getMOPChangeRatePM() Get In Data Item US:MOPChangeRatePM (US), enter the change in phase angle within the pulse.
TString	getMOPContinuous() Get In Data Item US:MOPContinuous (US), indicate whether MOP or CW modulation is Discrete or Continuous..
S10	getMOPID() Get In Data Item US:MOPID (US), enter a unique identifier (within the TxMode) for the MOP data..
Signed_DB_5_2	getMOPMeanValueAM() Get In Data Item US:MOPMeanValueAM (US), enter the average amplitude for a signal which changes on a non-patterned basis within a pulse.
US_MOPFm	getMOPMeanValueCW() Get In Data Item US:MOPMeanValueCW (US), enter the average continuous wave frequency for a signal which changes on a non-patterned basis within a pulse.
US_MOPFm	getMOPMeanValueFM() Get In Data Item US:MOPMeanValue (US), enter the average frequency for a signal which changes on a non-patterned basis within a pulse.
US_PhaseAngle	getMOPMeanValuePM() Get In Data Item US:MOPMeanValue (US), enter the average phase angle for a signal which changes on a non-patterned basis within a pulse.
UN6	getMOPNumElements() Get In Data Item US:MOPNumElements (US), enter the number of discrete FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any repeated values are counted each time).
microsecs	getMOPOffTime() Get In Data Item US:MOPOffTime (US), enter the duration of the state of the modulated waveform with the absence of energy..
microsecs	getMOPOnTime() Get In Data Item US:MOPOnTime (US), enter the duration of the one on-time related to the binary form of amplitude modulation called on-off keying..
S50	getMOPPatternName() Get In Data Item MOPPatternName (US), enter a freeform text name for the pattern (e.g., Phase Alpha)..
microsecs	getMOPPatternPeriod() Get In Data Item US:MOPPatternPeriod (US), enter the duration of one complete cycle of Frequency, Phase or Amplitude variations for a signal which changes on a patterned basis, within a pulse, for pulsed signals..
TString	getMOPPatternType() Get In Data Item US:MOPPatternType (US), indicate whether MOP or CW characteristics are Patterned, Non-Patterned, Adaptive, or Unmodulated..
microsecs	getMOPPulseDurationLink() Get In Data Item US:MOPPulseDurationLink (US), enter the Discrete PD value which is associated with the selected MOP name (i.e., the name in the MOP Pattern List)..
US_UN16_9	getMOPTimeBWProduct() Get In Data Item US:MOPTimeBWProduct (US), enter the time-bandwidth product of the waveform (actual PD times instantaneous bandwidth)..
TString	getMOPType() Get In Data Item MOPType (US), indicate if the information imprinted on the pulse is modulated by amplitude (AM), frequency (FM), phase (PM), or is a continuous wave (CW)..
Signed_DB_5_2	getMOPValueMaxAM() Get In Data Item US:MOPValueMaxAM (US), enter the maximum change in amplitude within the pulse.
US_MOPFm	getMOPValueMaxCW() Get In Data Item US:MOPValueMaxCW (US), enter the maximum change in continuous wave frequency within the pulse.
US_MOPFm	getMOPValueMaxFM() Get In Data Item US:MOPValueMaxFM (US), enter the maximum change in frequency within the pulse.
US_PhaseAngle	getMOPValueMaxPM() Get In Data Item US:MOPValueMaxPM (US), enter the maximum change in phase angle within the pulse.
Signed_DB_5_2	getMOPValueMinAM() Get In Data Item US:MOPValueMinAM (US), enter the minimum change in amplitude within the pulse.
US_MOPFm	getMOPValueMinCW() Get In Data Item US:MOPValueMinCW (US), enter the minimum change in continuous wave frequency within the pulse.
US_MOPFm	getMOPValueMinFM() Get In Data Item US:MOPValueMinFM (US), enter the minimum change in frequency within the pulse.
US_PhaseAngle	getMOPValueMinPM() Get In Data Item US:MOPValueMinPM (US), enter the minimum change in phase angle within the pulse.
Set<ObservedMOPSweep>	getObservedMOPSweep() Get the US:ObservedMOPSweep
TString	getSignalType() Get In Data Item SignalType (US), indicate the specific type of modulation used/detected..
boolean	isSet() Determine if the required fields in this SSRF data type instance are set.
boolean	isSetMOPAdaptiveDriverDesc() Determine if the MOPAdaptiveDriverDesc is configured.
boolean	isSetMOPAdaptiveDriverRuleDesc() Determine if the MOPAdaptiveDriverRuleDesc is configured.
boolean	isSetMOPAMPercentModulation() Determine if the MOPAMPercentModulation is configured.
boolean	isSetMOPChangeRateAM() Determine if the MOPChangeRateAM is configured.
boolean	isSetMOPChangeRateCW() Determine if the MOPChangeRateCW is configured.
boolean	isSetMOPChangeRateFM() Determine if the MOPChangeRateFM is configured.
boolean	isSetMOPChangeRatePM() Determine if the MOPChangeRatePM is configured.
boolean	isSetMOPContinuous() Determine if the MOPContinuous is configured.
boolean	isSetMOPID() Determine if the MOPID is configured.
boolean	isSetMOPMeanValueAM() Determine if the MOPMeanValueAM is configured.
boolean	isSetMOPMeanValueCW() Determine if the MOPMeanValueCW is configured.
boolean	isSetMOPMeanValueFM() Determine if the MOPMeanValueFM is configured.
boolean	isSetMOPMeanValuePM() Determine if the MOPMeanValuePM is configured.
boolean	isSetMOPNumElements() Determine if the MOPNumElements is configured.
boolean	isSetMOPOffTime() Determine if the MOPOffTime is configured.
boolean	isSetMOPOnTime() Determine if the MOPOnTime is configured.
boolean	isSetMOPPatternName() Determine if the MOPPatternName is configured.
boolean	isSetMOPPatternPeriod() Determine if the MOPPatternPeriod is configured.
boolean	isSetMOPPatternType() Determine if the MOPPatternType is configured.
boolean	isSetMOPPulseDurationLink() Determine if the MOPPulseDurationLink is configured.
boolean	isSetMOPTimeBWProduct() Determine if the MOPTimeBWProduct is configured.
boolean	isSetMOPType() Determine if the MOPType is configured.
