Modifier and Type | Field and Description |
---|---|
protected TString |
AsgnFreqBase.freqUse |
protected TString |
Common.redacted
In Data Item Redacted (US), indicate if any original, or authoritative,
data was omitted.
|
protected TString |
Common.state
State - Dataset Status (Optional)
|
Modifier and Type | Method and Description |
---|---|
TString |
Administrative.getAction()
Get the action which triggered the transmission, or to be performed upon
reception, of this dataset..
|
TString |
Note.getAdministration()
Get the nation or regulatory body that administers this note..
|
TString |
IntfReport.getAffectedCSA()
Get the responsible Combatant Commander for the geographic area where the
interference occurred and/or the victim's organization..
|
TString |
Antenna.getAntType()
Get the type of antenna..
|
TString |
Assignment.getAssignmentAuthority()
Get the user acceptance of host-nation or NATO HQ frequency nominations..
|
TString |
IntfReport.getCharacteristics()
Get the interference characteristics..
|
TString |
ForceElement.getCmdLevel()
Get the organisational level of the force element according to stratum,
echelon or point at which authority or control is maintained..
|
TString |
Location.getCountry()
Get the country or area code.
|
TString |
Role.getCountry()
Get the country to which the Role belongs.
|
TString |
SSRequest.getCurrentStage()
Get the current stage of the system..
|
TString |
Assignment.getDataSource()
Get the source or organization from which the data record was received..
|
TString |
ExternalReference.getDocumentCls()
Get the classification level of the Reference..
|
TString |
Transmitter.getDuplexSepType()
Get if the frequency separation must be exactly, or at the minimum, the
amount specified..
|
TString |
Receiver.getDuplexSepType()
Get if the frequency separation must be exactly, or at the minimum, the
amount specified..
|
TString |
SSRequest.getEmergency()
Get "Yes" if the system may be used in a case of emergency..
|
TString |
RFSystem.getEmergency()
Get "Yes" if the system may be used in a case of emergency..
|
TString |
Assignment.getEmergency()
Get "Yes" if the system may be used in a case of emergency..
|
TString |
IntfReport.getEvaluation()
Get your best guess as to the cause of the interference..
|
TString |
RFSystem.getFieldedStatus()
Get the current stage of the RFSystem..
|
TString |
AsgnFreqBase.getFreqUse()
Get .
|
TString |
Antenna.getGeneric()
Get "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model..
|
TString |
Transmitter.getGeneric()
Get "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model..
|
TString |
Receiver.getGeneric()
Get "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model..
|
TString |
IntfReport.getGPSAffected()
Get whether the interference affects GPS reception..
|
TString |
IntfReport.getHelpRequired()
Get whether the user needs technical assistance from another organisation
to solve the interference.
|
TString |
Antenna.getHorzSidelobeSuppressed()
Get if the sidelobe has been suppressed.
|
TString |
IntfReport.getIntfPeriod()
Get how often the interference is experienced..
|
TString |
ExternalReference.getIsAttached()
Get if the document, file or other "external" information is stored in
attachment to this message..
|
TString |
ExternalReference.getIsClassified()
Get if the referenced information contains any classified data..
|
TString |
SSRequest.getITUWaiver()
Get if this is a satellite system that is exempt from submitting
notification to the Radiocommunication Bureau..
|
TString |
Satellite.getLaunchStatus()
Get the status of the satellite..
|
TString |
ForceElement.getMissionCode()
Get the mission code representing the primary mission of the Force Element
(e.g.,Training, Finance, etc)..
|
TString |
Assignment.getNATOPooledFrequencyCode()
Get the Type Special Assignment for the frequency assignment..
|
TString |
SSRequest.getNTIACoordinationRequired()
Get if this application requires coordination with the National Authority
for approval.
|
TString |
SSRequest.getOperInvIntent()
Get if the system is intended for the DoD operational inventory..
|
TString |
Satellite.getOrbitType()
Get the type of orbit..
|
TString |
Transmitter.getOutputDeviceType()
Get the type of the device.
|
TString |
ForceElement.getOwningCountry()
Get the owning country or body of the ForceElement..
|
TString |
Assignment.getPeriod()
Get the general period on a daily basis when the frequency assignment
frequencies will be either guarded (monitored) or used for transmission..
|
TString |
ForceElement.getPlatform()
Get the type of platform..
|
TString |
Assignment.getPrimaryStation()
Get .
|
TString |
Assignment.getProcessing()
Get if the frequency assignment is to be approved at the national or
international level..
|
TString |
Common.getRedacted()
Get In Data Item Redacted (US), indicate if any original, or authoritative,
data was omitted.
|
TString |
ExternalReference.getReferencedStage()
Get the spectrum certification stage associated with this information..
|
TString |
ExternalReference.getRepeat()
Get In Data Item Repeat (US), indicate if the attached file should be
repeatedly viewed / listened to..
|
TString |
SSReply.getReplyingCountry()
Get the code of the country providing the reply..
|
TString |
ForceElement.getRole()
Get the code used to document the main role of the Force Element.
|
TString |
Assignment.getRoutineAgendaItem()
Get the type of National Telecommunications and Information Administration
(NTIA) Frequency Assignment Subcommittee (FAS) agenda on which the
application will be processed.
|
TString |
IntfReport.getSATCOMPriority()
Get the satellite communication priority..
|
TString |
IntfReport.getSatelliteAffected()
Get whether the interference affects satellite reception..
|
TString |
IntfReport.getSatelliteDownlinkPolarisation()
Get the polarisation of the satellite downlink signal..
|
TString |
IntfReport.getSatelliteHemisphere()
Get the satellite hemisphere..
|
TString |
IntfReport.getSatelliteUplinkPolarisation()
Get the polarisation of the satellite uplink signal..
|
TString |
Message.getSecondaryDatasets()
Get In Data Item SecondaryDatasets, indicate if datasets referenced by the
primary dataset are included..
|
TString |
Antenna.getShape()
Get a code used to describe the general shape of the antenna reflector..
|
TString |
Common.getState()
Get the state of the dataset.
|
TString |
SSReply.getSupportabilityCode()
Get the overall result of the national analysis.
|
TString |
Organisation.getType()
Get the type of relationship..
|
TString |
ForceElement.getType()
Get if the Force Element is a Unit or a Platform..
|
TString |
FEDeployment.getType()
Get the type of deployment..
|
TString |
ExternalReference.getType()
Get the type of information referenced by this external reference..
|
TString |
Assignment.getTypeOfService()
Get the type of service or circuit involved..
|
TString |
Assignment.getUsageCode()
Get the usage and category of circuits..
|
TString |
Assignment.getUsageFrequency()
Get the general amount of time when the frequency assignment frequencies
will be either guarded (monitored) or used for transmission..
|
TString |
Allotment.getUsageType()
Get the type of assignment request or approved assignment/allotment.
|
TString |
Assignment.getUsageType()
Get the type of assignment request or approved assignment or allotment.
