public class ObservedPulseAnalysis extends Object
Element of TxMode
Sub-Element is ObservedPulseValues
Example:
<ObservedPulseAnalysis> <FallTime cls="U">.015</FallTime> <NumPDPositions cls="U">869</NumPDPositions> <NumPDValues cls="U">568</NumPDValues> <NumPRIElements cls="U">355</NumPRIElements> <NumPRIPositions cls="U">298</NumPRIPositions> <PDAdaptiveRuleDesc cls="U">Required Pattern Collection</PDAdaptiveRuleDesc> <PDContinuous cls="U">Yes</PDContinuous> <PDDwellMax cls="U">99.54</PDDwellMax> <PDDwellMin cls="U">65.43</PDDwellMin> <PDExtremeMax cls="U">6809</PDExtremeMax> <PDExtremeMin cls="U">6723</PDExtremeMin> <PDMax cls="U">6709</PDMax> <PDMean cls="U">6623</PDMean> <PDMedian cls="U">6690</PDMedian> <PDMin cls="U">6601</PDMin> <PDPatternPeriod cls="U">0.001</PDPatternPeriod> <PDPatternType cls="U">Non-Patterned</PDPatternType> <PDSequenceDesc cls="U">Required Pattern Collection set A34</PDSequenceDesc> <PDStdDev cls="U">276</PDStdDev> <PDStep cls="U">23</PDStep> <PDTypicalMax cls="U">698</PDTypicalMax> <PDTypicalMin cls="U">378</PDTypicalMin> <PRFChangeRate cls="U">3000</PRFChangeRate> <PRFExtremeMax cls="U">3129</PRFExtremeMax> <PRFExtremeMin cls="U">2790</PRFExtremeMin> <PRFMax cls="U">3102</PRFMax> <PRFMin cls="U">2703</PRFMin> <PRFTypicalMax cls="U">3019</PRFTypicalMax> <PRFTypicalMin cls="U">2783</PRFTypicalMin> <PRIAdaptiveDriverDesc cls="U">Target Motion Tracking</PRIAdaptiveDriverDesc> <PRIAdaptiveRuleDesc cls="U">Required Pattern Collection</PRIAdaptiveRuleDesc> <PRIAnomalousValues cls="U">Ground clutter introduced distortion</PRIAnomalousValues> <PRIBasicClockPeriod cls="U">0.00001</PRIBasicClockPeriod> <PRIChangeRate cls="U">376</PRIChangeRate> <PRIContinuous cls="U">Yes</PRIContinuous> <PRICountdown cls="U">678</PRICountdown> <PRICountdownKey cls="U">342</PRICountdownKey> <PRIExtremeMax cls="U">200</PRIExtremeMax> <PRIExtremeMin cls="U">900</PRIExtremeMin> <PRIFramePeriod cls="U">0.001</PRIFramePeriod> <PRIFrameRate cls="U">500</PRIFrameRate> <PRIGroupPulseSpacing cls="U">2890</PRIGroupPulseSpacing> <PRIGroupSpacing cls="U">2581</PRIGroupSpacing> <PRIMean cls="U">500</PRIMean> <PRIMedian cls="U">472</PRIMedian> <PRIMedianCountdowns cls="U">6890</PRIMedianCountdowns> <PRIPatternPeriod cls="U">23</PRIPatternPeriod> <PRIPatternType cls="U">Non-Patterned</PRIPatternType> <PRIPulsesPerGroup cls="U">2386</PRIPulsesPerGroup> <PRISequenceDesc cls="U">Required Pattern Collection set A34</PRISequenceDesc> <PRIStability cls="U">0.0001</PRIStability> <PRIStabilitySamplePeriod cls="U">0.12</PRIStabilitySamplePeriod> <PRIStdDev cls="U">.0145</PRIStdDev> <PRIStep cls="U">23</PRIStep> <PRISubframePeriod cls="U">0.001</PRISubframePeriod> <PRISubframeRate cls="U">300</PRISubframeRate> <PRITimingShift cls="U">238</PRITimingShift> <PRITypicalMax cls="U">293</PRITypicalMax> <PRITypicalMin cls="U">587</PRITypicalMin> <RiseTime cls="U">.015</RiseTime> <ObservedPulseValues> <ObservedPDValue cls="U">573</ObservedPDValue> <ObservedPRFValue cls="U">512</ObservedPRFValue> <ObservedPRIValue cls="U">512</ObservedPRIValue> <StatisticalIndicator cls="U">97.2</StatisticalIndicator> </ObservedPulseValues> </ObservedPulseAnalysis>
Constructor and Description |
---|
ObservedPulseAnalysis() |
Modifier and Type | Method and Description |
---|---|
microsecs |
getFallTime()
Get the time required for a pulse to fall from 90% to 10 percent of the
mean peak amplitude of its voltage waveform/envelope..
|
UN6 |
getNumPDPositions()
Get the number of pulses (i.e., positions) in a repeating sequence of
pulses which has multiple (2 or more) PD values..
|
UN6 |
getNumPDValues()
Get the number of discrete PD values (i.e., elements) in a repeating
sequence of pulses which has multiple (2 or more) PD values..
|
UN6 |
getNumPRIElements()
Get the number of discrete PRI values in a repeating sequence of discrete
PRIs..
|
UN6 |
getNumPRIPositions()
Get the number of time intervals between pulses or pulse groups, or the
number of PRI dwell groups, in a repeating PRI sequence which uses discrete
PRI values..
|
Set<ObservedPulseValues> |
getObservedPulseValues()
Get the US:ObservedPulseValues
|
S500 |
getPDAdaptiveRuleDesc()
Get the rule which describes the signal PD variations (aka.
|
TString |
getPDContinuous()
Get In Data Item PDContinuous (US), indicate whether pulse-to-pulse PD
variations are Discrete or Continuous.
|
microsecs |
getPDDwellMax()
Get the maximum time duration for a complete dwell/group of pulses which
all have the same PD value.
|
microsecs |
getPDDwellMin()
Get the minimum time duration for a complete dwell/group of pulses which
all have the same PD value..
|
microsecs |
getPDExtremeMax()
Get the maximum PD value that represents 100% of observed values.
|
microsecs |
getPDExtremeMin()
Get the minimum PD value that represents 100% of observed values..
|
microsecs |
getPDMax()
Get the highest discrete PD value in a repeating sequence of pulses which
has multiple PD values
|
microsecs |
getPDMean()
Get the average PD of a signal which changes PD values on a non-patterned
basis..
|
microsecs |
getPDMedian()
Get the PD value that the signal most often used, based on a statistical
study..
|
microsecs |
getPDMin()
Get the delta lowest discrete PD value in a repeating sequence of pulses
which has multiple PD values.
|
microsecs |
getPDPatternPeriod()
Get the time duration for one complete cycle of a repeating sequence of
pulses which has multiple (2 or more) PD values; the time duration shall go
from a point in one cycle to a like point in the next cycle..
|
TString |
getPDPatternType()
Get In Data Item PDPatternType (US), Indicate whether PD is unmodulated or
pulse-to-pulse PD variations are Patterned, Non-Patterned, or Adaptive..
|
S500 |
getPDSequenceDesc()
Get a freetext description of the PD Sequence..