boolean	isSetMOPValueMaxAM() Determine if the MOPValueMaxAM is configured.
boolean	isSetMOPValueMaxCW() Determine if the MOPValueMaxCW is configured.
boolean	isSetMOPValueMaxFM() Determine if the MOPValueMaxFM is configured.
boolean	isSetMOPValueMaxPM() Determine if the MOPValueMaxPM is configured.
boolean	isSetMOPValueMinAM() Determine if the MOPValueMinAM is configured.
boolean	isSetMOPValueMinCW() Determine if the MOPValueMinCW is configured.
boolean	isSetMOPValueMinFM() Determine if the MOPValueMinFM is configured.
boolean	isSetMOPValueMinPM() Determine if the MOPValueMinPM is configured.
boolean	isSetObservedMOPSweep() Determine if the ObservedMOPSweep is configured.
boolean	isSetSignalType() Determine if the SignalType is configured.
void	setMOPAdaptiveDriverDesc(S500 value) Set the condition which controls, or can be associated with, the signal MOP variations..
void	setMOPAdaptiveDriverRuleDesc(S500 value) Set the rule which describes the signal MOP variations..
void	setMOPAMPercentModulation(US_Percent2 value) Set the AM Percent Modulation is the ratio (expressed as a percentage) between the amplitude variation and the maximum amplitude.
void	setMOPChangeRateAM(US_MOPChgAm value) Set In Data Item US:MOPChangeRateAM (US), enter the change in amplitude within the pulse.
void	setMOPChangeRateCW(US_MOPChgFm value) Set In Data Item US:MOPChangeRateCW (US), enter the change in continuous wave frequency within the pulse.
void	setMOPChangeRateFM(US_MOPChgFm value) Set In Data Item US:MOPChangeRateFM (US), enter the change in frequency within the pulse.
void	setMOPChangeRatePM(US_PhaseAngleRate value) Set In Data Item US:MOPChangeRatePM (US), enter the change in phase angle within the pulse.
void	setMOPContinuous(TString value) Set In Data Item US:MOPContinuous (US), indicate whether MOP or CW modulation is Discrete or Continuous..
void	setMOPID(S10 value) Set In Data Item US:MOPID (US), enter a unique identifier (within the TxMode) for the MOP data..
void	setMOPMeanValueAM(Signed_DB_5_2 value) Set In Data Item US:MOPMeanValueAM (US), enter the average amplitude for a signal which changes on a non-patterned basis within a pulse.
void	setMOPMeanValueCW(US_MOPFm value) Set In Data Item US:MOPMeanValueCW (US), enter the average continuous wave frequency for a signal which changes on a non-patterned basis within a pulse.
void	setMOPMeanValueFM(US_MOPFm value) Set In Data Item US:MOPMeanValue (US), enter the average frequency for a signal which changes on a non-patterned basis within a pulse.
void	setMOPMeanValuePM(US_PhaseAngle value) Set In Data Item US:MOPMeanValue (US), enter the average phase angle for a signal which changes on a non-patterned basis within a pulse.
void	setMOPNumElements(UN6 value) Set In Data Item US:MOPNumElements (US), enter the number of discrete FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any repeated values are counted each time).
void	setMOPOffTime(microsecs value) Set In Data Item US:MOPOffTime (US), enter the duration of the state of the modulated waveform with the absence of energy..
void	setMOPOnTime(microsecs value) Set In Data Item US:MOPOnTime (US), enter the duration of the one on-time related to the binary form of amplitude modulation called on-off keying..
void	setMOPPatternName(S50 value) Set In Data Item MOPPatternName (US), enter a freeform text name for the pattern (e.g., Phase Alpha)..
void	setMOPPatternPeriod(microsecs value) Set In Data Item US:MOPPatternPeriod (US), enter the duration of one complete cycle of Frequency, Phase or Amplitude variations for a signal which changes on a patterned basis, within a pulse, for pulsed signals..
void	setMOPPatternType(TString value) Set In Data Item US:MOPPatternType (US), indicate whether MOP or CW characteristics are Patterned, Non-Patterned, Adaptive, or Unmodulated..
void	setMOPPulseDurationLink(microsecs value) Set In Data Item US:MOPPulseDurationLink (US), enter the Discrete PD value which is associated with the selected MOP name (i.e., the name in the MOP Pattern List)..
void	setMOPTimeBWProduct(US_UN16_9 value) Set In Data Item US:MOPTimeBWProduct (US), enter the time-bandwidth product of the waveform (actual PD times instantaneous bandwidth)..
void	setMOPType(TString value) Set In Data Item MOPType (US), indicate if the information imprinted on the pulse is modulated by amplitude (AM), frequency (FM), phase (PM), or is a continuous wave (CW)..
void	setMOPValueMaxAM(Signed_DB_5_2 value) Set In Data Item US:MOPValueMaxAM (US), enter the maximum change in amplitude within the pulse.
void	setMOPValueMaxCW(US_MOPFm value) Set In Data Item US:MOPValueMaxCW (US), enter the maximum change in continuous wave frequency within the pulse.
void	setMOPValueMaxFM(US_MOPFm value) Set In Data Item US:MOPValueMaxFM (US), enter the maximum change in frequency within the pulse.
void	setMOPValueMaxPM(US_PhaseAngle value) Set In Data Item US:MOPValueMaxPM (US), enter the maximum change in phase angle within the pulse.
void	setMOPValueMinAM(Signed_DB_5_2 value) Set In Data Item US:MOPValueMinAM (US), enter the minimum change in amplitude within the pulse.
void	setMOPValueMinCW(US_MOPFm value) Set In Data Item US:MOPValueMinCW (US), enter the minimum change in continuous wave frequency within the pulse.
void	setMOPValueMinFM(US_MOPFm value) Set In Data Item US:MOPValueMinFM (US), enter the minimum change in frequency within the pulse.
void	setMOPValueMinPM(US_PhaseAngle value) Set In Data Item US:MOPValueMinPM (US), enter the minimum change in phase angle within the pulse.
void	setSignalType(TString value) Set In Data Item SignalType (US), indicate the specific type of modulation used/detected..