|
TString |
Antenna.getVertSidelobeSuppressed()
Get whether a portion of the radiation from an antenna outside of the main
beam has been suppressed or eliminated...
|
TString |
IntfReport.getVictimCountry()
Get the country or area where the victim of the interference is located..
|
TString |
SSRequest.getWartimeUse()
Get if the system is used in a wartime environment..
|
Modifier and Type | Method and Description |
---|---|
void |
Administrative.setAction(TString value)
Set the action which triggered the transmission, or to be performed upon
reception, of this dataset..
|
void |
Note.setAdministration(TString value)
Set the nation or regulatory body that administers this note..
|
void |
IntfReport.setAffectedCSA(TString value)
Set the responsible Combatant Commander for the geographic area where the
interference occurred and/or the victim's organization..
|
void |
Antenna.setAntType(TString value)
Set the type of antenna..
|
void |
Assignment.setAssignmentAuthority(TString value)
Set the user acceptance of host-nation or NATO HQ frequency nominations..
|
void |
IntfReport.setCharacteristics(TString value)
Set the interference characteristics..
|
void |
ForceElement.setCmdLevel(TString value)
Set the organisational level of the force element according to stratum,
echelon or point at which authority or control is maintained..
|
void |
Location.setCountry(TString value)
Set the country or area code.
|
void |
Role.setCountry(TString value)
Set the country to which the Role belongs.
|
void |
SSRequest.setCurrentStage(TString value)
Set the current stage of the system..
|
void |
Assignment.setDataSource(TString value)
Set the source or organization from which the data record was received..
|
void |
ExternalReference.setDocumentCls(TString value)
Set the classification level of the Reference..
|
void |
Transmitter.setDuplexSepType(TString value)
Set if the frequency separation must be exactly, or at the minimum, the
amount specified..
|
void |
Receiver.setDuplexSepType(TString value)
Set if the frequency separation must be exactly, or at the minimum, the
amount specified..
|
void |
SSRequest.setEmergency(TString value)
Set "Yes" if the system may be used in a case of emergency..
|
void |
RFSystem.setEmergency(TString value)
Set "Yes" if the system may be used in a case of emergency..
|
void |
Assignment.setEmergency(TString value)
Set "Yes" if the system may be used in a case of emergency..
|
void |
IntfReport.setEvaluation(TString value)
Set your best guess as to the cause of the interference..
|
void |
RFSystem.setFieldedStatus(TString value)
Set the current stage of the RFSystem..
|
void |
AsgnFreqBase.setFreqUse(TString value)
Set .
|
void |
Antenna.setGeneric(TString value)
Set "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model..
|
void |
Transmitter.setGeneric(TString value)
Set "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model..
|
void |
Receiver.setGeneric(TString value)
Set "Yes" to indicate that the dataset describes typical parameters of a
waveform or standard signal, or a generic antenna model, rather than a
specific equipment model..
|
void |
IntfReport.setGPSAffected(TString value)
Set whether the interference affects GPS reception..
|
void |
IntfReport.setHelpRequired(TString value)
Set whether the user needs technical assistance from another organisation
to solve the interference.
|
void |
Antenna.setHorzSidelobeSuppressed(TString value)
Set if the sidelobe has been suppressed.
|
void |
IntfReport.setIntfPeriod(TString value)
Set how often the interference is experienced..
|
void |
ExternalReference.setIsAttached(TString value)
Set if the document, file or other "external" information is stored in
attachment to this message..
|
void |
ExternalReference.setIsClassified(TString value)
Set if the referenced information contains any classified data..
|
void |
SSRequest.setITUWaiver(TString value)
Set if this is a satellite system that is exempt from submitting
notification to the Radiocommunication Bureau..
|
void |
Satellite.setLaunchStatus(TString value)
Set the status of the satellite..
|
void |
ForceElement.setMissionCode(TString value)
Set the mission code representing the primary mission of the Force Element
(e.g.,Training, Finance, etc)..
|
void |
Assignment.setNATOPooledFrequencyCode(TString value)
Set the Type Special Assignment for the frequency assignment..
|
void |
SSRequest.setNTIACoordinationRequired(TString value)
Set if this application requires coordination with the National Authority
for approval.
|
void |
SSRequest.setOperInvIntent(TString value)
Set if the system is intended for the DoD operational inventory..
|
void |
Satellite.setOrbitType(TString value)
Set the type of orbit..
|
void |
Transmitter.setOutputDeviceType(TString value)
Set the type of the device.
|
void |
ForceElement.setOwningCountry(TString value)
Set the owning country or body of the ForceElement..
|
void |
Assignment.setPeriod(TString value)
Set the general period on a daily basis when the frequency assignment
frequencies will be either guarded (monitored) or used for transmission..
|
void |
ForceElement.setPlatform(TString value)
Set the type of platform..
|
void |
Assignment.setPrimaryStation(TString value)
Set .
|
void |
Assignment.setProcessing(TString value)
Set if the frequency assignment is to be approved at the national or
international level..
|
void |
Common.setRedacted(TString value)
Set In Data Item Redacted (US), indicate if any original, or authoritative,
data was omitted.
|
void |
ExternalReference.setReferencedStage(TString value)
Set the spectrum certification stage associated with this information..
|
void |
ExternalReference.setRepeat(TString value)
Set In Data Item Repeat (US), indicate if the attached file should be
repeatedly viewed / listened to..
|
void |
SSReply.setReplyingCountry(TString value)
Set the code of the country providing the reply..
|
void |
ForceElement.setRole(TString value)
Set the code used to document the main role of the Force Element.
|
void |
Assignment.setRoutineAgendaItem(TString value)
Set the type of National Telecommunications and Information Administration
(NTIA) Frequency Assignment Subcommittee (FAS) agenda on which the
application will be processed.
|
void |
IntfReport.setSATCOMPriority(TString value)
Set the satellite communication priority..
|
void |
IntfReport.setSatelliteAffected(TString value)
Set whether the interference affects satellite reception..
|
void |
IntfReport.setSatelliteDownlinkPolarisation(TString value)
Set the polarisation of the satellite downlink signal..
|
void |
IntfReport.setSatelliteHemisphere(TString value)
Set the satellite hemisphere..
|
void |
IntfReport.setSatelliteUplinkPolarisation(TString value)
Set the polarisation of the satellite uplink signal..
|
void |
Message.setSecondaryDatasets(TString value)
Set In Data Item SecondaryDatasets, indicate if datasets referenced by the
primary dataset are included..
|
void |
Antenna.setShape(TString value)
Set a code used to describe the general shape of the antenna reflector..
|
void |
Common.setState(TString value)
Set the state of the dataset.
|
void |
SSReply.setSupportabilityCode(TString value)
Set the overall result of the national analysis.
|
void |
Organisation.setType(TString value)
Set the type of relationship..
|
void |
ForceElement.setType(TString value)
Set if the Force Element is a Unit or a Platform..
|
void |
FEDeployment.setType(TString value)
Set the type of deployment..