|
microsecs |
getPDStdDev()
Get the standard deviation of the data sample used to calculate PD Mean..
|
microsecs |
getPDStep()
Get the Step between adjacent PD values; pertains to discrete PD
variations..
|
microsecs |
getPDTypicalMax()
Get the upper end of the range of PD values that represents 95% of observed
values, from a statistical study.
|
microsecs |
getPDTypicalMin()
Get the lower end of the range of PD values that represents 95% of observed
values, from a statistical study.
|
US_PRIChgRate |
getPRFChangeRate()
Get the rate of change for PD variations expressed as PD change per unit of
time..
|
US_PPS |
getPRFExtremeMax()
Get the minimum Observed PRF in the signal sample.
|
US_PPS |
getPRFExtremeMin()
Get the minimum Observed PRF in the signal sample..
|
US_PPS |
getPRFMax()
Get the highest discrete PRI value (convert PRI to PRF) which are found in
a single intercept that contains the complete PRI characteristics for that
specific data set.
|
US_PPS |
getPRFMin()
Get the lowest discrete PRI value (convert PRI to PRF) which are found in a
single intercept that contains the complete PRI characteristics for that
specific data set.
|
US_PPS |
getPRFTypicalMax()
Get the upper end of the range of PRF values that represents 95% of
observed values, from a statistical study.
|
US_PPS |
getPRFTypicalMin()
Get the lower end of the range of PRF values that represents 95% of
observed values, from a statistical study.
|
S500 |
getPRIAdaptiveDriverDesc()
Get the condition which controls or can be associated with the signal PRI
variations (aka, interpulse modulation changes)..
|
S500 |
getPRIAdaptiveRuleDesc()
Get the rule which describes the signal PRI variations (aka, interpulse
modulation changes).
|
S500 |
getPRIAnomalousValues()
Get any regularly occurring signal values which do not fit in any of the
other PRI related fields.
|
microsecs |
getPRIBasicClockPeriod()
Get the fundamental period of the emitter clock which is used to generate
the subject signal PRIs.
|
US_PRIChgRate |
getPRIChangeRate()
Get the PRI change per unit of time, measured over a significant portion of
the waveform.
|
TString |
getPRIContinuous()
Get In Data Item PRIContinuous (US), Indicate whether pulse-to-pulse PRI
variations are Discrete or Continuous.
|
UN6 |
getPRICountdown()
Get the integer (aka, count or countdown) associated with the PRI Crystal
value to provide the Pattern Period..
|
UN9 |
getPRICountdownKey()
Get the integer (aka, count or countdown) used to generate the PRI from the
PRI Crystal value..
|
microsecs |
getPRIExtremeMax()
Get the maximum observed PRI value, from a statistical study of a 100% data
set.
|
microsecs |
getPRIExtremeMin()
Get the minimum observed PRI value, from a statistical study of a 100% data
set..
|
microsecs |
getPRIFramePeriod()
Get the time difference between a point on the leading edge of the frame
marker (or an alternate pulse in the frame), to the similar point on the
leading edge of the frame marker (or the alternate pulse) in the
next/consecutive frame..
|
FreqM |
getPRIFrameRate()
Get the rate of frame generation during the Pulse Repetition Interval.
|
microsecs |
getPRIGroupPulseSpacing()
Get the time difference between a point on the leading edge of the subframe
marker (or an alternate pulse in the subframe), to the similar point on the
leading edge of the subframe marker (or the alternate pulse in the
subframe) in the next/consecutive frame..
|
microsecs |
getPRIGroupSpacing()
Get the PRI between two groups of pulses which both have constant but
different PRIs (aka, the PRI between consecutive PRI dwell groups)..
|
microsecs |
getPRIMean()
Get the average PRI value for a signal which changes PRI values on a
non-patterned basis..
|
microsecs |
getPRIMedian()
Get the observed PRI value that the signal most often used based on
statistical study of a data set..
|
S100 |
getPRIMedianCountdowns()
Get the observed PRI Crystal Counts used to generate the PRIs used most
often by the signal, based on statistical study of a data set..
|
microsecs |
getPRIPatternPeriod()
Get the time duration for one complete cycle of a repeating PRI sequence..
|
TString |
getPRIPatternType()
Get whether the PRI is unmodulated or pulse-to-pulse PRI variations are
Patterned, Non-Patterned, or Adaptive..
|
UN6 |
getPRIPulsesPerGroup()
Get the number of pulses in a pulse group..
|
S500 |
getPRISequenceDesc()
Get a free text description of the PRI Sequence..
|
US_PPM |
getPRIStability()
Get the variation of a mean PRI value measured from one time to another
time.
|
microsecs |
getPRIStabilitySamplePeriod()
Get the time interval used to determine the PRI stability value..
|
microsecs |
getPRIStdDev()
Get the standard deviation associated with the data set used to calculate
the values entered in the PRI Mean fields.
|
microsecs |
getPRIStep()
Get the delta between the Most Probable observed PRI values of adjacent and
discrete PRI..
|
microsecs |
getPRISubframePeriod()
Get the time difference between a point on the leading edge of the subframe
marker (or an alternate pulse in the subframe), to the similar point on the
leading edge of the subframe marker (or the alternate pulse in the
subframe) in the next/consecutive frame..
|
FreqM |
getPRISubframeRate()
Get the number of subframes detected during each PRI Subframe period..
|
microsecs |
getPRITimingShift()
Get the PRI timing shift value, on Emitters with repeated timing shifts of
a predictable magnitude, but not predictable timing..
|
microsecs |
getPRITypicalMax()
Get the upper end of the range of PRI values that represent 95% of the
signal observed PRI values, from a statistical study of a data set.
|
microsecs |
getPRITypicalMin()
Get the lower end of the range of PRI values that represent 95% of the
signal observed PRI values, from a statistical study of a data set..
|
microsecs |
getRiseTime()
Get the time required for a pulse to rise from 10% to 90 percent of the
mean peak amplitude of the voltage pattern..
|
boolean |
isSet()
Determine if the required fields in this SSRF data type instance are set.
|
boolean |
isSetFallTime()
Determine if the FallTime is configured.
|
boolean |
isSetNumPDPositions()
Determine if the NumPDPositions is configured.
|
boolean |
isSetNumPDValues()
Determine if the NumPDValues is configured.
|
boolean |
isSetNumPRIElements()
Determine if the NumPRIElements is configured.
|
boolean |
isSetNumPRIPositions()
Determine if the NumPRIPositions is configured.
|
boolean |
isSetObservedPulseValues()
Determine if the ObservedPulseValues is configured.
|
boolean |
isSetPDAdaptiveRuleDesc()
Determine if the PDAdaptiveRuleDesc is configured.
|
boolean |
isSetPDContinuous()
Determine if the PDContinuous is configured.
|
boolean |
isSetPDDwellMax()
Determine if the PDDwellMax is configured.
|
boolean |
isSetPDDwellMin()
Determine if the PDDwellMin is configured.
|
boolean |
isSetPDExtremeMax()
Determine if the PDExtremeMax is configured.
|
boolean |
isSetPDExtremeMin()
Determine if the PDExtremeMin is configured.