String	toString() Get a string representation of this ObservedMOPAnalysis instance configuration.
void	unsetObservedMOPSweep() Clear the ObservedMOPSweep field.
ObservedMOPAnalysis	withMOPAdaptiveDriverDesc(String value) Set the condition which controls, or can be associated with, the signal MOP variations.
ObservedMOPAnalysis	withMOPAdaptiveDriverRuleDesc(String value) Set the rule which describes the signal MOP variations.
ObservedMOPAnalysis	withMOPAMPercentModulation(Double value) Set the AM Percent Modulation is the ratio (expressed as a percentage) between the amplitude variation and the maximum amplitude
ObservedMOPAnalysis	withMOPChangeRateAM(Double value) Set In Data Item US:MOPChangeRateAM (US), enter the change in amplitude within the pulse.
ObservedMOPAnalysis	withMOPChangeRateCW(Double value) Set In Data Item US:MOPChangeRateCW (US), enter the change in continuous wave frequency within the pulse.
ObservedMOPAnalysis	withMOPChangeRateFM(Double value) Set In Data Item US:MOPChangeRateFM (US), enter the change in frequency within the pulse.
ObservedMOPAnalysis	withMOPChangeRatePM(Double value) Set In Data Item US:MOPChangeRatePM (US), enter the change in phase angle within the pulse.
ObservedMOPAnalysis	withMOPContinuous(ListCBO value) Set In Data Item US:MOPContinuous (US), indicate whether MOP or CW modulation is Discrete or Continuous.
ObservedMOPAnalysis	withMOPID(String value) Set In Data Item US:MOPID (US), enter a unique identifier (within the TxMode) for the MOP data.
ObservedMOPAnalysis	withMOPMeanValueAM(Double value) Set In Data Item US:MOPMeanValueAM (US), enter the average amplitude for a signal which changes on a non-patterned basis within a pulse.
ObservedMOPAnalysis	withMOPMeanValueCW(Double value) Set In Data Item US:MOPMeanValueCW (US), enter the average continuous wave frequency for a signal which changes on a non-patterned basis within a pulse.
ObservedMOPAnalysis	withMOPMeanValueFM(Double value) Set In Data Item US:MOPMeanValue (US), enter the average frequency for a signal which changes on a non-patterned basis within a pulse.
ObservedMOPAnalysis	withMOPMeanValuePM(Double value) Set In Data Item US:MOPMeanValue (US), enter the average phase angle for a signal which changes on a non-patterned basis within a pulse.
ObservedMOPAnalysis	withMOPNumElements(Integer value) Set In Data Item US:MOPNumElements (US), enter the number of discrete FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any repeated values are counted each time)
ObservedMOPAnalysis	withMOPOffTime(Double value) Set In Data Item US:MOPOffTime (US), enter the duration of the state of the modulated waveform with the absence of energy.
ObservedMOPAnalysis	withMOPOnTime(Double value) Set In Data Item US:MOPOnTime (US), enter the duration of the one on-time related to the binary form of amplitude modulation called on-off keying.
ObservedMOPAnalysis	withMOPPatternName(String value) Set In Data Item MOPPatternName (US), enter a freeform text name for the pattern (e.g., Phase Alpha).
ObservedMOPAnalysis	withMOPPatternPeriod(Double value) Set In Data Item US:MOPPatternPeriod (US), enter the duration of one complete cycle of Frequency, Phase or Amplitude variations for a signal which changes on a patterned basis, within a pulse, for pulsed signals.
ObservedMOPAnalysis	withMOPPatternType(ListUS7 value) Set In Data Item US:MOPPatternType (US), indicate whether MOP or CW characteristics are Patterned, Non-Patterned, Adaptive, or Unmodulated.
ObservedMOPAnalysis	withMOPPulseDurationLink(Double value) Set In Data Item US:MOPPulseDurationLink (US), enter the Discrete PD value which is associated with the selected MOP name (i.e., the name in the MOP Pattern List).
ObservedMOPAnalysis	withMOPTimeBWProduct(Double value) Set In Data Item US:MOPTimeBWProduct (US), enter the time-bandwidth product of the waveform (actual PD times instantaneous bandwidth).
ObservedMOPAnalysis	withMOPType(ListUSX value) Set In Data Item MOPType (US), indicate if the information imprinted on the pulse is modulated by amplitude (AM), frequency (FM), phase (PM), or is a continuous wave (CW).
ObservedMOPAnalysis	withMOPValueMaxAM(Double value) Set In Data Item US:MOPValueMaxAM (US), enter the maximum change in amplitude within the pulse.
ObservedMOPAnalysis	withMOPValueMaxCW(Double value) Set In Data Item US:MOPValueMaxCW (US), enter the maximum change in continuous wave frequency within the pulse.
ObservedMOPAnalysis	withMOPValueMaxFM(Double value) Set In Data Item US:MOPValueMaxFM (US), enter the maximum change in frequency within the pulse.
ObservedMOPAnalysis	withMOPValueMaxPM(Double value) Set In Data Item US:MOPValueMaxPM (US), enter the maximum change in phase angle within the pulse.
ObservedMOPAnalysis	withMOPValueMinAM(Double value) Set In Data Item US:MOPValueMinAM (US), enter the minimum change in amplitude within the pulse.
ObservedMOPAnalysis	withMOPValueMinCW(Double value) Set In Data Item US:MOPValueMinCW (US), enter the minimum change in continuous wave frequency within the pulse.
ObservedMOPAnalysis	withMOPValueMinFM(Double value) Set In Data Item US:MOPValueMinFM (US), enter the minimum change in frequency within the pulse.
ObservedMOPAnalysis	withMOPValueMinPM(Double value) Set In Data Item US:MOPValueMinPM (US), enter the minimum change in phase angle within the pulse.
ObservedMOPAnalysis	withObservedMOPSweep(Collection<ObservedMOPSweep> values) Set the US:ObservedMOPSweep
ObservedMOPAnalysis	withObservedMOPSweep(ObservedMOPSweep... values) Set the US:ObservedMOPSweep
ObservedMOPAnalysis	withSignalType(ListCMO value) Set In Data Item SignalType (US), indicate the specific type of modulation used/detected.