|
void |
ExternalReference.setType(TString value)
Set the type of information referenced by this external reference..
|
void |
Assignment.setTypeOfService(TString value)
Set the type of service or circuit involved..
|
void |
Assignment.setUsageCode(TString value)
Set the usage and category of circuits..
|
void |
Assignment.setUsageFrequency(TString value)
Set the general amount of time when the frequency assignment frequencies
will be either guarded (monitored) or used for transmission..
|
void |
Allotment.setUsageType(TString value)
Set the type of assignment request or approved assignment/allotment.
|
void |
Assignment.setUsageType(TString value)
Set the type of assignment request or approved assignment or allotment.
|
void |
Antenna.setVertSidelobeSuppressed(TString value)
Set whether a portion of the radiation from an antenna outside of the main
beam has been suppressed or eliminated...
|
void |
IntfReport.setVictimCountry(TString value)
Set the country or area where the victim of the interference is located..
|
void |
SSRequest.setWartimeUse(TString value)
Set if the system is used in a wartime environment..
|
Modifier and Type | Method and Description |
---|---|
TString |
AXmlAdapterTString.unmarshal(String v)
Convert a value type to a bound type.
|
Modifier and Type | Method and Description |
---|---|
String |
AXmlAdapterTString.marshal(TString v)
Convert a bound type to a value type.
|
Modifier and Type | Method and Description |
---|---|
TString |
CodeList.getAction()
Get the intended type of modification to the given code list..
|
TString |
CodeList.getOrigin()
Get the country or organisation which is using the modified or new code..
|
Modifier and Type | Method and Description |
---|---|
void |
CodeList.setAction(TString value)
Set the intended type of modification to the given code list..
|
void |
CodeList.setOrigin(TString value)
Set the country or organisation which is using the modified or new code..
|
Modifier and Type | Method and Description |
---|---|
TString |
POCInformation.getType()
Get the function of the referenced Contact or Organisation within the
current dataset..
|
TString |
Project.getType()
Get the type of project..
|
Modifier and Type | Method and Description |
---|---|
void |
POCInformation.setType(TString value)
Set the function of the referenced Contact or Organisation within the
current dataset..
|
void |
Project.setType(TString value)
Set the type of project..
|
Modifier and Type | Method and Description |
---|---|
TString |
AntMode.getBeamType()
Get one of the codes describing the shape or type of the antenna main
beam..
|
TString |
ObservedLobeAnalysis.getBeamType()
Get In Data Item BeamType (US), indicate the pattern beam type that best
represents the general shape of the beam as it radiates from the antenna.
|
TString |
AntPattern.getCalculated()
Get Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
|
TString |
AntGain.getCalculated()
Get Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
|
TString |
AntHardware.getConnectorType()
Get the type of connector used to attach the antenna to the equipment or
the antenna to the transmission media that attaches the equipment to the
antenna..
|
TString |
Manufacturer.getCountry()
Get the country or area in which the Manufacturer has its Headquarters..
|
TString |
UsingCountries.getCountryName()
Get the designator for a specific country associated with the emitter that
transmits the subject Notation/Signal.
|
TString |
AntPattern.getCutType()
Get the type of the pattern cut.
|
TString |
AntHardware.getFeedType()
Get the element used to "illuminate" the reflector for an antenna unit..
|
TString |
AntFreqs.getFreqUse()
Get if the frequency range is used for transmit, receive, or both transmit
and receive..
|
TString |
AntMode.getHorzScanType()
Get the antenna horizontal scanning capability..
|
TString |
AntHardware.getLeadType()
Get the type of device used for conducting or guiding the radio-frequency
energy from the transmitter or receiver to the antenna (e.g., continuous
waveguide)..
|
TString |
Nomenclature.getLevel()
Get the level of nomenclature (primary, nickname, etc)..
|
TString |
ObservedLobeAnalysis.getLobeSymmetric()
Get In Data Item LobeSymmetric (US), indicate whether the sidelobe is
symmetric..
|
TString |
AntMode.getModeUse()
Get In Data Item ModeUse, indicate if the mode is used for transmit,
receive, or both transmit and receive..
|
TString |
AntMode.getMotionType()
Get the general category for the movement of a scanning or tracking
antenna..
|
TString |
Nomenclature.getPhysicalUsage()
Get In Data Item PhysicalUsage (US), indicate the type of vehicle or other
entity that uses the equipment, or from which the subject signal emanates..
|
TString |
ObservedPolarisationAnalysis.getPolarisationDirection()
Get the direction in which the polarisation ellipse is mechanically
rotating.
|
TString |
ObservedPolarisationAnalysis.getPolarisationSense()
Get the rotation direction of the radiated electromagnetic wave electric
field (E-field) vector (E) relative to the direction of propagation.
|
TString |
AntMode.getPolarisationType()
Get the principal orientation of the electric field of the electromagnetic
wave for an antenna..
|
TString |
ObservedPolarisationAnalysis.getPolarisationType()
Get the polarisation of the radio wave referenced to the direction of
propagation..
|
TString |
UsingCountries.getRole()
Get the role of the country associated with the emitter that transmits the
subject Notation/Signal..
|
TString |
AntMode.getRotationDirection()
Get the antenna direction of rotation or motion..
|
TString |
ObservedScanAnalysis.getScanElevContinuous()
Get In Data Item ScanElevContinuous (US), indicate the if the scan
elevation progression is a continuous sweep..
|
TString |
ObservedScanAnalysis.getScanPatternType()
Get In Data Item ScanPatternType (US), indicate whether the Scan Period is
unmodulated, Patterned, Non-Patterned, or Adaptive..
|
TString |
ObservedScanAnalysis.getScansHorzContinuous()
Get In Data Item ScanHorzContinuous (US), indicate the if the scan azimuth
progression is a continuous sweep..
|
TString |
ObservedScanAnalysis.getScanType()
Get In Data Item ScanType (US), indicate if the observed data was detected
via a primary or secondary scan..
|
TString |
AntMode.getSectBlanking()
Get "Yes" if sector blanking is possible and "No" if it is not possible..
|
TString |
ObservedPolarisationAnalysis.getTiltAngleContinuous()
Get whether the tilt angle variations are Discrete or Continuous.
|
TString |
ObservedPolarisationAnalysis.getTiltAnglePatternType()
Get In Data Item TiltAnglePatternType (US), indicate whether Tilt Angle is
unmodulated or Tilt Angle variations are Patterned, Non-Patterned, or
Adaptive..
|
TString |
Nomenclature.getType()
Get the type of nomenclature (commercial, military, etc)..
|
TString |
AntPattern.getType()
Get the type of the pattern cut.
|
TString |
AntMode.getVertScanType()
Get the antenna vertical scanning capability..
|
Modifier and Type | Method and Description |
---|---|
void |
AntMode.setBeamType(TString value)
Set one of the codes describing the shape or type of the antenna main
beam..