|
boolean |
isSetPDMax()
Determine if the PDMax is configured.
|
boolean |
isSetPDMean()
Determine if the PDMean is configured.
|
boolean |
isSetPDMedian()
Determine if the PDMedian is configured.
|
boolean |
isSetPDMin()
Determine if the PDMin is configured.
|
boolean |
isSetPDPatternPeriod()
Determine if the PDPatternPeriod is configured.
|
boolean |
isSetPDPatternType()
Determine if the PDPatternType is configured.
|
boolean |
isSetPDSequenceDesc()
Determine if the PDSequenceDesc is configured.
|
boolean |
isSetPDStdDev()
Determine if the PDStdDev is configured.
|
boolean |
isSetPDStep()
Determine if the PDStep is configured.
|
boolean |
isSetPDTypicalMax()
Determine if the PDTypicalMax is configured.
|
boolean |
isSetPDTypicalMin()
Determine if the PDTypicalMin is configured.
|
boolean |
isSetPRFChangeRate()
Determine if the PRFChangeRate is configured.
|
boolean |
isSetPRFExtremeMax()
Determine if the PRFExtremeMax is configured.
|
boolean |
isSetPRFExtremeMin()
Determine if the PRFExtremeMin is configured.
|
boolean |
isSetPRFMax()
Determine if the PRFMax is configured.
|
boolean |
isSetPRFMin()
Determine if the PRFMin is configured.
|
boolean |
isSetPRFTypicalMax()
Determine if the PRFTypicalMax is configured.
|
boolean |
isSetPRFTypicalMin()
Determine if the PRFTypicalMin is configured.
|
boolean |
isSetPRIAdaptiveDriverDesc()
Determine if the PRIAdaptiveDriverDesc is configured.
|
boolean |
isSetPRIAdaptiveRuleDesc()
Determine if the PRIAdaptiveRuleDesc is configured.
|
boolean |
isSetPRIAnomalousValues()
Determine if the PRIAnomalousValues is configured.
|
boolean |
isSetPRIBasicClockPeriod()
Determine if the PRIBasicClockPeriod is configured.
|
boolean |
isSetPRIChangeRate()
Determine if the PRIChangeRate is configured.
|
boolean |
isSetPRIContinuous()
Determine if the PRIContinuous is configured.
|
boolean |
isSetPRICountdown()
Determine if the PRICountdown is configured.
|
boolean |
isSetPRICountdownKey()
Determine if the PRICountdownKey is configured.
|
boolean |
isSetPRIExtremeMax()
Determine if the PRIExtremeMax is configured.
|
boolean |
isSetPRIExtremeMin()
Determine if the PRIExtremeMin is configured.
|
boolean |
isSetPRIFramePeriod()
Determine if the PRIFramePeriod is configured.
|
boolean |
isSetPRIFrameRate()
Determine if the PRIFrameRate is configured.
|
boolean |
isSetPRIGroupPulseSpacing()
Determine if the PRIGroupPulseSpacing is configured.
|
boolean |
isSetPRIGroupSpacing()
Determine if the PRIGroupSpacing is configured.
|
boolean |
isSetPRIMean()
Determine if the PRIMean is configured.
|
boolean |
isSetPRIMedian()
Determine if the PRIMedian is configured.
|
boolean |
isSetPRIMedianCountdowns()
Determine if the PRIMedianCountdowns is configured.
|
boolean |
isSetPRIPatternPeriod()
Determine if the PRIPatternPeriod is configured.
|
boolean |
isSetPRIPatternType()
Determine if the PRIPatternType is configured.
|
boolean |
isSetPRIPulsesPerGroup()
Determine if the PRIPulsesPerGroup is configured.
|
boolean |
isSetPRISequenceDesc()
Determine if the PRISequenceDesc is configured.
|
boolean |
isSetPRIStability()
Determine if the PRIStability is configured.
|
boolean |
isSetPRIStabilitySamplePeriod()
Determine if the PRIStabilitySamplePeriod is configured.
|
boolean |
isSetPRIStdDev()
Determine if the PRIStdDev is configured.
|
boolean |
isSetPRIStep()
Determine if the PRIStep is configured.
|
boolean |
isSetPRISubframePeriod()
Determine if the PRISubframePeriod is configured.
|
boolean |
isSetPRISubframeRate()
Determine if the PRISubframeRate is configured.
|
boolean |
isSetPRITimingShift()
Determine if the PRITimingShift is configured.
|
boolean |
isSetPRITypicalMax()
Determine if the PRITypicalMax is configured.
|
boolean |
isSetPRITypicalMin()
Determine if the PRITypicalMin is configured.
|
boolean |
isSetRiseTime()
Determine if the RiseTime is configured.
|
void |
setFallTime(microsecs value)
Set the time required for a pulse to fall from 90% to 10 percent of the
mean peak amplitude of its voltage waveform/envelope..
|
void |
setNumPDPositions(UN6 value)
Set the number of pulses (i.e., positions) in a repeating sequence of
pulses which has multiple (2 or more) PD values..
|
void |
setNumPDValues(UN6 value)
Set the number of discrete PD values (i.e., elements) in a repeating
sequence of pulses which has multiple (2 or more) PD values..
|
void |
setNumPRIElements(UN6 value)
Set the number of discrete PRI values in a repeating sequence of discrete
PRIs..
|
void |
setNumPRIPositions(UN6 value)
Set the number of time intervals between pulses or pulse groups, or the
number of PRI dwell groups, in a repeating PRI sequence which uses discrete
PRI values..
|
void |
setPDAdaptiveRuleDesc(S500 value)
Set the rule which describes the signal PD variations (aka.
|
void |
setPDContinuous(TString value)
Set In Data Item PDContinuous (US), indicate whether pulse-to-pulse PD
variations are Discrete or Continuous.
|
void |
setPDDwellMax(microsecs value)
Set the maximum time duration for a complete dwell/group of pulses which
all have the same PD value.
|
void |
setPDDwellMin(microsecs value)
Set the minimum time duration for a complete dwell/group of pulses which
all have the same PD value..
|
void |
setPDExtremeMax(microsecs value)
Set the maximum PD value that represents 100% of observed values.
|
void |
setPDExtremeMin(microsecs value)
Set the minimum PD value that represents 100% of observed values..
|
void |
setPDMax(microsecs value)
Set the highest discrete PD value in a repeating sequence of pulses which
has multiple PD values
|
void |
setPDMean(microsecs value)
Set the average PD of a signal which changes PD values on a non-patterned
basis..
|
void |
setPDMedian(microsecs value)
Set the PD value that the signal most often used, based on a statistical
study..
|
void |
setPDMin(microsecs value)
Set the delta lowest discrete PD value in a repeating sequence of pulses
which has multiple PD values.
|
void |
setPDPatternPeriod(microsecs value)
Set the time duration for one complete cycle of a repeating sequence of
pulses which has multiple (2 or more) PD values; the time duration shall go
from a point in one cycle to a like point in the next cycle..
|
void |
setPDPatternType(TString value)
Set In Data Item PDPatternType (US), Indicate whether PD is unmodulated or
pulse-to-pulse PD variations are Patterned, Non-Patterned, or Adaptive..