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Constructor Detail

ObservedMOPAnalysis

public ObservedMOPAnalysis()

Method Detail

getMOPAdaptiveDriverDesc

public S500 getMOPAdaptiveDriverDesc()

Get the condition which controls, or can be associated with, the signal MOP variations..

Returns:

a S500 instance

Since:

3.1.0

setMOPAdaptiveDriverDesc

public void setMOPAdaptiveDriverDesc(S500 value)

Set the condition which controls, or can be associated with, the signal MOP variations..

Parameters:

value - a S500 instance

Since:

3.1.0

isSetMOPAdaptiveDriverDesc

public boolean isSetMOPAdaptiveDriverDesc()

Determine if the MOPAdaptiveDriverDesc is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPAdaptiveDriverRuleDesc

public S500 getMOPAdaptiveDriverRuleDesc()

Get the rule which describes the signal MOP variations..

Returns:

a S500 instance

Since:

3.1.0

setMOPAdaptiveDriverRuleDesc

public void setMOPAdaptiveDriverRuleDesc(S500 value)

Set the rule which describes the signal MOP variations..

Parameters:

value - a S500 instance

Since:

3.1.0

isSetMOPAdaptiveDriverRuleDesc

public boolean isSetMOPAdaptiveDriverRuleDesc()

Determine if the MOPAdaptiveDriverRuleDesc is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPAMPercentModulation

public US_Percent2 getMOPAMPercentModulation()

Get the AM Percent Modulation is the ratio (expressed as a percentage) between the amplitude variation and the maximum amplitude.

Returns:

a US_Percent2 instance

Since:

3.1.0

setMOPAMPercentModulation

public void setMOPAMPercentModulation(US_Percent2 value)

Set the AM Percent Modulation is the ratio (expressed as a percentage) between the amplitude variation and the maximum amplitude.

Parameters:

value - a US_Percent2 instance

Since:

3.1.0

isSetMOPAMPercentModulation

public boolean isSetMOPAMPercentModulation()

Determine if the MOPAMPercentModulation is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPChangeRateAM

public US_MOPChgAm getMOPChangeRateAM()

Get In Data Item US:MOPChangeRateAM (US), enter the change in amplitude within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a US_MOPChgAm instance

Since:

3.1.0

setMOPChangeRateAM

public void setMOPChangeRateAM(US_MOPChgAm value)

Set In Data Item US:MOPChangeRateAM (US), enter the change in amplitude within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a US_MOPChgAm instance

Since:

3.1.0

isSetMOPChangeRateAM

public boolean isSetMOPChangeRateAM()

Determine if the MOPChangeRateAM is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPChangeRateCW

public US_MOPChgFm getMOPChangeRateCW()

Get In Data Item US:MOPChangeRateCW (US), enter the change in continuous wave frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a US_MOPChgFm instance

Since:

3.1.0

setMOPChangeRateCW

public void setMOPChangeRateCW(US_MOPChgFm value)

Set In Data Item US:MOPChangeRateCW (US), enter the change in continuous wave frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a US_MOPChgFm instance

Since:

3.1.0

isSetMOPChangeRateCW

public boolean isSetMOPChangeRateCW()

Determine if the MOPChangeRateCW is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPChangeRateFM

public US_MOPChgFm getMOPChangeRateFM()

Get In Data Item US:MOPChangeRateFM (US), enter the change in frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a US_MOPChgFm instance

Since:

3.1.0

setMOPChangeRateFM

public void setMOPChangeRateFM(US_MOPChgFm value)

Set In Data Item US:MOPChangeRateFM (US), enter the change in frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a US_MOPChgFm instance

Since:

3.1.0

isSetMOPChangeRateFM

public boolean isSetMOPChangeRateFM()

Determine if the MOPChangeRateFM is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPChangeRatePM

public US_PhaseAngleRate getMOPChangeRatePM()

Get In Data Item US:MOPChangeRatePM (US), enter the change in phase angle within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a US_PhaseAngleRate instance

Since:

3.1.0

setMOPChangeRatePM

public void setMOPChangeRatePM(US_PhaseAngleRate value)

Set In Data Item US:MOPChangeRatePM (US), enter the change in phase angle within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a US_PhaseAngleRate instance

Since:

3.1.0

isSetMOPChangeRatePM

public boolean isSetMOPChangeRatePM()

Determine if the MOPChangeRatePM is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPContinuous

public TString getMOPContinuous()

Get In Data Item US:MOPContinuous (US), indicate whether MOP or CW modulation is Discrete or Continuous..

Returns:

the MOPContinuous value in a TString data type

Since:

3.1.0

setMOPContinuous

public void setMOPContinuous(TString value)

Set In Data Item US:MOPContinuous (US), indicate whether MOP or CW modulation is Discrete or Continuous..