|
void |
ObservedLobeAnalysis.setBeamType(TString value)
Set In Data Item BeamType (US), indicate the pattern beam type that best
represents the general shape of the beam as it radiates from the antenna.
|
void |
AntPattern.setCalculated(TString value)
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
|
void |
AntGain.setCalculated(TString value)
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
|
void |
AntHardware.setConnectorType(TString value)
Set the type of connector used to attach the antenna to the equipment or
the antenna to the transmission media that attaches the equipment to the
antenna..
|
void |
Manufacturer.setCountry(TString value)
Set the country or area in which the Manufacturer has its Headquarters..
|
void |
UsingCountries.setCountryName(TString value)
Set the designator for a specific country associated with the emitter that
transmits the subject Notation/Signal.
|
void |
AntPattern.setCutType(TString value)
Set the type of the pattern cut.
|
void |
AntHardware.setFeedType(TString value)
Set the element used to "illuminate" the reflector for an antenna unit..
|
void |
AntFreqs.setFreqUse(TString value)
Set if the frequency range is used for transmit, receive, or both transmit
and receive..
|
void |
AntMode.setHorzScanType(TString value)
Set the antenna horizontal scanning capability..
|
void |
AntHardware.setLeadType(TString value)
Set the type of device used for conducting or guiding the radio-frequency
energy from the transmitter or receiver to the antenna (e.g., continuous
waveguide)..
|
void |
Nomenclature.setLevel(TString value)
Set the level of nomenclature (primary, nickname, etc)..
|
void |
ObservedLobeAnalysis.setLobeSymmetric(TString value)
Set In Data Item LobeSymmetric (US), indicate whether the sidelobe is
symmetric..
|
void |
AntMode.setModeUse(TString value)
Set In Data Item ModeUse, indicate if the mode is used for transmit,
receive, or both transmit and receive..
|
void |
AntMode.setMotionType(TString value)
Set the general category for the movement of a scanning or tracking
antenna..
|
void |
Nomenclature.setPhysicalUsage(TString value)
Set In Data Item PhysicalUsage (US), indicate the type of vehicle or other
entity that uses the equipment, or from which the subject signal emanates..
|
void |
ObservedPolarisationAnalysis.setPolarisationDirection(TString value)
Set the direction in which the polarisation ellipse is mechanically
rotating.
|
void |
ObservedPolarisationAnalysis.setPolarisationSense(TString value)
Set the rotation direction of the radiated electromagnetic wave electric
field (E-field) vector (E) relative to the direction of propagation.
|
void |
AntMode.setPolarisationType(TString value)
Set the principal orientation of the electric field of the electromagnetic
wave for an antenna..
|
void |
ObservedPolarisationAnalysis.setPolarisationType(TString value)
Set the polarisation of the radio wave referenced to the direction of
propagation..
|
void |
UsingCountries.setRole(TString value)
Set the role of the country associated with the emitter that transmits the
subject Notation/Signal..
|
void |
AntMode.setRotationDirection(TString value)
Set the antenna direction of rotation or motion..
|
void |
ObservedScanAnalysis.setScanElevContinuous(TString value)
Set In Data Item ScanElevContinuous (US), indicate the if the scan
elevation progression is a continuous sweep..
|
void |
ObservedScanAnalysis.setScanPatternType(TString value)
Set In Data Item ScanPatternType (US), indicate whether the Scan Period is
unmodulated, Patterned, Non-Patterned, or Adaptive..
|
void |
ObservedScanAnalysis.setScansHorzContinuous(TString value)
Set In Data Item ScanHorzContinuous (US), indicate the if the scan azimuth
progression is a continuous sweep..
|
void |
ObservedScanAnalysis.setScanType(TString value)
Set In Data Item ScanType (US), indicate if the observed data was detected
via a primary or secondary scan..
|
void |
AntMode.setSectBlanking(TString value)
Set "Yes" if sector blanking is possible and "No" if it is not possible..
|
void |
ObservedPolarisationAnalysis.setTiltAngleContinuous(TString value)
Set whether the tilt angle variations are Discrete or Continuous.
|
void |
ObservedPolarisationAnalysis.setTiltAnglePatternType(TString value)
Set In Data Item TiltAnglePatternType (US), indicate whether Tilt Angle is
unmodulated or Tilt Angle variations are Patterned, Non-Patterned, or
Adaptive..
|
void |
Nomenclature.setType(TString value)
Set the type of nomenclature (commercial, military, etc)..
|
void |
AntPattern.setType(TString value)
Set the type of the pattern cut.
|
void |
AntMode.setVertScanType(TString value)
Set the antenna vertical scanning capability..
|
Modifier and Type | Method and Description |
---|---|
TString |
CoordinationData.getCoordIndicator()
Get the coordinating entity..
|
TString |
StationConfig.getEarthCoverage()
Get the area of earth coverage..
|
TString |
Tuning.getExclusive()
Get Yes if the assigned frequency should not be reused within the area of
exercise/operation..
|
TString |
Tuning.getFreqSepType()
Get if the stated frequency separation is an exact or minimum value..
|
TString |
Link.getFunction()
Get Data item Function is not used by US except when exchanging with NATO.
|
TString |
Link.getIntermediateFunction()
Get .
|
TString |
Assigned.getITURegStatus()
Get the status of the Assignment ITU-R registration..
|
TString |
StationLoc.getLocationExcluded()
Get "Yes" to indicate that the LocSatRef is to be excluded from the
location set for the current station.
|
TString |
Link.getMajorFunction()
Get the major (or primary) function of the frequency assignment..
|
TString |
AsgnAllotOwner.getOwnerType()
Get the relationship of an individual or organization to the frequency
assignment..
|
TString |
Configuration.getPowerType()
Get the power type code for carrier, mean, or peak envelope power emitted.
|
TString |
Station.getPrimaryStation()
Get whether this station is the station of primary regulatory interest..
|
TString |
Configuration.getRepeater()
Get "Yes" for each receiver location when a station in the fixed or mobile
service is used primarily as a repeater..
|
TString |
Configuration.getSpectrumLink()
Get whether the transmitter(s) communicate or interact with the receiver(s)
in this Configuration, i.e.
|
TString |
StationConfig.getType()
Get whether the StationConfig is acting as a transmitter, receiver or
transceiver..
|
Modifier and Type | Method and Description |
---|---|
void |
CoordinationData.setCoordIndicator(TString value)
Set the coordinating entity..
|
void |
StationConfig.setEarthCoverage(TString value)
Set the area of earth coverage..
|
void |
Tuning.setExclusive(TString value)
Set Yes if the assigned frequency should not be reused within the area of
exercise/operation..
|
void |
Tuning.setFreqSepType(TString value)
Set if the stated frequency separation is an exact or minimum value..
|
void |
Link.setFunction(TString value)
Set Data item Function is not used by US except when exchanging with NATO.
|
void |
Link.setIntermediateFunction(TString value)
Set .
|
void |
Assigned.setITURegStatus(TString value)
Set the status of the Assignment ITU-R registration..