|
void |
setPDSequenceDesc(S500 value)
Set a freetext description of the PD Sequence..
|
void |
setPDStdDev(microsecs value)
Set the standard deviation of the data sample used to calculate PD Mean..
|
void |
setPDStep(microsecs value)
Set the Step between adjacent PD values; pertains to discrete PD
variations..
|
void |
setPDTypicalMax(microsecs value)
Set the upper end of the range of PD values that represents 95% of observed
values, from a statistical study.
|
void |
setPDTypicalMin(microsecs value)
Set the lower end of the range of PD values that represents 95% of observed
values, from a statistical study.
|
void |
setPRFChangeRate(US_PRIChgRate value)
Set the rate of change for PD variations expressed as PD change per unit of
time..
|
void |
setPRFExtremeMax(US_PPS value)
Set the minimum Observed PRF in the signal sample.
|
void |
setPRFExtremeMin(US_PPS value)
Set the minimum Observed PRF in the signal sample..
|
void |
setPRFMax(US_PPS value)
Set the highest discrete PRI value (convert PRI to PRF) which are found in
a single intercept that contains the complete PRI characteristics for that
specific data set.
|
void |
setPRFMin(US_PPS value)
Set the lowest discrete PRI value (convert PRI to PRF) which are found in a
single intercept that contains the complete PRI characteristics for that
specific data set.
|
void |
setPRFTypicalMax(US_PPS value)
Set the upper end of the range of PRF values that represents 95% of
observed values, from a statistical study.
|
void |
setPRFTypicalMin(US_PPS value)
Set the lower end of the range of PRF values that represents 95% of
observed values, from a statistical study.
|
void |
setPRIAdaptiveDriverDesc(S500 value)
Set the condition which controls or can be associated with the signal PRI
variations (aka, interpulse modulation changes)..
|
void |
setPRIAdaptiveRuleDesc(S500 value)
Set the rule which describes the signal PRI variations (aka, interpulse
modulation changes).
|
void |
setPRIAnomalousValues(S500 value)
Set any regularly occurring signal values which do not fit in any of the
other PRI related fields.
|
void |
setPRIBasicClockPeriod(microsecs value)
Set the fundamental period of the emitter clock which is used to generate
the subject signal PRIs.
|
void |
setPRIChangeRate(US_PRIChgRate value)
Set the PRI change per unit of time, measured over a significant portion of
the waveform.
|
void |
setPRIContinuous(TString value)
Set In Data Item PRIContinuous (US), Indicate whether pulse-to-pulse PRI
variations are Discrete or Continuous.
|
void |
setPRICountdown(UN6 value)
Set the integer (aka, count or countdown) associated with the PRI Crystal
value to provide the Pattern Period..
|
void |
setPRICountdownKey(UN9 value)
Set the integer (aka, count or countdown) used to generate the PRI from the
PRI Crystal value..
|
void |
setPRIExtremeMax(microsecs value)
Set the maximum observed PRI value, from a statistical study of a 100% data
set.
|
void |
setPRIExtremeMin(microsecs value)
Set the minimum observed PRI value, from a statistical study of a 100% data
set..
|
void |
setPRIFramePeriod(microsecs value)
Set the time difference between a point on the leading edge of the frame
marker (or an alternate pulse in the frame), to the similar point on the
leading edge of the frame marker (or the alternate pulse) in the
next/consecutive frame..
|
void |
setPRIFrameRate(FreqM value)
Set the rate of frame generation during the Pulse Repetition Interval.
|
void |
setPRIGroupPulseSpacing(microsecs value)
Set the time difference between a point on the leading edge of the subframe
marker (or an alternate pulse in the subframe), to the similar point on the
leading edge of the subframe marker (or the alternate pulse in the
subframe) in the next/consecutive frame..
|
void |
setPRIGroupSpacing(microsecs value)
Set the PRI between two groups of pulses which both have constant but
different PRIs (aka, the PRI between consecutive PRI dwell groups)..
|
void |
setPRIMean(microsecs value)
Set the average PRI value for a signal which changes PRI values on a
non-patterned basis..
|
void |
setPRIMedian(microsecs value)
Set the observed PRI value that the signal most often used based on
statistical study of a data set..
|
void |
setPRIMedianCountdowns(S100 value)
Set the observed PRI Crystal Counts used to generate the PRIs used most
often by the signal, based on statistical study of a data set..
|
void |
setPRIPatternPeriod(microsecs value)
Set the time duration for one complete cycle of a repeating PRI sequence..
|
void |
setPRIPatternType(TString value)
Set whether the PRI is unmodulated or pulse-to-pulse PRI variations are
Patterned, Non-Patterned, or Adaptive..
|
void |
setPRIPulsesPerGroup(UN6 value)
Set the number of pulses in a pulse group..
|
void |
setPRISequenceDesc(S500 value)
Set a free text description of the PRI Sequence..
|
void |
setPRIStability(US_PPM value)
Set the variation of a mean PRI value measured from one time to another
time.
|
void |
setPRIStabilitySamplePeriod(microsecs value)
Set the time interval used to determine the PRI stability value..
|
void |
setPRIStdDev(microsecs value)
Set the standard deviation associated with the data set used to calculate
the values entered in the PRI Mean fields.
|
void |
setPRIStep(microsecs value)
Set the delta between the Most Probable observed PRI values of adjacent and
discrete PRI..
|
void |
setPRISubframePeriod(microsecs value)
Set the time difference between a point on the leading edge of the subframe
marker (or an alternate pulse in the subframe), to the similar point on the
leading edge of the subframe marker (or the alternate pulse in the
subframe) in the next/consecutive frame..
|
void |
setPRISubframeRate(FreqM value)
Set the number of subframes detected during each PRI Subframe period..
|
void |
setPRITimingShift(microsecs value)
Set the PRI timing shift value, on Emitters with repeated timing shifts of
a predictable magnitude, but not predictable timing..
|
void |
setPRITypicalMax(microsecs value)
Set the upper end of the range of PRI values that represent 95% of the
signal observed PRI values, from a statistical study of a data set.
|
void |
setPRITypicalMin(microsecs value)
Set the lower end of the range of PRI values that represent 95% of the
signal observed PRI values, from a statistical study of a data set..
|
void |
setRiseTime(microsecs value)
Set the time required for a pulse to rise from 10% to 90 percent of the
mean peak amplitude of the voltage pattern..
|
String |
toString()
Get a string representation of this ObservedPulseAnalysis instance
configuration.
|
void |
unsetObservedPulseValues()
Clear the ObservedPulseValues field.
|
ObservedPulseAnalysis |
withFallTime(Double value)
Set the time required for a pulse to fall from 90% to 10 percent of the
mean peak amplitude of its voltage waveform/envelope.
|
ObservedPulseAnalysis |
withNumPDPositions(Integer value)
Set the number of pulses (i.e., positions) in a repeating sequence of
pulses which has multiple (2 or more) PD values.
|
ObservedPulseAnalysis |
withNumPDValues(Integer value)
Set the number of discrete PD values (i.e., elements) in a repeating
sequence of pulses which has multiple (2 or more) PD values.