Parameters:

value - the MOPContinuous value in a TString data type

Since:

3.1.0

isSetMOPContinuous

public boolean isSetMOPContinuous()

Determine if the MOPContinuous is configured.

If configured this method also inspects the TString wrapped value.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPID

public S10 getMOPID()

Get In Data Item US:MOPID (US), enter a unique identifier (within the TxMode) for the MOP data..

Returns:

a S10 instance

Since:

3.1.0

setMOPID

public void setMOPID(S10 value)

Set In Data Item US:MOPID (US), enter a unique identifier (within the TxMode) for the MOP data..

Parameters:

value - a S10 instance

Since:

3.1.0

isSetMOPID

public boolean isSetMOPID()

Determine if the MOPID is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPMeanValueAM

public Signed_DB_5_2 getMOPMeanValueAM()

Get In Data Item US:MOPMeanValueAM (US), enter the average amplitude for a signal which changes on a non-patterned basis within a pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a Signed_DB_5_2 instance

Since:

3.1.0

setMOPMeanValueAM

public void setMOPMeanValueAM(Signed_DB_5_2 value)

Set In Data Item US:MOPMeanValueAM (US), enter the average amplitude for a signal which changes on a non-patterned basis within a pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a Signed_DB_5_2 instance

Since:

3.1.0

isSetMOPMeanValueAM

public boolean isSetMOPMeanValueAM()

Determine if the MOPMeanValueAM is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPMeanValueCW

public US_MOPFm getMOPMeanValueCW()

Get In Data Item US:MOPMeanValueCW (US), enter the average continuous wave frequency for a signal which changes on a non-patterned basis within a pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a US_MOPFm instance

Since:

3.1.0

setMOPMeanValueCW

public void setMOPMeanValueCW(US_MOPFm value)

Set In Data Item US:MOPMeanValueCW (US), enter the average continuous wave frequency for a signal which changes on a non-patterned basis within a pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a US_MOPFm instance

Since:

3.1.0

isSetMOPMeanValueCW

public boolean isSetMOPMeanValueCW()

Determine if the MOPMeanValueCW is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPMeanValueFM

public US_MOPFm getMOPMeanValueFM()

Get In Data Item US:MOPMeanValue (US), enter the average frequency for a signal which changes on a non-patterned basis within a pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a US_MOPFm instance

Since:

3.1.0

setMOPMeanValueFM

public void setMOPMeanValueFM(US_MOPFm value)

Set In Data Item US:MOPMeanValue (US), enter the average frequency for a signal which changes on a non-patterned basis within a pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a US_MOPFm instance

Since:

3.1.0

isSetMOPMeanValueFM

public boolean isSetMOPMeanValueFM()

Determine if the MOPMeanValueFM is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPMeanValuePM

public US_PhaseAngle getMOPMeanValuePM()

Get In Data Item US:MOPMeanValue (US), enter the average phase angle for a signal which changes on a non-patterned basis within a pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a US_PhaseAngle instance

Since:

3.1.0

setMOPMeanValuePM

public void setMOPMeanValuePM(US_PhaseAngle value)

Set In Data Item US:MOPMeanValue (US), enter the average phase angle for a signal which changes on a non-patterned basis within a pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a US_PhaseAngle instance

Since:

3.1.0

isSetMOPMeanValuePM

public boolean isSetMOPMeanValuePM()

Determine if the MOPMeanValuePM is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPNumElements

public UN6 getMOPNumElements()

Get In Data Item US:MOPNumElements (US), enter the number of discrete FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any repeated values are counted each time).

Returns:

a UN6 instance

Since:

3.1.0

setMOPNumElements

public void setMOPNumElements(UN6 value)

Set In Data Item US:MOPNumElements (US), enter the number of discrete FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any repeated values are counted each time).

Parameters:

value - a UN6 instance

Since:

3.1.0

isSetMOPNumElements

public boolean isSetMOPNumElements()

Determine if the MOPNumElements is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPOffTime

public microsecs getMOPOffTime()

Get In Data Item US:MOPOffTime (US), enter the duration of the state of the modulated waveform with the absence of energy..

Returns:

a microsecs instance

Since:

3.1.0

setMOPOffTime

public void setMOPOffTime(microsecs value)

Set In Data Item US:MOPOffTime (US), enter the duration of the state of the modulated waveform with the absence of energy..

Parameters:

value - a microsecs instance

Since:

3.1.0

isSetMOPOffTime

public boolean isSetMOPOffTime()

Determine if the MOPOffTime is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPOnTime

public microsecs getMOPOnTime()

Get In Data Item US:MOPOnTime (US), enter the duration of the one on-time related to the binary form of amplitude modulation called on-off keying..

Returns:

a microsecs instance

Since:

3.1.0

setMOPOnTime

public void setMOPOnTime(microsecs value)

Set In Data Item US:MOPOnTime (US), enter the duration of the one on-time related to the binary form of amplitude modulation called on-off keying..

Parameters:

value - a microsecs instance

Since:

3.1.0

isSetMOPOnTime

public boolean isSetMOPOnTime()

Determine if the MOPOnTime is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPPatternName

public S50 getMOPPatternName()

Get In Data Item MOPPatternName (US), enter a freeform text name for the pattern (e.g., Phase Alpha)..

Returns:

a S50 instance

Since:

3.1.0

setMOPPatternName

public void setMOPPatternName(S50 value)

Set In Data Item MOPPatternName (US), enter a freeform text name for the pattern (e.g., Phase Alpha)..

Parameters:

value - a S50 instance

Since:

3.1.0

isSetMOPPatternName

public boolean isSetMOPPatternName()

Determine if the MOPPatternName is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPPatternPeriod

public microsecs getMOPPatternPeriod()

Get In Data Item US:MOPPatternPeriod (US), enter the duration of one complete cycle of Frequency, Phase or Amplitude variations for a signal which changes on a patterned basis, within a pulse, for pulsed signals..