|
void |
StationLoc.setLocationExcluded(TString value)
Set "Yes" to indicate that the LocSatRef is to be excluded from the
location set for the current station.
|
void |
Link.setMajorFunction(TString value)
Set the major (or primary) function of the frequency assignment..
|
void |
AsgnAllotOwner.setOwnerType(TString value)
Set the relationship of an individual or organization to the frequency
assignment..
|
void |
Configuration.setPowerType(TString value)
Set the power type code for carrier, mean, or peak envelope power emitted.
|
void |
Station.setPrimaryStation(TString value)
Set whether this station is the station of primary regulatory interest..
|
void |
Configuration.setRepeater(TString value)
Set "Yes" for each receiver location when a station in the fixed or mobile
service is used primarily as a repeater..
|
void |
Configuration.setSpectrumLink(TString value)
Set whether the transmitter(s) communicate or interact with the receiver(s)
in this Configuration, i.e.
|
void |
StationConfig.setType(TString value)
Set whether the StationConfig is acting as a transmitter, receiver or
transceiver..
|
Modifier and Type | Method and Description |
---|---|
TString |
CaseNum.getCountry()
Get the nation or body who provided or assigned the case number..
|
TString |
Downgrade.getDowncls()
Get the classification level of the dataset after downgrading..
|
Modifier and Type | Method and Description |
---|---|
void |
CaseNum.setCountry(TString value)
Set the nation or body who provided or assigned the case number..
|
void |
Downgrade.setDowncls(TString value)
Set the classification level of the dataset after downgrading..
|
Modifier and Type | Method and Description |
---|---|
TString |
Address.getCountry()
Get the country or area code.
|
TString |
TelephoneFax.getFax()
Get "Yes" if the number is for a telefax.
|
TString |
TelephoneFax.getMaxCls()
Get the highest classification that can be used on the network.
|
TString |
EMail.getMaxCls()
Get the highest classification that can be used for the email address..
|
TString |
TelephoneFax.getPreferred()
Get a code "Yes" for the preferred number(s) and a code "No" for the
others..
|
TString |
EMail.getPreferred()
Get a code "Yes" for the preferred address(es) and a code "No" for the
others.
|
Modifier and Type | Method and Description |
---|---|
void |
Address.setCountry(TString value)
Set the country or area code.
|
void |
TelephoneFax.setFax(TString value)
Set "Yes" if the number is for a telefax.
|
void |
TelephoneFax.setMaxCls(TString value)
Set the highest classification that can be used on the network.
|
void |
EMail.setMaxCls(TString value)
Set the highest classification that can be used for the email address..
|
void |
TelephoneFax.setPreferred(TString value)
Set a code "Yes" for the preferred number(s) and a code "No" for the
others..
|
void |
EMail.setPreferred(TString value)
Set a code "Yes" for the preferred address(es) and a code "No" for the
others.
|
Modifier and Type | Method and Description |
---|---|
TString |
JRFLEntry.getApprovalLevel()
Get the approval status of the JRFL entry..
|
TString |
JRFLEntry.getFreqUse()
Get the intended usage of the frequency..
|
TString |
JRFLEntry.getProtectionCode()
Get In Data Item ProtectionCode, indicate the type of JRFL entry..
|
Modifier and Type | Method and Description |
---|---|
void |
JRFLEntry.setApprovalLevel(TString value)
Set the approval status of the JRFL entry..
|
void |
JRFLEntry.setFreqUse(TString value)
Set the intended usage of the frequency..
|
void |
JRFLEntry.setProtectionCode(TString value)
Set In Data Item ProtectionCode, indicate the type of JRFL entry..
|
Modifier and Type | Method and Description |
---|---|
TString |
JammingChannelProfile.getDirection()
Get the sweep direction from the center frequency..
|
TString |
JammingChannelProfile.getExBlankingOn()
Get In Data Item ExBlankingOn (US), indicate if external blanking is
enabled..
|
TString |
TimingDeconflictionProtocol.getRanking()
Get the ranking level of the timing deconfliction protocol..
|
TString |
TimingDeconflictionProtocol.getRequired()
Get if a common timing deconfliction protocol is required for processing
the subject signal.
|
Modifier and Type | Method and Description |
---|---|
void |
JammingChannelProfile.setDirection(TString value)
Set the sweep direction from the center frequency..
|
void |
JammingChannelProfile.setExBlankingOn(TString value)
Set In Data Item ExBlankingOn (US), indicate if external blanking is
enabled..
|
void |
TimingDeconflictionProtocol.setRanking(TString value)
Set the ranking level of the timing deconfliction protocol..
|
void |
TimingDeconflictionProtocol.setRequired(TString value)
Set if a common timing deconfliction protocol is required for processing
the subject signal.
|
Modifier and Type | Method and Description |
---|---|
TString |
Point.getExcluded()
Get "Yes" to indicate that the shape is to be excluded from the set.
|
TString |
Ellipse.getExcluded()
Get "Yes" to indicate that the shape is to be excluded from the set.
|
TString |
Polygon.getExcluded()
Get "Yes" to indicate that the shape is to be excluded from the set.
|
Modifier and Type | Method and Description |
---|---|
void |
Point.setExcluded(TString value)
Set "Yes" to indicate that the shape is to be excluded from the set.
|
void |
Ellipse.setExcluded(TString value)
Set "Yes" to indicate that the shape is to be excluded from the set.
|
void |
Polygon.setExcluded(TString value)
Set "Yes" to indicate that the shape is to be excluded from the set.
|
Modifier and Type | Method and Description |
---|---|
TString |
TString.withValue(String value)
Sets the value of the value property.
|
Modifier and Type | Method and Description |
---|---|
int |
TString.compareTo(TString o)
Comparison and sorting is alphabetical based upon the String value.
|
Modifier and Type | Method and Description |
---|---|
TString |
ConfigFreq.getConfigFreqUse()
Get .
|
TString |
ObservedERPAnalysis.getContinuous()
Get In Data Item Continuous (US), indicate whether pulse-to-pulse ERP
variations are Discrete or Continuous.
|
TString |
Usage.getEqpFnct()
Get the equipment function..
|
TString |
ObservedERPAnalysis.getERPPatternType()
Get In Data Item ERPPatternType (US), indicate whether ERP is unmodulated
ERP variations are Patterned, Non-Patterned, or Adaptive..
|
TString |
ConfigFreq.getInBand()
Get "Yes" if this frequency range is in compliance with the applicable
Frequency Allocation Table.
|
TString |
ConfigFreq.getPriority()
Get if this spectrum use is Primary, Secondary or Permitted, as defined by
the system use and the appropriate Administration Frequency Allocation
Table/guidance..
|
TString |
Usage.getRadioService()
Get the Radiocommunication Service associated with the frequency usage in
this configuration.
|
TString |
Notation.getStatus()
Get the status of the future, prior, or associated, Notation..