|
ObservedPulseAnalysis |
withNumPRIElements(Integer value)
Set the number of discrete PRI values in a repeating sequence of discrete
PRIs.
|
ObservedPulseAnalysis |
withNumPRIPositions(Integer value)
Set the number of time intervals between pulses or pulse groups, or the
number of PRI dwell groups, in a repeating PRI sequence which uses discrete
PRI values.
|
ObservedPulseAnalysis |
withObservedPulseValues(Collection<ObservedPulseValues> values)
Set the US:ObservedPulseValues
|
ObservedPulseAnalysis |
withObservedPulseValues(ObservedPulseValues... values)
Set the US:ObservedPulseValues
|
ObservedPulseAnalysis |
withPDAdaptiveRuleDesc(String value)
Set the rule which describes the signal PD variations (aka.
|
ObservedPulseAnalysis |
withPDContinuous(ListCBO value)
Set In Data Item PDContinuous (US), indicate whether pulse-to-pulse PD
variations are Discrete or Continuous.
|
ObservedPulseAnalysis |
withPDDwellMax(Double value)
Set the maximum time duration for a complete dwell/group of pulses which
all have the same PD value.
|
ObservedPulseAnalysis |
withPDDwellMin(Double value)
Set the minimum time duration for a complete dwell/group of pulses which
all have the same PD value.
|
ObservedPulseAnalysis |
withPDExtremeMax(Double value)
Set the maximum PD value that represents 100% of observed values.
|
ObservedPulseAnalysis |
withPDExtremeMin(Double value)
Set the minimum PD value that represents 100% of observed values.
|
ObservedPulseAnalysis |
withPDMax(Double value)
Set the highest discrete PD value in a repeating sequence of pulses which
has multiple PD values
|
ObservedPulseAnalysis |
withPDMean(Double value)
Set the average PD of a signal which changes PD values on a non-patterned
basis.
|
ObservedPulseAnalysis |
withPDMedian(Double value)
Set the PD value that the signal most often used, based on a statistical
study.
|
ObservedPulseAnalysis |
withPDMin(Double value)
Set the delta lowest discrete PD value in a repeating sequence of pulses
which has multiple PD values
|
ObservedPulseAnalysis |
withPDPatternPeriod(Double value)
Set the time duration for one complete cycle of a repeating sequence of
pulses which has multiple (2 or more) PD values; the time duration shall go
from a point in one cycle to a like point in the next cycle.
|
ObservedPulseAnalysis |
withPDPatternType(ListUS7 value)
Set In Data Item PDPatternType (US), Indicate whether PD is unmodulated or
pulse-to-pulse PD variations are Patterned, Non-Patterned, or Adaptive.
|
ObservedPulseAnalysis |
withPDSequenceDesc(String value)
Set a freetext description of the PD Sequence.
|
ObservedPulseAnalysis |
withPDStdDev(Double value)
Set the standard deviation of the data sample used to calculate PD Mean.
|
ObservedPulseAnalysis |
withPDStep(Double value)
Set the Step between adjacent PD values; pertains to discrete PD
variations.
|
ObservedPulseAnalysis |
withPDTypicalMax(Double value)
Set the upper end of the range of PD values that represents 95% of observed
values, from a statistical study.
|
ObservedPulseAnalysis |
withPDTypicalMin(Double value)
Set the lower end of the range of PD values that represents 95% of observed
values, from a statistical study
|
ObservedPulseAnalysis |
withPRFChangeRate(Double value)
Set the rate of change for PD variations expressed as PD change per unit of
time.
|
ObservedPulseAnalysis |
withPRFExtremeMax(Double value)
Set the minimum Observed PRF in the signal sample.
|
ObservedPulseAnalysis |
withPRFExtremeMin(Double value)
Set the minimum Observed PRF in the signal sample.
|
ObservedPulseAnalysis |
withPRFMax(Double value)
Set the highest discrete PRI value (convert PRI to PRF) which are found in
a single intercept that contains the complete PRI characteristics for that
specific data set.
|
ObservedPulseAnalysis |
withPRFMin(Double value)
Set the lowest discrete PRI value (convert PRI to PRF) which are found in a
single intercept that contains the complete PRI characteristics for that
specific data set.
|
ObservedPulseAnalysis |
withPRFTypicalMax(Double value)
Set the upper end of the range of PRF values that represents 95% of
observed values, from a statistical study.
|
ObservedPulseAnalysis |
withPRFTypicalMin(Double value)
Set the lower end of the range of PRF values that represents 95% of
observed values, from a statistical study
|
ObservedPulseAnalysis |
withPRIAdaptiveDriverDesc(String value)
Set the condition which controls or can be associated with the signal PRI
variations (aka, interpulse modulation changes).
|
ObservedPulseAnalysis |
withPRIAdaptiveRuleDesc(String value)
Set the rule which describes the signal PRI variations (aka, interpulse
modulation changes)
|
ObservedPulseAnalysis |
withPRIAnomalousValues(String value)
Set any regularly occurring signal values which do not fit in any of the
other PRI related fields.
|
ObservedPulseAnalysis |
withPRIBasicClockPeriod(Double value)
Set the fundamental period of the emitter clock which is used to generate
the subject signal PRIs
|
ObservedPulseAnalysis |
withPRIChangeRate(Double value)
Set the PRI change per unit of time, measured over a significant portion of
the waveform.
|
ObservedPulseAnalysis |
withPRIContinuous(ListCBO value)
Set In Data Item PRIContinuous (US), Indicate whether pulse-to-pulse PRI
variations are Discrete or Continuous.
|
ObservedPulseAnalysis |
withPRICountdown(Integer value)
Set the integer (aka, count or countdown) associated with the PRI Crystal
value to provide the Pattern Period.
|
ObservedPulseAnalysis |
withPRICountdownKey(Integer value)
Set the integer (aka, count or countdown) used to generate the PRI from the
PRI Crystal value.
|
ObservedPulseAnalysis |
withPRIExtremeMax(Double value)
Set the maximum observed PRI value, from a statistical study of a 100% data
set.
|
ObservedPulseAnalysis |
withPRIExtremeMin(Double value)
Set the minimum observed PRI value, from a statistical study of a 100% data
set.
|
ObservedPulseAnalysis |
withPRIFramePeriod(Double value)
Set the time difference between a point on the leading edge of the frame
marker (or an alternate pulse in the frame), to the similar point on the
leading edge of the frame marker (or the alternate pulse) in the
next/consecutive frame.
|
ObservedPulseAnalysis |
withPRIFrameRate(Double value)
Set the rate of frame generation during the Pulse Repetition Interval.
|
ObservedPulseAnalysis |
withPRIGroupPulseSpacing(Double value)
Set the time difference between a point on the leading edge of the subframe
marker (or an alternate pulse in the subframe), to the similar point on the
leading edge of the subframe marker (or the alternate pulse in the
subframe) in the next/consecutive frame.
|
ObservedPulseAnalysis |
withPRIGroupSpacing(Double value)
Set the PRI between two groups of pulses which both have constant but
different PRIs (aka, the PRI between consecutive PRI dwell groups).
|
ObservedPulseAnalysis |
withPRIMean(Double value)
Set the average PRI value for a signal which changes PRI values on a
non-patterned basis.