Returns:

a microsecs instance

Since:

3.1.0

setMOPPatternPeriod

public void setMOPPatternPeriod(microsecs value)

Set In Data Item US:MOPPatternPeriod (US), enter the duration of one complete cycle of Frequency, Phase or Amplitude variations for a signal which changes on a patterned basis, within a pulse, for pulsed signals..

Parameters:

value - a microsecs instance

Since:

3.1.0

isSetMOPPatternPeriod

public boolean isSetMOPPatternPeriod()

Determine if the MOPPatternPeriod is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPPatternType

public TString getMOPPatternType()

Get In Data Item US:MOPPatternType (US), indicate whether MOP or CW characteristics are Patterned, Non-Patterned, Adaptive, or Unmodulated..

Returns:

the MOPPatternType value in a TString data type

Since:

3.1.0

setMOPPatternType

public void setMOPPatternType(TString value)

Set In Data Item US:MOPPatternType (US), indicate whether MOP or CW characteristics are Patterned, Non-Patterned, Adaptive, or Unmodulated..

Parameters:

value - the MOPPatternType value in a TString data type

Since:

3.1.0

isSetMOPPatternType

public boolean isSetMOPPatternType()

Determine if the MOPPatternType is configured.

If configured this method also inspects the TString wrapped value.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPPulseDurationLink

public microsecs getMOPPulseDurationLink()

Get In Data Item US:MOPPulseDurationLink (US), enter the Discrete PD value which is associated with the selected MOP name (i.e., the name in the MOP Pattern List)..

Returns:

a microsecs instance

Since:

3.1.0

setMOPPulseDurationLink

public void setMOPPulseDurationLink(microsecs value)

Set In Data Item US:MOPPulseDurationLink (US), enter the Discrete PD value which is associated with the selected MOP name (i.e., the name in the MOP Pattern List)..

Parameters:

value - a microsecs instance

Since:

3.1.0

isSetMOPPulseDurationLink

public boolean isSetMOPPulseDurationLink()

Determine if the MOPPulseDurationLink is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPTimeBWProduct

public US_UN16_9 getMOPTimeBWProduct()

Get In Data Item US:MOPTimeBWProduct (US), enter the time-bandwidth product of the waveform (actual PD times instantaneous bandwidth)..

Returns:

a US_UN16_9 instance

Since:

3.1.0

setMOPTimeBWProduct

public void setMOPTimeBWProduct(US_UN16_9 value)

Set In Data Item US:MOPTimeBWProduct (US), enter the time-bandwidth product of the waveform (actual PD times instantaneous bandwidth)..

Parameters:

value - a US_UN16_9 instance

Since:

3.1.0

isSetMOPTimeBWProduct

public boolean isSetMOPTimeBWProduct()

Determine if the MOPTimeBWProduct is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPType

public TString getMOPType()

Get In Data Item MOPType (US), indicate if the information imprinted on the pulse is modulated by amplitude (AM), frequency (FM), phase (PM), or is a continuous wave (CW)..

Returns:

the MOPType value in a TString data type

Since:

3.1.0

setMOPType

public void setMOPType(TString value)

Set In Data Item MOPType (US), indicate if the information imprinted on the pulse is modulated by amplitude (AM), frequency (FM), phase (PM), or is a continuous wave (CW)..

Parameters:

value - the MOPType value in a TString data type

Since:

3.1.0

isSetMOPType

public boolean isSetMOPType()

Determine if the MOPType is configured.

If configured this method also inspects the TString wrapped value.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPValueMaxAM

public Signed_DB_5_2 getMOPValueMaxAM()

Get In Data Item US:MOPValueMaxAM (US), enter the maximum change in amplitude within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a Signed_DB_5_2 instance

Since:

3.1.0

setMOPValueMaxAM

public void setMOPValueMaxAM(Signed_DB_5_2 value)

Set In Data Item US:MOPValueMaxAM (US), enter the maximum change in amplitude within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a Signed_DB_5_2 instance

Since:

3.1.0

isSetMOPValueMaxAM

public boolean isSetMOPValueMaxAM()

Determine if the MOPValueMaxAM is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPValueMaxCW

public US_MOPFm getMOPValueMaxCW()

Get In Data Item US:MOPValueMaxCW (US), enter the maximum change in continuous wave frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a US_MOPFm instance

Since:

3.1.0

setMOPValueMaxCW

public void setMOPValueMaxCW(US_MOPFm value)

Set In Data Item US:MOPValueMaxCW (US), enter the maximum change in continuous wave frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a US_MOPFm instance

Since:

3.1.0

isSetMOPValueMaxCW

public boolean isSetMOPValueMaxCW()

Determine if the MOPValueMaxCW is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPValueMaxFM

public US_MOPFm getMOPValueMaxFM()

Get In Data Item US:MOPValueMaxFM (US), enter the maximum change in frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a US_MOPFm instance

Since:

3.1.0

setMOPValueMaxFM

public void setMOPValueMaxFM(US_MOPFm value)

Set In Data Item US:MOPValueMaxFM (US), enter the maximum change in frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a US_MOPFm instance

Since:

3.1.0

isSetMOPValueMaxFM

public boolean isSetMOPValueMaxFM()

Determine if the MOPValueMaxFM is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPValueMaxPM

public US_PhaseAngle getMOPValueMaxPM()

Get In Data Item US:MOPValueMaxPM (US), enter the maximum change in phase angle within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a US_PhaseAngle instance

Since:

3.1.0

setMOPValueMaxPM

public void setMOPValueMaxPM(US_PhaseAngle value)

Set In Data Item US:MOPValueMaxPM (US), enter the maximum change in phase angle within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a US_PhaseAngle instance

Since:

3.1.0

isSetMOPValueMaxPM

public boolean isSetMOPValueMaxPM()