|
TString |
NotationTimeline.getStatus()
Get the status of the future, prior, or associated, Notation..
|
TString |
Usage.getStnClass()
Get the station class, as defined by the appropriate Administration..
|
TString |
PotentialVictims.getType()
Get the type of Notation.
|
TString |
Notation.getType()
Get the type of Notation..
|
TString |
NotationTimeline.getType()
Get the type of Notation..
|
Modifier and Type | Method and Description |
---|---|
void |
ConfigFreq.setConfigFreqUse(TString value)
Set .
|
void |
ObservedERPAnalysis.setContinuous(TString value)
Set In Data Item Continuous (US), indicate whether pulse-to-pulse ERP
variations are Discrete or Continuous.
|
void |
Usage.setEqpFnct(TString value)
Set the equipment function..
|
void |
ObservedERPAnalysis.setERPPatternType(TString value)
Set In Data Item ERPPatternType (US), indicate whether ERP is unmodulated
ERP variations are Patterned, Non-Patterned, or Adaptive..
|
void |
ConfigFreq.setInBand(TString value)
Set "Yes" if this frequency range is in compliance with the applicable
Frequency Allocation Table.
|
void |
ConfigFreq.setPriority(TString value)
Set if this spectrum use is Primary, Secondary or Permitted, as defined by
the system use and the appropriate Administration Frequency Allocation
Table/guidance..
|
void |
Usage.setRadioService(TString value)
Set the Radiocommunication Service associated with the frequency usage in
this configuration.
|
void |
Notation.setStatus(TString value)
Set the status of the future, prior, or associated, Notation..
|
void |
NotationTimeline.setStatus(TString value)
Set the status of the future, prior, or associated, Notation..
|
void |
Usage.setStnClass(TString value)
Set the station class, as defined by the appropriate Administration..
|
void |
PotentialVictims.setType(TString value)
Set the type of Notation.
|
void |
Notation.setType(TString value)
Set the type of Notation..
|
void |
NotationTimeline.setType(TString value)
Set the type of Notation..
|
Modifier and Type | Method and Description |
---|---|
TString |
RelatedOrganisation.getRelation()
Get the relationship between the two organisations..
|
TString |
RelatedOrganisation.getType()
Get the type of relationship..
|
Modifier and Type | Method and Description |
---|---|
void |
RelatedOrganisation.setRelation(TString value)
Set the relationship between the two organisations..
|
void |
RelatedOrganisation.setType(TString value)
Set the type of relationship..
|
Modifier and Type | Method and Description |
---|---|
TString |
JammingPerformance.getActualEffect()
Get the actual impact a jamming mission had on a specific target area..
|
TString |
JammingPerformance.getActualPerformance()
Get In Data Item US:ActualPerformance (US), enter the assessed
effectiveness of the service request..
|
TString |
JammingTarget.getAntStabilisation()
Get the method by which the jamming antenna beam is focused..
|
TString |
JammingPerformance.getContinuousUpdate()
Get if effectiveness data should be provided continually or just once..
|
TString |
JammingPerformance.getDesiredEffect()
Get the expected impact a jamming mission will have on a specific target
area..
|
TString |
JammingPerformance.getDesiredPerformance()
Get the desired effectiveness of the service request.
|
TString |
JammingAuthority.getJCAState()
Get an indication of the authorization condition for radiation of a jamming
plan..
|
TString |
JammingPlan.getLevel3Auth()
Get In Data Item Level3Auth (US), indicate if a request should go directly
to third-level authorization.
|
TString |
JammingTarget.getPolarisationType()
Get the antenna polarisation planned for the desired jamming instance..
|
TString |
JammingPlan.getPriority()
Get the relative priority of the service request..
|
TString |
JammingPlan.getRequiredEffect()
Get the desired effect of this service request..
|
TString |
JammingPlan.getRequiredPerformance()
Get the desired effectiveness of the service request.
|
TString |
JammingPlan.getStartTrigger()
Get the type of trigger that indicates when it is time to start jamming..
|
TString |
JammingPlan.getStopTrigger()
Get the type of trigger that indicates when it is time to stop jamming..
|
Modifier and Type | Method and Description |
---|---|
void |
JammingPerformance.setActualEffect(TString value)
Set the actual impact a jamming mission had on a specific target area..
|
void |
JammingPerformance.setActualPerformance(TString value)
Set In Data Item US:ActualPerformance (US), enter the assessed
effectiveness of the service request..
|
void |
JammingTarget.setAntStabilisation(TString value)
Set the method by which the jamming antenna beam is focused..
|
void |
JammingPerformance.setContinuousUpdate(TString value)
Set if effectiveness data should be provided continually or just once..
|
void |
JammingPerformance.setDesiredEffect(TString value)
Set the expected impact a jamming mission will have on a specific target
area..
|
void |
JammingPerformance.setDesiredPerformance(TString value)
Set the desired effectiveness of the service request.
|
void |
JammingAuthority.setJCAState(TString value)
Set an indication of the authorization condition for radiation of a jamming
plan..
|
void |
JammingPlan.setLevel3Auth(TString value)
Set In Data Item Level3Auth (US), indicate if a request should go directly
to third-level authorization.
|
void |
JammingTarget.setPolarisationType(TString value)
Set the antenna polarisation planned for the desired jamming instance..
|
void |
JammingPlan.setPriority(TString value)
Set the relative priority of the service request..
|
void |
JammingPlan.setRequiredEffect(TString value)
Set the desired effect of this service request..
|
void |
JammingPlan.setRequiredPerformance(TString value)
Set the desired effectiveness of the service request.
|
void |
JammingPlan.setStartTrigger(TString value)
Set the type of trigger that indicates when it is time to start jamming..
|
void |
JammingPlan.setStopTrigger(TString value)
Set the type of trigger that indicates when it is time to stop jamming..
|
Modifier and Type | Method and Description |
---|---|
TString |
Curve.getCalculated()
Get Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
|
TString |
RxModulation.getDigitalModType()
Get the type of digital modulation..
|
TString |
SpreadSpectrum.getFreqBlocking()
Get if the frequency hopping system is capable of blocking certain
frequencies..
|
TString |
RxMode.getFreqToleranceUnit()
Get the units in which the Frequency Tolerance is expressed..
|
TString |
RxModulation.getLineCoding()
Get the format used to represent binary digit sequencing when digital
modulation is used..
|
TString |
FreqConversion.getOscillatorTuning()
Get the relationship between the local oscillator frequency and the RF
centre frequency..
|
TString |
RxMode.getRxType()
Get the type of receiver.
|
TString |
RxMode.getSensitivityCriteriaType()
Get the criteria used to determine the minimum RF signal power present at
the input terminals that ensures acceptable detection and demodulation of
the desired signal..
|
TString |
Baseband.getSignalShape()
Get the basic shape of the signal..
|
TString |
Baseband.getSignalType()
Get the type of modulation..
|
TString |
Deployment.getStatus()
Get the status of the Deployment..