|
ObservedPulseAnalysis |
withPRIMedian(Double value)
Set the observed PRI value that the signal most often used based on
statistical study of a data set.
|
ObservedPulseAnalysis |
withPRIMedianCountdowns(String value)
Set the observed PRI Crystal Counts used to generate the PRIs used most
often by the signal, based on statistical study of a data set.
|
ObservedPulseAnalysis |
withPRIPatternPeriod(Double value)
Set the time duration for one complete cycle of a repeating PRI sequence.
|
ObservedPulseAnalysis |
withPRIPatternType(ListUS7 value)
Set whether the PRI is unmodulated or pulse-to-pulse PRI variations are
Patterned, Non-Patterned, or Adaptive.
|
ObservedPulseAnalysis |
withPRIPulsesPerGroup(Integer value)
Set the number of pulses in a pulse group.
|
ObservedPulseAnalysis |
withPRISequenceDesc(String value)
Set a free text description of the PRI Sequence.
|
ObservedPulseAnalysis |
withPRIStability(Double value)
Set the variation of a mean PRI value measured from one time to another
time
|
ObservedPulseAnalysis |
withPRIStabilitySamplePeriod(Double value)
Set the time interval used to determine the PRI stability value.
|
ObservedPulseAnalysis |
withPRIStdDev(Double value)
Set the standard deviation associated with the data set used to calculate
the values entered in the PRI Mean fields
|
ObservedPulseAnalysis |
withPRIStep(Double value)
Set the delta between the Most Probable observed PRI values of adjacent and
discrete PRI.
|
ObservedPulseAnalysis |
withPRISubframePeriod(Double value)
Set the time difference between a point on the leading edge of the subframe
marker (or an alternate pulse in the subframe), to the similar point on the
leading edge of the subframe marker (or the alternate pulse in the
subframe) in the next/consecutive frame.
|
ObservedPulseAnalysis |
withPRISubframeRate(Double value)
Set the number of subframes detected during each PRI Subframe period.
|
ObservedPulseAnalysis |
withPRITimingShift(Double value)
Set the PRI timing shift value, on Emitters with repeated timing shifts of
a predictable magnitude, but not predictable timing.
|
ObservedPulseAnalysis |
withPRITypicalMax(Double value)
Set the upper end of the range of PRI values that represent 95% of the
signal observed PRI values, from a statistical study of a data set.
|
ObservedPulseAnalysis |
withPRITypicalMin(Double value)
Set the lower end of the range of PRI values that represent 95% of the
signal observed PRI values, from a statistical study of a data set.
|
ObservedPulseAnalysis |
withRiseTime(Double value)
Set the time required for a pulse to rise from 10% to 90 percent of the
mean peak amplitude of the voltage pattern.
|
public microsecs getFallTime()
microsecs
instancepublic void setFallTime(microsecs value)
value
- a microsecs
instancepublic boolean isSetFallTime()
public UN6 getNumPDPositions()
UN6
instancepublic void setNumPDPositions(UN6 value)
value
- a UN6
instancepublic boolean isSetNumPDPositions()
public UN6 getNumPDValues()
UN6
instancepublic void setNumPDValues(UN6 value)
value
- a UN6
instancepublic boolean isSetNumPDValues()
public UN6 getNumPRIElements()
UN6
instancepublic void setNumPRIElements(UN6 value)
value
- a UN6
instancepublic boolean isSetNumPRIElements()
public UN6 getNumPRIPositions()
UN6
instancepublic void setNumPRIPositions(UN6 value)
value
- a UN6
instancepublic boolean isSetNumPRIPositions()
public S500 getPDAdaptiveRuleDesc()
S500
instancepublic void setPDAdaptiveRuleDesc(S500 value)
value
- a S500
instancepublic boolean isSetPDAdaptiveRuleDesc()
public TString getPDContinuous()
TString
data typepublic void setPDContinuous(TString value)
value
- the PDContinuous value in a TString
data typepublic boolean isSetPDContinuous()
If configured this method also inspects the TString
wrapped value.
public microsecs getPDDwellMax()
[XSL ERR MINMAX] If US:PDDwellMax is used, it MUST be greater than US:PDDwellMin..
microsecs
instancepublic void setPDDwellMax(microsecs value)
[XSL ERR MINMAX] If US:PDDwellMax is used, it MUST be greater than US:PDDwellMin..
value
- a microsecs
instancepublic boolean isSetPDDwellMax()
public microsecs getPDDwellMin()
microsecs
instancepublic void setPDDwellMin(microsecs value)
value
- a microsecs
instancepublic boolean isSetPDDwellMin()
public microsecs getPDExtremeMax()
[XSL ERR MINMAX] If US:PDExtremeMax is used, it MUST be greater than US:PDExtremeMin..
microsecs
instancepublic void setPDExtremeMax(microsecs value)
[XSL ERR MINMAX] If US:PDExtremeMax is used, it MUST be greater than US:PDExtremeMin..
value
- a microsecs
instancepublic boolean isSetPDExtremeMax()
public microsecs getPDExtremeMin()
microsecs
instancepublic void setPDExtremeMin(microsecs value)
value
- a microsecs
instancepublic boolean isSetPDExtremeMin()
public microsecs getPDMax()
[XSL ERR MINMAX] If US:PDMax is used, it MUST be greater than US:PDMin..
microsecs
instancepublic void setPDMax(microsecs value)
[XSL ERR MINMAX] If US:PDMax is used, it MUST be greater than US:PDMin..
value
- a microsecs
instancepublic boolean isSetPDMax()
public microsecs getPDMean()
microsecs
instancepublic void setPDMean(microsecs value)
value
- a microsecs
instancepublic boolean isSetPDMean()
public microsecs getPDMedian()
microsecs
instancepublic void setPDMedian(microsecs value)
value
- a microsecs
instancepublic boolean isSetPDMedian()
public microsecs getPDMin()
microsecs
instancepublic void setPDMin(microsecs value)
value
- a microsecs
instancepublic boolean isSetPDMin()
public microsecs getPDPatternPeriod()
microsecs
instancepublic void setPDPatternPeriod(microsecs value)
value
- a microsecs
instancepublic boolean isSetPDPatternPeriod()
public TString getPDPatternType()
TString
data typepublic void setPDPatternType(TString value)
value
- the PDPatternType value in a TString
data typepublic boolean isSetPDPatternType()
If configured this method also inspects the TString
wrapped value.
public S500 getPDSequenceDesc()
S500
instancepublic void setPDSequenceDesc(S500 value)
value
- a S500
instancepublic boolean isSetPDSequenceDesc()
public microsecs getPDStdDev()
microsecs
instancepublic void setPDStdDev(microsecs value)
value
- a microsecs
instancepublic boolean isSetPDStdDev()
public microsecs getPDStep()
microsecs
instancepublic void setPDStep(microsecs value)
value
- a microsecs
instancepublic boolean isSetPDStep()
public microsecs getPDTypicalMax()
[XSL ERR MINMAX] If US:PDTypicalMax is used, it MUST be greater than US:PDTypicalMin..
microsecs
instancepublic void setPDTypicalMax(microsecs value)
[XSL ERR MINMAX] If US:PDTypicalMax is used, it MUST be greater than US:PDTypicalMin..
value
- a microsecs
instancepublic boolean isSetPDTypicalMax()
public microsecs getPDTypicalMin()
microsecs
instancepublic void setPDTypicalMin(microsecs value)
value
- a microsecs
instancepublic boolean isSetPDTypicalMin()
public US_PRIChgRate getPRFChangeRate()
US_PRIChgRate
instancepublic void setPRFChangeRate(US_PRIChgRate value)
value
- a US_PRIChgRate
instancepublic boolean isSetPRFChangeRate()
public US_PPS getPRFExtremeMax()
[XSL ERR MINMAX] If US:PRFExtremeMax is used, it MUST be greater than US:PRFExtremeMin..