Determine if the MOPValueMaxPM is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPValueMinAM

public Signed_DB_5_2 getMOPValueMinAM()

Get In Data Item US:MOPValueMinAM (US), enter the minimum change in amplitude within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a Signed_DB_5_2 instance

Since:

3.1.0

setMOPValueMinAM

public void setMOPValueMinAM(Signed_DB_5_2 value)

Set In Data Item US:MOPValueMinAM (US), enter the minimum change in amplitude within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a Signed_DB_5_2 instance

Since:

3.1.0

isSetMOPValueMinAM

public boolean isSetMOPValueMinAM()

Determine if the MOPValueMinAM is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPValueMinCW

public US_MOPFm getMOPValueMinCW()

Get In Data Item US:MOPValueMinCW (US), enter the minimum change in continuous wave frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a US_MOPFm instance

Since:

3.1.0

setMOPValueMinCW

public void setMOPValueMinCW(US_MOPFm value)

Set In Data Item US:MOPValueMinCW (US), enter the minimum change in continuous wave frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a US_MOPFm instance

Since:

3.1.0

isSetMOPValueMinCW

public boolean isSetMOPValueMinCW()

Determine if the MOPValueMinCW is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPValueMinFM

public US_MOPFm getMOPValueMinFM()

Get In Data Item US:MOPValueMinFM (US), enter the minimum change in frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a US_MOPFm instance

Since:

3.1.0

setMOPValueMinFM

public void setMOPValueMinFM(US_MOPFm value)

Set In Data Item US:MOPValueMinFM (US), enter the minimum change in frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a US_MOPFm instance

Since:

3.1.0

isSetMOPValueMinFM

public boolean isSetMOPValueMinFM()

Determine if the MOPValueMinFM is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getMOPValueMinPM

public US_PhaseAngle getMOPValueMinPM()

Get In Data Item US:MOPValueMinPM (US), enter the minimum change in phase angle within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Returns:

a US_PhaseAngle instance

Since:

3.1.0

setMOPValueMinPM

public void setMOPValueMinPM(US_PhaseAngle value)

Set In Data Item US:MOPValueMinPM (US), enter the minimum change in phase angle within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType..

Parameters:

value - a US_PhaseAngle instance

Since:

3.1.0

isSetMOPValueMinPM

public boolean isSetMOPValueMinPM()

Determine if the MOPValueMinPM is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

getSignalType

public TString getSignalType()

Get In Data Item SignalType (US), indicate the specific type of modulation used/detected..

Returns:

the SignalType value in a TString data type

Since:

3.1.0

setSignalType

public void setSignalType(TString value)

Set In Data Item SignalType (US), indicate the specific type of modulation used/detected..

Parameters:

value - the SignalType value in a TString data type

Since:

3.1.0

isSetSignalType

public boolean isSetSignalType()

Determine if the SignalType is configured.

If configured this method also inspects the TString wrapped value.

Returns:

TRUE if the field is set, FALSE if the field is null

getObservedMOPSweep

public Set<ObservedMOPSweep> getObservedMOPSweep()

Get the US:ObservedMOPSweep

Complex element ObservedMOPSweep (US) contains data describing the parametric information for the period of the Modulation on the Pulse sweep..

Returns:

a ObservedMOPSweep instance

Since:

3.1.0

isSetObservedMOPSweep

public boolean isSetObservedMOPSweep()

Determine if the ObservedMOPSweep is configured.

Returns:

TRUE if the field is set, FALSE if the field is null

unsetObservedMOPSweep

public void unsetObservedMOPSweep()

Clear the ObservedMOPSweep field. This sets the field to null.

withMOPAdaptiveDriverDesc

public ObservedMOPAnalysis withMOPAdaptiveDriverDesc(String value)

Set the condition which controls, or can be associated with, the signal MOP variations.

Parameters:

value - An instances of type String.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPAdaptiveDriverRuleDesc

public ObservedMOPAnalysis withMOPAdaptiveDriverRuleDesc(String value)

Set the rule which describes the signal MOP variations.

Parameters:

value - An instances of type String.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPAMPercentModulation

public ObservedMOPAnalysis withMOPAMPercentModulation(Double value)

Set the AM Percent Modulation is the ratio (expressed as a percentage) between the amplitude variation and the maximum amplitude

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPChangeRateAM

public ObservedMOPAnalysis withMOPChangeRateAM(Double value)

Set In Data Item US:MOPChangeRateAM (US), enter the change in amplitude within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPChangeRateCW

public ObservedMOPAnalysis withMOPChangeRateCW(Double value)

Set In Data Item US:MOPChangeRateCW (US), enter the change in continuous wave frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPChangeRateFM

public ObservedMOPAnalysis withMOPChangeRateFM(Double value)

Set In Data Item US:MOPChangeRateFM (US), enter the change in frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPChangeRatePM

public ObservedMOPAnalysis withMOPChangeRatePM(Double value)

Set In Data Item US:MOPChangeRatePM (US), enter the change in phase angle within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPContinuous

public ObservedMOPAnalysis withMOPContinuous(ListCBO value)

Set In Data Item US:MOPContinuous (US), indicate whether MOP or CW modulation is Discrete or Continuous.

Parameters:

value - An instances of type ListCBO.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPID

public ObservedMOPAnalysis withMOPID(String value)

Set In Data Item US:MOPID (US), enter a unique identifier (within the TxMode) for the MOP data.