|
TString |
RxMode.getTunability()
Get the tuning capability..
|
TString |
RxMode.getTuningMethod()
Get the device or process used to tune the equipment through the RF
spectrum..
|
TString |
SpreadSpectrum.getType()
Get the type of spread spectrum system being used..
|
TString |
Curve.getType()
Get a code defining the type of curve..
|
TString |
Deployment.getType()
Get the type of deployment..
|
Modifier and Type | Method and Description |
---|---|
void |
Curve.setCalculated(TString value)
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement.
|
void |
RxModulation.setDigitalModType(TString value)
Set the type of digital modulation..
|
void |
SpreadSpectrum.setFreqBlocking(TString value)
Set if the frequency hopping system is capable of blocking certain
frequencies..
|
void |
RxMode.setFreqToleranceUnit(TString value)
Set the units in which the Frequency Tolerance is expressed..
|
void |
RxModulation.setLineCoding(TString value)
Set the format used to represent binary digit sequencing when digital
modulation is used..
|
void |
FreqConversion.setOscillatorTuning(TString value)
Set the relationship between the local oscillator frequency and the RF
centre frequency..
|
void |
RxMode.setRxType(TString value)
Set the type of receiver.
|
void |
RxMode.setSensitivityCriteriaType(TString value)
Set the criteria used to determine the minimum RF signal power present at
the input terminals that ensures acceptable detection and demodulation of
the desired signal..
|
void |
Baseband.setSignalShape(TString value)
Set the basic shape of the signal..
|
void |
Baseband.setSignalType(TString value)
Set the type of modulation..
|
void |
Deployment.setStatus(TString value)
Set the status of the Deployment..
|
void |
RxMode.setTunability(TString value)
Set the tuning capability..
|
void |
RxMode.setTuningMethod(TString value)
Set the device or process used to tune the equipment through the RF
spectrum..
|
void |
SpreadSpectrum.setType(TString value)
Set the type of spread spectrum system being used..
|
void |
Curve.setType(TString value)
Set a code defining the type of curve..
|
void |
Deployment.setType(TString value)
Set the type of deployment..
|
Modifier and Type | Method and Description |
---|---|
TString |
RelatedSystem.getRelation()
Get the relationship between the two systems..
|
Modifier and Type | Method and Description |
---|---|
void |
RelatedSystem.setRelation(TString value)
Set the relationship between the two systems..
|
Modifier and Type | Method and Description |
---|---|
TString |
EarthStation.getType()
Get if this is a specific or typical earth station..
|
Modifier and Type | Method and Description |
---|---|
void |
EarthStation.setType(TString value)
Set if this is a specific or typical earth station..
|
Modifier and Type | Method and Description |
---|---|
TString |
StageLocation.getExcluded()
Get "Yes" to indicate that the shape is to be excluded from the set.
|
Modifier and Type | Method and Description |
---|---|
void |
StageLocation.setExcluded(TString value)
Set "Yes" to indicate that the shape is to be excluded from the set.
|
Modifier and Type | Method and Description |
---|---|
TString |
EndpointLocation.getExcluded()
Get whether the referenced Location is included or excluded at this diagram
endpoint..
|
TString |
DiagramEndpoint.getIconType()
Get the type of icon for the diagram endpoint..
|
TString |
TrunkingAssignment.getIsRelinquished()
Get the Yes if this is an existing assignment to be relinquished by the
trunked land mobile system.
|
TString |
Time.getPeriod()
Get the period of usage..
|
TString |
DiagramEndpoint.getPointToMultiPoint()
Get "Yes" if the diagram endpoint participates in point-to-multipoint
links.
|
TString |
Trunking.getRequestForExpansion()
Get if this application is a request for expansion..
|
TString |
RelatedSupportability.getType()
Get the type of dependency between the current dataset and the referred
application..
|
TString |
Stage.getType()
Get the stage..
|
Modifier and Type | Method and Description |
---|---|
void |
EndpointLocation.setExcluded(TString value)
Set whether the referenced Location is included or excluded at this diagram
endpoint..
|
void |
DiagramEndpoint.setIconType(TString value)
Set the type of icon for the diagram endpoint..
|
void |
TrunkingAssignment.setIsRelinquished(TString value)
Set the Yes if this is an existing assignment to be relinquished by the
trunked land mobile system.
|
void |
Time.setPeriod(TString value)
Set the period of usage..
|
void |
DiagramEndpoint.setPointToMultiPoint(TString value)
Set "Yes" if the diagram endpoint participates in point-to-multipoint
links.
|
void |
Trunking.setRequestForExpansion(TString value)
Set if this application is a request for expansion..
|
void |
RelatedSupportability.setType(TString value)
Set the type of dependency between the current dataset and the referred
application..
|
void |
Stage.setType(TString value)
Set the stage..
|
Modifier and Type | Method and Description |
---|---|
TString |
Allocation.getAllocatedByFootnote()
Get "Yes" if this service is allocated to this frequency band by footnote
(i.e., the only indication this service is allowed in this band is a
footnote).
|
TString |
Variance.getAllocatedService()
Get a radiocommunication service recognized by an administration that is
allocated to this frequency band (e.g., "Fixed Service")..
|
TString |
Allocation.getAllocatedService()
Get a radiocommunication service recognized by an administration that is
allocated to this frequency band (e.g., "Fixed Service")..
|
TString |
Footnote.getFootnoteType()
Get the type or source of the Footnote..
|
TString |
Variance.getPriority()
Get if this service is a primary or secondary use of this band.
|
TString |
Allocation.getPriority()
Get if this service is a primary or secondary use of this band.
|
TString |
Variance.getType()
Get the type of variance..
|
Modifier and Type | Method and Description |
---|---|
void |
Allocation.setAllocatedByFootnote(TString value)
Set "Yes" if this service is allocated to this frequency band by footnote
(i.e., the only indication this service is allowed in this band is a
footnote).
|
void |
Variance.setAllocatedService(TString value)
Set a radiocommunication service recognized by an administration that is
allocated to this frequency band (e.g., "Fixed Service")..
|
void |
Allocation.setAllocatedService(TString value)
Set a radiocommunication service recognized by an administration that is
allocated to this frequency band (e.g., "Fixed Service")..
|
void |
Footnote.setFootnoteType(TString value)
Set the type or source of the Footnote..
|
void |
Variance.setPriority(TString value)
Set if this service is a primary or secondary use of this band.
|
void |
Allocation.setPriority(TString value)
Set if this service is a primary or secondary use of this band.
|
void |
Variance.setType(TString value)
Set the type of variance..
|
Modifier and Type | Method and Description |
---|---|
TString |
Power.getCalculated()
Get "Yes" if the power value(s) have been calculated, or "No" if they have
been measured..
|
TString |
TxModulation.getFMDeviationCode()
Get the code that indicates the type of Root Mean Square (RMS) deviation
(multichannel or per-channel)..
|
TString |
TxMode.getFreqToleranceUnit()
Get the units in which the Frequency Tolerance is expressed..