US_PPS
instancepublic void setPRFExtremeMax(US_PPS value)
[XSL ERR MINMAX] If US:PRFExtremeMax is used, it MUST be greater than US:PRFExtremeMin..
value
- a US_PPS
instancepublic boolean isSetPRFExtremeMax()
public US_PPS getPRFExtremeMin()
US_PPS
instancepublic void setPRFExtremeMin(US_PPS value)
value
- a US_PPS
instancepublic boolean isSetPRFExtremeMin()
public US_PPS getPRFMax()
[XSL ERR MINMAX] If US:PRFMax is used, it MUST be greater than US:PRFMin..
US_PPS
instancepublic void setPRFMax(US_PPS value)
[XSL ERR MINMAX] If US:PRFMax is used, it MUST be greater than US:PRFMin..
value
- a US_PPS
instancepublic boolean isSetPRFMax()
public US_PPS getPRFMin()
US_PPS
instancepublic void setPRFMin(US_PPS value)
value
- a US_PPS
instancepublic boolean isSetPRFMin()
public US_PPS getPRFTypicalMax()
[XSL ERR MINMAX] If US:PRFTypicalMax is used, it MUST be greater than US:PRFTypicalMin..
US_PPS
instancepublic void setPRFTypicalMax(US_PPS value)
[XSL ERR MINMAX] If US:PRFTypicalMax is used, it MUST be greater than US:PRFTypicalMin..
value
- a US_PPS
instancepublic boolean isSetPRFTypicalMax()
public US_PPS getPRFTypicalMin()
US_PPS
instancepublic void setPRFTypicalMin(US_PPS value)
value
- a US_PPS
instancepublic boolean isSetPRFTypicalMin()
public S500 getPRIAdaptiveDriverDesc()
S500
instancepublic void setPRIAdaptiveDriverDesc(S500 value)
value
- a S500
instancepublic boolean isSetPRIAdaptiveDriverDesc()
public S500 getPRIAdaptiveRuleDesc()
S500
instancepublic void setPRIAdaptiveRuleDesc(S500 value)
value
- a S500
instancepublic boolean isSetPRIAdaptiveRuleDesc()
public S500 getPRIAnomalousValues()
S500
instancepublic void setPRIAnomalousValues(S500 value)
value
- a S500
instancepublic boolean isSetPRIAnomalousValues()
public microsecs getPRIBasicClockPeriod()
microsecs
instancepublic void setPRIBasicClockPeriod(microsecs value)
value
- a microsecs
instancepublic boolean isSetPRIBasicClockPeriod()
public US_PRIChgRate getPRIChangeRate()
US_PRIChgRate
instancepublic void setPRIChangeRate(US_PRIChgRate value)
value
- a US_PRIChgRate
instancepublic boolean isSetPRIChangeRate()
public TString getPRIContinuous()
TString
data typepublic void setPRIContinuous(TString value)
value
- the PRIContinuous value in a TString
data typepublic boolean isSetPRIContinuous()
If configured this method also inspects the TString
wrapped value.
public UN6 getPRICountdown()
UN6
instancepublic void setPRICountdown(UN6 value)
value
- a UN6
instancepublic boolean isSetPRICountdown()
public UN9 getPRICountdownKey()
UN9
instancepublic void setPRICountdownKey(UN9 value)
value
- a UN9
instancepublic boolean isSetPRICountdownKey()
public microsecs getPRIExtremeMax()
[XSL ERR MINMAX] If US:PRIExtremeMax is used, it MUST be greater than US:PRIExtremeMin..
microsecs
instancepublic void setPRIExtremeMax(microsecs value)
[XSL ERR MINMAX] If US:PRIExtremeMax is used, it MUST be greater than US:PRIExtremeMin..
value
- a microsecs
instancepublic boolean isSetPRIExtremeMax()
public microsecs getPRIExtremeMin()
microsecs
instancepublic void setPRIExtremeMin(microsecs value)
value
- a microsecs
instancepublic boolean isSetPRIExtremeMin()
public microsecs getPRIFramePeriod()
microsecs
instancepublic void setPRIFramePeriod(microsecs value)
value
- a microsecs
instancepublic boolean isSetPRIFramePeriod()
public FreqM getPRIFrameRate()
FreqM
instancepublic void setPRIFrameRate(FreqM value)
value
- a FreqM
instancepublic boolean isSetPRIFrameRate()
public microsecs getPRIGroupPulseSpacing()
microsecs
instancepublic void setPRIGroupPulseSpacing(microsecs value)
value
- a microsecs
instancepublic boolean isSetPRIGroupPulseSpacing()
public microsecs getPRIGroupSpacing()
microsecs
instancepublic void setPRIGroupSpacing(microsecs value)
value
- a microsecs
instancepublic boolean isSetPRIGroupSpacing()
public microsecs getPRIMean()
microsecs
instancepublic void setPRIMean(microsecs value)
value
- a microsecs
instancepublic boolean isSetPRIMean()
public microsecs getPRIMedian()
microsecs
instancepublic void setPRIMedian(microsecs value)
value
- a microsecs
instancepublic boolean isSetPRIMedian()
public S100 getPRIMedianCountdowns()
S100
instancepublic void setPRIMedianCountdowns(S100 value)
value
- a S100
instancepublic boolean isSetPRIMedianCountdowns()
public microsecs getPRIPatternPeriod()
microsecs
instancepublic void setPRIPatternPeriod(microsecs value)
value
- a microsecs
instancepublic boolean isSetPRIPatternPeriod()
public TString getPRIPatternType()
TString
data typepublic void setPRIPatternType(TString value)
value
- the PRIPatternType value in a TString
data typepublic boolean isSetPRIPatternType()
If configured this method also inspects the TString
wrapped value.