Parameters:

value - An instances of type String.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPMeanValueAM

public ObservedMOPAnalysis withMOPMeanValueAM(Double value)

Set In Data Item US:MOPMeanValueAM (US), enter the average amplitude for a signal which changes on a non-patterned basis within a pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPMeanValueCW

public ObservedMOPAnalysis withMOPMeanValueCW(Double value)

Set In Data Item US:MOPMeanValueCW (US), enter the average continuous wave frequency for a signal which changes on a non-patterned basis within a pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPMeanValueFM

public ObservedMOPAnalysis withMOPMeanValueFM(Double value)

Set In Data Item US:MOPMeanValue (US), enter the average frequency for a signal which changes on a non-patterned basis within a pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPMeanValuePM

public ObservedMOPAnalysis withMOPMeanValuePM(Double value)

Set In Data Item US:MOPMeanValue (US), enter the average phase angle for a signal which changes on a non-patterned basis within a pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPNumElements

public ObservedMOPAnalysis withMOPNumElements(Integer value)

Set In Data Item US:MOPNumElements (US), enter the number of discrete FREQ/PHASE/AMP values transmitted in a patterned sequence (i.e., any repeated values are counted each time)

Parameters:

value - An instances of type Integer.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPOffTime

public ObservedMOPAnalysis withMOPOffTime(Double value)

Set In Data Item US:MOPOffTime (US), enter the duration of the state of the modulated waveform with the absence of energy.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPOnTime

public ObservedMOPAnalysis withMOPOnTime(Double value)

Set In Data Item US:MOPOnTime (US), enter the duration of the one on-time related to the binary form of amplitude modulation called on-off keying.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPPatternName

public ObservedMOPAnalysis withMOPPatternName(String value)

Set In Data Item MOPPatternName (US), enter a freeform text name for the pattern (e.g., Phase Alpha).

Parameters:

value - An instances of type String.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPPatternPeriod

public ObservedMOPAnalysis withMOPPatternPeriod(Double value)

Set In Data Item US:MOPPatternPeriod (US), enter the duration of one complete cycle of Frequency, Phase or Amplitude variations for a signal which changes on a patterned basis, within a pulse, for pulsed signals.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPPatternType

public ObservedMOPAnalysis withMOPPatternType(ListUS7 value)

Set In Data Item US:MOPPatternType (US), indicate whether MOP or CW characteristics are Patterned, Non-Patterned, Adaptive, or Unmodulated.

Parameters:

value - An instances of type ListUS7.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPPulseDurationLink

public ObservedMOPAnalysis withMOPPulseDurationLink(Double value)

Set In Data Item US:MOPPulseDurationLink (US), enter the Discrete PD value which is associated with the selected MOP name (i.e., the name in the MOP Pattern List).

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPTimeBWProduct

public ObservedMOPAnalysis withMOPTimeBWProduct(Double value)

Set In Data Item US:MOPTimeBWProduct (US), enter the time-bandwidth product of the waveform (actual PD times instantaneous bandwidth).

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPType

public ObservedMOPAnalysis withMOPType(ListUSX value)

Set In Data Item MOPType (US), indicate if the information imprinted on the pulse is modulated by amplitude (AM), frequency (FM), phase (PM), or is a continuous wave (CW).

Parameters:

value - An instances of type ListUSX.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPValueMaxAM

public ObservedMOPAnalysis withMOPValueMaxAM(Double value)

Set In Data Item US:MOPValueMaxAM (US), enter the maximum change in amplitude within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPValueMaxCW

public ObservedMOPAnalysis withMOPValueMaxCW(Double value)

Set In Data Item US:MOPValueMaxCW (US), enter the maximum change in continuous wave frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPValueMaxFM

public ObservedMOPAnalysis withMOPValueMaxFM(Double value)

Set In Data Item US:MOPValueMaxFM (US), enter the maximum change in frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPValueMaxPM

public ObservedMOPAnalysis withMOPValueMaxPM(Double value)

Set In Data Item US:MOPValueMaxPM (US), enter the maximum change in phase angle within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPValueMinAM

public ObservedMOPAnalysis withMOPValueMinAM(Double value)

Set In Data Item US:MOPValueMinAM (US), enter the minimum change in amplitude within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPValueMinCW

public ObservedMOPAnalysis withMOPValueMinCW(Double value)

Set In Data Item US:MOPValueMinCW (US), enter the minimum change in continuous wave frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPValueMinFM

public ObservedMOPAnalysis withMOPValueMinFM(Double value)

Set In Data Item US:MOPValueMinFM (US), enter the minimum change in frequency within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withMOPValueMinPM

public ObservedMOPAnalysis withMOPValueMinPM(Double value)

Set In Data Item US:MOPValueMinPM (US), enter the minimum change in phase angle within the pulse. Use of this element should agree with the selection made in US:ObservedMOPAnalysis.MOPType.

Parameters:

value - An instances of type Double.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withSignalType

public ObservedMOPAnalysis withSignalType(ListCMO value)

Set In Data Item SignalType (US), indicate the specific type of modulation used/detected.

Parameters:

value - An instances of type ListCMO.

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withObservedMOPSweep

public ObservedMOPAnalysis withObservedMOPSweep(ObservedMOPSweep... values)

Set the US:ObservedMOPSweep

Complex element ObservedMOPSweep (US) contains data describing the parametric information for the period of the Modulation on the Pulse sweep.

Parameters:

values - One or more instances of type ObservedMOPSweep....

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

withObservedMOPSweep

public ObservedMOPAnalysis withObservedMOPSweep(Collection<ObservedMOPSweep> values)

Set the US:ObservedMOPSweep

Complex element ObservedMOPSweep (US) contains data describing the parametric information for the period of the Modulation on the Pulse sweep.

Parameters:

values - A collection of ObservedMOPSweep instances

Returns:

The current ObservedMOPAnalysis object instance.

Since:

3.1.0

toString

public String toString()

Get a string representation of this ObservedMOPAnalysis instance configuration.

Overrides:

toString in class Object

Returns:

The current object instance configuration as a non-null String

isSet

public boolean isSet()

Determine if the required fields in this SSRF data type instance are set.

ObservedMOPAnalysis has no configuration requirements.

Returns:

TRUE