|
TString |
TxMode.getJitterCapable()
Get In Data Item JitterCapable (US), indicate whether the mode of the pulse
stream is jitter capable..
|
TString |
TxMode.getModulationType()
Get the type of modulation..
|
TString |
ObservedMOPAnalysis.getMOPContinuous()
Get In Data Item US:MOPContinuous (US), indicate whether MOP or CW
modulation is Discrete or Continuous..
|
TString |
ObservedMOPAnalysis.getMOPPatternType()
Get In Data Item US:MOPPatternType (US), indicate whether MOP or CW
characteristics are Patterned, Non-Patterned, Adaptive, or Unmodulated..
|
TString |
ObservedMOPAnalysis.getMOPType()
Get In Data Item MOPType (US), indicate if the information imprinted on the
pulse is modulated by amplitude (AM), frequency (FM), phase (PM), or is a
continuous wave (CW)..
|
TString |
TxMode.getOccBwCalculated()
Get Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement..
|
TString |
ObservedPulseAnalysis.getPDContinuous()
Get In Data Item PDContinuous (US), indicate whether pulse-to-pulse PD
variations are Discrete or Continuous.
|
TString |
ObservedPulseAnalysis.getPDPatternType()
Get In Data Item PDPatternType (US), Indicate whether PD is unmodulated or
pulse-to-pulse PD variations are Patterned, Non-Patterned, or Adaptive..
|
TString |
Power.getPowerType()
Get the power type code for carrier, mean, or peak envelope power emitted.
|
TString |
ObservedPulseAnalysis.getPRIContinuous()
Get In Data Item PRIContinuous (US), Indicate whether pulse-to-pulse PRI
variations are Discrete or Continuous.
|
TString |
ObservedPulseAnalysis.getPRIPatternType()
Get whether the PRI is unmodulated or pulse-to-pulse PRI variations are
Patterned, Non-Patterned, or Adaptive..
|
TString |
TxMode.getRadarType()
Get the type of radar..
|
TString |
ObservedRFAnalysis.getRFCoherent()
Get In Data Item RFCoherent (US), indicate if the observed RF signal is
coherent, non-coherent, or unknown..
|
TString |
ObservedRFAnalysis.getRFContinuous()
Get whether pulse-to-pulse RF variations are Discrete or Continuous.
|
TString |
ObservedRFAnalysis.getRFFreqToleranceUnit()
Get the units in which the Frequency Tolerance is expressed..
|
TString |
ObservedRFAnalysis.getRFPatternType()
Get In Data Item RFPatternType (US), Indicate whether RF is unmodulated or
pulse-to-pulse RF variations are Patterned, Non-Patterned, or Adaptive..
|
TString |
TxModulation.getSidebandSuppressed()
Get the sideband that is suppressed in a single sideband signal..
|
TString |
ObservedMOPAnalysis.getSignalType()
Get In Data Item SignalType (US), indicate the specific type of modulation
used/detected..
|
TString |
TxMode.getTunability()
Get the tuning capability..
|
TString |
TxMode.getTuningMethod()
Get the device or process used to tune the equipment through the RF
spectrum..
|
Modifier and Type | Method and Description |
---|---|
void |
Power.setCalculated(TString value)
Set "Yes" if the power value(s) have been calculated, or "No" if they have
been measured..
|
void |
TxModulation.setFMDeviationCode(TString value)
Set the code that indicates the type of Root Mean Square (RMS) deviation
(multichannel or per-channel)..
|
void |
TxMode.setFreqToleranceUnit(TString value)
Set the units in which the Frequency Tolerance is expressed..
|
void |
TxMode.setJitterCapable(TString value)
Set In Data Item JitterCapable (US), indicate whether the mode of the pulse
stream is jitter capable..
|
void |
TxMode.setModulationType(TString value)
Set the type of modulation..
|
void |
ObservedMOPAnalysis.setMOPContinuous(TString value)
Set In Data Item US:MOPContinuous (US), indicate whether MOP or CW
modulation is Discrete or Continuous..
|
void |
ObservedMOPAnalysis.setMOPPatternType(TString value)
Set In Data Item US:MOPPatternType (US), indicate whether MOP or CW
characteristics are Patterned, Non-Patterned, Adaptive, or Unmodulated..
|
void |
ObservedMOPAnalysis.setMOPType(TString value)
Set In Data Item MOPType (US), indicate if the information imprinted on the
pulse is modulated by amplitude (AM), frequency (FM), phase (PM), or is a
continuous wave (CW)..
|
void |
TxMode.setOccBwCalculated(TString value)
Set Yes to indicate that the data was calculated, or "No" if the data is
issued from measurement..
|
void |
ObservedPulseAnalysis.setPDContinuous(TString value)
Set In Data Item PDContinuous (US), indicate whether pulse-to-pulse PD
variations are Discrete or Continuous.
|
void |
ObservedPulseAnalysis.setPDPatternType(TString value)
Set In Data Item PDPatternType (US), Indicate whether PD is unmodulated or
pulse-to-pulse PD variations are Patterned, Non-Patterned, or Adaptive..
|
void |
Power.setPowerType(TString value)
Set the power type code for carrier, mean, or peak envelope power emitted.
|
void |
ObservedPulseAnalysis.setPRIContinuous(TString value)
Set In Data Item PRIContinuous (US), Indicate whether pulse-to-pulse PRI
variations are Discrete or Continuous.
|
void |
ObservedPulseAnalysis.setPRIPatternType(TString value)
Set whether the PRI is unmodulated or pulse-to-pulse PRI variations are
Patterned, Non-Patterned, or Adaptive..
|
void |
TxMode.setRadarType(TString value)
Set the type of radar..
|
void |
ObservedRFAnalysis.setRFCoherent(TString value)
Set In Data Item RFCoherent (US), indicate if the observed RF signal is
coherent, non-coherent, or unknown..
|
void |
ObservedRFAnalysis.setRFContinuous(TString value)
Set whether pulse-to-pulse RF variations are Discrete or Continuous.
|
void |
ObservedRFAnalysis.setRFFreqToleranceUnit(TString value)
Set the units in which the Frequency Tolerance is expressed..
|
void |
ObservedRFAnalysis.setRFPatternType(TString value)
Set In Data Item RFPatternType (US), Indicate whether RF is unmodulated or
pulse-to-pulse RF variations are Patterned, Non-Patterned, or Adaptive..
|
void |
TxModulation.setSidebandSuppressed(TString value)
Set the sideband that is suppressed in a single sideband signal..
|
void |
ObservedMOPAnalysis.setSignalType(TString value)
Set In Data Item SignalType (US), indicate the specific type of modulation
used/detected..
|
void |
TxMode.setTunability(TString value)
Set the tuning capability..
|
void |
TxMode.setTuningMethod(TString value)
Set the device or process used to tune the equipment through the RF
spectrum..
|
Copyright © 2016 OpenSSRF.org. All rights reserved.