public UN6 getPRIPulsesPerGroup()
UN6
instancepublic void setPRIPulsesPerGroup(UN6 value)
value
- a UN6
instancepublic boolean isSetPRIPulsesPerGroup()
public S500 getPRISequenceDesc()
S500
instancepublic void setPRISequenceDesc(S500 value)
value
- a S500
instancepublic boolean isSetPRISequenceDesc()
public US_PPM getPRIStability()
US_PPM
instancepublic void setPRIStability(US_PPM value)
value
- a US_PPM
instancepublic boolean isSetPRIStability()
public microsecs getPRIStabilitySamplePeriod()
microsecs
instancepublic void setPRIStabilitySamplePeriod(microsecs value)
value
- a microsecs
instancepublic boolean isSetPRIStabilitySamplePeriod()
public microsecs getPRIStdDev()
microsecs
instancepublic void setPRIStdDev(microsecs value)
value
- a microsecs
instancepublic boolean isSetPRIStdDev()
public microsecs getPRIStep()
microsecs
instancepublic void setPRIStep(microsecs value)
value
- a microsecs
instancepublic boolean isSetPRIStep()
public microsecs getPRISubframePeriod()
microsecs
instancepublic void setPRISubframePeriod(microsecs value)
value
- a microsecs
instancepublic boolean isSetPRISubframePeriod()
public FreqM getPRISubframeRate()
FreqM
instancepublic void setPRISubframeRate(FreqM value)
value
- a FreqM
instancepublic boolean isSetPRISubframeRate()
public microsecs getPRITimingShift()
microsecs
instancepublic void setPRITimingShift(microsecs value)
value
- a microsecs
instancepublic boolean isSetPRITimingShift()
public microsecs getPRITypicalMax()
[XSL ERR MINMAX] If US:PRITypicalMax is used, it MUST be greater than US:PRITypicalMin..
microsecs
instancepublic void setPRITypicalMax(microsecs value)
[XSL ERR MINMAX] If US:PRITypicalMax is used, it MUST be greater than US:PRITypicalMin..
value
- a microsecs
instancepublic boolean isSetPRITypicalMax()
public microsecs getPRITypicalMin()
microsecs
instancepublic void setPRITypicalMin(microsecs value)
value
- a microsecs
instancepublic boolean isSetPRITypicalMin()
public microsecs getRiseTime()
microsecs
instancepublic void setRiseTime(microsecs value)
value
- a microsecs
instancepublic boolean isSetRiseTime()
public Set<ObservedPulseValues> getObservedPulseValues()
Complex element ObservedPulseValues (US) contains data describing the distinct Pulse values related to the Modulation Type..
ObservedPulseValues
instancepublic boolean isSetObservedPulseValues()
public void unsetObservedPulseValues()
public ObservedPulseAnalysis withFallTime(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withNumPDPositions(Integer value)
value
- An instances of type Integer
.public ObservedPulseAnalysis withNumPDValues(Integer value)
value
- An instances of type Integer
.public ObservedPulseAnalysis withNumPRIElements(Integer value)
value
- An instances of type Integer
.public ObservedPulseAnalysis withNumPRIPositions(Integer value)
value
- An instances of type Integer
.public ObservedPulseAnalysis withPDAdaptiveRuleDesc(String value)
value
- An instances of type String
.public ObservedPulseAnalysis withPDContinuous(ListCBO value)
value
- An instances of type ListCBO
.public ObservedPulseAnalysis withPDDwellMax(Double value)
[XSL ERR MINMAX] If US:PDDwellMax is used, it MUST be greater than US:PDDwellMin.
value
- An instances of type Double
.public ObservedPulseAnalysis withPDDwellMin(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPDExtremeMax(Double value)
[XSL ERR MINMAX] If US:PDExtremeMax is used, it MUST be greater than US:PDExtremeMin.
value
- An instances of type Double
.public ObservedPulseAnalysis withPDExtremeMin(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPDMax(Double value)
[XSL ERR MINMAX] If US:PDMax is used, it MUST be greater than US:PDMin.
value
- An instances of type Double
.public ObservedPulseAnalysis withPDMean(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPDMedian(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPDMin(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPDPatternPeriod(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPDPatternType(ListUS7 value)
value
- An instances of type ListUS7
.public ObservedPulseAnalysis withPDSequenceDesc(String value)
value
- An instances of type String
.public ObservedPulseAnalysis withPDStdDev(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPDStep(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPDTypicalMax(Double value)
[XSL ERR MINMAX] If US:PDTypicalMax is used, it MUST be greater than US:PDTypicalMin.
value
- An instances of type Double
.public ObservedPulseAnalysis withPDTypicalMin(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRFChangeRate(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRFExtremeMax(Double value)
[XSL ERR MINMAX] If US:PRFExtremeMax is used, it MUST be greater than US:PRFExtremeMin.
value
- An instances of type Double
.public ObservedPulseAnalysis withPRFExtremeMin(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRFMax(Double value)
[XSL ERR MINMAX] If US:PRFMax is used, it MUST be greater than US:PRFMin.
value
- An instances of type Double
.public ObservedPulseAnalysis withPRFMin(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRFTypicalMax(Double value)
[XSL ERR MINMAX] If US:PRFTypicalMax is used, it MUST be greater than US:PRFTypicalMin.
value
- An instances of type Double
.public ObservedPulseAnalysis withPRFTypicalMin(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIAdaptiveDriverDesc(String value)
value
- An instances of type String
.public ObservedPulseAnalysis withPRIAdaptiveRuleDesc(String value)
value
- An instances of type String
.public ObservedPulseAnalysis withPRIAnomalousValues(String value)
value
- An instances of type String
.public ObservedPulseAnalysis withPRIBasicClockPeriod(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIChangeRate(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIContinuous(ListCBO value)
value
- An instances of type ListCBO
.public ObservedPulseAnalysis withPRICountdown(Integer value)
value
- An instances of type Integer
.public ObservedPulseAnalysis withPRICountdownKey(Integer value)
value
- An instances of type Integer
.public ObservedPulseAnalysis withPRIExtremeMax(Double value)
[XSL ERR MINMAX] If US:PRIExtremeMax is used, it MUST be greater than US:PRIExtremeMin.
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIExtremeMin(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIFramePeriod(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIFrameRate(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIGroupPulseSpacing(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIGroupSpacing(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIMean(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIMedian(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIMedianCountdowns(String value)
value
- An instances of type String
.public ObservedPulseAnalysis withPRIPatternPeriod(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIPatternType(ListUS7 value)
value
- An instances of type ListUS7
.public ObservedPulseAnalysis withPRIPulsesPerGroup(Integer value)
value
- An instances of type Integer
.public ObservedPulseAnalysis withPRISequenceDesc(String value)
value
- An instances of type String
.public ObservedPulseAnalysis withPRIStability(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIStabilitySamplePeriod(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIStdDev(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRIStep(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRISubframePeriod(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRISubframeRate(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRITimingShift(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withPRITypicalMax(Double value)
[XSL ERR MINMAX] If US:PRITypicalMax is used, it MUST be greater than US:PRITypicalMin.
value
- An instances of type Double
.public ObservedPulseAnalysis withPRITypicalMin(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withRiseTime(Double value)
value
- An instances of type Double
.public ObservedPulseAnalysis withObservedPulseValues(ObservedPulseValues... values)
Complex element ObservedPulseValues (US) contains data describing the distinct Pulse values related to the Modulation Type.
values
- One or more instances of type ObservedPulseValues...
.public ObservedPulseAnalysis withObservedPulseValues(Collection<ObservedPulseValues> values)
Complex element ObservedPulseValues (US) contains data describing the distinct Pulse values related to the Modulation Type.
values
- A collection of ObservedPulseValues
instancespublic String toString()
public boolean isSet()
ObservedPulseAnalysis
has no configuration requirements.
Copyright © 2016 OpenSSRF.org. All rights reserved.